Numerical prediction of the incremental melting and solidification process

A mathematical formulation is applied to represent the phenomena in the incremental melting and solidification process (IMSP), and the temperature and electromagnetic fields and the depth of steel liquid phase are calculated by a finite difference technique using the control volume method. The result shows that the predicted values are in good agreement with the observations. In accordance with the calculated values for different kinds of materials and different size of molds, the technological parameter of the IMS process such as the power supply and the descending speed rate can be determined.     

Coating thickness control in continuously fabricating metallic glass-coated composite wires

A continuous production process was developed for coating bulk metallic glasses on the metallic wire surface. The effects of processing parameters, including the drawing velocity and coating temperature, on the coating thickness were investigated. It is found that the coating thickness increases with the increase in drawing velocity but decreases with the increase in coating temperature. A fluid mechanical model was developed to quantify the coating thickness under various processing conditions. By using this theoretical model, the coating thickness was calculated, and the calculated values are in good agreement with the experimental data.     

MATH-MODELLING OF ELECTROMAGNETICAL FLOW FIELD AND HEAT TRANSFER IN DC ELECTRIC-ARC FURNACE BATH

A mathematical formulation is developed to represent the magneticfield intensity, the current density, the velocity field, the temperature field in the DC arc furnace bath.The governing equations are solved numerically to describe the magnetic field intensity profiles, the current density profiles, Lorentz force profiles, streamline profiles, the velocity profiles and temperature profiles in the 30t DC-EAF bath. The theoretical predictions of temperature field are in good agreement with measurement in the 30t DC-EAF bath, and the recirculation rate of flow is also in good agreement with published estimation.     

First principle calculation of lithiation/delithiation voltage in Li-ion battery materials

A first principle method, based on the density functional theory, was used to investigate the average voltage of lithiation/delithiation for Li-ion battery materials across 7 categories and 18 series, including LiMO 2 , LiMn 2 O 4 , LiMPO 4 , Li 2 MSiO 4 and graphite. The average voltage of lithiation/delithiation in the relevant electrode materials was obtained by comparing the total-energy difference, before and after an electrochemical reaction. The calculated values were in good agreement with experimental data. The systematic difference between the simulated and experimental values could be explained in terms of the binding energy on the surface of the lithium electrode. This type of calculation method could be applied as an easy and effective tool for predicting the potential performance of new lithiation/delithiation materials.     

3-D Finite-Element Numerical Simulation of Centrifugal Induction Electrosalg Casting Solidification Process

A 3-D finite-element numerical simulation model of temperature field for CIESC casting solidification process was developed with the aid of ANSYS software and a series of corresponding experiments were made. The results showed that the good agreement was obtained between the numerical simulation and the experiments. Based on the numerical simulation results, the characteristics of temperature distribution in the castings during CIESC solidification process were analyzed and summarized. According to the G/R1/2 method and numerical simulation results, there is no any shrinkage defect in the CIESC casting and structure or casting is fine and compact.     

A new simulated annealing method of designing NMR biplanar shim coils

A new SA (simulated annealing) method is presented for the design of longitudinal shim coils for NMR (nuclear magnetic resonance) equipment. First, AGL (adaptive Gauss-Lobatto) quadrature used by the traditional SA method is analyzed. Two kinds of complete elliptic integrals are introduced to integrate the spatial magnetic field, which increases the computing speed by 13.3 times. Then, the system energy calculation is extended to the field of the z-axis. The results illustrate that the coil-set efficiency designed by the new SA method is 15% higher than that of the traditional one, and the field inhomogeneity is reduced from 1.20% to 0.49%. Finally, a prototype of coil assembly for NMR rock-core analyzer is built, and the experimental results are in good agreement with the theoretically calculated results.     

Pressure Dependence of Molar Volume near the Melting Point in Benzene

The pressure dependence of the molar volume was at constant temperatures close to the melting point in benzene. The molar volume of benzene was calculated using experimental data for the thermal expansivity for constant temperatures of 25℃, 28.5℃, 40℃, and 51℃ at various pressures for both the solid and liquid phases. The predictions are in good agreement with the observed volumes in both the solid and liquid phases of benzene. The predicted values of the molar volume for a constant temperature of 28.5℃ in the liquid phase of benzene agree well with experimental data in the literature.     

Comparison of Some Methods on Prediction of Activity Interaction Coefficient

Based on Miedema's semiempirical formation enthalpy model for binary alloys, free volume theory and a general solution model, a new model for prediction of activity interaction coefficient ε₁1 is proposed. The calculated results are better in agreement with the experimental values than the two previous models. The related theories and models are discussed according to the degree of agreement with experimental values.     

苯二元混合液中的超声速度计算

Ultrasonic velocity and density have been used to study the behaviour of a number of binary liquid mixtures by several workers. In this communication ultrasonic velocities in binary liquid mixtures of benzene have been calculated. The results have been compared with experimental values and good agreement has been found. Sound velocity C, molar volume V and excees molar volume V~E were obtained from the expressions     

Formula and 2-adic valuation of L(1) of elliptic curves with CM by -3

For the rational integers λ≡1, 3, or 5 (mod 6), considering elliptic curves y2＝x3-2433Dλ over the field (-3), the formula for the value at s=1 of Hecke L-series attached to such elliptic curves, expressed as a finite sum of values of Weierstrass -functions, is obtained. Moreover, when λ≡3 (mod 6), the lower bounds of 2-adic valuations of these values are also obtained. These results are consistent with the predictions of the conjecture of Birch and Swinnerton-Dyer in a sense, and have generalized and advanced some results in recent literature.     

Electrochemical performance of a nickel-rich LiNi<Subscript>0.6</Subscript>Co<Subscript>0.2</Subscript>Mn<Subscript>0.2</Subscript>O<Subscript>2</Subscript> cathode material for lithium-ion batteries under different cut-off voltages

A spherical-like Ni_0.6Co_0.2Mn_0.2(OH)₂ precursor was tuned homogeneously to synthesize LiNi_0.6Co_0.2Mn_0.2O₂ as a cathode material for lithium-ion batteries. The effects of calcination temperature on the crystal structure, morphology, and the electrochemical performance of the as-prepared LiNi_0.6Co_0.2Mn_0.2O₂ were investigated in detail. The as-prepared material was characterized by X-ray diffraction, scanning electron microscopy, laser particle size analysis, charge-discharge tests, and cyclic voltammetry measurements. The results show that the spherical-like LiNi_0.6Co_0.2Mn_0.2O₂ material obtained by calcination at 900℃ displayed the most significant layered structure among samples calcined at various temperatures, with a particle size of approximately 10 μm. It delivered an initial discharge capacity of 189.2 mAh·g-1 at 0.2C with a capacity retention of 94.0% after 100 cycles between 2.7 and 4.3 V. The as-prepared cathode material also exhibited good rate performance, with a discharge capacity of 119.6 mAh·g-1 at 5C. Furthermore, within the cut-off voltage ranges from 2.7 to 4.3, 4.4, and 4.5 V, the initial discharge capacities of the calcined samples were 170.7, 180.9, and 192.8 mAh·g-1, respectively, at a rate of 1C. The corresponding retentions were 86.8%, 80.3%, and 74.4% after 200 cycles, respectively.     

Decay dynamics of excited CS<Subscript>2</Subscript> and NH<Subscript>3</Subscript> investigated by femtosecond laser

By using the home-made femtosecond laser system and the time-of-flightmass spectrometer, the decay dynamics of excited carbon disulfide (CS2) and ammonia (NH3) are investigated in real time by pump-probe multiphoton ionization detection. The estimated lifetime constant of the NH3 state (514 fs) agreed quite well with the literature report. For the first time, the decay lifetime constants of the NH3 ′1A′1 state (93793 fs), the CS2 state (153 ± 10 fs), and the CS2 Rydberg state[2-3]6sσg(3Ⅱg)(948 ± 23 fs) are obtained.     

Electrochemical properties of LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.3</Subscript>Ti<Subscript>0.2</Subscript>O<Subscript>4</Subscript>/Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> cells

Spinel compounds LiNi_0.5Mn_1.3Ti_0.2O₄ (LNMTO) and Li₄Ti₅O₁₂ (LTO) were synthesized by different methods. The particle sizes of LNMTO and LTO are 0.5–2 and 0.5–0.8 μm, respectively. The LNMTO/LTO cell exhibits better electrochemical properties at both a low current rate of 0.2C and a high current rate of 1C. When the specific capacity was determined based on the mass of the LNMTO cathode, the LNMTO/LTO cell delivered 137 mA·h·g⁻¹ at 0.2C and 118.2 mA·h·g⁻¹ at 1C, and the corresponding capacity retentions after 30 cycles are 88.5% and 92.4%, respectively.     

Structural investigation and luminescent properties of BaZr(BO<Subscript>3</Subscript>)2:Eu<Superscript>3+</Superscript> phosphors containing Si

Si⁴⁺-doped BaZr(BO₃)₂:Eu³⁺ phosphors are prepared by a conventional solid-state reaction. The influence of Si⁴⁺ addition on the charge transfer state of Eu³⁺-O^2– and photoluminescence (PL) properties of BaZr(BO₃)₂:Eu³⁺ are discussed. Room temperature PL spectra indicated that efficient emission is obtained by Si doping. Increased values for the peak-peak ratio (PPR) of BaZr(BO₃)₂:Eu³⁺ at higher Si doping concentrations implied that the Eu³⁺ ion is located in a more asymmetric environment in BaZr_0.8Si_0.2(BO₃)₂:Eu³⁺ than in the undoped samples. The Judd-Ofelt parameters Ω_λ (λ=2,4) were calculated from the PL data, giving results that were consistent with those from the PPR. The maximum radiative quantum efficiency was achieved at a Si doping concentration of 20 mol%.     

Synthesis and modification of well-ordered layered cathode oxide LiNi<Subscript>2/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript>

Oxalic-acid-based co-precipitation method was employed to prepare LiNi_2/3Mn_1/3O₂ sample with a high-ordered structure. Li⁺, Ni²⁺ and Mn²⁺ acetates were used as starting materials. The influence of the amount of lithium source in the starting materials on Li⁺ content, disorder of Li⁺-Ni²⁺ ions, and electrochemical performance has been investigated. Rietveld refinement shows that the sample prepared with 20% excess Li-source in the starting materials exhibits a perfect ordered structure. A specific discharge capacity is as high as 172 mAh/g at C/20 in the voltage range of 4.35–2.7 V. However, the cyclability is not satisfactory: about 25.3% fade in capacity was observed over 50 cycles. Chemically stable SiO2 was coated on the surface of LiNi_2/3Mn_1/3O₂ particles. A significant improvement in cyclability was attained with 3 wt% SiO2 coating, which is ascribable to the protection of LiNi_2/3Mn_1/3O₂ particles from being dissolved into the electrolyte.     

Preparation and luminescence characteristics of Sr3SiO5：Eu^2＋ phosphor for white LED

The Sr3SiO5：Eu^2＋ phosphor was synthesized by high temperature solid-state reaction. The emission spectrum of Sr3SiO5：Eu^2＋ shows two bands centered at 487 and 575 nm, which well agree with the theoretic values of emission spectrum. The excitation spectrum for 575 nm emission center has several excitation bands at 365, 418, 458 and 473 nm. And the results show that the emission spectrum of Sr3SiO5：Eu^2＋ is influenced by the Eu^2＋ concentration. The relative emission spectra of the white-emitting InGaN-based YAG：Ce^3＋ LED and Sr3SiO5：Eu^2＋ LED were investigated. The results show that the color development of InGaN-based Sr3SiO5：Eu^2＋ is better than that of InGaN-based YAG：Ce^3＋, and the CIE chromaticity of InGaN-based Sr3SiO5：Eu^2＋ is （x=0.348, y=0.326）.     

Preparation and upconversion luminescence of YVO<Subscript>4</Subscript>:Er<Subscript>3+</Subscript>, Yb<Subscript>3+</Subscript>

YVO₄:Er³⁺, Yb³⁺ with varying Yb³⁺ concentrations were prepared by a precipitation method. The results of X-ray diffraction (XRD) show that all the samples have a tetragonal zircon structure; the calculated average crystallite sizes are in the range of 14–22 nm. The lattice constants and cell volume of the samples decrease slightly with the increase in Yb³⁺ concentration. The upconversion luminescence spectra of all the samples were studied under 980 nm laser excitation. The strong green emission is observed, which is attributed to the ²H_11/2 → ⁴I_15/2 and ⁴S_3/2→⁴I_15/2 transitions of Er³⁺, and the red emission peaks in 650–675 nm can be ignored. The emission intensity for the sample depends on the Yb³⁺ concentration. These results reveal that the upconversion processes of YVO₄:Er³⁺, Yb³⁺ are related to the structure and the doping Yb³⁺ concentration of the sample.     

Up-conversion luminescence of Er^3＋ doped and Er^3＋/Yb^3＋ co-doped YTaO4

The synthesis and up-conversion luminescent properties of YTaO4：Er^3＋ and YTaO4：Er^3＋/Yb^3＋ are reported for the first time. According to the measurement results of up-conversion spectra, Yb^3＋ co-doping can remarkably enhance the green （^2H11/2/^4S3/2→^4I15/2） and red （^4F9/2→^4I15/2） emissions, but depress the infrared emission （^4I9/2→^4I15/2）. With the increase of the Yb^3＋ concentration, the intensity of green emission increases, after that, when the Yb^3＋ concentration increases continuously, the intensity of green emission decreases, while those of the red and infrared emissions increase and decrease alternately. In addition, the up-conversion mechanisms of Er^3＋ doped and Er^3＋/Yb^3＋ co-doped YTaO4 are also discussed. It is found that the transform of up-conversion mechanism from two-step energy transfer to cooperating sensitization takes place when Yb^3＋ concentration is increased up to 12 mol%. With the further increase of Yb^3＋ concentration, the energy-back-transfer gradually becomes the dominant up-conversion mechanism, which results in the quenching of the green emission and slight increasing of the red and infrared emissions.     

Near-infrared to visible up-conversion emissions of Er^3＋ doped Al2O3 powders derived from the sol-gel method

The Er3 doped Al2O3 powders were prepared by the sol-gel method using the aluminium isopropoxide [Al(OC3H7)3]-derived Al2O3 sols with addition of the erbium nitrate [Er(NO3)3.5H2O]. The different phase structure, including three crystalline types of (Al,Er)2O3 phases, γ, θ, α, and two Er-Al-O phases, ErAlO3 and Al10Er6O24, was obtained with the 1 mol% Er3 doped Al2O3 powders at the different sintering temperatures of 600―1200℃. The green and red up-conversion emissions centered at about 523, 545 and 660 nm, corresponding respectively to the 2H11/2, 4S3/2→4I15/2 and 4F9/2→4I15/2 transitions of Er3 , were detected by a 978 nm semiconductor laser diodes excitation. The phase structure and OH content had evident influence on the up-conversion emissions intensity. The maximum intensities of both the green and red emissions were obtained respectively for the Er3 doped Al2O3 powders sintered at 1200 ℃, which was composed mainly of α-(Al,Er)2O3, less of ErAlO3 and Al10Er6O24 phases, and with the least OH content. The two-photon absorption up-conversion process was involved in the green and red up-conversion emissions of the Er3 doped Al2O3 powders.     

Photoluminescence and cathodoluminescence properties of a novel CaLaGa307：Dy3＋ phosphor

A single host white emitting phosphor, CaLaGa3O7:Dy3+, was synthesized by chemical co-precipitation. Field emission scanning electron microscopy, X-ray diffraction, laser particle size analysis, and photoluminescence and cathodoluminescence spectra were used to investigate the structural and optical properties of the phosphor. The phosphor particles were composed of microspheres with a slight tendency to agglomerate, and an average diameter was of about 1.0 μm. The Dy3+ ions acted as luminescent centers, and substituted La3+ ions in the single crystal lattice of CaLaGa3O7 where they were located in Cs sites. Under excitation with ultraviolet light and a low voltage electron beam, the CaLaGa3O7:Dy3+ phosphor exhibited the characteristic emission of Dy3+ (4F9/2-6H15/2 and 4F9/2-6H13/2 transitions) with intense yellow emission at about 573 nm. The chromaticity coordinates for the phosphor were in the white region. The relevant luminescence mechanisms of the phosphor are investigated. This phosphor may be applied in both field emission displays and white light-emitting diodes.