共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
3.
在MATLAB/Simulink环境下,针对子导弹武器系统,应用全弹道建模方法开发了包括运动学与动力学模块、制导与控制系统模块,弹目相对运动模块等组成的仿真系统数学模型,进行了全弹道数字仿真。仿真实验表明,该仿真系统较好的模拟了子导弹的飞行弹道,为子导弹武器系统的开发研制提供了必要的仿真工具。 相似文献
4.
先进短距起飞垂直着陆飞机的建模与仿真研究 总被引:1,自引:0,他引:1
先进短距起飞垂直着陆(ASTOVL)飞行/推进综合控制技术的实现,需要进行大量的理论研究和仿真计算,以确定最优控制律。通过用全量非线性方程来描述的该类依靠气动舵面和推力矢量融合控制技术的飞机运动状态,建立了六自由度的飞机动力学数学模型。由于没有对刚体飞机数学模型和气动数据进行线性化处理,因而所建模型不仅能较全面地反映STOVL飞机的实际运行特性,而且具有较强的通用性。最后,以某型号STOVL飞机为背景,在MATLAB5.2/Simulink环境下研究和开发了飞行数字传真器,介绍了仿真软件的设计思想和程序架构,并通过数字仿真验证了该仿真器的正确性。 相似文献
5.
6.
在倒立摆的控制研究试验过程中,在MATLAB环境下,以状态空间表达式形式建立倒立摆数学模型,采用MATLAB控制工具箱直接对倒立摆进行控制设计和仿真,之后在Simulink环境下建立倒立摆的控制仿真模型,将通过MATLAB控制工具箱设计的控制参数直接运用到Simulink仿真模型中,并通过代码生成工具RTW将模型下载到控制卡中进行倒立摆的实时控制试验.试验结果表明通过MATLAB设计平台,大大加快了倒立摆系统的建模、控制仿真设计和实现过程. 相似文献
7.
8.
9.
介绍了在MATLAB环境下构建一种新的系统辨识仿真工具箱(SIST:SystemIdentificationToolbox)的原理与实现,讨论了在MATLAB环境下工具箱的数据和算法结构形式,以及利用GUIDE完成图形界面的设计,用MATLAB与C 混编技术实现物理系统的I/O接口和系统辨识模型与算法、报告文件(report)和帮助文档等功能模块的编程。这种在MATLAB环境下开发的系统辨识仿真工具箱,具有功能丰富、可扩展性好、使用方便、操作直观等特点。还给出了实际使用例,证实工具箱的有效和可靠,可作为辨识研究和教学的辅助工具。 相似文献
10.
提出了采用流场数值模拟和弹道仿真相结合对导弹自控终点侧向散布进行计算的新方法.运用动网格技术更新由于导弹与载机发生相对运动而导致的计算域的变化,将整个流场的解与六自由度运动方程的解进行耦舍,模拟计算了9个工况下机弹分离时导弹所受气动干扰力、姿态角和位置,分析了发射条件对导弹气动力、姿态角和位置的影响,并将其作为导弹弹道仿真初始参数,仿真计算了导弹的自控终点侧向散布.结果表明该型导弹与载机分离时产生的气动干扰对导弹飞行自控终点侧向散布影响较小,从而验证了该型导弹的发射可靠性. 相似文献
11.
《系统工程理论与实践》2014,(5)
正August 10-14,2015Beijing,ChinaThe International Congress on Industrial and Applied Mathematics(ICIAM)is the premier international congress in the field of applied mathematics held every four years under the auspices of the International Council for Industrial and Applied Mathematics.From August 10 to 14,2015,mathematicians,scientists 相似文献
12.
13.
14.
《系统科学与系统工程学报(英文版)》2014,(2)
正AF:Any Field The School of Economics and Management at Tsinghua University(Tsinghua SEM)invites applications for faculty positions at all levels(Assistant Professor,Associate Professor and Full Professor)in any fields of business administration and management.Tsinghua SEM is the only school 相似文献
15.
16.
17.
《系统科学与系统工程学报(英文版)》2014,(4)
正June 22-24,2015Guangzhou,China http://iec.cnsba.com/index.htmlCo-Sponsored by:ffiEE SMC(pending)South China University of Technology The Chinese University of Hong Kong Tsinghua UniversityHosted bv:School of Business Administration,South China University of Technology,China Conference Co-Chairs: 相似文献
18.
19.
20.
The paper is about negotiating with issues that discourage innovation. The subject is environmental deterioration, with concern directed at the impediments that keep it from being innovatively resolved. The paper is organized around three issues. (1) The dominant model of environmental concern, called environmental protection, is managed predominantly via command and control approaches. (2) Command and control, by relying on analytical segmentation to subdivide the problem into digestible bits and using formal legislation to direct it, are not up to emerging challenges in the area. (3) More robust models are available but difficult to experiment with due to impediments that discourage change. These impediments are seen in ideals associated with protection, prevention, recycling, and sustainability that tend to do more to sustain harmful practices than to seek beneficial alternatives. Being able to appreciate the underlying restrictions of entropy could help stimulate a more innovative agenda. These issues are tested via a project funded by the EPA entitled ENERGY STAR Homes. 相似文献