七绝圣手笔下的“愁”－－漫谈王昌龄的七言绝句

诗家夫子王晶龄笔下的七言绝句在中国古典诗歌史上享有极高声誉。笔认为，以“愁”为情感基调构筑诗篇是王昌龄之擅长。本旨在通过赏析诗人有关“愁情”的七绝，展示其独特的艺术魅力和巧夺天工的意境营造手法，并从“边愁”、“春愁”和“离愁”三方面分类评述。     

Initial organic geochemical investigation on Late Neoproterozoic-Early Cambrian sediments in the Yangtze region, China

Totally 19 samples of typical Upper Proterozoic-Lower Cambrian sedimentary rocks were collected and analyzed for an organic geochemical investigation. Almost all these rocks have high TOCs, super-maturities and similar biomarker distribution. As an exception, however, the Sinian Nantuo Tillite shows much lower TOCs and little phytane and pristane in comparison with those in other strata, which implies a very faint photosynthetic process, and a restricted euphotic zone and quite limited sunlight within the sedimentary water column during the Sinian glaciation age in the western Yangtze region providing an evidence for palaeo-oceanic environment of the Neoproterozoic Snowball Earth age.     

EFL Learning in China and the Acquisition of Culture of English-speaking Countries

This thesis is a study on the close relationship between EFL Learning in China and the acquisition of culture of English-speaking countries. First,it analyses the inticate relationship between language and. cultrue,then the causes of typical cultural mistakes made by EFL learners in China , and the goals of acquisition of culture of English ?speaking countries. Lastly, this paper puts forward four tenta tive approaches to this culture acquisition in EFL learning in China.     

Prediction and setup of phytoplankton statistical model of Qiandaohu Lake

This research considers the mathematical relationship between concentration of Chla and seven environmental factors, i.e. Lake water temperature (T), Secci-depth (SD), pH, DO, CODMn, Total Nitrogen (TN), Total Phosphorus (TP). Stepwise linear regression of 1997 to 1999 monitoring data at each sampling point of Qiandaohu Lake yielded the multivariate regression models presented in this paper. The concentration of Chla as simulation for the year 2000 by the regression model was similar to the observed value. The suggested mathematical relationship could be used to predict changes in the lakewater environment at any point in time. The results showed that SD, TP and pH were the most significant factors affecting Chla concentration.     

焊接速度对自适应双轴肩搅拌摩擦焊接Al–Mg合金接头微观组织和机械性能的影响

The butt welds of 4-mm thick 5A06 aluminum alloy plates were produced by adjustable-gap bobbin-tool friction stir travel with travel speeds of 200, 300, and 400 mm/min in this study. The microstructure was studied using optical microscopy and electron backscatter diffraction (EBSD). Tensile tests and microhardness measurements were performed to identify the effect of the travel speed on the joint mechanical properties. Sound joints were obtained at 200 mm/min while voids were present at different positions of the joints as the travel speed increased. The EBSD results show that the grain size, high angle grain boundaries, and density of geometrically necessary dislocations in different regions of the joint vary depending on the recovery and recrystallization behavior. Specific attention was given to the relationship between the local microstructure and mechanical properties. Microhardness measurements show that the average hardness of the stir zone (SZ) was greater than that of the base material, which was only affected slightly by the travel speed. The tensile strength of the joint decreased with increasing travel speed and the maximal strength efficiency reached 99%.     

Acoustic emission detection of 316L stainless steel welded joints during intergranular corrosion

This study analyzes acoustic emission (AE) signals during the intergranular corrosion (IGC) process of 316L stainless steel welded joints under different welding currents in boiling nitric acid. IGC generates several AE signals with high AE activity. The AE technique could hardly distinguish IGC in stainless steel welded joints with different welding heat inputs. However, AE signals can effectively distinguish IGC characteristics in different corrosion stages. The IGC resistance of a heat-affected zone is lower than that of a weld zone. The initiation and rapid corrosion stages can be distinguished using AE results and microstructural analysis. Moreover, energy count rate and amplitude are considered to be ideal parameters for characterizing different IGC processes. Two types of signals are detected in the rapid corrosion stage. It can be concluded that grain boundary corrosion and grain separation are the AE sources of type 1 and type 2, respectively.     

Effect of hot-dip galvanizing processes on the microstructure and mechanical properties of 600-MPa hot-dip galvanized dual-phase steel

A C-Mn dual-phase steel was soaked at 800℃ for 90 s and then either rapidly cooled to 450℃ and held for 30 s (process A) or rapidly cooled to 350℃ and then reheated to 450℃ (process B) to simulate the hot-dip galvanizing process. The influence of the hot-dip galvanizing process on the microstructure and mechanical properties of 600-MPa hot-dip galvanized dual-phase steel (DP600) was investigated using optical microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and tensile tests. The results showed that, in the case of process A, the microstructure of DP600 was composed of ferrite, martensite, and a small amount of bainite. The granular bainite was formed in the hot-dip galvanizing stage, and martensite islands were formed in the final cooling stage after hot-dip galvanizing. By contrast, in the case of process B, the microstructure of the DP600 was composed of ferrite, martensite, bainite, and cementite. In addition, compared with the yield strength (YS) of the DP600 annealed by process A, that for the DP600 annealed by process B increased by approximately 50 MPa because of the tempering of the martensite formed during rapid cooling. The work-hardening coefficient (n value) of the DP600 steel annealed by process B clearly decreased because the increase of the YS affected the computation result for the n value. However, the ultimate tensile strength (UTS) and elongation (A₈₀) of the DP600 annealed by process B exhibited less variation compared with those of the DP600 annealed by process A. Therefore, DP600 with excellent comprehensive mechanical properties (YS=362 MPa, UTS=638 MPa, A₈₀=24.3%, n=0.17) was obtained via process A.     

HF radar sea clutter rejection by nonlinear projections

1.INTRODUCTION Utilizingverticalpolarizedelectromagneticwavethat canfollowthecurvatureoftheearthalongtheair wa terinterfacewithlowpropagationlossonhighlycon ductiveoceansurface,highfrequencyground wave radar(HFGWR)isdesignedtodetectandtracktar getsbeyondthehorizonsuchasvesselsovertheseaor aircraftsatlowaltitude.Thereforemoreandmore countriesdevotemuchenergytodevelopHFGWRin recentyears.However,HFGWRhascontinuedtobe seriouslylimitedbyahighthresholdofdetectionin seaclutter.Dominatingth…     

ASP技术在Web数据库系统中的应用

介绍了ASP技术的结构、特点；详细说明了利用ASP访问Web数据库实现的方法；列举了应用ASP技术访问Web数据库的实例。