是前置定语还是原因状语?——对高中英语《教师教学用书》注释的一点异议

本文阐述了形容词用作状语的观点，指出《教师教学用书》中对“Strong，proud and united，the people of St Petersburg are the modern heroes of Russia．”的解释是错误的，并列举了大量的例子作为佐证，认为“Strong，proud and united，”应理解为原因状语，这样才能有助于学生的理解，有助于对英语语法的学习，避免在语法学习上走弯路。     

Interaction of fatigue and creep of GH33 under multi-axial stress at high temperature

Low-cycle fatigue experiments of tension-compression, torsion and tension-torsion with holding time were performed.The interaction law of creep and fatigue under multiaxial stress at high temperature was investigated, and the micro-mechanism of equilibrium diagrams was analyzed. A united equation of fatigue life under multiaxial stress was proposed.     

Product model structure for generalized optimal design

The framework of the generalized optimization product model with the core of network- and tree-hierarchical structure is advanced to improve the characteristics of the generalized optimal design. Based on the proposed node-repetition technique, a network-hierarchical structure is united with the tree-hierarchical structure to facilitate the modeling of serialization and combination products. The criteria for product decomposition are investigated. Seven tree nodes are defined for the construction of a general product model, and their modeling properties are studied in detail. The developed product modeling system is applied and examined successfully in the modeling practice of the generalized optimal design for a hydraulic excavator.     

Self-assembly low dimensional inorganic/organic heterojunction nanomaterials

One dimensional inorganic/organic heterojunction nanomaterials have gained extensive attention in materials science because of their outstanding optical and electrical properties. Strong interactions between the inorganic and organic units can lead to novel or improved physical or chemical performance relative to that of the individual components, realizing synergistic ("1+1>2") performance. It is of great scientific significance for the development of basic scientific research: Understanding and interpretation the law of molecular self-assemble, controlling the self-assemble of low dimensional molecular aggregation with high ordered degree in large area through tailoring the molecular structure and the interaction forces, understanding the synergy drive mechanism produced by the weak interactions between the molecular aggregations then optimizing the original function through the hybrid/ heterojunction self-assemble. In this paper, we discuss the synthetic methods for preparing heterojunctions incorporating diverse components and their potential applications in the fields of electronics and optics.     

Petrological implication of wagnerite-Ma5bc in the quartzofeldspathic gneiss, Larsemann Hills, East Antarctica

Wagnerite-Ma5bc polytype is found in a gneiss associated with cordierite-prismatine-bearing gneiss, northern Stornes Peninsula, Larsemann Hills, East Antarctica. Wagnerite coexists with apatite and both of them are present as rock-forming minerals. Ca depletion is not essential to the formation of wagnerite; sufficient Mg, P and F components, and a relatively low CaMg ratio is critical, otherwise only apatite crystallizes. Strong anatexis of the quartzofeldspathic gneiss of the area results in differentiation and separate enrichment of leuco- and melanocratic components. P and F tend to accumulate in the mafic-rich melanocratic component, and when their abundance reaches certain concentration, wagnerite forms. It is perhaps the chemistry of the setting that controls the appearance of wagnerite, whereas the PT condition is responsible for the variety of wagnerite polytype. A disordered polytype crystallizes at relatively high temperature, then cools down slowly and transforms into one of the ordered polytypes, in this case, the Ma5bc polytype.     

Suppression intra-channel four-wave mixing by strong dispersion management in 160 Gb/s OTDM RZ 100 km transmission

The effect of intra-channel four-wave mixing on the performance of a 160 Gb/s OTDM RZ 100 km transmission system is analyzed. Strong dispersion management to suppress the detrimental effects of intra-channel four-wave mixing is presented theoretically and verified experimentally. Results demonstrate that amplitude fluctuation and ghost pulses are well suppressed by strong dispersion management. Stable (>2 h) error-free (10-12 ) transmission over 100 km is achieved without forward-error correction, and the power penalty is ～3.6 dB.     

"全路客票发售和预订系统"中"离线售票"子系统的设计及实现

This paper introduces the structure，modular design，feasibility and necessity of the“Off-line Selling Ticket” system which is the subsystem of the “China Railway Ticketing and Reservation System”. In addition, the characteristics of the Client/Server structure are described.     

Elements inter-diffusion in the turning of wear-resistance aluminum bronze

Inter-diffusion of elements between the tool and the workpiece during the turning of aluminum bronze using high-speed steel and cemented carbide tools have been studied. The tool wear samples were prepared by using M2 high-speed steel and YW1 cemented carbide tools to turn a novel high strength, wear-resistance aluminum bronze without coolant and lubricant. Adhesion of workpiece materials was found on all tools' surface. The diffusion couples made of tool materials and aluminum bronze were prepared to simulate the inter-diffusion during the machining. The results obtained from tool wear samples were compared with those obtained from diffusion couples. Strong inter-diffusion between the tool materials and the aluminum bronze was observed in all samples. It is concluded that diffusion plays a significant role in the tool wear mechanism.     

浅析Jasmine的庶民身份

BharatiMukherjee曾获国家图书奖，Jasmine是她的巅峰之作。尽管批评家Banerjee批判了Jasmine的非历史性（ahistoricity），说“Mukherjee＇ s failure to contextualize the historical and political events of India aris- es from her inability to perceive the complex workings of postcolonial and neocolonial forees”．但是我们还是可以从小说中找到重要的历史和政治事件对女主人公造成的影响。而这些都对女主人公的庶民身份的理解有重要作用。一、杰西敏的庶民身份如果我们要理解杰西敏的庶民身份，我们就需要首先来了解“庶民”这一术语的含义。     

Flotation mechanisms of molybdenite fines by neutral oils

The flotation mechanisms of molybdenite fines by neutral oils were investigated through microflotation test,turbidity measurements,infrared spectroscopy,and interfacial interaction calculations.The results of the flotation test show that at pH 2-11,the floatability of molybdenite fines in the presence of transformer oil is markedly better than that in the presence of kerosene and diesel oil.The addition of transformer oil,which enhances the floatability of molybdenite fines,promotes the aggregation of molybdenite particles.Fourier transform infrared measurements illustrate that physical interaction dominates the adsorption mechanism of neutral oil on molybdenite.Interfacial interaction calculations indicate that hydrophobic attraction is the crucial force that acts among the oil collector,water,and molybdenite.Strong hydrophobic attraction between the oily collector and water provides the strong dispersion capability of the collector in water.Furthermore, the dispersion capability of the collector,not the interaction strength between the oily collectors and molybdenite,has a highly significant role in the flotation system of molybdenite fines.Our findings provide insights into the mechanism of molybdenite flotation.     

Eclogites in the interior of the Tibetan Plateau and their geodynamic implications

Eclogites have been recently reported in the interior of the Tibetan Plateau, including in the central Qiangtang metamorphic belt, in the Basu metamorphic massif of the eastern Bangong-Nujiang suture zone, and at Songdo and Pengco in the eastern Lhasa terrane. Some typical ultrahigh-pressure （UHP） metamorphic phenomena, e.g., garnet exsolution from clinopyroxene, were documented in the Basu and Pengco eclogites. The UHP metamorphism in the interior of the Tibetan Plateau marked by these eclogites generally took place in the Early Mesozoic. Along with exhumation of these eclogites, （post-） collision-related magmatism extensively occurred around the central Qiangtang belt, the eastern Bangong-Nujiang suture zone, and the eastern Lhasa terrane. The occurrence of these Early Mesozoic eclogites manifests an out-of-sequence evolution of the Tethys, and they could be a product of diachronous collision between the eastern Qiangtang terrane and the irregular continental margin of the united western Qiangtang-Lhasa plate, along the linked eastern Bangong-Nujiang-central Qiangtang zone. The collision-related magmatic rocks could have been originated from lithospheric thickening, melting, or detachment due to the collision. The presence of UHP metamorphic rocks in central Qiangtang and Basu implies likely continental deep-subduction, and the denudation of these two metamorphic zones could have served as the source of the Triassic turbidites in the Songpan-Garze complex and the Jurassic turbidites in the western Bangong-Nujiang zone, respectively. However, studies of the eclogites in the interior of the Tibetan Plateau just began, and many principal aspects still remain to be explored, such as their distributions, typical lithologies and minerals, temperature-pressure conditions, timing of formation and exhumation, protoliths and tectonic setting, and relationship with the evolution of the Tethys and large-scale basins in Tibet.     

Observations of thermospheric vector wind over Yellow River Station during auroral substorm events

Strong disturbances associated with auroral substorms originate from the ionosphere-magnetosphere owing to the effects of the solar wind, and the wind field in the ionosphere is related to such substorm activity. Here, we describe the analysis of four auroral substorm events, for which we employed an all-sky Fabry-Perot interferometer to observe the two-dimensional horizontal wind field and combined the results with data from an all-sky charge-coupled device imager, a fluxgate magnetometer installed at Yellow River Station, and the Super Dual Auroral Radar Network. The results demonstrate that, during auroral substorms, the vector wind field is related closely to variations in the ion drift and geomagnetic field. Moreover, we observed a changing wind field of approximately 300 rn/s in response to variations in the electric and magnetic fields （likely caused by ion drag） and a disturbance of about 200 m/s that we attribute to the interaction of Joule heating and ion drag.     

Experimental study on the in-plane thermal conductivity of Au nanofilms

The in-plane thermal conductivity of Au nanofilms with thickness of 23 nm, which are fabricated by the electron beam-physical vapor deposition method and a suspension technology, is experimentally measured at 80-300 K by a one-dimensional steady-state electrical heating method. Strong size effects are found on the measured nanofilm thermal conductivity. The Au nanofilm in-plane thermal conductivity is much less than that of the bulk material. With the increasing temperature, the nanofilm thermal conductivity increases. This is opposite to the temperature dependence of the bulk property. The Lorenz number of the Au nanofilms is about three times larger than the bulk value and decreases with the increasing temperature, which indicates the invalidity of the Wiedemann-Franz law for metallic nanofilms.     

Vertically aligned ZnO nanorods on porous silicon substrates: Effect of growth time

Vertically aligned ZnO nanorods were successfully grown on porous silicon(PS) substrates by chemical bath deposition at a low temperature.X-ray diffraction, field-emission scanning electron microscopy(FESEM), transmission electron microscopy(TEM), and photoluminescence(PL)analyses were carried out to investigate the effect of growth duration(2 h to 8 h) on the optical and structural properties of the aligned ZnO nanorods. Strong and sharp ZnO(0 0 2) peaks of the ZnO nanorods proved that the aligned ZnO nanorods were preferentially fabricated along the c-axis of the hexagonal wurtzite structure. FESEM images demonstrated that the Zn O nanorod arrays were well aligned along the c-axis and perpendicular to the PS substrates regardless of the growth duration. The TEM image showed that the top surfaces of the ZnO nanorods were round with a smooth curvature. PL spectra demonstrated that the ZnO nanorods grown for 5 h exhibited the sharpest and most intense PL peaks within the ultraviolet range among all samples.     

New testing methodology for the quantification of rock crushability: Compressive crushing value (CCV)

Crushing is a size reduction process that plays a key role in both mineral processing and crushing-screening plant design. Investigations on rock crushability have become an important issue in mining operations and the manufacture of industrial crusher equipment. The main objective of this research is to quantify the crushability of hard rocks based on their mineralogical and mechanical properties. For this purpose, the mineralogical, physical, and mechanical properties of various hard rocks were determined. A new compressive crushing value (CCV) testing methodology was proposed. The results obtained from CCV tests were compared with those from mineralogical inspections, rock strength as well as mechanical aggregate tests. Strong correlations were found between CCV and several rock and aggregate properties such as uniaxial compressive strength (UCS), the brittleness index (S₂₀), and aggregate impact value (AIV). Furthermore, the relationship between the mineralogical properties of the rocks and their CCVs were established. It is concluded that the proposed testing methodology is simple and highly repeatable and could be utilized as a pre-design tool in the design stage of the crushing process for rock quarries.     

Changes in sea surface temperature in western South China Sea over the past 450 ka

Sea surface temperature over the past 450 ka was obtained by the unsaturation of molecular fossil-long chain alkenone with a resolution of about 1 ka from the western South China Sea. This is the longest temperature profile in the South China Sea at such high resolution. The U37^κ-SST results revealed similar glacial-interglacial cycles as the δ^18O profile of planktonic foraminifera, with SST variability of 23-25.5℃ for glacial and 25-28℃ for interglacial periods. The highest SST （28.4℃） was recorded at MIS5.5 and lowest SST （22.6℃） during MIS2. The SST record preceded the planktonic foraminiferal δ^18O on five glacial-interglacial transitions. Comparison of temperature records from the Southern and Northern Hemispheres indicated a more Southern Hemisphere-like pattern for the temperature variation in the SCS. Strong precession and semiprecession signals in the spectra of our SST record manifest the tropical phenomena.     

Adsorption recovery of Ag(I) and Au(III) from an electronics industry wastewater on a clay mineral composite

The aim of this work is to investigate the ability of an adsorbent of a clay mineral composite to remove and recover gold and silver ions from wastewater. The composite was prepared by mixing phosphogypsum (PG), obtained from an industrial waste, and a natural clay mineral. The materials were characterized before and after use in adsorption by several techniques. Batch adsorption experiments were carried out, and the effects of the contact time and the pH and temperature of solution on the removal processes were investigated. The optimum pH for the adsorption was found to be 4. The adsorption of these metal ions reached equilibrium after 2 h of contact. The pseudo-first- and the pseudo-second-order kinetic models, as well as the Freundlich and the Langmuir isotherm equations, were considered to describe the adsorption results. The maximum adsorbed amount of 85 mg·g-1 Ag(I) and 108.3 mg·g-1 Au(Ⅲ) was found. The recovery of the adsorbed gold and silver ions from the adsorbent was also analyzed. Strong acids appeared to be the best desorption agents to recover gold and silver ions. The use of aqua regia gave regeneration rates close to 95.3% and 94.3% for Ag(I) and Au(Ⅲ), respectively. Finally, the removal of gold and silver ions from an industrial wastewater was tested in batch experiments, and percentage recoveries of 76.5% and 79.9% for Ag(I) and Au(Ⅲ), respectively, were obtained. To carry out the industrial application of the proposed methodology, an economic viability study is required.     

Carbon isotopic fractionation during photolysis of hexachlorobenzene

The occurrence of carbon isotope fractionation during dechlorination of hexachlorobenzene (HCB) to pentachlorobenzene (penta-CB) has been evaluated under ultraviolet irradiation in a photo-reactor. Stable carbon isotope ratios (δ¹³C) of HCB and penta-CB increases from -27.3‰ to 18.8‰ and from -33.9‰ to -19.5‰, respectively. The isotopic fractionation of the reactants and products are described with the Rayleigh model, and the following enrichment factors (ε) are obtained: -14.8‰ for the dechlorination of HCB and 22.7‰ for the dechlorination product (penta-CB). With the initial δ¹³C value of HCB, this enrichment factor can be used to estimate the fraction (f) of HCB remaining by Rayleigh equation. Strong enrichment of δ¹³C in HCB and penta-CB during photochemical dechlorination might serve as a powerful tool to monitor the photolysis process, such information may provide additional evidence to aid in further understanding the biogeochemical processes of these compounds undergoing in the environment.     

Temperature Field and Microstructural Formation of Semi-Solid AlSi7Mg Alloy

The microstructural formation of the semi-solid AlSi₇Mg alloy stirred by electromagnetic field is investigated together with the tempeatre field of the stirred melt at continuously cooling. A important kinetic factor for primary α-Al nucleation is proposed. It is found that a low temperature gradient exists in the electromagnetic stirred melt. This is why the first dendritic arms and secondary dendritic arms are refined. Experimental results also show that the root remelting of secondary dendritic arms is an important mechanism for the primary α-Al refmement. Strong electromagnetic stirring greatly reduces the composition supercooling in the melt and eliminates preferring growth of the first dendritic arms. Therefore, many rosettes or spherical Primary α-Al phase particles form finally.     

First-principles calculations of the β′-Mg<Subscript>7</Subscript>Gd precipitate in Mg-Gd binary alloys

The metastable β’ phase is often the most effective hardening precipitate in Mg-Gd based alloys.In this paper,the structural,elastic and electronic properties of the recently identified β’-Mg7Gd precipitate in Mg-Gd binary alloys were investigated using first-principles calculations based on density functional theory.The lattice mismatches between the coherent β’-Mg7Gd precipitate and α-Mg matrix are discussed and used to rationalize the experimentally observed morphology of the precipitate.The mechanical properties were investigated through analysis of the single-crystal elastic constants and the polycrystalline elastic moduli.It is found that β’-Mg7Gd is brittle in nature.Strong covalent bonding in β’-Mg7Gd,as inferred from its electronic structure,further explains its mechanical properties.Our theoretical results show good agreement with experimental measurements.