MgO对球团矿抗压强度的影响

以经焙烧处理的菱镁石作为含MgO添加剂生产氧化球团,考察了MgO含量对氧化球团抗压强度的影响.研究表明:随着球团矿中MgO含量的增加,球团矿的抗压强度逐渐下降.其主要原因为:球团中MgO含量的增加使得球团中Fe3O4氧化成Fe2O3再结晶过程减弱,连晶不完全,且分布不均,不利于球团矿的固结;通过对不同MgO含量的球团矿的孔隙分布及孔隙度分析可知,随着球团矿中MgO含量的增加,球团矿的孔径及孔隙度逐渐增大,导致球团矿的抗压强度不断下降.     

Acting mechanism of F,K, and Na in the solid phase sintering reaction of the Baiyunebo iron ore

The effect of F, K, and Na on the solid phase reaction of the Baiyunebo iron ore was investigated by differential thermal analysis (DTA) and X-ray diffraction (XRD). It has been identified that alkaline elements K and Na in the Baiyunebo ore instigate the formation of low melting point compounds Na₂SiO₃ and Na₂O·Fe₂O₃ and the generation of molten state in the solid phase sintering. Element F in the Baiyunebo ore facilitates the formation of cuspidine compound 3CaO·2SiO₂·CaF₂ in the solid phase reaction. The cuspidine compound is kept in solid as one of the final products through the entire sintering process due to its high melting point. In the sintering process, CaF₂ and SiO₂ react with CaO first and form 3CaO·2SiO₂·CaF₂ and 3CaO·2SiO₂, so the formation of ferrites, Na₂O·Fe₂O₃, and 2CaO·Fe₂O₃ is inhibited.     

Effect of aluminum oxide on the compressive strength of pellets

Analytical-reagent-grade Al₂O₃ was added to magnetite ore during the process of pelletizing, and the methods of mercury intrusion, scanning electron microscopy, and image processing were used to investigate the effect of Al₂O₃ on the compressive strength of the pellets. The results showed that, as the Al₂O₃ content increased, the compressive strength of the pellets increased slightly and then decreased gradually. When a small amount of Al₂O₃ was added to the pellets, the Al₂O₃ combined with fayalite (2FeO·SiO₂) and the aluminosilicate (2FeO·2Al₂O₃·5SiO₂) was generated, which releases some iron oxide and reduces the inhibition of fayalite to the solid phase of consolidation. When Al₂O₃ increased sequentially, high melting point of Al₂O₃ particles hinder the oxidation of Fe₃O₄ and the recrystallization of Fe2O3, making the internal porosity of the pellets increase, which leads to the decrease in compressive strength of the pellets.     

Synthesis and application of bilayer-surfactant-enveloped Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: water-based bilayer-surfactant-enveloped ferrofluids

Superparamagnetic carbon-coated Fe₃O₄ nanoparticles with high magnetization (85 emu·g-1) and high crystallinity were synthesized using polyethylene glycol-4000 (PEG (4000)) as a carbon source. Fe₃O₄ water-based bilayer-surfactant-enveloped ferrofluids were subsequently prepared using sodium oleate and PEG (4000) as dispersants. Analyses using X-ray photoelectron spectroscopy, X-ray diffraction, and Fourier-transform infrared spectroscopy indicate that the Fe₃O₄ nanoparticles with a bilayer surfactant coating retain the inverse spinel-type structure and are successfully coated with sodium oleate and PEG (4000). Transmission electron microscopy, vibrating sample magnetometry, and particle-size analysis results indicate that the coated Fe₃O₄ nanoparticles also retain the good saturation magnetization of Fe₃O₄ (79.6 emu·g-1) and that the particle size of the bilayer-surfactant-enveloped Fe₃O₄ nanoparticles is 42.97 nm, which is substantially smaller than that of the unmodified Fe₃O₄ nanoparticles (486.2 nm). UV–vis and zeta-potential analyses reveal that the ferrofluids does not agglomerate for 120 h at a concentration of 4 g·L-1, which indicates that the ferrofluids are highly stable.     

Isothermal reduction of titanomagnetite concentrates containing coal

The isothermal reduction of the Panzhihua titanomagnetite concentrates (PTC) briquette containing coal under argon atmosphere was investigated by thermogravimetry in an electric resistance furnace within the temperature range of 1250–1350℃. The samples reduced in argon at 1350℃ for different time were examined by X-ray diffraction (XRD) analysis. Model-fitting and model-free methods were used to evaluate the apparent activation energy of the reduction reaction. It is found that the reduction rate is very fast at the early stage, and then, at a later stage, the reduction rate becomes slow and decreases gradually to the end of the reduction. It is also observed that the reduction of PTC by coal depends greatly on the temperature. At high temperatures, the reduction degree reaches high values faster and the final value achieved is higher than at low temperatures. The final phase composition of the reduced PTC-coal briquette consists in iron and ferrous-pseudobrookite (FeTi₂O₅), while Fe_2.75Ti_0.25O₄, Fe_2.5Ti_0.5O₄, Fe_2.25Ti_0.75O₄, ilmenite (FeTiO₃) and wustite (FeO) are intermediate products. The reaction rate is controlled by the phase boundary reaction for reduction degree less than 0.2 with an apparent activation energy of about 68 kJ·mol?1 and by three-dimensional diffusion for reduction degree greater than 0.75 with an apparent activation energy of about 134 kJ·mol?1. For the reduction degree in the range of 0.2–0.75, the reaction rate is under mixed control, and the activation energy increases with the increase of the reduction degree.     

Corrosion behavior of ferritic ODS steel prepared by adding YH_2 nanoparticles in supercritical water at 600 °C

The corrosion behavior of the ferritic oxide dispersion strengthened(ODS)steel(14Cr-3Al-2W-0.1Ti)prepared by adding YH_2nanoparticles(NPs)was investigated in supercritical water(SCW)at 600°C for 1500 h.The mass gain of the ODS steel(215.5 mg/dm~2)was lower than that of SUS430 steel(357.2 mg/dm~2).A dual oxide layer generated on the surface of ODS steel after corrosion in SCW.The outer layer was composed of Fe_2O_3and Fe_3O_4,while the inner layer composed of the spinel-type FeCr_2O_4together with Al_2O_3.The generation of Y_2Ti_2O_7NPs in the ODS steel by adding YH_2NPs prohibits the formation of Y-Al-O particles and leaves more Al available to form a continuous protective oxide scale to improve the corrosion resistance.Moreover,the Y_2Ti_2O_7NPs act as efficient barriers to suppress the outward diffusion of metal atoms.This novel ODS steel shows potential applications in supercritical water.     

Subsolidus phase relations in the system MgO-ZnO-SiO2 at high pressure

The subsolidus phase relations were determined experimentally in the system MgO-ZnO-SiO2 at 1.0 GPa and 1 200℃, by use of the high-pressure apparatus "piston-cylinder". The results showed characteristics of the phases assemblage different from that in similar ternary systems. It is impossible to form complete Mg2SiO4-Zn2SiO4 olivine and Mg2Si2O6-Zn2Si2O6 pyroxene solid solution. This is controlled by the properties of Zn2+ with an outer layer of electron (Ar)3d10, different from others transition metal ions, like Fe2+ , Ni2+ , Co2+ .     

Phase transformation behavior of titanium during carbothermic reduction of titanomagnetite ironsand

The reduction of titanomagnetite (TTM) ironsand, which contains 11.41wt% TiO₂ and 55.63wt% total Fe, by graphite was performed using a thermogravimetric analysis system under an argon gas atmosphere at 1423–1623 K. The behavior and effects of titanium in TTM ironsand during the reduction process were investigated by means of thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. During the reduction procedure, the titanium concentrated in the slag phase, where the phase transformation followed this sequence: FeO + FeTiO₃ → Fe₂TiO₄ → FeTiO₃ → FeTi₂O₅ → TiO₂. The calculated results for the reduction kinetics showed that the carbothermic reduction was controlled by the diffusion of ions through the product layer. Furthermore, the apparent activation energy was 170.35 kJ·mol-1.     

Formation mechanism of an aluminium-based chemical conversion coating on AZ91D magnesium alloy

An environmentally clean aluminium-based conversion coating on AZ91D magnesium alloy was studied in aluminium nitrate solutions. The morphology, composition, structure, and formation mechanism of the coating were investigated in detail using scanning electron microscopy/energy dispersion spectrometry, X-ray diffraction, transmission electron microscopy, and electrochemical corrosion tests. The results show that the conversion coating is composed of magnesium, aluminium, and oxygen, and shows an amorphous structure. In the initial stage of coating formation, the grain-like nucleus is composed of Al₁₀O₁₅·xH₂O, (Al₂O₃)_5.333, Al₂O₃, AlO(OH), MgAl₂O₄, (Mg_0.88Al_0.12)(Al_0.94Mg_0.06)₂O₄, and (Mg_0.68Al_0.32)(Al_0.84Mg_0.16)₂O₄. The conversion coating formed in the 0.01 mol/L aluminium nitrate solution for 15 min can improve the corrosion resistance of the magnesium alloy greatly. The discussion reveals that the possible formation mechanism for the aluminium-based conversion coating is the reduction reaction on micro-cathodic sites due to the electrochemically heterogeneous magnesium alloy substrate.     

铁酸钙粘结相自身强度的研究

以烧结矿中的铁酸钙粘结相为研究对象,考察了粘结相自身的抗折、抗压强度随粘结相组成的变化规律.实验考察了不同n(CaO)∶n(Fe2O3)(摩尔比)以及MgO,SiO2和Al2O3含量对铁酸钙粘结相的抗折、抗压强度的影响规律.结果表明,n(CaO):n(Fe2O3)=1∶2时,粘结相的抗折、抗压强度最高,添加MgO使粘结相抗折、抗压强度下降,适量的SiO2(w(SiO2)<3%)能提高粘结相的抗折、抗压强度,但随Al2O3含量的增加,粘结相的抗折、抗压强度下降.     

MgO对铁矿球团还原冶金性能的影响

研究考察了MgO对铁矿球团低温还原粉化率(RDI)、还原性(RI)以及还原膨胀率(RSI)等几种冶金性能的影响.结果表明:当MgO添加剂质量分数由0增加至2.0%时,铁矿球团的低温还原粉化率(RDI)和还原膨胀率(RSI)都逐渐下降,分别下降了6.46%与6.21%,还原粉化和还原膨胀现象得到抑制;同时,铁矿球团的还原性(RI)呈现逐渐上升趋势,升高了4.66%;故适量添加MgO有利于改善铁矿球团的冶金性能.通过分析配加MgO添加剂后铁矿球团的微孔情况及矿物组成的变化,研究解明了MgO对铁矿球团冶金性能的影响原因.     

分子印迹磁性荧光复合微球的制备及其性能研究

复杂生物体系中蛋白质的高效分离分析在生物分离、蛋白质纯化与检测等生命科学研究领域中具有重要的意义.本文以磁性荧光复合微球（Fe₃O₄MNP-ZnSQDs）为载体,利用表面印迹技术在Fe₃O₄MNP-ZnSQDs表面构建"核-壳"结构的磁性荧光蛋白印迹微球（Fe₃O₄MNP-ZnSQD@MIPs）,并用于溶菌酶蛋白的快速分离.结果表明,制备的Fe₃O₄MNP-ZnSQD@MIPs具有分散性好、粒径均一、荧光发射强、磁响应明显等特点.在最优条件下,该印迹微球在15 min达到吸附平衡,最大吸附容量可达645.76 m g· g-1,饱和磁强度为40 em u· g-1,且具有良好的选择性,印迹因子为2.15.该磁性荧光分子印迹微球成本低、耗时短、使用简单、吸附量高且选择性好,可用于大批量样品检测中溶菌酶的快速分离与纯化.      

Fe_2O_3/TiO_2复合纳米管阵列的制备及其可见光催化性能研究

在氟化铵-乙二醇体系中,采用阳极氧化法在铁基体上制备Fe_2O_3纳米管阵列,然后以氟钛酸铵为钛源,利用水热法在Fe_2O_3纳米管阵列上负载TiO_2纳米片,制得Fe_2O_3/TiO_2复合纳米管阵列,利用SEM、EDS、XRD、TEM、UV-Vis等手段,对所制Fe_2O_3/TiO_2纳米管阵列的表面形貌、物相结构及光催化性能进行表征,并分析Fe_2O_3/TiO_2纳米结构对亚甲基蓝的可见光降解能力。结果表明,Fe_2O_3/TiO_2复合纳米管阵列具有良好的可见光响应;NH_4F浓度为0.4%、水热反应3h制备的Fe_2O_3/TiO_2复合结构具有最佳的光催化性能,对亚甲基蓝的降解率可达90%。     

Interdiffusion in the Fe2O3-TiO2 system

Interdiffusion in the Fe₂O₃-TiO₂ system was investigated by the diffusion couple method in the temperature range of 1323 to 1473 K. The diffusion concentration curves of Ti⁴⁺ cations were obtained by electron probe microanalysis, according to which the Boltzmann-Matano method optimized by Broeder was used to calculate the interdiffusion coefficients. The interdiffusion coefficients almost increased linearly with the mole fraction of Ti⁴⁺ cations increasing, and they were in the range of 10^?12–10^?11cm²·s^?1. The increase of temperature could also lead to the increase of the interdiffusion coefficients at a constant concentration of Ti⁴⁺ cations. It was also found that the thickness growth of the diffusion layer obeyed the parabolic rate law.     

Microstructure and electrolysis behavior of self-healing Cu-Ni-Fe composite inert anodes for aluminum electrowinning

The microstructure evolution and electrolysis behavior of (Cu₅₂Ni₃₀Fe₁₈)-xNiFe₂O₄ (x=40wt%, 50wt%, 60wt%, and 70wt%) composite inert anodes for aluminum electrowinning were studied. NiFe₂O₄ was synthesized by solid-state reaction at 950℃. The dense anode blocks were prepared by ball-milling followed by sintering under a N₂ atmosphere. The phase evolution of the anodes after sintering was determined by scanning electron microscopy and energy-dispersive X-ray spectroscopy. The results indicate that a substitution reaction between Fe in the alloy phase and Ni in the oxide phase occurs during the sintering process. The samples were also examined as inert anodes for aluminum electrowinning in the low-temperature KF-NaF-AlF₃ molten electrolyte for 24 h. The cell voltage during electrolysis and the corrosion scale on the anodes were analyzed. The results confirm that the scale has a self-repairing function because of the synergistic reaction between the alloy phase with Fe added and the oxide phase. The estimated wear rate of the (Cu₅₂Ni₃₀Fe₁₈)-50NiFe₂O₄ composite anode is 2.02 cm·a-1.     

Effect of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> on the crystallization behavior of glass-ceramics produced from naturally cooled yellow phosphorus furnace slag

CaO-Al₂O₃-SiO₂ (CAS) glass-ceramics were prepared via a melting method using naturally cooled yellow phosphorus furnace slag as the main raw material. The effects of the addition of Fe₂O₃ on the crystallization behavior and properties of the prepared glass-ceramics were studied by differential thermal analysis, X-ray diffraction, and scanning electron microscopy. The crystallization activation energy was calculated using the modified Johnson-Mehl-Avrami equation. The results show that the intrinsic nucleating agent in the yellow phosphorus furnace slag could effectively promote the crystallization of CAS. The crystallization activation energy first increased and then decreased with increasing amount of added Fe₂O₃. At 4wt% of added Fe₂O₃, the crystallization activation energy reached a maximum of 676.374 kJ·mol-1. The type of the main crystalline phase did not change with the amount of added Fe₂O₃. The primary and secondary crystalline phases were identified as wollastonite (CaSiO₃) and hedenbergite (CaFe(Si₂O₆)), respectively.     

MgO对铁矿球团矿还原后强度的影响

在实验室条件下,研究了Mg O对铁矿球团还原后强度的影响.结果表明:当Mg O质熔剂质量分数由0增加至2.0%时,铁矿球团矿还原后强度得到提升;经还原后,铁矿球团矿的孔径和孔隙度都相应增大,但相比普通球团矿(Mg O质熔剂质量分数为0),含Mg O球团矿(Mg O质熔剂质量分数为2.0%)还原前、后孔径及孔隙度变化幅度相对较小,孔径分布相对集中;还原膨胀是决定铁矿球团矿还原后强度的主要因素;还原膨胀率越低,铁矿球团还原后的强度相对越大.     

Filter Paper-Derived Three-Dimensional Carbon Fibers Film Supported Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> as a Superior Binder-Free Anode Material for High Performance Lithium-Ion Batteries

Highly uniform and tight adhering of Fe₃O₄ particles on carbon fiber film (Fe₃O₄/CFF) is achieved through a simple in-situ thermal oxidation method. Particularly, 3D CFF with interconnected structure can shorten transfer path and buffer the volume expansion during charge-discharge cycling. Herein, the obtained Fe₃O₄/CFF anode exhibits a stable cycling performance and excellent high rate capability. The cell delivers a reversible capacity of 1 711 mAh·g^–1 at a current density of 100 mA·g^–1 after 100 cycles. Even at a high rate density of 2 A·g^–1, the specific capacity also can maintain 1 034 mAh·g^–1 after 100 cycles. The simplified fabrication is featured with low-cost and this binder-free perspective holds great potential in mass-production of high-performance metal oxide electrochemical devices.     

Reaction between sulfur dioxide and iron oxide cationic clusters

The reactivity of sulfur dioxide （SO2） molecules toward iron oxide cationic clusters （FemOn^＋） is studied by a homemade time-of-flight mass spectrometer coupled with a laser ablation/supersonic expansion cluster source and a fast flow reactor. The association products FemOnSO2^＋ can be observed for most of the clusters. The interesting result is that the cooperation effect of SO2 and water is in favor of the adsorption of gas phase water on specific scale iron oxide clusters （Fe2O2^＋ and Fe3O3^＋ ）. The reactivity information obtained may be useful to investigate atmospheric heterogeneous chemistry of related systems.     

Photodegradation of 17α-Ethynylestradiol in Aqueous Solution with Nitzschia hantzschiana or Chlorella vulgaris and Fe^3＋

0　IntroductionTherehasbeenincreasingconcernabouttheenvironmentaleffectsofoestrogensandxenoestrogens[1 ] .17α ethynylestradiol(EE2 ) (Fig .1)isasyntheticestrogenicsteroidthathastherapeuticuses (e.g .Oralcontraception) .Syntheticestrogensaregenerallymorestableinwaterthannaturalestrogensandhavegreaterpotency.Theyaredifficulttobeabsolutelyremovedfromwastewatersbyprimaryandsecondarytreatment.Thedegradationchemistryofthiscom poundhasnotbeenextensivelystudied .Therearefewpublishedarticlesstudying…