1.5μm连续内腔单共振光学参量振荡器运转特性的实验研究

通过内腔单共振光学参量振荡器(SRO),获得了连续单频的1.5μm激光光源.实验采用PPLN晶体为非线性晶体,通过优化设计Nd:YVO4激光器的参数和SRO腔的参数,在LD泵浦功率为18W时,获得了300mW的连续单频1.5μm激光输出.实验与理论相结合,详细分析了SRO的运转特性,并提出了进一步优化SRO的方法.     

用连续波CO2激光对氮化硅陶瓷打孔的实验研究

报导用连续波ＣＯ２激光加工机对氮化硅陶瓷的激光打孔试验，获得了深径比达１８．７５的结果。     

二极管泵浦Nd:GdVO_4/PPLN连续波绿光激光器的研究

报道了一种二极管泵浦Nd:GdVO4晶体连续波激光器。采用简单、结构紧凑的平-平腔设计,在8W的注入功率下,获得3.1W的1.064μm近红外连续波激光输出,斜效率为45%。腔外放入PPLN晶体,当基波1.06μm连续波功率为3W时,得到了26mW连续波532nm单模绿光输出。     

不同工作模式下激光熔化沉积过程熔池演变数值研究

激光熔化沉积工艺中有连续波(continuous-wave,CW)和脉冲波(pulse-wave,PW)两种激光模式.基于Fluent针对熔池瞬态运动和传热传质建立了三维对称数值模型,通过求解VOF(volume of fluid)连续方程追踪沉积层自由表面,分析了不同激光工作模式下熔池的演变过程及上表面波动规律,对熔...     

二极管泵浦Nd:GdVO4/PPLN连续波绿光激光器的研究

报道了一种二极管泵浦Nd：GdVO4晶体连续波激光器。采用简单、结构紧凑的平-平腔设计,在8W的注入功率下,获得3.1w的1.064μm近红外连续波激光输出,斜效率为45％。腔外放入PPLN晶体,当基波1.06μm连续波功率为3W时,得到了26mW连续波532nm单模绿光输出。     

光纤耦合的LD泵浦微型固体激光器

本文报导了一种光纤耦合的ＬＤ泵浦微型Ｎｄ：ＹＡＧ固体激光器．该激光器为连续波输出，最大输出功率达３２．５ｍＷ，斜率效率为１３．９％．这种连续波输出的Ｎｄ：ＹＡＧ激光器，可作为实验室的激光源使用．     

SRO1 regulates heavy metal mercury stress response in Arabidopsis thaliana

Heavy metals in the environment are harmful limiting factors for the normal growth and development of plants. Here, we isolated and identified an Arabidopsis thaliana T-DNA insertion mutant, named srol-1, which showed a hyper-sensitive response to HgCl2. The SRO1 protein contains a WWE domain that mediates proteinprotein interactions. Under HgCl2 treatment, when compared with the wild-type plants, the growth of srol-1 was repressed dramatically and the number of true leaves was reduced and etiolated. The electrolyte leakage rates showed that cell membrane integrity in srol-1 was damaged more severely than in the wild type. DAB （3,5-diaminobenzidine） staining and confocal microscopy showed that Hg2＋ stress induced more hydrogen peroxide accumulation in srol-1 than in the wild type. The qRT-PCR results indicated that the expression of some abiotic stress-induced genes, such as L-ascorbate peroxidase （APX1）, was reduced under oxidative or Hg2＋ stress. Transgenic plants containing a GFP：：SRO1 fusion protein showed that SRO1 was localized in the nucleus of the cells. SRO1 was shown to be expressed in various tissues, and was most highly expressed in the vigorous tissues. Our results suggest thatSRO1 may play an important role in the stress response of A. thaliana to heavy metals.     

10.6μm 连续波激光对 MgF_2 材料的破坏效应

１０．６μｍ连续波激光对ＭｇＦ２材料的破坏效应漆海滨苏勇张正文邱占武（国防科技大学应用物理系长沙４１００７３）研究１０．６μｍ连续波激光辐照下ＭｇＦ２材料的破坏效应。将ＭｇＦ２晶体加工成圆形试件。试件直径５０ｍｍ，厚８ｍｍ；试件的表面为光学面。实验采...     

光纤耦合的LKD泵浦微型固体激光器

本文报导了一种光纤耦合的ＬＤ泵浦微型Ｎｄ：ＹＡＧ固体激光器，该激光器为连续波输出，最大输出功率达３２．５ｍＷ，斜率效率为１３．９％，这种连续波输出的Ｎｄ：ＹＡＧ激光器，可作为实验室的激光源使用。     

连续波化学氧碘激光器的发展及应用

简要阐述了连续波化学氧碘激光器的运转机理,介绍了它的发展过程和应用前景,并指出了今后发展的方向.     

非晶合金短程序研究与回火条件的选取

用核磁共振和穆斯堡尔效应配合研究了Ｆｅ８４Ｂ１０Ｃ６非晶合金的短程序。探讨了用回火非晶合金来研究短程序时的最佳热处理条件。结果表明，在淬态非晶合金中存在体心四方的Ｆｅ３Ｂ和正交型的Ｆｅ３Ｂ两种短程序。当用晶化方法来研究非晶合金的短程序时，推荐采用较低的回火温度（略高於非晶合金的晶化开始温度）和短的回火时间。     

初始端面跳动对制动器热-机耦合特性的影响

假设制动盘内、外盘面具有相同的2阶正弦函数特征的初始端面跳动,针对内外侧壁厚不等的通风盘式制动器,利用Msc-marc软件建立了瞬态热-机耦合动力学仿真模型.以制动盘盘面温度场、法向应力、翘曲及厚度变化的分布特性为评价指标,在紧急制动工况下,分析了初始端面跳动对制动器热-机耦合特性的影响.研究发现,初始端面跳动的方向和大小对制动器热-机耦合特性具有显著影响.     

基于Nd:YAG/V:YAG键合晶体的1338 nm微片激光器研究

基于Nd:YAG/V:YAG键合晶体,在连续和准连续LD端面泵浦条件下,研究了输出波长1 338 nm的被动调Q微片激光器的输出特性。在连续泵浦条件下,最大的输出功率为0.73 W,此时得到稳定的调Q脉冲输出,脉冲宽度为139 ns。在准连续泵浦下,获得了被动锁模调Q激光输出,输出的最大功率为1.01 W,对应的脉冲宽度为80 ns,其中的锁模系列单脉冲宽度约为70 ps。实验结果表明,Nd:YAG/V:YAG键合晶体有利于获得高功率紧凑的1 338 nm脉冲激光输出,同时准连续泵浦能有效地降低激光晶体的热效应从而获得更高功率的激光输出。     

Immune secondary response and clonal selection inspired optimizers

The immune system's ability to adapt its B-cells to new types of antigen is powered by processes known as clonal selection and affinity maturation. When the body is exposed to the same antigen, immune system usually calls for a more rapid and larger response to the antigen, where B cells have the function of negative adjustment. Based on the clonal selection theory and the dynamic process of immune response, two novel artificial immune system algorithms, secondary response clonal programming algorithm (SRCPA) and secondary response clonal multi-objective algorithm (SRCMOA), are presented for solving single and multi-objective optimization problems, respectively. Clonal selection operator (CSO) and secondary response operator (SRO) are the main operators of SRCPA and SRCMOA. Inspired by the clonal selection theory, CSO reproduces individuals and selects their improved maturated progenies after the affinity maturation process. SRO copies certain antibodies to a secondary pool, whose members do not participate in CSO, but these antibodies could be activated by some external stimulations. The update of the secondary pool pays more attention to maintain the population diversity. On one hand, decimal-string representation makes SRCPA more suitable for solving high-dimensional function optimization problems. Special mutation and recombination methods are adopted in SRCPA to simulate the somatic mutation and receptor editing process. Compared with some existing evolutionary algorithms, such as OGA/Q, IEA, IMCPA, BGA and AEA, SRCPA is shown to be able to solve complex optimization problems, such as high-dimensional function optimizations, with better performance. On the other hand, SRCMOA combines the Pareto-strength based fitness assignment strategy, CSO and SRO to solve multi-objective optimization problems. The performance comparison between SRCMOA, NSGA-II, SPEA, and PAES based on eight well-known test problems shows that SRCMOA has better performance in converging to approximate Pareto-optimal fronts with wide distributions.     

偶氮聚合物的热致非线性光学特性研究

利用z扫描技术研究了一种偶氮聚合物在连续激光作用下的热致非线性光学特性,并根据实验结果计算了偶氮聚合物的热光系数dn/dT和热致非线性折射率n2.由实验结果,发现样品的热光系数和热致非线性折射率与激发波长及样品在该波长下的线性吸收的强弱有关.     

缺失数据下非参数回归估计

在缺失响应变量的不完全数据下,利用局部线性回归的方法,给出了回归函数m(x)的估计的加权估计,并证明了估计量具有渐近正态性、均方误差(MSE)和相合性.模拟研究解释了估计量的有限样本性质,并得出了此估计量优越于完整数据估计和加权估计.     

高功率F-P腔掺Yb双包层光纤激光器的性能及效率

对高功率法布里-泊罗腔(F—P)掺Yb双包层光纤激光器进行理论和实验研究．通过推导光纤激光器速率方程，得到了光纤激光器输出功率、斜率效率和阈值泵浦功率的解析表达式．重点讨论了F-P腔腔镜反射率对光纤激光输出的影响．在实验中，利用D型双包层掺Yb光纤获得了输出功率10．6W，斜率效率86％的连续激光输出．理论分析与实验结果一致．     

连续气体激光器的自脉冲和混沌

对非旋波近似的Maxwell-Bloch方程进行数值求解。计算结果表明，逐渐增大反转粒子数密度，可以观察连续激光器的自脉冲和混沌。     

新型全光纤结构高功率双包层光纤激光器

通过对高功率双包层光纤激光器工作原理及其输出特性的分析,利用半导体激光器光纤模块作为泵浦源,采用星型双包层掺镱光纤与光纤光栅连接制作出全光纤结构的光纤激光器,获得了6.02 W单模连续输出功率,中心波长1 100 nm,斜效率1.7 W/A。