基于热中子探测评价裂缝的示踪剂特性研究

针对裂缝热中子示踪探测方法,从中子双组扩散理论入手结合蒙特卡洛数值模拟方法,分析压裂前后地层热中子分布影响因素,并模拟不同类型示踪剂及含量的热中子裂缝响应规律,筛选最佳示踪剂并给出其在支撑剂中含量的上、下限。结果表明:压裂前后热中子计数变化量主要受裂缝宽度和标记支撑剂中示踪剂含量的影响;钆对裂缝宽度变化反应最灵敏,钆元素是作为标记支撑剂的最佳示踪元素;随支撑剂中Gd 2O 3含量的增加,热中子计数率降低,热中子计数变化量D增加;示踪剂中氧化钆的上、下限值随裂缝宽度呈指数降低,且当裂缝宽度为1.0 cm时,Gd 2O 3的质量分数上限为0.68%,下限为0.03%。     

基于电阻阵的红外图像实时生成和显示系统

对基于MOS电阻阵列红外图像转换器的红外图像实时生成和显示系统的实现进行了重点论述。根据红外图像仿真原理对典型目标建模,并利用openGL和开发的图像转换等软件,完成目标动态图像数据序列的计算机生成;论述了基于128×128电阻阵列的红外图像数据处理与驱动控制技术,实现了目标动态红外亮度图像向目标动态灰度图像的转换,并利用驱动控制系统以200Hz的帧频速度驱动MOS电阻阵实时生成目标动态红外图像。该系统已在红外成像目标仿真中得到应用。     

浅谈抓好市政工程项目施工质量管理

工程项目质量管理是工程项目管理工作的重要组成部分，它是工程项目从施工准备到交付使用的全过程中为保证和提高工程质量所进行的各项组织管理工作。文章从提高质量意识、实行质量管理目标、建立质量体系和制度等方面对搞好市政工程项目施工的质量管理工作进行了探讨。     

育种目标性状间的同一关系分析方法研究

借助集对分析理论,提出了一种新的育种目标性状间的关系分析方法,阐明了其基本原理与分析步骤,并结合小麦育种实例,介绍了这种分析方法的具体应用。在此基础上,讨论了这种分析方法的优越性及尚待改进之处。表3,参9。     

热轧圆钢外径的激光在线检测研讨

本文报导热轧圆钢激光在线检测外径的阶段性研究结果，给出仪器研制原理及光机结构设计同仪器精度关系的研讨．     

一种基于数字水印的错误检测和定位技术

为了增强视频通信系统在有误码信道的适应能力 ,提出了一种基于数字水印技术的错误检测方法 ,使得解码器可以对误码块进行有效的补偿。其原理为编码器在量化后离散余弦变换 (DCT)系数中嵌入易碎的数字水印 ,解码器可以通过提取水印从而确认错误以及错误发生的首宏块位置。仿真结果证明 :在信道误码率为 5× 10 - 4时 ,与常用的基于语法的方法相比 ,本方法的错误检测率是其的 1.32～ 1.82倍 ,错误正确定位率是其的 2 .95～ 5 .32倍 ,而且 PSNR只有微弱降低 ,同时算法复杂度很低     

否定毛细永动机的唯象理论

本文从毛细现象自身所满足的规律、弯曲液面所具有的性质着手，给出了一种否定毛细永动机的唯象理论。     

The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

非惯性系中变质量力学系统的变分原理及应用

利用附加惯性力的方法建立了非惯性系中变质量力学系统的Gauss变分原理,由此得到了非惯性系中变质量非完整系统运动方程的各种形式,最后提出了广义惯性力的广义非惯性势的概念并进一步给出上述方程的简化形式。     

A High Speed Detection Scheme for Point Targets in a Multitarget Environment

The purpose of this paper is to develop a high speed detection scheme for moving and / or stationary point targets in a multitarget environment as registered in an IR image sequence. An iterative approximate 3-D line searching algorithm based upon the geometric representation of lines (for non-maneuvering targets in space) in a 3-D space is derived. The convergency of the algorithm is proved. An analysis is performed of the theoretical detection performance of the algorithm. The statistical experiment results show high effectiveness and computational efficiency of the algorithm in the case of low SNR. The idea may be employed to satisfy the real-time processing requirement of an IR system.