Ionization and dissociation of CH<Subscript>2</Subscript>I<Subscript>2</Subscript> and CH<Subscript>2</Subscript>ICl in femtosecond intense field

With the development of ultrafast laser technique,the femtosecond laser electric field is comparable to themolecular field experienced by valence electrons. In thiscase, the classical quantum mechanical theory, based onperturbation theory, becomes inapplicable. Theoreticalunderstanding of the interaction of molecules with intenselaser radiation is quite difficult. The Coulomb explosionhas been extensively studied[1—10] and explained by somesemiclassical models, such as the above threshold ion…     

One-pot synthesis of PVP-coated Ni<Subscript>0.6</Subscript>Fe<Subscript>2.4</Subscript>O<Subscript>4</Subscript> nanocrystals

Novel poly(N-vinyl-2-pyrrolidone) (PVP)-coated nickel ferrite nanocrystals were prepared by simultaneously pyrolyzing nickel(II) acetylacetonate (Ni(acac)₂) and iron(III) acetylacetonate (Fe(acac)₃) in N-vinyl-2-pyrrolidone (NVP). The PVP coating was formed in situ through polymerization of NVP. The crystalline structure of the resultant nickel ferrite was analyzed by high-resolution transmission electron microscopy, electron diffraction patterns, and powder X-ray diffraction. In addition, the valence state of Ni and the metal contents of Ni and Fe in different valence states were analyzed by X-ray photoelectron spectroscopy (XPS), atomic absorption and the phenanthroline method. The surface coating layer of PVP and its binding states were characterized by Fourier transform infrared spectroscopy in combination with XPS. Colloidal stability experiments revealed that the nanocrystals could be dispersed well in both phosphate-buffered saline and Dulbecco’s Modified Eagle Medium.     

Decay dynamics of excited CS<Subscript>2</Subscript> and NH<Subscript>3</Subscript> investigated by femtosecond laser

By using the home-made femtosecond laser system and the time-of-flightmass spectrometer, the decay dynamics of excited carbon disulfide (CS2) and ammonia (NH3) are investigated in real time by pump-probe multiphoton ionization detection. The estimated lifetime constant of the NH3 state (514 fs) agreed quite well with the literature report. For the first time, the decay lifetime constants of the NH3 ′1A′1 state (93793 fs), the CS2 state (153 ± 10 fs), and the CS2 Rydberg state[2-3]6sσg(3Ⅱg)(948 ± 23 fs) are obtained.     

Preparation and upconversion luminescence of YVO<Subscript>4</Subscript>:Er<Subscript>3+</Subscript>, Yb<Subscript>3+</Subscript>

YVO₄:Er³⁺, Yb³⁺ with varying Yb³⁺ concentrations were prepared by a precipitation method. The results of X-ray diffraction (XRD) show that all the samples have a tetragonal zircon structure; the calculated average crystallite sizes are in the range of 14–22 nm. The lattice constants and cell volume of the samples decrease slightly with the increase in Yb³⁺ concentration. The upconversion luminescence spectra of all the samples were studied under 980 nm laser excitation. The strong green emission is observed, which is attributed to the ²H_11/2 → ⁴I_15/2 and ⁴S_3/2→⁴I_15/2 transitions of Er³⁺, and the red emission peaks in 650–675 nm can be ignored. The emission intensity for the sample depends on the Yb³⁺ concentration. These results reveal that the upconversion processes of YVO₄:Er³⁺, Yb³⁺ are related to the structure and the doping Yb³⁺ concentration of the sample.     

Preparation and luminescence properties of YeO3：Er^3＋/TiO2 with high specific surface area

The three composites Y2O3 :Er3+ , Y2O3 :Er3+ /Yb 3+ andY2O3 :Er3+ /TiO2 were prepared using coprecipitation and sol-gel techniques. Their morphology, specific surface area, porosity, UV-vis. absorption spectra and fluorescence spectra were measured using SEM, TEM, surface analysis, UV-vis. absorption and photoluminescence spectrophotometry. SEM and TEM showed that samples prepared using coprecipitation were dispersed, while Y2O3 :Er3+ /TiO2 particles possessed a mesoporous surface and average diameter of ab...     

Preparation and radar-absorbing properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiO<Subscript>2</Subscript>/Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/Yb<Subscript>2</Subscript>O<Subscript>3</Subscript> composite powder

Al₂O₃/TiO₂/Fe₂O₃/Yb₂O₃ composite powder was synthesized via the sol-gel method. The structure, morphology, and radar-absorption properties of the composite powder were characterized by transmission electron microscopy, X-ray diffraction analysis and RF impedance analysis. The results show that two types of particles exist in the composite powder. One is irregular flakes (100-200 nm) and the other is spherical Al₂O₃ particles (smaller than 80 nm). Electromagnetic wave attenuation is mostly achieved by dielectric loss. The maximum value of the dissipation factor reaches 0.76 (at 15.68 GHz) in the frequency range of 2-18 GHz. The electromagnetic absorption of waves covers 2-18 GHz with the matching thicknesses of 1.5-4.5 mm. The absorption peak shifts to the lower-frequency area with increasing matching thickness. The effective absorption band covers the frequency range of 2.16-9.76 GHz, and the maximum absorption peak reaches -20.18 dB with a matching thickness of 3.5 mm at a frequency of 3.52 GHz.     

Static synthesis of high-quality MCM-22 zeolite with high SiO2／Al2O3 ratio

We demonstrate a synthesis method to broaden the range of SiO2/Al2O3 ratio (30-100) of high-silica MCM-22 zeolites by prolonging the aging time of the gel before the crystallization. The synthesis conditions such as silica sources, chemical compositions of initial gel and aging time of gel were investigated in detail.High quality MCM-22 products with various morphologies have been synthesized by optimize their synthesis conditions.Our results show that increasing of the aging time can make the gel be homogenization and promote their nucleus formation,which may avoid the formation of impurity phase and thus broaden the range of SiO2/Al2O3 ratio.     

Reaction condition optimization and kinetic investigation of roasting zinc oxide ore using (NH<Subscript>4</Subscript>)<Subscript>2</Subscript>SO<Subscript>4</Subscript>

An orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore using (NH₄)₂SO₄. The optimized reaction conditions are defined as an (NH₄)₂SO₄/zinc molar ratio of 1.4:1, a roasting temperature of 440°C, and a thermostatic time of 60 min. The molar ratio of (NH₄)₂SO₄/zinc is the most predominant factor and the roasting temperature is the second significant factor that governs the zinc extraction. Thermogravimetric–differential thermal analysis was used for (NH₄)₂SO₄ and zinc mixed in a molar ratio of 1.4:1 at the heating rates of 5, 10, 15, and 20 K·min-1. Two strong endothermic peaks indicate that the complex chemical reactions occur at approximately 290°C and 400°C. XRD analysis was employed to examine the transformations of mineral phases during roasting process. Kinetic parameters, including reaction apparent activation energy, reaction order, and frequency factor, were calculated by the Doyle–Ozawa and Kissinger methods. Corresponding to the two endothermic peaks, the kinetic equations were obtained.     

Preparation and luminescence characteristics of Sr3SiO5：Eu^2＋ phosphor for white LED

The Sr3SiO5：Eu^2＋ phosphor was synthesized by high temperature solid-state reaction. The emission spectrum of Sr3SiO5：Eu^2＋ shows two bands centered at 487 and 575 nm, which well agree with the theoretic values of emission spectrum. The excitation spectrum for 575 nm emission center has several excitation bands at 365, 418, 458 and 473 nm. And the results show that the emission spectrum of Sr3SiO5：Eu^2＋ is influenced by the Eu^2＋ concentration. The relative emission spectra of the white-emitting InGaN-based YAG：Ce^3＋ LED and Sr3SiO5：Eu^2＋ LED were investigated. The results show that the color development of InGaN-based Sr3SiO5：Eu^2＋ is better than that of InGaN-based YAG：Ce^3＋, and the CIE chromaticity of InGaN-based Sr3SiO5：Eu^2＋ is （x=0.348, y=0.326）.     

Chemical quenching and inhibition of positronium in Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

The pore structure of Cr2O3/Al2O3 catalysts and the surface chemical properties of these pores were characterized by positron lifetime and coincidence Doppler broadening (CDB) measurements. Four lifetime components could be resolved from the positron lifetime spectrum, with two long lifetime components and two short lifetime components. The two long lifetimes τ4 and τ3 are attributed to ortho-positronium (o-Ps) annihilation in large pores and microvoids, respectively. With increasing Cr2O3 content, both τ4 and its intensity I4 show sharp decrease, while τ3 and its intensity I3 keep nearly unchanged. The Doppler broadening S parameters also show sharp decrease with increasing Cr2O3 content. Detailed analysis of the CDB spectrum reveals that the parapositronium (p-Ps) intensity also decreases with increasing Cr2O3 content. This indicates that the change of o-Ps lifetime τ4 is due to the chemical quenching by Cr2O3 but not spin-conversion of positronium. The decrease of o-Ps intensity I4 indicates that Cr2O3 also inhibits positronium formation.     

Preparation and electrochemical performance of double perovskite La<Subscript>2</Subscript>CoMnO<Subscript>6</Subscript> nanofibers

Through electrospinning, La₂CoMnO₆ nanofibers were prepared from a polyvinylpyrrolidone/lanthanum nitrate–cobalt acetate–manganese acetate (PVP/LCM) precursor and were used as electrode materials. The morphologies and structures of the samples were characterized by field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) specific surface area analysis. The results show that the prepared La₂CoMnO₆ nanofibers are stable, one-dimensional structures formed from interconnected La₂CoMnO₆ nanoparticles with a diamond-like crystal structure. The specific surface area of the fibers is 79.407 m2·g-1. Electrochemical performance tests with a three-electrode system reveal the specific capacitance of the La₂CoMnO₆ nanofibers as 109.7 F·g-1 at a current density of 0.5 A·g-1. After 1000 charge-discharge cycles at a current density of 1 A·g-1, the specific capacitance maintains 90.9% of its initial value, demonstrating a promising performance of the constraint capacitance and good cyclic stability.     

Preparation of Al<Subscript>72</Subscript>Ni<Subscript>8</Subscript>Ti<Subscript>8</Subscript>Zr<Subscript>6</Subscript>Nb<Subscript>3</Subscript>Y<Subscript>3</Subscript> amorphous powders and bulk materials

Amorphous Al₇₂Ni₈Ti₈Zr₆Nb₃Y₃ powders were successfully fabricated by mechanical alloying. The microstructure, glass-forming ability, and crystallization behavior of amorphous Al₇₂Ni₈Ti₈Zr₆Nb₃Y₃ powders were investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC). The isothermal crystallization kinetics was analyzed by the Johnson–Mehl–Avrami equation. In the results, the supercooled liquid region of the amorphous alloy is as high as 81 K, as determined by non-isothermal DSC curves. The activation energy for crystallization is as high as 312.6 kJ·mol?1 obtained by Kissinger and Ozawa analyses. The values of Avrami exponent (n) imply that the crystallization is dominated by interface-controlled three-dimensional growth in the early stage and the end stage and by diffusion-controlled two- or three-dimensional growth in the middle stage. In addition, the amorphous Al₇₂Ni₈Ti₈Zr₆Nb₃Y₃ powders were sintered under 2 GPa at temperatures of 673 K and 723 K. The results show that the Vickers hardness of the compacted powders is as high as Hv 1215.     

Structural and electrical properties of HCl-polyaniline-Ag composites synthesized by polymerization using Ag-coated (NH4)2S2O8 powder

Ag nanoparticles were sputter-deposited on ammonium persulfate ((NH₄)₂S₂O₈) powder to obtain (NH₄)₂S₂O₈-Ag powder, which was used to synthesize the HCl-doped polyaniline-Ag (HCl-PANI-Ag) composite via a polymerization procedure. The Ag nanoparticles were dispersed in the HCl-PANI matrix, and their sizes mainly ranged from 3 to 6 nm. The Ag nanoparticles did not affect the structure of emeraldine salt in the composite, and they increased the ordered crystalline regions in the HCl-PANI matrix. The HCl-PANI-Ag composite had a conductivity of (6.8 ±0.1) S/cm, which is about four times larger than that of the HCl-PANI. The charge transport mechanism in the composite is explained by the three-dimensional Mott variable-range hopping (3D-Mott-VRH).     

Up-conversion luminescence of Er^3＋ doped and Er^3＋/Yb^3＋ co-doped YTaO4

The synthesis and up-conversion luminescent properties of YTaO4：Er^3＋ and YTaO4：Er^3＋/Yb^3＋ are reported for the first time. According to the measurement results of up-conversion spectra, Yb^3＋ co-doping can remarkably enhance the green （^2H11/2/^4S3/2→^4I15/2） and red （^4F9/2→^4I15/2） emissions, but depress the infrared emission （^4I9/2→^4I15/2）. With the increase of the Yb^3＋ concentration, the intensity of green emission increases, after that, when the Yb^3＋ concentration increases continuously, the intensity of green emission decreases, while those of the red and infrared emissions increase and decrease alternately. In addition, the up-conversion mechanisms of Er^3＋ doped and Er^3＋/Yb^3＋ co-doped YTaO4 are also discussed. It is found that the transform of up-conversion mechanism from two-step energy transfer to cooperating sensitization takes place when Yb^3＋ concentration is increased up to 12 mol%. With the further increase of Yb^3＋ concentration, the energy-back-transfer gradually becomes the dominant up-conversion mechanism, which results in the quenching of the green emission and slight increasing of the red and infrared emissions.     

Synthesis, Characterization and Calorimetry of Ni（C4H8N2O3）2Cl2

A coordination complex was synthesized from NiCl2 and dipeptide glycylglycine（GG）. It was characterized by element analysis, NMR and TG methods, and then was determined to be Ni（C4HsN2O3）2Cl2. Using an isoperibolic reaction calorimeter, the standard molar enthalpy of formation of Ni（GG）2Cl2（solid） has been determined to be -（1 674.66±2.02） kJ · mol^-1 at 298.15 K.     

Preparation of In<Subscript>2</Subscript>S<Subscript>3</Subscript> and Cu-Doped In<Subscript>2</Subscript>S<Subscript>3</Subscript> 2D Ultrathin Nanoflakes with Tunable Absorption and Intense Photocurrent Response

We reported an effective method to synthesize In₂S₃ and Cu-doped In₂S₃ two-dimensional ultrathin nanoflakes by the hydrothermal method through tuning the Cu/In molar ratio. The transmission electron microscope images showed that the products had ultrathin flake-like shape with wrinkling and rolling. The X-ray diffraction patterns indicated the crystal phase of nanoflakes was varied from β-In₂S₃ to tetragonal-CuInS₂ as the Cu/In molar ratio was increased. The In₂S₃ nanoflakes exhibited absorption band at 450 nm, while new absorption peaks in turn appeared at 550 nm and 670 nm as the Cu/In molar ratio was increased. In addition, the two-dimensional ultrathin nanoflakes exhibited intense photocurrent response.     

Preparation and characterization of porous ceramics prepared by kaolinite gangue and Al(OH)<Subscript>3</Subscript> with double addition of MgCO<Subscript>3</Subscript> and CaCO<Subscript>3</Subscript>

Porous ceramics were prepared from kaolinite gangue and Al(OH)₃ with double addition of MgCO₃ and CaCO₃ by the pore-forming in-situ technique. The characterizations of porous ceramics were investigated by X-ray diffractometry, scanning electron microscopy, and mercury porosimetry measurements, etc. It is found that although the decomposition of MgCO₃ and CaCO₃ has little contribution to the porosity, the double addition of MgCO₃ and CaCO₃ strongly affects the formation of liquid phase, and then changes the phase compositions, pore characterization, and strength. The appropriate mode is the sample containing 1.17wt% MgCO₃ and 1.17wt% CaCO₃, which has high apparent porosity (41.0%), high crushing strength (53.5 MPa), high mullite content (76wt%), and small average pore size (3.24 μm).     

Electrical conductivity optimization of the Na3AlF6-Al2O3-Sm2O3 molten salts system for Al-Sm intermediate binary alloy production

Metal Sm has been widely used in making Al-Sm magnet alloy materials. Conventional distillation technology to produce Sm has the disadvantages of low productivity, high costs, and pollution generation. The objective of this study was to develop a molten salt electrolyte system to produce Al-Sm alloy directly, with focus on the electrical conductivity and optimal operating conditions to minimize the energy consumption. The continuously varying cell constant (CVCC) technique was used to measure the conductivity for the Na₃AlF₆-AlF₃-LiF-MgF₂-Al₂O₃-Sm₂O₃ electrolysis medium in the temperature range from 905 to 1055℃. The temperature (t) and the addition of Al₂O₃ (W(Al₂O₃)), Sm₂O₃ (W(Sm₂O₃)), and a combination of Al₂O₃ and Sm₂O₃ into the basic fluoride system were examined with respect to their effects on the conductivity (κ) and activation energy. The experimental results showed that the molten electrolyte conductivity increases with increasing temperature (t) and decreases with the addition of Al₂O₃ or Sm₂O₃ or both. We concluded that the optimal operation conditions for Al-Sm intermediate alloy production in the Na₃AlF₆-AlF₃-LiF-MgF₂-Al₂O₃-Sm₂O₃ system are W(Al₂O₃) + W(Sm₂O₃)=3wt%, W(Al₂O₃):W(Sm₂O₃)=7:3, and a temperature of 965 to 995℃, which results in satisfactory conductivity, low fluoride evaporation losses, and low energy consumption.     

Selective formation of tetrahedral Pt nanocrystals from K2PtCl6／PVP

Tetrahedral platinum (Pt) nanocrystals (3-8 nm) are synthesized in high selectivity (ca. 80%) from hydrogen reduction of aqueous K2PtCI6 by using polyvinylpyr-rolidone (PVP: Mw≈360000) as a protector. Morphology (TEM) measurements of the metal colloids and UV-Vis absorption of the colloidal solution are employed to monitor the tetrahedron formation during the syntheses with varying K2PtCl6/PVP ratios. The results clearly show a two-stage process for the selective formation of tetrahedral nanocrystals. Rapid nucleation and crystal formation at the early stage result in round-like crystallites and the external facet evolution in thereafter slow crystal growth leads selectively to the formation of the tetrahedrons.     

Preparation and luminescence properties of monodisperse silica/aminosilane-coated Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Yb,Ho upconversion nanoparticles

Monodisperse silica/aminosilane-coated Y 2 O 3:Yb,Ho nanoparticles are prepared via homogenous precipitation combined with a polyvinylpyrrolidone-assisted ammoniation method.The factors that contribute to the success of the coating are examined,and the procedure is optimized.Compared with uncoated nanoparticles,coated nanoparticles exhibit an increased ratio of green to red emission intensity,which can mainly be attributed to the decreased number of surface defects induced by the surface coating.