Application of Nanometer-Size Titanium Dioxide in Extreme-Trace V（Ⅴ） Analysis

0Introduction Vanadiumplaysanimportantroleinmodernindustry,es peciallyinsteelandchemicalindustry.Forinstance,itscompoundsarewidelyappliedintheproceduresofvitrioland petroleumchemicalmanufactureascatalyzers[14].Vanadium hasseveralvalences,butgenerallyitslowvalencesturnintohighoneseasilyinenvironment[5].BecauseV(Ⅴ)isthemost stableandpoisonousone,weoftenlayemphasisonitinenvi ronmentalpollutioncontrol.Vanadiumexistsinenvironmentalwaterwithextremelylowconcentration.Inseawateritscontentislessthan…     

Research on C<Subscript>3</Subscript>N<Subscript>4</Subscript> superhard compound thin film and its application

By combination of DC reactive magnetron sputtering with multiple arcplating, the alternating C₃N₄/TiN compound film is deposited onto HSS. The core level binding energy and the contents of carbon and nitrogen are characterized by X-ray photoelectron spectrum. X-ray diffraction (XRD) shows that compound thin film contains hard crystalline phases of α-C₃N₄ and β-C₃N₄. The Knoop microhardness in the load range of 50, 5–54, 1 GPa is measured. According to acoustic emission scratch test, the critical load values for the coatings on HSS substrates are in the range of 40–80 N. The metal coated with C₃N₄/TiN compound films has a great improvement in the resistance against corrosion. Many tests show that such a coating has a very high wearability. Compared with the uncoated and TiN coated tools, the C₃N₄/TiN coated tools have a much longer cutting life. Foundation item: Supported by the National Natural Science Foundation of China (19875037) Biography: Wu Da-we( (1941-), male, Professor, research direction; thin film and its application.     

Synthesis, Characterization and Calorimetry of Ni（C4H8N2O3）2Cl2

A coordination complex was synthesized from NiCl2 and dipeptide glycylglycine（GG）. It was characterized by element analysis, NMR and TG methods, and then was determined to be Ni（C4HsN2O3）2Cl2. Using an isoperibolic reaction calorimeter, the standard molar enthalpy of formation of Ni（GG）2Cl2（solid） has been determined to be -（1 674.66±2.02） kJ · mol^-1 at 298.15 K.     

Synthesis and structure of Cu5(BTA)6(TTA)4 · 5DMF, a copper-nitrogen cluster containing η Π3-benzotriazolate

The title cluster compound—Cu₅(BTA)₆(TTA)₄·5DMF was prepared using thenyltrifluoroacetone and benzotriazolate ligands. The crystal structure indicates that a tetrahedral array of Cu(1), Cu(2), Cu(3) and Cu(4) ions surrounding a central Cu(5) ion are held together by bridging tridentate BTA^- and terminated by TTA^- bond cap. The three nitrogen atoms of a BTA^- bond three different copper ions to form a η³-benzotriazolate. The central Cu ion has a distorted octahedral structure and the surrounding Cu ions are 5 coordinated forming distorted tetragonal structures. The distances between the surrounding Cu(Ⅱ) ions and the central Cu(Ⅱ) ion are in the range of 0.3561—0.3755 nm and those between the surrounding Cu(Ⅱ) ions are in the range of 0.5785—0.6301 nm.     

Theoretical study on the lithium bond interaction of furan homologues C4H4Y （Y=O,S） with LiCH3 via DFT and MP2

The optimizations geometries and interaction energy corrected by BSSE of the complexes between C4H4Y （Y=O, S） and CHiLi have been calculated at the B3LYP/6-311＋＋G^＊＊ and MP2/6-311＋＋G^＊＊ levels. Three complexes were obtained. Abnormally, the calculations showed that all the C10--Li14 bond lengths increased obviously but the blue-shift of C10-Li14 stretching frequency occurred after formed complexes. The calculated binding energy with basis set super-position error （BSSE） and zero-point vibrational energy corrections of complexes I-III is -45.757, -35.700 and -39.107 kJ·mol^-1, respectively. The analyses on the combining interaction with the atom-in-molecules theory （AIM） also showed that a relatively strong lithium bond interaction presented in furan homologues C4H4Y-LiCH3 systems. Natural bond orbital theory （NBO） analysis has been performed, and the results revealed that the complex I is formed with n-σ type lithium bond interaction between C4H40 and LiCH3, complex II is formed with TT-s type lithium bond interaction between C4H4O and LiCH3, and complex III is formed with TT-s and n-s type lithium bond interactions between C4H4S and LiCH3, respectively.     

Electrochemical properties of LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.3</Subscript>Ti<Subscript>0.2</Subscript>O<Subscript>4</Subscript>/Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> cells

Spinel compounds LiNi_0.5Mn_1.3Ti_0.2O₄ (LNMTO) and Li₄Ti₅O₁₂ (LTO) were synthesized by different methods. The particle sizes of LNMTO and LTO are 0.5–2 and 0.5–0.8 μm, respectively. The LNMTO/LTO cell exhibits better electrochemical properties at both a low current rate of 0.2C and a high current rate of 1C. When the specific capacity was determined based on the mass of the LNMTO cathode, the LNMTO/LTO cell delivered 137 mA·h·g⁻¹ at 0.2C and 118.2 mA·h·g⁻¹ at 1C, and the corresponding capacity retentions after 30 cycles are 88.5% and 92.4%, respectively.     

Effects of Yb^3＋ codoping on visible and near infrared emissions of Er^3＋-Yb^3＋ codoped Al2O3 powders by the sol-gel method

The 0.1 mol% Er^3＋ and 0-2 mol% Yb^3＋ codoped Al2O3 powders were prepared by the sol-gel method, and the phase structure, including only two crystalline types of doped Al2O3 phase, γ-（Al,Er, Yb）2O3 and θ-（Al,Er, Yb）2O3, was detected at the sintering temperature of 1000℃. The visible and near infrared emissions properties depended strongly on the Yb^3＋ codoping, and the corresponding maximal peak intensities centered at about 523, 545, 660 and 1533 nm were obtained respectively for the 0.1 mol% Er^3＋ and 0.5 mol% Yb^3＋ codoped Al2O3 powders, which were composed of θ-（Al,Er,Yb）2O3 and a small amount of γ-（Al,Er, Yb）2O3 phases. The two-photon absorption process was responsible for the visible up-conversion emissions, and the one-photon absorption process was involved in the near infrared emissions of the Er^3＋-yb^3＋ codoped Al2O3 powders.     

Silicon field emission arrays coated with CN<Subscript>x</Subscript> thin films

Arrays of silicon micro-tips were made by etching the p-type (1 0 0) silicon wafers which had SiO₂ masks with alkaline solution. The density of the micro-tips is 2×10⁴ cm⁻². The Scanning Electron Microscope (SEM) photos showed that the tips in these arrays are uniform and orderly. The CN_x thin film, with the thickness of 1.27 μm was deposited on the silicon micro-tip arrays by using the middle frequency magnetron sputtering technology. The SEM photos showed that the films on the tips are smoothly without particles. Keeping the sharpness of the tips will benefit the properties of field emission. The X-ray photoelectron spectrum (XPS) showed that carbon, nitrogen and oxygen are the three major elements in the surfaces of the films. The percents of them are C: 69.5%, N: 12.6% and O: 17.9%. The silicon arrays coated with CN_x thin films had shown a good field emission characterization. The emission current intensity reached 3.2 mA/cm² at 32.8 V/μm, so it can be put into use. The result showed that the silicon arrays coated with CN_x thin films are likely to be good field emission cathode. The preparation and the characterization of the samples were discussed in detail. Foundation item: Supported by the National Natural Science Foundation of China (19975035) Biography: Chen Ming an (1978-), male, Ph. D candidate, research direction: novel functional materials film and ion beam modification of materials.     

Investigation of the cross-reaction mechanism of C<Subscript>6</Subscript>H<Subscript>5</Subscript>F-HNO<Subscript>2</Subscript> aqueous solution irradiated at 355 nm by transient absorbance spectrum technique

The transient absorption spectrum technique was employed to investigate the cross-reaction mechanism of C6H5F-HNO2 aqueous solution irradiated at 355 nm. The characteristic and the kinetic parameters of transient species were also detected. Hydroxyl radical derived from the photolysis of HNO2 was added to monofluorobenzene with a second-order rate constant of （5.83±0.17）×10^9 L·mol^-1·s^-1 to form an adduct, C6H5F…OH, which was able to react with HNO2 as the main reaction pathway with a rate constant of （8.3±0.1）×10^7 L·mol^-1·s^-1. The C6F6…OH adduct can also be decayed by elimination of H2O to yield monofluorophenyl radical C6H4F-. By GC-MS technique, the final products were identified to be monofluorophenol, nitro-monofluorobenzene, nitro-monofluorophenol and para-fluorobiphenyl.     

Kinetic studies of the decomposition reaction of adducts of dinuclear Fe(Ⅱ)/O2

Kinetic studies of the decomposition reaction of dinuclear Fe(Ⅱ) adducts [Fe₂(N-Et-HPTB){O₂P(OPh)₂}](Cl- O₄)₂ (1) and [Fe₂(N-Et-HPTB) {O₂P(Ph)₂}] (ClO₄)₂ (2) with O₂ have been carried out at low temperature using UV-vis spectra. The decomposition reaction of Fe(Ⅱ)/O₂ adducts was first-order in the experimental conditions, and the activation parameters were obtained. ?H^¹ = 85.62 kJ·mol^-1, ?S¹ = 19.43 J·mol^-1·K^-1 for compound (1) and ?H^¹ = 97.97 kJ·mol^-1, ?S^¹ = 55.68 J·mol^-1·K^-1 for compound (2). These results are similar to those of dioxygen adducts of other metals complexes and natural enzymes such as methane mono- oxygenase (MMOH).     

Thermoluminescence characteristics of Li2B4O7：Cu,As,P

This paper reports the thermoluminescence （TL） characteristics of lithium borate activated by Cu, Ag and P. The glow curves and spectra of thermoluminescence were measured, and the thermoluminescence response as a function of the absorbed dose and the fading behavior were studied. The results indicate that TL of this material has a low fading and wide linear dose response （10^-4-10^3 Gy）.     

Electrocatalytic oxidation of H<Subscript>2</Subscript>O<Subscript>2</Subscript> at a carbon paste electrode modified with a nickel (II)-5, 11, 17, 23-tetra-tert-butyl-25, 27-bis(Diethylcarbamoylmethoxy) calix[4] arene complex and its application

Electrochemical behavior of a carbon paste electrode (CPE) modified with nickel(II)-5, 11, 17, 23-tetra-tert-butyl-25, 27-bis(diethylcarbamoylmethoxy) calix[4]arene (Ni (II)-L) complex and its electrocatalytic activity towards the oxidation of hydrogen peroxide were investigated by cyclic voltammetric technique in a 5.0×10⁻² mol/L NaClO₄+1.0×10⁻³ mol/L NaOH solution. It was found that Ni(II)-L acts as an effective catalyst for the oxidation of hydrogen peroxide. The modified electrode exhibited a linear response over a hydrogen peroxide concentrations in the range of 2.0×10⁻⁵−1.0×10⁻⁴ mol/L with a detection limit as low as 1.0×10⁻⁶ mol/L. The relative standard deviation was 3.5% for 5 successive determinations of H₂O₂ at 1.0×10⁻⁵ mol/L. The modified electrode was used successfully in rainwater analysis. Foundation item: Supported by the Natural Science Foundation of Hubei Province (98J040). Biography: Li Chun ya(1972-), Ph. D. candidate, research direction: electroanalysis and electrosynthesis.     

Synthesis and characterization of wormhole-like mesoporous Ce0.6Zr0.35Y0.05O2 solid solutions

Nanoparticles of Ce0.6Zr0.35Y0.05O2 (CZY) solid solution have been prepared by the CTAB (hexadecyl-trimethyl ammonium bromide), CTAB-EG (ethylene glycol) templating, and CTAB-EG-NaCl (in which the pores of the precursor synthesized by the CTAB-EG method is filled by a certain amount of NaCl) method, respectively. The physical properties of these materials were characterized by means of tech-niques such as X-ray diffraction (XRD), high resolution scanning electron microscopy (HRSEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and N2 adsorp-tion-desorption measurements. The CZY samples synthesized by the above three methods display wormhole-like mesoporous morphology and cubic crystal structures. The materials are narrow in pore size distribution (averaged pore diameter = 5.3―7.1 nm), high in surface areas (95―119 m2/g), and large in pore volumes (0.16―0.18 cm3/g). It has been demonstrated that the introduction of NaCl is capable of retaining the pore structures of solid nanomaterials at high-temperature calcination.     

Flow-injection microcolumn on-line preconcentration for the determination of chromium (VI)

A rapid and sensitive on-line preconcentration method for spectrophotometric determination of chromium (VI) in nature water is described. Preconcentration and determination are based on (i) the quantitative and fast adsorption of chromium (VI) on the high surface area nanometer-size TiO₂ (anatase) powders, which prepared by a sol-gel method from hydrolysis of TiCl₄ and (ii) the quantitative and reproducible elution of Cr (VI) by 2.0 mol·L⁻¹ HCl. A mini-column system for preconcentration is developed, Cr(VI) on the mini-column is eluted and merged with a stream water and DPCB (1,5-diphenylcarbazide) as the chromogenic reagent. The proposed system permits throughputs of 6 sample h⁻¹ (0.001 μg·mL⁻¹ Cr(VI)) or 20 sample h⁻¹ (0.1 μg·mL⁻¹ Cr(VI)). The preconcentration factor is 55. The detection limit is 0.8 ng · mL⁻¹ Cr(VI). The reproducibility is satisfactory with a relative standard deviation of less than 3.35% (0.01 μg·mL⁻¹ Cr(VI),n=5). Supported by the National Natural Science Foundation of China Ma Wanhong: born in 1961, Ph. D. Graduate student, Associate professor     

Preparation and upconversion luminescence of YVO<Subscript>4</Subscript>:Er<Subscript>3+</Subscript>, Yb<Subscript>3+</Subscript>

YVO₄:Er³⁺, Yb³⁺ with varying Yb³⁺ concentrations were prepared by a precipitation method. The results of X-ray diffraction (XRD) show that all the samples have a tetragonal zircon structure; the calculated average crystallite sizes are in the range of 14–22 nm. The lattice constants and cell volume of the samples decrease slightly with the increase in Yb³⁺ concentration. The upconversion luminescence spectra of all the samples were studied under 980 nm laser excitation. The strong green emission is observed, which is attributed to the ²H_11/2 → ⁴I_15/2 and ⁴S_3/2→⁴I_15/2 transitions of Er³⁺, and the red emission peaks in 650–675 nm can be ignored. The emission intensity for the sample depends on the Yb³⁺ concentration. These results reveal that the upconversion processes of YVO₄:Er³⁺, Yb³⁺ are related to the structure and the doping Yb³⁺ concentration of the sample.     

Surface tension and specific heat of liquid Ni<Subscript>70.2</Subscript>Si<Subscript>29.8</Subscript> alloy

The thermophysical properties of liquid alloys in me-tastable state are of importance for liquid-solid phase transformation under nonequilibrium conditions[1―10]. Sur-face tension and specific heat, two of the most important thermophysical properties, have significant influences on the process of crystal nucleation and growth. Furthermore, it is necessary to obtain these data so as to perform quan-titative research on rapid solidification[3―10]. The tradi-tional measurement methods, however,…     

Photoluminescence and cathodoluminescence properties of CaLaGa<Subscript>3</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>3+</Superscript> phosphors

The CaLaGa₃O₇:Eu³⁺ phosphor was prepared by a chemical co-precipitation method. Field emission scanning electron microscopy (FE-SEM), laser particle size analysis, X-ray diffraction (XRD), photoluminescence (PL), and cathodoluminescence (CL) spectra were utilized to characterize the synthesized phosphor. The results revealed that the phosphor was composed of microspheres with a slight agglomerate phenomenon and was spherically shaped. The average grain size was about 1.0 μm. Eu³⁺ ions, as luminescent centers, substituted La³⁺ ions into the single crystal lattice of CaLaGa₃O₇ with the sites of C_s. Although the CL spectrum was greatly different from the PL spectrum, it had the strongest red emission corresponding to the ⁵D₀ →⁷F₂ transition of Eu³⁺. Under the excitation of UV light (287 nm) and electron beams (1.0–7.0 kV), the chromaticity coordinates of the phosphor were found to be in the nearly red and orange light regions, respectively.     

Investigation of Ru （ phen ）3^2＋-Hydrazine-Ce（Ⅳ） Chemiluminescence System and Its Analytical Application

0 IntroductionThbiep ycroidmipnlee)xru ctahteinoinu mof(Ⅱ r)u t(he Rniuu(mbip,y m)3ai2n +ly) atrnids- t(r2is -,(21’ -,10-phenanthroline)ruthenium(Ⅱ) (Ru(phen)32 +) ,is a kindof sensitive analytical reagent for electrogenerated chemilumi-nescence(ECL) and chemiluminescence(CL) ,on which a par-ticular review has been presented[1]. The earliest publicationon the synthesis of Ru(bipy)32 +appeared in 1936[2], andduringthefollowing30 years ,theinvestigations relatedtothissubstance were only in…     

Effect of CO<Subscript>2</Subscript> concentrations on the activity of photosynthetic CO<Subscript>2</Subscript> fixation and extracelluar carbonic anhydrase in the marine diatom <Emphasis Type="Italic">Skeletonema costatum</Emphasis>

The growth and activity of photosynthetic CO2 uptake and extracellular carbonic anhydrase (CAext) of the marine diatom Skeletonema costatum were investigated while cultured at different levels of CO2 in order to see its physio-logical response to different CO2 concentrations under either a low (30 靘ol·m-2·s-1) or high (210 靘ol·m-2·s-1) irradiance. The changes in CO2 concentrations (4—31 靘ol/L) affected the growth and net photosynthesis to a greater extent under the low than under the high light re-gime. CAext was detected in the cells grown at 4 mol/L CO2 but not at 31 and 12 靘ol/L CO2, with its activity being about 2.5-fold higher at the high than at the low irradiance. Photo- synthetic CO2 affinity (1/ K1/2(CO2)) of the cells de-creased with increased CO2 concentrations in culture. The cells cultured under the high-light show significantly higher photosynthetic CO2 affinity than those grown at the low-light level. It is concluded that the regulations of CAext activity and photosynthetic CO2 affinity are dependent not only on CO2 concentration but also on light availability, and that the de-velopment of higher CAext activity and CO2 affinity under higher light level could sufficiently support the photosyn-thetic demand for CO2 even at low level of CO2.     

TiO<Subscript>2</Subscript>@MgO core-shell film: Fabrication and application to dye-sensitized solar cells

In this study,TiO2@MgO core-shell film was obtained by using a simple chemical bath deposition method to coat a thin MgO film around TiO2 nanoparticles. The core-shell configuration was characterized by X-ray diffractometer (XRD),scanning elec-tron microscopy (SEM),energy dispersive X-ray spectroscopy (EDX),and high-resolution transmission electron microscopy (HRTEM). Lattice fringes were observed for the TiO2 particles,and the MgO shell showed an amorphous structure,revealing a clear distinction between the core and shell materials. Applying the core-shell film as photoanode to the dye-sensitized solar cells (DSSCs),it shows a superior performance compared to the pure TiO2 electrode. Under the illumination of simulated sunlight (75 mW-cm-2),the short circuit photocurrent (Jsc),the open circuit photovoltage (Voc),and the fill factor (fF) are 8.80 mA-cm-2,646 mV,and 0.69,respectively,and the conversion efficiency (η) in-creased by 21.8% (from 4.32% to 5.26%) when dipping for opti-mum condition.