Uplift, thermal unrest and magma intrusion at Yellowstone caldera

The Yellowstone caldera, in the western United States, formed approximately 640,000 years ago when an explosive eruption ejected approximately 1,000 km3 of material. It is the youngest of a series of large calderas that formed during sequential cataclysmic eruptions that began approximately 16 million years ago in eastern Oregon and northern Nevada. The Yellowstone caldera was largely buried by rhyolite lava flows during eruptions that occurred from approximately 150,000 to approximately 70,000 years ago. Since the last eruption, Yellowstone has remained restless, with high seismicity, continuing uplift/subsidence episodes with movements of approximately 70 cm historically to several metres since the Pleistocene epoch, and intense hydrothermal activity. Here we present observations of a new mode of surface deformation in Yellowstone, based on radar interferometry observations from the European Space Agency ERS-2 satellite. We infer that the observed pattern of uplift and subsidence results from variations in the movement of molten basalt into and out of the Yellowstone volcanic system.     

尼龙-6的准韧性特征分析

通过缺口冲击、无缺口冲击及缺口拉伸实验研究了尼龙-6的准韧性特征。尼龙-6的缺口冲击表现为脆性,而无缺口冲击则表现为韧性。在尼龙-6的无缺口冲击实验中,拉伸响应区横截面因拉伸塑性变形而收缩,压缩响应区的横截面则因压缩而挤压膨胀。在尼龙-6单边缺口拉伸实验中,随着拉伸速度增加,缺口拉伸断裂发生韧脆转变,同时伴随着裂纹扩展功的急剧降低。尼龙-6准韧性特征可能主要与材料的局部应变响应速率有关。当局部应变响应速率较低时,尼龙-6的断裂表现为韧性;当局部应变响应速率较高时,尼龙-6的断裂表现为脆性。     

Intrusion triggering of the 2010 Eyjafjallajökull explosive eruption

Gradual inflation of magma chambers often precedes eruptions at highly active volcanoes. During such eruptions, rapid deflation occurs as magma flows out and pressure is reduced. Less is known about the deformation style at moderately active volcanoes, such as Eyjafjallaj?kull, Iceland, where an explosive summit eruption of trachyandesite beginning on 14 April 2010 caused exceptional disruption to air traffic, closing airspace over much of Europe for days. This eruption was preceded by an effusive flank eruption of basalt from 20 March to 12 April 2010. The 2010 eruptions are the culmination of 18?years of intermittent volcanic unrest. Here we show that deformation associated with the eruptions was unusual because it did not relate to pressure changes within a single magma chamber. Deformation was rapid before the first eruption (>5?mm per day after 4 March), but negligible during it. Lack of distinct co-eruptive deflation indicates that the net volume of magma drained from shallow depth during this eruption was small; rather, magma flowed from considerable depth. Before the eruption, a ～0.05?km(3) magmatic intrusion grew over a period of three months, in a temporally and spatially complex manner, as revealed by GPS (Global Positioning System) geodetic measurements and interferometric analysis of satellite radar images. The second eruption occurred within the ice-capped caldera of the volcano, with explosivity amplified by magma-ice interaction. Gradual contraction of a source, distinct from the pre-eruptive inflation sources, is evident from geodetic data. Eyjafjallaj?kull's behaviour can be attributed to its off-rift setting with a 'cold' subsurface structure and limited magma at shallow depth, as may be typical for moderately active volcanoes. Clear signs of volcanic unrest signals over years to weeks may indicate reawakening of such volcanoes, whereas immediate short-term eruption precursors may be subtle and difficult to detect.     

Seismic tremors and magma wagging during explosive volcanism

Volcanic tremor is a ubiquitous feature of explosive eruptions. This oscillation persists for minutes to weeks and is characterized by a remarkably narrow band of frequencies from about 0.5?Hz to 7?Hz (refs 1-4). Before major eruptions, tremor can occur in concert with increased gas flux and related ground deformation. Volcanic tremor is thus of particular value for eruption forecasting. Most models for volcanic tremor rely on specific properties of the geometry, structure and constitution of volcanic conduits as well as the gas content of the erupting magma. Because neither the initial structure nor the evolution of the magma-conduit system will be the same from one volcano to the next, it is surprising that tremor characteristics are so consistent among different volcanoes. Indeed, this universality of tremor properties remains a major enigma. Here we employ the contemporary view that silicic magma rises in the conduit as a columnar plug surrounded by a highly vesicular annulus of sheared bubbles. We demonstrate that, for most geologically relevant conditions, the magma column will oscillate or 'wag' against the restoring 'gas-spring' force of the annulus at observed tremor frequencies. In contrast to previous models, the magma-wagging oscillation is relatively insensitive to the conduit structure and geometry, which explains the narrow band of tremor frequencies observed around the world. Moreover, the model predicts that as an eruption proceeds there will be an upward drift in both the maximum frequency and the total signal frequency bandwidth, the nature of which depends on the explosivity of the eruption, as is often observed.     

A satellite geodetic survey of large-scale deformation of volcanic centres in the central Andes

Surface deformation in volcanic areas usually indicates movement of magma or hydrothermal fluids at depth. Stratovolcanoes tend to exhibit a complex relationship between deformation and eruptive behaviour. The characteristically long time spans between such eruptions requires a long time series of observations to determine whether deformation without an eruption is common at a given edifice. Such studies, however, are logistically difficult to carry out in most volcanic arcs, as these tend to be remote regions with large numbers of volcanoes (hundreds to even thousands). Here we present a satellite-based interferometric synthetic aperture radar (InSAR) survey of the remote central Andes volcanic arc, a region formed by subduction of the Nazca oceanic plate beneath continental South America. Spanning the years 1992 to 2000, our survey reveals the background level of activity of about 900 volcanoes, 50 of which have been classified as potentially active. We find four centres of broad (tens of kilometres wide), roughly axisymmetric surface deformation. None of these centres are at volcanoes currently classified as potentially active, although two lie within about 10 km of volcanoes with known activity. Source depths inferred from the patterns of deformation lie between 5 and 17 km. In contrast to the four new sources found, we do not observe any deformation associated with recent eruptions of Lascar, Chile.     

Explosive volcanism may not be an inevitable consequence of magma fragmentation

The fragmentation of magma, containing abundant gas bubbles, is thought to be the defining characteristic of explosive eruptions. When viscous stresses associated with the growth of bubbles and the flow of the ascending magma exceed the strength of the melt, the magma breaks into disconnected fragments suspended within an expanding gas phase. Although repeated effusive and explosive eruptions for individual volcanoes are common, the dynamics governing the transition between explosive and effusive eruptions remain unclear. Magmas for both types of eruptions originate from sources with similar volatile content, yet effusive lavas erupt considerably more degassed than their explosive counterparts. One mechanism for degassing during magma ascent, consistent with observations, is the generation of intermittent permeable fracture networks generated by non-explosive fragmentation near the conduit walls. Here we show that such fragmentation can occur by viscous shear in both effusive and explosive eruptions. Moreover, we suggest that such fragmentation may be important for magma degassing and the inhibition of explosive behaviour. This implies that, contrary to conventional views, explosive volcanism is not an inevitable consequence of magma fragmentation.     

The role of volatiles in magma chamber dynamics

Many andesitic volcanoes exhibit effusive eruption activity, with magma volumes as large as 10(7)-10(9) m(3) erupted at rates of 1-10 m(3) x s(-1) over periods of years or decades. During such eruptions, many complex cycles in eruption rates have been observed, with periods ranging from hours to years. Longer-term trends have also been observed, and are thought to be associated with the continuing recharge of magma from deep in the crust and with waning of overpressure in the magma reservoir. Here we present a model which incorporates effects due to compressibility of gas in magma. We show that the eruption duration and volume of erupted magma may increase by up to two orders of magnitude if the stored internal energy associated with dissolved volatiles can be released into the magma chamber. This mechanism would be favoured in shallow chambers or volatile-rich magmas and the cooling of magma by country rock may enhance this release of energy, leading to substantial increases in eruption rate and duration.     

调质态07MnNiMoDR钢脆性断裂机制及冲击功离散性

测试了调质态07MnNiMoDR钢的冲击功,研究了其在DBTT区间的脆性断裂机制.结果表明,调质态07MnNiMoDR钢在DBTT区间的解理断裂由贝氏体束尺寸控制;存在一个临界尺寸,当形成于贝氏体束内的微裂纹尺寸达到这个临界值,并在正应力作用下穿过贝氏体束界扩展至相邻贝氏体束时,发生脆性解理断裂.另外,在DBTT区间的冲击断裂过程中,粗大贝氏体束的离散分布将使得脆性断裂载荷值不稳定,并最终导致冲击功出现离散.因此,通过控制调质态07MnNiMoDR钢中贝氏体束尺寸并使其均匀分布,能够有效提高其在DBTT区间的冲击功及降低冲击功离散性.     

400 MPa级超级钢的脆性转变温度

以微Nb处理控轧控冷工艺生产的400MPa级超级钢为研究对象,采用"系列冲击实验法"测定系列冲击功,绘制出脆性转变温度曲线·按综合能量法及断口形貌,确定出脆性转变温度为-80℃,并与相同化学成分、普通方法生产的钢板的脆性转变温度加以比较,对这一温度降低的原因进行了分析·分析结果认为,脆性转变温度降低、低温韧性的改善是化学成分、微观组织、轧制工艺综合作用的结果·钢中S、P、Si含量低有利于脆性转变温度的降低、微量Nb的存在有利于脆性转变温度的降低;晶粒细化,亚晶强化是试验钢脆性转变温度降低的组织原因;控轧控冷工艺的采用是降低脆性转变温度的工艺因素·     

Structures, kinematics, thermochronology and tectonic evolution of the Ramba gneiss dome in the northern Himalaya

The Ramba gneiss dome, one of the north Himalayan gneiss domes, is composed of three tectono-lithologic units separated by an upper and a lower detachment fault. Low-grade metamorphic Tethyan Himalayan sedimentary sequence formed the upper unit above the brittle upper detachment fault. Mylonitic gneiss and a leucogranite pluton made up the lower unit beneath the ductile lower detachment fault. Mylonitic middle-grade garnet-, staurolite- and andalusite-schist constituted the middle unit between the two faults, which may be that the basal part of the upper unit experienced detachment shear. The Ramba dome underwent three episodes of deformation in its tectonic evolution. The first episode was a top-down-to-north-northwest sliding possibly related to the activity of the south Tibetan detachment system （STDS）. The second episode was the dominant deformation related to a east west extension, which resulted in a unique top-down-to-east kinematics and the major tectonic features of the dome. The third episode was a collapse sliding toward the outsides of the dome. The Ramba gneiss dome is possibly a result of the east-west extension and magmatic diapir. The lower detachment fault is probably the main detachment fault separating the sedimentary sequence from the crystalline basement during the eas-west extension in the dominant deformation episode. The diapir of the leucogranite pluton formed the doming shape of the Ramba gneiss dome. This pluton intruded in the core of the dome in a late stage of the dominant deformation, and its Ar-Ar cooling ages are about 6 Myr. This indicates that the dominant deformation of the dome happened at the same time of the east west extension represented by the nort-south trending rifts throughout the northern Himalaya and southern Tibet. Therefore, the formation of the Ramba gneiss dome should be related to this east west extension.     

Direct observation of a submarine volcanic eruption from a sea-floor instrument caught in a lava flow

Our understanding of submarine volcanic eruptions has improved substantially in the past decade owing to the recent ability to remotely detect such events and to then respond rapidly with synoptic surveys and sampling at the eruption site. But these data are necessarily limited to observations after the event. In contrast, the 1998 eruption of Axial volcano on the Juan de Fuca ridge was monitored by in situ sea-floor instruments. One of these instruments, which measured bottom pressure as a proxy for vertical deformation of the sea floor, was overrun and entrapped by the 1998 lava flow. The instrument survived-being insulated from the molten lava by the solidified crust-and was later recovered. The data serendipitously recorded by this instrument reveal the duration, character and effusion rate of a sheet flow eruption on a mid-ocean ridge, and document over three metres of lava-flow inflation and subsequent drain-back. After the brief two-hour eruption, the instrument also measured gradual subsidence of 1.4 metres over the next several days, reflecting deflation of the entire volcano summit as magma moved into the adjacent rift zone. These findings are consistent with our understanding of submarine lava effusion, as previously inferred from seafloor observations, terrestrial analogues, and laboratory simulations.     

Structure instability forecasting and analysis of giant rock pillars in steeply dipping thick coal seams

Structure stability analysis of rock masses is essential for forecasting catastrophic structure failure in coal seam mining. Steeply dipping thick coal seams (SDTCS) are common in the Urumqi coalfield, and some dynamical hazards such as roof collapse and min-ing-induced seismicity occur frequently in the coal mines. The cause of these events is mainly structure instability in giant rock pillars sand-wiched between SDTCS. Developing methods to predict these events is important for safe mining in such a complex environment. This study focuses on understanding the structural mechanics model of a giant rock pillar and presents a viewpoint of the stability of a trend sphenoid fractured beam (TSFB). Some stability index parameters such as failure surface dips were measured, and most dips were observed to be between 46° and 51°. We used a digital panoramic borehole monitoring system to measure the TSFB’s height (ΔH), which varied from 56.37 to 60.50 m. Next, FLAC3D was used to model the distribution and evolution of vertical displacement in the giant rock pillars;the re-sults confirmed the existence of a TSFB structure. Finally, we investigated the acoustic emission (AE) energy accumulation rate and ob-served that the rate commonly ranged from 20 to 40 kJ/min. The AE energy accumulation rate could be used to anticipate impeding seismic events related to structure failure. The results presented provide a useful approach for forecasting catastrophic events related to structure in-stability and for developing hazard prevention technology for mining in SDTCS.     

Evidence from the AD 2000 Izu islands earthquake swarm that stressing rate governs seismicity

Magma intrusions and eruptions commonly produce abrupt changes in seismicity far from magma conduits that cannot be associated with the diffusion of pore fluids or heat. Such 'swarm' seismicity also migrates with time, and often exhibits a 'dog-bone'-shaped distribution. The largest earthquakes in swarms produce aftershocks that obey an Omori-type (exponential) temporal decay, but the duration of the aftershock sequences is drastically reduced, relative to normal earthquake activity. Here we use one of the most energetic swarms ever recorded to study the dependence of these properties on the stress imparted by a magma intrusion. A 1,000-fold increase in seismicity rate and a 1,000-fold decrease in aftershock duration occurred during the two-month-long dyke intrusion. We find that the seismicity rate is proportional to the calculated stressing rate, and that the duration of aftershock sequences is inversely proportional to the stressing rate. This behaviour is in accord with a laboratory-based rate/state constitutive law, suggesting an explanation for the occurrence of earthquake swarms. Any sustained increase in stressing rate--whether due to an intrusion, extrusion or creep event--should produce such seismological behaviour.     

东秦岭松树沟蛇绿橄榄岩结构构造及其组构特征

东秦岭松树沟蛇绿岩的橄榄岩结构构造及组构研究表明，该蛇绿橄榄岩主要经历了３期塑性变形的叠加改造，分别为洋盆扩张阶段以动态重结晶作用为主要特征的塑性变形、蛇绿橄榄岩块底辟侵位于上覆玄武岩过程中的高温塑性变形和蛇绿岩构造侵位过程中的低温塑性变形，反映了其特征的构造演化过程。     

The use of earthquake rate changes as a stress meter at Kilauea volcano

Stress changes in the Earth's crust are generally estimated from model calculations that use near-surface deformation as an observational constraint. But the widespread correlation of changes of earthquake activity with stress has led to suggestions that stress changes might be calculated from earthquake occurrence rates obtained from seismicity catalogues. Although this possibility has considerable appeal, because seismicity data are routinely collected and have good spatial and temporal resolution, the method has not yet proven successful, owing to the non-linearity of earthquake rate changes with respect to both stress and time. Here, however, we present two methods for inverting earthquake rate data to infer stress changes, using a formulation for the stress- and time-dependence of earthquake rates. Application of these methods at Kilauea volcano, in Hawaii, yields good agreement with independent estimates, indicating that earthquake rates can provide a practical remote-sensing stress meter.     

The effect of energy feedbacks on continental strength

The classical strength profile of continents is derived from a quasi-static view of their rheological response to stress--one that does not consider dynamic interactions between brittle and ductile layers. Such interactions result in complexities of failure in the brittle-ductile transition and the need to couple energy to understand strain localization. Here we investigate continental deformation by solving the fully coupled energy, momentum and continuum equations. We show that this approach produces unexpected feedback processes, leading to a significantly weaker dynamic strength evolution. In our model, stress localization focused on the brittle-ductile transition leads to the spontaneous development of mid-crustal detachment faults immediately above the strongest crustal layer. We also find that an additional decoupling layer forms between the lower crust and mantle. Our results explain the development of decoupling layers that are observed to accommodate hundreds of kilometres of horizontal motions during continental deformation.     

高应力下脆性岩石卸荷力学特性及数值模拟

高地应力下脆性岩体工程开挖变形机理、稳定性评价及灾害控制技术研究一直是岩石力学和工程地质研究的难点问题。基于高应力下脆性岩石卸荷力学试验分析,明确了卸荷过程中的岩石力学参数及变形破坏演化规律,发现高应力下脆性岩石的破坏具有较明显的应变强度特征。分析了高应力下脆性岩石卸荷破坏采用张拉屈服的Griffith应变强度准则的合理性,建立了考虑卸荷屈服引起岩体力学参数变化的弹脆塑性数值计算方法,并在实际工程中得以验证。     

Significant decadal-scale impact of volcanic eruptions on sea level and ocean heat content

Ocean thermal expansion contributes significantly to sea-level variability and rise. However, observed decadal variability in ocean heat content and sea level has not been reproduced well in climate models. Aerosols injected into the stratosphere during volcanic eruptions scatter incoming solar radiation, and cause a rapid cooling of the atmosphere and a reduction in rainfall, as well as other changes in the climate system. Here we use observations of ocean heat content and a set of climate simulations to show that large volcanic eruptions result in rapid reductions in ocean heat content and global mean sea level. For the Mt Pinatubo eruption, we estimate a reduction in ocean heat content of about 3 x 10(22) J and a global sea-level fall of about 5 mm. Over the three years following such an eruption, we estimate a decrease in evaporation of up to 0.1 mm d(-1), comparable to observed changes in mean land precipitation. The recovery of sea level following the Mt Pinatubo eruption in 1991 explains about half of the difference between the long-term rate of sea-level rise of 1.8 mm yr(-1) (for 1950-2000), and the higher rate estimated for the more recent period where satellite altimeter data are available (1993-2000).     

The role of dyking and fault control in the rapid onset of eruption at Chaitén volcano, Chile

Rhyolite is the most viscous of liquid magmas, so it was surprising that on 2?May 2008 at Chaitén Volcano, located in Chile's southern Andean volcanic zone, rhyolitic magma migrated from more than 5?km depth in less than 4?hours (ref.?1) and erupted explosively with only two days of detected precursory seismic activity. The last major rhyolite eruption before that at Chaitén was the largest volcanic eruption in the twentieth century, at Novarupta volcano, Alaska, in 1912. Because of the historically rare and explosive nature of rhyolite eruptions and because of the surprisingly short warning before the eruption of the Chaitén volcano, any information about the workings of the magmatic system at Chaitén, and rhyolitic systems in general, is important from both the scientific and hazard perspectives. Here we present surface deformation data related to the Chaitén eruption based on radar interferometry observations from the Japan Aerospace Exploration Agency (JAXA) DAICHI (ALOS) satellite. The data on this explosive rhyolite eruption indicate that the rapid ascent of rhyolite occurred through dyking and that melt segregation and magma storage were controlled by existing faults.     

氢对步冷前后2（1／4）Cr—1Mo压力容器钢韧脆转变行为的影响

研究了2(1/4)Cr-1Mo压力容器钢步冷前后氢对韧脆转变的影响及冲击载荷下氢脆与回火脆的关系.结果发现:氢使回火脆化前后韧脆转变温度升高,氢的作用大小与回火脆倾向有关,最后提出韧脆转变模型,对两脆化的作用进行了分析.