具有良好可再生性的新型二氧化硅磁性氧化石墨烯纳米复合材料

Graphene oxide (GO) wrapped Fe₃O₄ nanoparticles (NPs) were prepared by coating the Fe₃O₄ NPs with a SiO₂ layer, and then modifying by amino groups, which interact with the GO nanosheets to form covalent bonding. The SiO₂ coating layer plays a key role in integrating the magnetic nanoparticles with the GO nanosheets. The effect of the amount of SiO₂ on the morphology, structure, adsorption, and regenerability of the composites was studied in detail. An appropriate SiO₂ layer can effectively induce the GO nanosheets to completely wrap the Fe₃O₄ NPs, forming a core-shell Fe₃O₄@SiO₂@GO composite where Fe₃O₄@SiO₂ NPs are firmly encapsulated by GO nanosheets. The optimized Fe₃O₄@SiO₂@GO sample exhibits a high saturated adsorption capacity of 253 mg·g?1 Pb(II) cations from wastewater, and the adsorption process is well fitted by Langmuir adsorption model. Notably, the composite displays excellent regeneration, maintaining a ~90% adsorption capacity for five cycles, while other samples decrease their adsorption capacity rapidly. This work provides a theoretical guidance to improve the regeneration of the GO-based adsorbents.     

微波预处理对复杂铜矿磨矿及浮选动力学的影响

The effect of CaCO₃, Na₂CO₃, and CaF₂ on the reduction roasting and magnetic separation of high-phosphorus iron ore containing phosphorus in the form of Fe₃PO₇ and apatite was investigated. The results revealed that Na₂CO₃ had the most significant effect on iron recovery and dephosphorization, followed by CaCO₃, the effect of CaF₂ was negligible. The mechanisms of CaCO₃, Na₂CO₃, and CaF₂ were investigated using X-ray diffraction (XRD), scanning electron microscopy and energy dispersive spectrometry (SEM–EDS). Without additives, Fe₃PO₇ was reduced to elemental phosphorus and formed an iron–phosphorus alloy with metallic iron. The addition of CaCO₃ reacted with Fe₃PO₇ to generate an enormous amount of Ca₃(PO₄)₂ and promoted the reduction of iron oxides. However, the growth of iron particles was inhibited. With the addition of Na₂CO₃, the phosphorus in Fe₃PO₇ migrated to nepheline and Na₂CO₃ improved the reduction of iron oxides and growth of iron particles. Therefore, the recovery of iron and the separation of iron and phosphorus were the best. In contrast, CaF₂ reacted with Fe₃PO₇ to form fine Ca₃(PO₄)₂ particles scattered around the iron particles, making the separation of iron and phosphorus difficult.     

不同硅饱和系数水榴石的碳酸化分解动力学

Carbonated decomposition of hydrogarnet is one of the vital reactions of the calcification–carbonation method, which is designed to dispose of low-grade bauxite and Bayer red mud and is a novel eco-friendly method. In this study, the effect of the silica saturation coefficient (x) on the carbonation of hydrogarnet was investigated from the kinetic perspective. The results indicated that the carbonation of hydrogarnets with different x values (x = 0.27, 0.36, 0.70, and 0.73) underwent two stages with significantly different rates, and the kinetic mechanisms of the two stages can be described by the kinetic functions R3 and D3. The apparent activation energies at Stages 1 and 2 were 41.96–81.64 and 14.80–34.84 kJ/mol, respectively. Moreover, the corresponding limiting steps of the two stages were interfacial chemical reaction and diffusion.     

一种超重力燃烧合成制备高性能高熵合金的新方法

A new method of high-gravity combustion synthesis (HGCS) followed by post-treatment (PT) is reported for preparing high-performance high-entropy alloys (HEAs), Cr_0.9FeNi_2.5V_0.2Al_0.5 alloy, whereby cheap thermite powder is used as the raw material. In this process, the HEA melt and the ceramic melt are rapidly formed by a strong exothermic combustion synthesis reaction and completely separated under a high-gravity field. Then, the master alloy is obtained after cooling. Subsequently, the master alloy is sequentially subjected to conventional vacuum arc melting (VAM), homogenization treatment, cold rolling, and annealing treatment to realize a tensile strength, yield strength, and elongation of 1250 MPa, 1075 MPa, and 2.9%, respectively. The present method is increasingly attractive due to its low cost of raw materials and the intermediate product obtained without high-temperature heating. Based on the calculation of phase separation kinetics in the high-temperature melt, it is expected that the final alloys with high performance can be prepared directly across master alloys with higher high-gravity coefficients.     

窄板坯结晶器内连铸工艺参数对钢液流场的影响

Computational simulations and high-temperature measurements of velocities near the surface of a mold were carried out by using the rod deflection method to study the effects of various operating parameters on the flow field in slab continuous casting (CC) molds with narrow widths for the production of automobile exposed panels. Reasonable agreement between the calculated results and measured subsurface velocities of liquid steel was obtained under different operating parameters of the CC process. The simulation results reveal that the flow field in the horizontal plane located 50 mm from the meniscus can be used as the characteristic flow field to optimize the flow field of molten steel in the mold. Increases in casting speed can increase the subsurface velocity of molten steel and shift the position of the vortex core downward in the downward circulation zone. The flow field of liquid steel in a 1040 mm-wide slab CC mold can be improved by an Ar gas flow rate of 7 L·min?1 and casting speed of 1.7 m·min?1. Under the present experimental conditions, the double-roll flow pattern is generally stable at a submerged entry nozzle immersion depth of 170 mm.     

电渣重熔脱硫技术研究进展

Electroslag remelting (ESR) gives a combination of liquid metal refining and solidification structure control. One of the typical aspects of liquid metal refining during ESR for the advanced steel and alloy production is desulfurization. It involves two patterns, i.e., slag–metal reaction and gas–slag reaction (gasifying desulfurization). In this paper, the advances in desulfurization practices of ESR are reviewed. The effects of processing parameters, including the initial sulfur level of consumable electrode, remelting atmosphere, deoxidation schemes of ESR, slag composition, melting rate, and electrical parameters on the desulfurization in ESR are assessed. The interrelation between desulfurization and sulfide inclusion evolution during ESR is discussed, and advancements in the production of sulfur-bearing steel at a high-sulfur level during ESR are described. The remaining challenges for future work are also proposed.     

利用皮秒激光烧蚀制备非球形铝纳米颗粒

We report the picosecond laser ablation of aluminum targets immersed in a polar organic liquid (chloroform, CHCl₃) with ~2 ps laser pulses at an input energy of ~350 μJ. The synthesized aluminum nanoparticles exhibited a surface plasmon resonance peak at ~340 nm. Scanning electron microscopy images of Al nanoparticles demonstrated the spherical morphology with an average size of (27 ± 3.6) nm. The formation of smaller spherical Al nanoparticles and the diminished growth could be from the formation of electric double layers on the Al nanoparticles. In addition to spherical aluminum nanoparticles, triangular/pentagonal/hexagonal nanoparticles were also observed in the colloidal solution. Field emission scanning electron microscopy images of ablated Al targets demonstrated laser induced periodic surface structures (LIPSSs), which were the high spatial frequency LIPSSs (HSF-LIPSSs) since their grating period was ~280 nm. Additionally, coarse structures with a period of ~700 nm were observed.     

Mineral transition and formation mechanism of calcium aluminate compounds in CaO?Al2O3?Na2O system during high-temperature sintering

The mineral transition and formation mechanism of calcium aluminate compounds in CaO?Al₂O₃?Na₂O system during the high-temperature sintering process were systematically investigated using DSC?TG, XRD, SEM?EDS, FTIR, and Raman spectra, and the crystal structure of Na₄Ca₃(AlO₂)₁₀ was also simulated by Material Studio software. The results indicated that the minerals formed during the sintering process included Na₄Ca₃(AlO₂)₁₀, CaO·Al₂O₃, and 12CaO·7Al₂O₃, and the content of Na₄Ca₃(AlO₂)₁₀ could reach 92wt% when sintered at 1200°C for 30 min. The main formation stage of Na₄Ca₃(AlO₂)₁₀ occurred at temperatures from 970 to 1100°C, and the content could reach 82wt% when the reaction temperature increased to 1100°C. The crystal system of Na₄Ca₃(AlO₂)₁₀ was tetragonal, and the cells preferred to grow along crystal planes (110) and (210). The formation of Na₄Ca₃(AlO₂)₁₀ was an exothermic reaction that followed a secondary reaction model, and its activation energy was 223.97 kJ/mol.     

含细夹层的分矿充填层中流动特性的可视化

Ore particles, especially fine interlayers, commonly segregate in heap stacking, leading to undesirable flow paths and changeable flow velocity fields of packed beds. Computed tomography (CT), COMSOL Multiphysics, and MATLAB were utilized to quantify pore structures and visualize flow behavior inside packed beds with segregated fine interlayers. The formation of fine interlayers was accompanied with the segregation of particles in packed beds. Fine particles reached the upper position of the packed beds during stacking. CT revealed that the average porosity of fine interlayers (24.21%) was significantly lower than that of the heap packed by coarse ores (37.42%), which directly affected the formation of flow paths. Specifically, the potential flow paths in the internal regions of fine interlayers were undeveloped. Fluid flowed and bypassed the fine interlayers and along the sides of the packed beds. Flow velocity also indicated that the flow paths easily gathered in the pore throat where flow velocity (1.8 × 10?5 m/s) suddenly increased. Fluid stagnant regions with a flow velocity lower than 0.2 × 10?5 m/s appeared in flow paths with a large diameter.     

诗与"在"--海德格尔诗学的阐释

海德格尔对荷尔德林诗歌的阐释，目的是进行诗与思的对话，归根结底还是探讨存在。诗与“在”的关系，是海氏诗学框架的核心内容，诗与“在”的关系又进一步引申为艺术与真理的关系，本从真理如何被遮蔽的问题入手，试图读解海德格尔诗学的内涵。艺术是无蔽的真理显明的一种方式，诗是危机的拯救，语言是存在的家园。海德格尔对诗与在的探讨最后又转入了对语言的探讨，无法走出语言的牢笼。只有在实践中，把艺术变成为社会变革的一个因素，才可以解放被传统理性压迫的力量，显现艺术的真理，确立艺术的价值。     

Regulation of canonical Wnt/β-catenin pathway in the nucleus

Canonical Wnt/β-catenin pathway plays a central role in development, homeostasis, as well as tumorigenesis. The regulation of the pathway involves various and complicated mechanisms, including the extracellular, intracellular and endonuclear regulation. As the key component of the pathway, the Lefl/Tcfs-β-catenin complex is also the key target of regulation in the nucleus. In the current review, we are going to summarize the regulators in the nucleus which can modify the transcrip- tional activity of the Wnt/β-catenin pathway.     

On Tragic Consciousness In The Works By Ernest Hemingway

As an American modern novelist who were famous in the literary world, Hemingway was not a person who always followed the trend but a sharp observer. At the same time, he was a tragedy maestro, he paid great attention on existence, fate and end-result. The dramatis personae's tragedy of his works was an extreme limit by all means tragedy on the meaning of fearless challenge that failed. The beauty of tragedy was not produced on the destruction of life, but now this kind of value was in the impact activity. They performed for the reader about the tragedy on challenging for the limit and the death.     

Exchange-Correlation and Electronic Excitation Energies from Pairing Matrix Fluctuations

We have developed an adiabatic connection to formulate the ground-state exchange-correlation energy in terms of pairing matrix linear fluctuations.This formulation of the exchange-correlation energy opens a new channel for density functional approximations based on the many-body perturbation theory.We illustrate the potential of such approaches with an approximation based on the particle-particle Random Phase Approximation(pp-RPA).This re-     

论信托财产的人格性

信托财产是信托关系的基本要素,由于信托的特殊性,信托财产与传统民法的财产有很大区别,正确给信托财产定位,是信托业得以健康发展的核心问题。信托财产的特性在于其人格性,而这种人格性的赋予是以交易成本最小化为动因,尽管信托财产人格性设计对受益人的利益有偏袒,但从社会成本而言,其目的在于促使交易成本最小化,当然,对信托财产的人格性不能绝对化,由于利益平衡的需求,往往在特定情况下对信托财产予以人格否认。     

卤素离子在多晶铜电极表面的微分电容研究

本文通过测量金属晶体电极表面的微分电容研究了金属电极表面在金属与水溶液界面上的吸附能力,以及金属与吸附质之间的相互作用。文中论述了多晶铜电极在(0.5-x)mNaClO_4+xmNaBr的一系列不同x值的溶液中的微分电容测量值及微分电容-电位曲线,证明了F~-和ClO_4~-离子在多晶铜电极表面是非常弱的吸附,Br~-离子在多晶铜电极表面具有特定的吸附,每条电容-电位曲线有一个凸起的峰。在峰所对应的位能值,金属表面对阴离子的吸附能力强,证实金属-吸附质之间的相互作用强,吸附的阴离子在过渡层中散射导电电子的能力也强。对于相同阴离子和金属的体系,其微分电容与吸附质的浓度、电压、溶液的pH值和表面的非均匀性等因素密切有关。研究证明,金属晶体电极表面在电解质溶液中的微分电容的变化规律类似于表面电反射信号的强弱变化规律,微分电容大小取决于金属-吸附质之间的电荷转移程度。     

气体对阴离子表活剂压裂液破胶实验研究

阴离子表活剂压裂液是新型清洁压裂液,原油和地层水对其破胶机理与实验研究已相当充分,但气体对其破胶作用至今研究很少.为解决阴离子表活剂压裂液在压裂应用中的障碍,研究采用一套实用的实验流程,评价了天然气、氮气、二氧化碳三种常见气体对阴离子表活剂压裂液的影响.实验证明,三种不同的气体对阴离子表活剂压裂液的降粘幅度存在较大的差别,其中,二氧化碳气体对阴离子清洁压裂液降粘幅度最大,可使交联液体彻底破胶,天然气对阴离子型表活剂压裂液降粘幅度较小,氮气对阴离子压裂液的粘度几乎没有影响,氮气和天然气可以使液体泡沫化,从而有利于返排.实验结果为优化压裂设计提供了依据,可有效提高现场压裂施工成功率.     

多腔速调管主要性能指标简化分析

介绍了速调管在我国的发展现状和几种不同结构的多腔速调管的主要特性比较,并给出了小信号条件下速调管的各种主要特性的简化分析方法.在这种简化分析方法中,把多腔速调管看作是几个双腔速调管的级联,并且没有考虑非线性、空间电荷效应和相对论效应等带来的影响,目的是阐述基本原理和基本分析方法.     

DEM/CFD modelling of the deposition of dilute granular systems in a vertical container

Deposition of granular materials into a container is a general industrial packing process. In this study, the deposition behaviour of dilute granular mixtures consisting of two types of particles that were of the same particle size but different particle densities in the presence of air was numerically analyzed using a coupled discrete element method （DEM） and computational fluid dynamics （CFD）. Bilayer granular mixtures with light particles at bottom and heavy particles at top were first simulated. It was found that the presence of air significantly affected the flow behaviour of the bilayer mixtures. For the system with a relatively low initial void fraction, the air entrapped inside the container escaped through the dilated zones induced due to the friction between the powder bed and wall surfaces. The escaping air streams entrained light particles that were originally located at the bottom of the granular system. Consequently, these light particles were migrated to the top of the granular bed at the end of deposition process. More light particles were migrated when the deposition distance was increased. For the system with a high initial void fraction, some light particles penetrated into the top layer of heavy particles and created a mixing zone. Deposition of random mixtures with different initial void fractions was also investigated and the influence of initial void fraction on the segregation behaviour was explored as well. It was found that the increase of void fraction promoted segregation during the deposition in air. It was demonstrated that, for granular mixtures consisting of particles of different air sensitivities, the presence of air had a significant impact on the mixing and segregation behaviour during the deposition.     

Using new fusion operations to improve trust expressiveness of subjective logic

Subjective logic provides a means to describe the trust relationship of the real world.However,existing fusion operations it offers treat fused opinions equally,which makes it impossible to deal with the weighted opinions effectively.A.Jφsang presents a solution,which combines the discounting operator and the fusion operator to produce the consensus to the problem.In this paper,we prove that this approach is unsuitable to deal with the weighted opinions because it increases the uncertainty of the consensus.To address the problem,we propose two novel fusion operators that are capable of fusing opinions according to the weight of opinion in a fair way,and one of the strengths of them is improving the trust expressiveness of subjective logic.Furthermore,we present the justification on their definitions with the mapping between the evidence space and the opinion space.Comparisons between existing operators and the ones we proposed show the effectiveness of our new fusion operations.