Flexible organic light-emitting diodes with poly-3, 4-ethylenedioxythiophene as transparent anode

The flexible oragnic light-emitting diodes (OLEDs) fabricatedon poly-3, 4-ethylenedioxythiophene/polystyrenesulfonate (PEDOT/PSS) coated substrates were demonstrated. How the fabricating processes and the device structure will affect the device performance was studied and the atomic force microscopy was employed to analyze the mophorlogy of the conducting polymer anode. Under optimized conditions, flexible OLEDs with PEDOT anode showed the brightness up to 2760 cd/m² and maximum external quantum efficiency of 1.4%. These data are comparable to those of conventional flexible OLEDs with ITO anode.     

有机电致发光白光器件的研究

白光有机电致发光器件在显示领域有着极大的应用前景,受到人们广泛的关注.通过对白光有机电致发光器件的结构、工作原理、实验的可行性分析、工艺流程、存在的问题等方面进行了分析,对器件结构进行了优化设计,确定了合理的技术路线,提高白光电致发光器件中各成分的发光效率,从而得到了一种较为理想的有机白光电致发光器件.     

White organic light-emitting devices fabricated by spin-coating molecular materials

White organic light-emitting device (WOLEDs) employing molecular mixed host (MH) is demonstrated by spin-coating.The spin-coated film functions as light-emitting layer and hole transporting layer,with the former formed by spin-coating solution containing MH of NPB (N.N'-Bis(naphthalene-1-yl)-N,N'-bis(phenyl)-benzidine) and MADN (2-methyl-9,10-di(2-naphthyl) anthracene),blue dye (4,4'-bis[2-(4-(N,N-diphenylamino)phenyl)vinyl]biphenyl) and yellow dye (5,6,11,12-tetraphenylnaphacene).The performances of the de...     

单一白色发光层的OLED制备与发光性能研究

研制了两种类型单一白色发光层的有机电致发光器件(OLED),即小分子Zn(BTZ)2的掺杂型器件：ITO／PVK：TPD／Zn(BTZ)2：Rubrene／Al和聚合物LPPP的混合型器件：ITO／混合型发光层／Al,获得了较高的器件亮度和发光效率,且色坐标均非常接近于白色等能点,进而对上述器件的发光和电学性能进行了初步研究。     

有机发光器件的研究进展及应用前景(综述)

介绍了有机电致发光器件OLED（有机发光二极管）发展的历程，论述了有机电致发光材料及其发光原理和器件结构，讨论了该领域的研究热点问题，展望了OLED在新世纪的应用前景。     

Study on temperature characteristics of organic light-emitting diodes based on tris-（8-hydroxylquinoline）-aluminum

Both single-layer and double-layer organic light-emitting devices based on tris-（8-hydroxylquino- line）-aluminum （AIq3） as emitter are fabricated by thermal vacuum deposition. The electroluminescent characteristica of these devices at various temperatures are measured, and the temperature characteristics of device performance are studied. The effect of temperature on device current conduction regime is analyzed in detail. The results show that the current-voltage （I-V） characteristics of devices are in good agreement with the theoretical prediction of trapped charge limited current （TCLC）. In addition, both the charge carrier mobility and charge carrier concentration in the organic layer increase with the rise of temperature, which results in the monotonous increase of AIq3 device current. The current conduction mechanisms of two devices at different temperatures are identical, but the exponent m in current-voltage equation changes randomly with temperature. The device luminance increases slightly and the efficiency decreases monotonously due to the aging of AIq3 luminescent properties caused by high temperature. A tiny blue shift can be observed in the electroluminescent （EL） spectra as the temperature increases, and the reduction of device monochromaticity is caused by the intrinsic characteristics of organic semiconductor energy levels.     

Spectral variation of light-emitting diodes based on organic molecules doped polymer

Organic light-emitting diodes based on naphthylimine-gallium complexes doped into a PPV derivative have been fabricated by a spin coating method. Color variation from green to blue with increase of the applied voltage has been observed. And the electroluminescent intensity of the blend samples is much stronger than that of the samples containing the complexes only. The results have been attributed to the variation of the recombination zone and the charge transfer between the materials. The process of the charge transport has been analyzed in detail.     

Dependence of the stability of organic light-emitting diodes on driving mode

We investigated the effects of pulsed current (PC) and direct current (DC) driving modes on the stability of organic light-emitting diodes with and without hole-injection layers (HILs).Two different HIL materials were used:copper phthalocyanine (CuPc) and 4,4’,4″-tris(3-methylphenylphenylamino)triphenylamine (m-MDTATA).It was found that the half-lives of devices using PC driving modes were different from those of comparable devices using DC driving modes.For the devices without HILs,with CuPc HILs and with MTDATA HILs,the half-lives of the devices were changed by factors of 1.91,1.41 and 0.86,respectively,when operated in PC rather than DC driving modes.Our analysis of the electrical characteristics of the corresponding hole-only devices showed that the number of holes injected into devices was greatly reduced by inserting an m-MTDATA layer compared with other designs.The results indicate that different ratios of injected electrons and holes can be obtained in these devices.Moreover,these ratios play a dominant role in the dependence of the stability of the device on the driving mode.     

新型顶发射有机电致白光二极管的研究

为了提高顶发射白光有机发光二极管(top-emitting white organic light-emitting diodes,TWOLEDs)色谱稳定性,对一种拥有Ag反射镜的新型双蓝光发光单元顶发射器件展开研究,发现结构为Ag/Glass/ITO/MoO₃(5nm)/TAPC(30nm)/TCTA(5nm)/Firpic:TCTA(10%,20nm)/Firpic:TmPyPb(10%,10nm)TPBi(30nm)/LiF(1nm)/Al(0.8nm)/Ag(22nm)/Alq₃(50nm)的蓝光器件具有最佳光电性能,其最高电流效率可以达到9.76cd·A^-1。基于该结构,结合DCJTB荧光染料制备的颜色转换层实现顶发射白光器件。结果表明,当颜色转换层DCJTB浓度为2.5%时,获得了电流效率为2.45cd·A^-1,CIE色坐标为(0.338,0.337)以及显色指数CRI为72的TWOLEDs,器件微腔效应较弱且光谱随电流密度与观测角度改变仅有微弱变化。     

基于CLE方法的有机材料对柔性摆动双翼性能影响研究

基于CLE方法(相容拉格朗日-欧拉方法)研究柔性摆动双翼的具体性能.首先,根据已有的经典翼型实验,建立了翼型结构和周围流体的有限元模型,在结果对比中,证明了采用该方法和模型得到的计算结果比二维无黏理论的计算结果更加接近实验处理结果.在此基础上,研究了有机材料对柔性摆动双翼水动力性能及结构动力响应的影响.与刚性翼型不同,采用合适的有机材料制造翼型结构,既有利于改善柔性摆动双翼的水动力性能,也可以降低其内部应力.     

溶胶-凝胶法制备HEC/SiO2杂化材料的工艺研究

以羟乙基纤维素(HEC)、正硅酸乙酯(TEOS)为原料,采用溶胶-凝胶技术合成了HEC/SiO2有机-无机杂化材料.通过探讨水硅比、HEC含量、溶剂量、干燥控制化学添加剂用量、温度等工艺因素对凝胶化过程,特别是材料干燥体积收缩的影响,得出在本实验条件下合成HEC/SiO2有机-无机杂化材料的优化工艺条件.利用红外吸收光谱、紫外-可见光透射光谱以及扫描电子显微镜等测试手段对合成的HEC/SiO2有机-无机杂化材料进行表征.结果表明,HEC作为有机分散相已经均匀地分散到SiO2基相中,制备的HEC/SiO2有机-无机杂化材料透明,无分相,并可能形成了新的化学键.     

Transparent organic light-emitting diodes based on Cs<Subscript>2</Subscript>CO<Subscript>3</Subscript>:Ag/Ag composite cathode

The transparent organic light-emitting diodes (TOLEDs) based on Cs 2 CO 3:Ag/Ag composite cathode are reported in this paper.They show higher efficiency and better stability than the control devices with the Cs 2 CO 3 /Ag cathode.The devices are highly transparent,and show total efficiencies from both sides of the devices comparable with conventional bottom-emitting devices.The electroluminescence (EL) spectrum from the cathode side of the device is closer to the photoluminescence (PL) spectrum of the light...     

应用需求时间窗的柔性作业车间调度优化模型

为解决拉动式生产模式下准时交货给生产调度带来的困难,提出了一种基于需求时间窗的柔性作业车间调度问题优化方法。首先,根据工件的需求时间窗口,构建了一种以工件完工时间平均隶属度最大为目标函数的柔性作业车间调度问题优化模型。然后,针对模型提出并设计了一种基于多阶段混合变异的禁忌搜索算法。为增强算法收敛性,利用逆序变异和基因段交换变异找到较好的初解,在此基础上利用基因交换变异继续搜索优解。最后,通过在某多品种小批量生产车间的应用验证了该方法有效性。