仿生非光滑花纹沟对轮胎抗滑水性能的影响

以205/55R16乘用车轮胎为研究对象,采用计算流体动力学建立了考虑胎面花纹变形的轮胎滑水分析模型;以气-液二相流数值模型分析了轮胎的滑水性能,并将临界滑水速度仿真值与NASA滑水速度预测值及轮胎发生滑水时力平衡下的速度进行对比.在此基础上,引入仿生减阻理念,研究了夹角为60°、高度为0.6mm的仿生对称V形结构对花纹沟排水量和水流阻力的影响,并将其结构特征信息等效移植到接地区轮胎花纹沟底,进行了仿生花纹轮胎的滑水性能分析.结果表明:所建滑水分析模型可用来分析轮胎滑水时的流体运动特性;相对原花纹轮胎,仿生非光滑花纹沟轮胎通过提高接地区花纹沟内水流速度,降低了胎面动水压力,提高了临界滑水速度.     

An Economic Model-Based Matching Approach Between Buyers and Sellers Through a Broker in an Open E-Marketplace

A broker in an open e-marketplace enables buyers and sellers to do business with each other. Although a broker plays an important role in e-marketplaces, theory and guidelines for matching between buyers and sellers in multi-attribute exchanges are limited. Therefore, a challenge for a broker’s responsibility is how to maximize a buyer’s total satisfaction degree as its goals under the consideration of trade-off between a buyer’s buying quantity and price paid to a seller, and other attributes. To solve this challenge, this paper proposes an economic model-based matching approach between a buyer’s requirements and a seller’s offers. The major contributions of this paper are that (i) a broker can model a seller’s price policy as per a buyer’s buying quantity through communication between a broker and a seller; (ii) due to each buyer’s different quantity demand, a broker models a buyer’s satisfaction degree as per a buyer’s buying quantity based on communication between a broker and a buyer; and (iii) to carry out a broker’s matching processes, an objective function and a set of constraints are generated to help a broker to maximize a buyer’s total satisfaction degree. Experimental results demonstrate the good performance of the proposed approach.     

Study on the Centralization Strategy of the Blood Allocation Among Different Departments within a Hospital

By far, the researches on how to distribute blood products among different departments in hospital have not been further studied, though the problem of blood shortage and wastage that caused by improper blood allocation is severe, which may endanger patient’s lives and impose considerable costs on hospitals. In order to solve this problem, this paper mainly studies on how to distribute the blood items among different departments within a hospital and investigates the allocation approach with the novel management method by centralizing the inventory of several different departments. By integrating the blood inventory requirements of some departments, the hospital could reduce the rate of blood shortage and wastage effectively, release the pressure of the occupancy of resources and reduce the bullwhip effect of blood products. This paper illustrates the centralization principle in hospital and formulates the mixed integer programming model to work out the optimal allocation network scheme and the optimal inventory setting for every department. And the results of the numerical example demonstrate that this centralization method could considerably reduce blood shortage and wastage in hospital by about 72% and 90% respectively. Furthermore, it could decrease the total cost by about 108,540 RMB a month on blood supply chain management in the hospital and improve the effect of some certain surgeries by transfusing the fresh blood to patients.     

Effects of Strain Rate,Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Through molecular dynamics(MD)simulation,the dependencies of temperature,grain size and strain rate on the mechanical properties were studied.The simulation results demonstrated that the strain rate from 0.05 to 2 ns~(–1 )affected the Young’s modulus of nickel nanowires slightly,whereas the yield stress increased.The Young’s modulus decreased approximately linearly;however,the yield stress firstly increased and subsequently dropped as the temperature increased.The Young’s modulus and yield stress increased as the mean grain size increased from 2.66 to6.72 nm.Moreover,certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension.Certain phenomena such as the formation of twin structures,which were found in nanowires with larger grain size at higher strain rate and lower temperature,as well as the movement of grain boundaries and dislocation,were detected and discussed in detail.The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size.However,for larger grain size,the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.     

Fuzzy Views on Black-Litterman Portfolio Selection Model

In this paper, views of investor are described in fuzzy sets, and two fuzzy Black-Litterman models are constructed with fuzzy views and fuzzy random views respectively. In the models, expected returns and uncertainty matrix of views are redefined and the views are formulated by fuzzy approaches suitably. Then the models are tested with data from Chinese financial markets. Empirical results show that the fuzzy random views model performs the best, and both the fuzzy models are better than the traditional ones, demonstrating that the fuzzy approaches can contain more information in the views and measure the uncertainty more correctly.     

具有Logistic增长项的两种群竞争Keller-Segel模型的稳定性分析

应用线性化方法研究两种群竞争的Keller-Segel模型常数平衡解的个数及其稳定性问题.     

Aristotle Said “Happiness is a State of Activity” — Predicting Mood Through Body Sensing with Smartwatches

We measure and predict states of Activation and Happiness using a body sensing application connected to smartwatches. Through the sensors of commercially available smartwatches we collect individual mood states and correlate them with body sensing data such as acceleration, heart rate, light level data, and location, through the GPS sensor built into the smartphone connected to the smartwatch. We polled users on the smartwatch for seven weeks four times per day asking for their mood state. We found that both Happiness and Activation are negatively correlated with heart beats and with the levels of light. People tend to be happier when they are moving more intensely and are feeling less activated during weekends. We also found that people with a lower Conscientiousness and Neuroticism and higher Agreeableness tend to be happy more frequently. In addition, more Activation can be predicted by lower Openness to experience and higher Agreeableness and Conscientiousness. Lastly, we find that tracking people’s geographical coordinates might play an important role in predicting Happiness and Activation. The methodology we propose is a first step towards building an automated mood tracking system, to be used for better teamwork and in combination with social network analysis studies.     

Predicting Initial Formation Temperature for Deep Well Engineering with a New Method

With the progress of science and technology, human beings explore the energy under-ground with thousands of meters. As a thermophysical parameter, initial formation temperature (IFT) plays an essential...     

EVOKE: A Value-Driven Concept Selection Method for Early System Design

The development of new technologically advanced products requires the contribution from a range of skills and disciplines, which are often difficult to find within a single company or organization. Requirements establishment practices in Systems Engineering (SE), while ensuring coordination of activities and tasks across the supply network, fall short when it comes to facilitate knowledge sharing and negotiation during early system design. Empirical observations show that when system-level requirements are not available or not mature enough, engineers dealing with the development of long lead-time sub-systems tend to target local optima, rather than opening up the design space. This phenomenon causes design teams to generate solutions that do not embody the best possible configuration for the overall system. The aim of this paper is to show how methodologies for value-driven design may address this issue, facilitating early stage design iterations and the resolution of early stage design trade-offs. The paper describes how such methodologies may help gathering and dispatching relevant knowledge about the ‘design intent’ of a system to the cross-functional engineering teams, so to facilitate a more concurrent process for requirement elicitation in SE. The paper also describes EVOKE (Early Value Oriented design exploration with KnowledgE maturity), a concept selection method that allows benchmarking design options at sub-system level on the base of value-related information communicated by the system integrators. The use of EVOKE is exemplified in an industrial case study related to the design of an aero-engine component. EVOKE’s ability to raise awareness on the value contribution of early stage design concepts in the SE process has been further verified with industrial practitioners in ad-hoc design episodes.     

三维打印器件后处理液研究

分析了不同的填充强化剂(后处理A液)、不同的后处理B液基料、后处理B液中水性环氧乳液的掺量及后处理液浸泡时间对石膏基打印器件耐水性、抗压强度、尺寸偏差、表面微观结构的影响.结果表明:经纳米硅超硬固化剂处理后的打印器件抗压强度大幅提高,纳米硅超硬固化剂最适宜作为后处理A液;水性聚氨酯乳液PU-202B最适宜作为后处理B液的基料;后处理B液中加入水性环氧乳液,处理后打印器件的抗压强度增加、吸水率降低,但水性环氧乳液含量增加到一定程度后会出现尺寸偏差;后处理A、B液最佳浸泡时间分别为130 s和35 s;先浸泡后处理A液、后浸泡后处理B液的打印器件具有抗压强度高、吸水率小、表面较光滑、不脱粉等优良性能.