Fabrication and superconducting properties of nano-SiC doped MgB2 tapes

Nano-SiC doped MgB2 tapes were prepared by the in situ powder-in-tube method. Heat treatment was performed at 650℃ for 1 h. XRD data indicate that SiC particles had reacted with the MgB2 during sintering process. MgB2 core seemed to be denser after SiC doping, and the critical temperature was slightly depressed. The critical current density Jc of the SiC doped tapes was significantly enhanced in magnetic fields up to 14 T compared to the undoped ones. For the 5% SiC doped samples, Jc was in- creased by a factor of 32 at 4.2 K, 10 T. The enhancement of Jc-B properties in SiC doped MgB2 tapes is considered to be due to the enhancement of grain linkages and the introduction of effective flux pining centers. The substitution of B by C in MgB2 grains is thought to be the main reason for the improve- ment of the flux pinning ability in SiC doped MgB2 tapes.     

TiO2-based building materials: Above and beyond traditional applications

In the 1910s, TiO₂ began to be used in building materials as pigments and opacifier due to its excellent optical property. Since the photocatalytic property of TiO₂ was observed in 1972, its application field was expanded to air cleaning and sterilization. Thereafter, people added TiO₂ into building materials to develop novel and facile building materials. These materials were widely used for air cleaning, sterilization, self-cleaning, anti-fogging, decoration, and building cooling. The combination of building and other functions can serve simultaneously. Although TiO₂-based building materials have bright prospects, some aspects such as improving the stability and enhancing photoactive performance of the materials are of importance for future research. Supported by the National High Technology Research and Development Program (“863” Program) of China (Grant No. 2007AA061402), Chinese Key Technology Research and Development Program of the Eleventh Five-year Plan (Grant No. 2006BAJ02A08), Hangzhou Science & Technology Development Program (Grant No. 20061133B27) and Research Fund for the Doctoral Program of Higher Education (Grant No. 20070335197)     

Supercondcuting properties in MgB2／Fe wires prepared by PIT method

The discovery of superconductivity at 39 K in MgB2has attracted a lot of interest in the world[15]. Recently, many results on the magnetic and transport properties of bulks have been reported. And high critical currentdensities (Jc) in polycrystalline MgB2 materials indicate that Jc is not limited by the weak link of grain boundaries as high temperature superconductor (HTS), suggestingthat MgB2 has a good potential for electrical engineering applications[2,48]. The fabrication of high qua…     

Influence of O2/Ar ratio on the properties of transparent conductive niobium-doped ZnO films

Niobium-doped ZnO transparent conductive films are deposited on glass substrates by radio frequency sputtering at 300℃. The influence of O2/Ar ratio on the structural, electrical and optical properties of the as-deposited films is investigated by X-ray diffraction, Hall measurement and optical transmission spectroscopy. The lowest resistivity of 4.0×10^-4Ω· cm is obtained from the film deposited at the O2/Ar ratio of 1/12. The average optical transmittance of the films is over 90%.     

Styrene polymerization catalyzed by nickel complexes bearing hydroxyindanone-iminate ligands

Activated by methylaluminoxane, mononuclear bis（hydroxyindanone-iminate）nickel complexes Ni[ArN=CC2H3（CH3）C6H2（R）O]2 （Ar = 2,6-i-Pr2C6H3, R=Me（1）, R=CI（2）, and R=H（3）） showed good activity for the styrene polymerization. The effect of many reaction parameters including the AI/Ni ratio, temperature, and reaction time on catalytic activities of catalytic systems and the molecular weights of the obrained polystyrene was ascertained. The highest activity of 1.34×10^5g（PS）·mol^-1（Ni）·h^-1 was obtained under the optimum reaction condition. The ^13C NMR spectra of the polymers revealed that the polymer was isotactic-rich atactic polystyrene. And the coordination mechanism was confirmed by the analyses of the polymer chain end-groups.     

The uptake of ethyl iodide on black carbon surface

The importance of the iodine chemistry in the atmosphere has been demonstrated by recent obserations. The uptake of ethyl iodine on black carbon surface was inestigated at 298 K for the first time. Degussa FW2 （an amorphous black carbon comprising medium oxides） was used as black carbon sample. Black carbon surface was found to be deactiated in reaction with C2H51, and the uptake coefficient （r） was dependent on the time of exposure. The alue of （2.3±0.9）×10^-2 was determined for the initial uptake coefficient （No）. The result suggests that the heterogeneous loss of C2H51 on carbonaceous aerosols may be important under the atmospheric conditions.     

A novel Pd/silicalite-1 composite membrane for hydrogen separation

A novel Pd/silicalite-1 composite membrane supported on the macroporous tubular stainless steel substrate was successfully fabricated by electroless plating at 303 K. The structure, morphology and gaseous permeability of the membrane were detected by X-ray diffractiometry （XRD）, scanning electron microscopy （SEM） and single-gas permeation test, respectively. Results confirm the formation of a thin, smooth, and continuous Pd/silicalite-1 composite membrane. The obtained composite membrane shows a high H2 permeance of 1.15×10^-6 mol. m^-2. s^-1. Pa^-1 with moderate H2 selectivity of 250 for H2/N2 at 773 K, at 0.1 MPa pressure drop, suggesting the potential application for H2 separation.     

Dielectric properties of low dielectric constant Ba0.60Sr0.40Mg0.15Ti0.85O3-Mg2TiO4 composite thin films for tunable applications

Ba0.60Sr0.40Mg0.15Ti0.85O3-xmol%Mg2TiO4 （x = 0-40 mol%） （BSTM-MT） composite thin films were fabricated by sol-gel method. The precursor solution of these composite thin films was prepared through mixing the Ba0.80Sr0.40Mg0.15Ti0.85O3 and Mg2TiO4 solution. The microstructures and dielectric tunability of composite thin films were investigated. The dielectric constant of composite thin films can be tailored from 155 to 55 by changing the concentration of Mg2TiO4. The dielectric loss of these composite thin films were still kept below 0.01 and the tunability was above 20% at a dc-applied electric field of 500 kV/cm. Suitable dielectric constant, low dielectric loss, and high tunability of this kind of composite thin films can be useful for potential microwave tunable applications.     

Modified fiber qualities of the transgenic cotton expressing a silkworm fibroin gene

A silkworm gene for fibroin was introduced into the upland cotton WC line by Agrobacterium-mediated transformation. PCR detection for fibroin, nptII and gus genes, Kanamycin (Km)-resistance analysis and GUS-histochemical assay were conducted on 30 regenerated plants from 9 callus lines, and 17 positive plants were obtained by these 5 screening methods. By Km-resistance analysis and PCR for fibroin, 6 homozygous lines in T₃ were obtained. Southern blot and Northern bolt demonstrated that the fibroin gene was inserted into the genome of these 6 lines, stably inherited and expressed. Compared to the control, the surface structure of mature fiber in the 6 lines was significantly distorted and an increased number of convolution was observed by scanning electron microscopy (SEM). Fiber quality traits analysis indicated that fiber elongation of the 6 homozygous lines was all increased and fiber strength of 3 lines was enhanced. These results indicated that fibroin expression influenced cotton fiber structure and quality, suggesting that fibroin has great potential for improving cotton fiber quality by genetic engineering. Supported by National High Technology Research and Development Program of China (Grant No. 2006AA100105), Science & Technology Pillar Program of Jiangsu Province (Grant No. BE2008310) and Programme of Introducing Talents of Discipline to Universities (Grant No. B08025) Contributed equally to this work     

The short C-terminal hydrophilic domain of NhaH Na^＋/H^＋ antiporter from Halobacillus dabanensis with roles in resistance to salt and in pH sensing

The Na^＋/H^＋ antiporter plays key roles in maintaining low cytoplasmic NaNa^＋ level and pH homeostasis, while little is known about the Carboxyl-terminal hydrophilic tails of prokaryotic antiporters. In our previous study, the first Na^＋/H^＋ antiporter gene nhaH from moderate halophiles was cloned from Halobacillus dabanensis D-8 by functional complementation. A topological model suggested that only nine amino acid residues （^395PLIKKLGMI403） existed in the hydrophilic C-terminal domain of NhaH. The C-terminal truncated mutant of NhaH was constructed by PCR strategy and designated as nhaH△C. Salt tolerance experiment demonstrated that the deletion of hydrophilic C-terminal nine amino acid residues significantly inhibited the complementation ability of E. coil KNabc, in which three main Na^＋/H^＋ antiporters nhaA, nhaB and chaA were deleted. Everted membrane vesicles prepared from E. coil KNabc/nhaHAC decreased both Na^＋/H^＋ and Li^＋/H^＋ exchange activities of NhaH, and also resulted in an acidic shift of its pH profile for Na^＋, indicating a critical role of the short C-terminal domain of NhaH antiporter in alkali cation binding/translocation and pH sensing.     

Magnetoelectric and converse magnetoelectric res ponses in TbxDy1-xFe2-y alloy ＆ Pb（Mg1/3Nb2/3）（1-x）TixO3 crystal laminated composites

Measured results of magnetoelectric （ME） and converse magnetoelectric （CME） effects of TbxDy1-xFe2-y/ Pb（Mg1/3Nb2/3）（1-x）TixO3/TbxDy1-xFe2-y （TD/PMNT/TD） and PMNT/TD/PMNT laminated composites are presented. ME effect was determined by measuring laminate voltage output under a Helmholtz-generated AC field biased by a DC field （0-1 kOe） （1Oe = 79.58 A/m）. The CME effect was measured by recording the voltage induced in a solenoid encompassing the ME sample while exposed to a DC bias field and PMNT layer driven by a 10 V AC source. The ME and CME responses in the two laminated structure are linear. The highest values of ME coefficients in TD/PMNT/TD and PMNT/TD/PMNT composites are 384 mV/Oe and 158 mV/Oe, respectively, while the highest values of CME coefficients in the two composites are 118 mG/V and 162 mG/V （1 G=10^-4 T）, respectively.     

Performances improvement of eosin Y sensitized solar cells by modifying TiO2 electrode with silane-coupling reagent

Chemical fixing of xanthene dye （eosin Y） on the surface of TiO2 electrode was carried out by modifying the electrode with silane-coupling reagent to obtain stable dye-sensitized TiO2 electrode. Such silane modification can not only evidently enhance the stability of dye-sensitized TiO2 electrode but also improve the energy conversion efficiency of the assembled cells by increasing short-circuit photocurrent （Jsc） and open-circuit photovoltage （Voc）. It was found that the improvements of cell performances differ depending on the composition of the electrolyte. The optimum cell of the cell performance was achieved in the electrolyte with 0.5 mol/L TBAI/0.05 mol/L 12/EC：PC（3：1 w/w）, yielding Jsc of 4.69 mA. cm-2, Voc of 0,595 V, fill factor （FF） of 0.64 and ηof 1,78%, Different spectroscopic techniques including UV-Vis spectra, fluorescence spectra, EIS and dark current measurements were employed to derive reasonable analysis and explanations.     

Structural dependences of the <Emphasis Type="Italic">η</Emphasis><Superscript>6</Superscript> complexes of 3-amino-9-ethylcarbazole with chromium tricarbonyl fragment on third-order optical nonlinearities

Degenerate four-wave mixing measurements, using the 35 ps pulses at 532 nm, have been employed to investigate the third-order nonlinear optical parameters of two chromium tricarbonyl complexes η6-bonded to 3-amino-9-ethylcarbazole at either the NH2-substituted aryl ring （1） or the unsubstituted ring （2） and their precursor 3-amino-9-ethylcarbazole （AECz）. The second-order hyperpolarizability y of the compounds 1 and 2 were found to be 42.9×10^-31 and 35.9×10^-31 esu, respectively, approximately one order of magnitude greater than AECz. The relation between the molecular structure and second-order hyperpolarizability of the compounds I and 2 was explored in detail based on the three-level model and the density functional theory （DFT） calculation. The theoretical results indicate that the spatial distribution of electron density has the profound role in the third-order nonlinear optical properties.     

The synthesis and properties study of 6,13-diphenylpentacene

6,13-diphenylpentacene（DPP） was synthesized by 6,13-pentacenequinone and the Grignard reagent with the SnCl2/HCl as the reducing agent. It was detected by ^1H NMR, infrared spectra, X-ray diffraction （XRD）, UV-visible spectra and fluorescence spectra. Substitution with phenyl at the C-6 and C-13 positions of pentacene leads to phenomenal enhancement in solubility and a little enhancement in photooxidative stability. XRD results showed that the pattern of 6,13-diphenylpentacene was different from the patterns of pentacene and 6,13-pentacenequinone. UV-Visible spectra showed that the λmax of DPP in HCCl3 was 600 nm. The fluorescence spectra showed that DPP emitted purple （430 nm） and red （612 nm） when excited by UV, while only emitted red when excited by visible light. But it is still susceptible to photooxidation. The photooxidation product of DPP was also studied.     

Preparation of nano-compounded polyolefin materials through in situ polymerization technique: status quo and future prospects

Nano-compounding of polyolefins, an economical yet very effective route to high-performance polyolefin materials, has received considerable attention in recent years. Unlike most of the other polymers, polyolefins are chemically inert, which dictates that nano-compounding of polyolefins has to be conducted via in situ polymerization. In this review, a technological progress of the nano-compounding of polyolefins via in situ polymerization technique was summarized thoroughly, with emphasis laid on the current research status of polyolefin/montmorillonite (MMT) nanocomposites. A clear perspective for future researches on this specific family of materials was envisaged. Supported by National Natural Science Foundation of China (Grant No. 50373048) and State Key Development Program of Basic Research Program of Ministry of Science and Technology of China (Grant No. G2003CB615600)     

Human RBCs blood group conversion from A to O using a novel α-N-acetylgalactosaminidase of high specific activity

α-N-acetylgalactosaminidase （αNAGA） can convert group A human red blood cells （RBCs） to group O. One novel αNAGA gene was cloned by PCR from Elizabethkingia meningosepticum Isolated from a domestic clinical sample. Pure recombinant αNAGA was obtained by genetic engineering and protein purification with a calculated molecule of 49.6 kD. αNAGA was selective for terminal α-N-acetylgalacto- samine residue with a high specific activity, αNAGA could completely remove A antigens of 1 U （about 100 mL） group A1 or A2 RBCs in 1 h at pH 6.8 and 25℃ with s consumption of 1.5 or 0.4 mg recombinant enzyme. Enzyme-converted group A RBCs did not agglutinate after being mixed with monoclonal snti-A or sere of groups A, B, AB and O. Other blood group antigens except ABO had no change. FCM analysis showed that A antigens and A1 antigens disappeared while H antigens increased. It indicated that αNAGA successfully converted human blood group A RBCs to universally transfusable group O RBCs without the risk of ABO-incompaUble transfusion reactions. This αNAGA was suitable for producing universal RBCs to increase clinical transfusion safety, improve the RBCs supply, and to decrease transfusion cost and support transfusion service in case of emergency.     

Relaxor behavior of (1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 ceramics

n the present work, the phase transitions and relaxor behavior of (1−x)Pb(Mg_1/3Nb_2/3)O₃-xPbTiO₃ (PMN-PT, x = 0.2―0.4) ferroelectric ceramics have been investigated by means of X-ray diffraction, di-electric spectroscopy, the P-E hysteresis loop measurements and Raman scattering techniques. Structural analysis revealed that with the increase of PbTiO₃ content, PMN-PT ceramics experienced a gradual phase transition process from rhombohedral to tetragonal. It is usually believed that such kinds of phase transitions resulted in the linear decrease of relaxation degree. Surprisingly, our analy-sis of the dielectric spectra revealed that the indicator of the degree of diffuseness γ reached the maximum value near morphotropic phase boundary (MPB) (x = 0.32), then decreased with the further increase of PbTiO₃ content. The large dielectric relaxor feature near MPB may be attributed to the for-mation of ordered nanodomains, resulting from complex coexisting nanostructures. Further, the P-E hysteresis loop measurements and Raman analysis of the B-site cation order correlated well with the dielectric measurement results. It was found that the hysteresis loop squareness R_sq received the minimum value while the inverse of the value of full wide of half maximum (FWHM) of A_1g mode reached the maximum value at MPB composition, which showed similar trends to γ.     

Inhibition of DNA restrictive endonucleases and Taq DNA polymerase by trimalonic acid C60

Activities of trimalonic acid fullerene (TMA C_60) on DNA restrictive enzymatic reaction were investigated by using two restrictive endonucleases Hind III and EcoR I and plasmid pEGFP-N1 with single restric-tive site for both enzymes. Meanwhile, TMA C60 was also tested to clarify its effects on polymerase chain reaction (PCR) with the catalyst of Taq DNA polymerase and the template of plasmid pEGFP-N1. The products from restrictive reactions or PCR were detected by agarose gel electrophoresis. It was found that the product amounts from restrictive reactions or PCR decreased significantly with addition of TMA C60. The inhibition by TMA C60 was dose-dependent and IC50 values for reactions of Hind III, EcoR I and PCR were 16.3, 6.0 and 6.0 μmol/L, respectively. Addition of two scavengers of reactive oxygen species (ROS), L-ascorbic acid-2-phosphate ester magnesium and sodium azide at the con-centrations of 2―10 mmol/L did not antagonize the activities of TMA C60 against PCR and two restrictive reactions. However, increase of Taq DNA polymerase amounts in PCR system antagonized the activities of TMA C60. These data implied that TMA C60 was able to inhibit the activities of the three above-mentioned enzymes involved in DNA metabolism, and that this inhibition probably did not correlate to ROS.     

Comparison of the carbon isotope composition of total organic carbon and long-chain <Emphasis Type="Italic">n</Emphasis>-alkanes from surface soils in eastern China and their significance

Surface soil samples collected over a high spatial resolution in eastern China were analyzed for carbon isotope composition （δ^13C） of total organic carbon （TOC） and higher plant-derived long-chain n-alkanes, with the latter reported as weighted mean values. The two sets of δ^13C values are significantly correlated and show similar trends in spatial variation. The spatial distribution of δ^13C shows less negative values in the mid-latitudes between 31°N and 40°N and more negative ones at higher and lower latitudes. This is consistent with previously reported carbon isotope data from surface soil phytoliths in the same region and suggests that the mid-latitude area provides relatively favorable growing condi- tions for C4 plants. Furthermore, δ^13C values of both TOC and long-chain n-alkanes from 12 surface soil samples collected from a small grassland in north China displayed similar carbon isotope values and the difference between paired δ^13C of a soil samples remains relatively constant. Our data demonstrate that in eastern China, soil δ^13C composition of both TOC and long-chain n-alkanes is effective indicators of C3/C4 ratios of the prevailing vegetation. This work suggests that -22‰ and -32‰ are good es- timated end members for the weighted mean δ^13C values of long-chain n-alkanes （C27, C29 and C31 n-alkanes） from soils under dominant C4 or C3 vegetation, allowing us to reconstruct paleovegetation trends.     

A new type of longitudinally driven GMI effect of FeCo-based alloy

On investigating the longitudinally driven GMI effect of the DC annealed Fe36Co36Nb4Si4.8B19.2 alloy ribbon, the current density was 3.2×10^7 A/m^2, the GMI effect responds sensitively （the sensitivity is as high as 2440.2%/（A-m^-1）） to weak magnetic field after a 600-second annealing. The experimental result shows that the sensitivity is closely related to annealing current density, driven current frequency and eroded thickness. GMI effect, current annealing, sensitivity, magnetic domain structure