首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 234 毫秒
1.
Lanthanide methoxides supported by carbon-bridged bis(phenolate) ligands 2,2′-methylene-bis(6-tert- butyl-4-methylphenoxo) (MBMP2-) [(MBMP)Ln( μ-OMe)(THF)2]2 (Ln = Nd (1), Yb (2)) were synthesized in high yields by the protolysis reaction using (C5H5)3Ln(THF) as starting materials, and complex 1 was structurally characterized. The coordination geometry around the center metal can be best described as a distorted octahedron. Complexes 1 and 2 were shown to be efficient initiators for the ring-opening polymerization of 2,2-dimethyltrimethylene carbonate (DTC) and L-lactide. The mechanism of DTC polymerization was explored by the end group analysis of the oligomer.  相似文献   

2.
Nano-TiO2 particles with a range of crystallite sizes were synthesized by a conventional sol-gel method,and then used as nanoparticle substrates in the synthesis of LLDPE/TiO2 nanocomposites via in situ polymerization of ethylene/1-hexene with zirconocene/MMAO catalyst.It was found that the size of the nano-TiO2 crystallite nanoparticles can influence the catalytic activity in the polymerization system.The larger nano-TiO2 crystallites provided better catalytic activity in the polymerization system due to more space for monomer attack.In addition,by thermo-gravimetric analysis,it can be seen that the larger nano-TiO2 crystallites also exhibited lower interaction with available MMAO.Consequently,the MMAO reacted more efficiently with the zirconocene catalyst during the activation process,and enhanced polymerization catalysis.All the polymer nanocomposites products did not have well defined melting temperature indicating non-crystalline polymers.This is due to the high amount of hexene incorporation(based on 13C NMR).The difference in crystallite sizes of the nano-TiO2 also affected how 1-hexene became incorporated into the polymer nanocomposites.The smaller crystallite size of nano-TiO2 allowed greater 1-hexene incorporation due to depression of the reactivity of the ethylene.The contribution of this work helps develop a better understanding of the role of nano-TiO2 in the catalytic activity of the polymerization system and in the microstructure of the polymer composite product.However,this study only considers work on the laboratory scale,so for commercial application of these results,it is necessary to scale up the polymerization process.It is only at this stage,that other physical properties,such as the mechanical properties of these materials can be sensibly determined.  相似文献   

3.
1 Results Polypropylene polyol is very important chemical materials for polyurethane. We developed newly designed polypropylene polyol with terminated primary hydroxyl group. We focus on our new polypropylene polyol, and show its useful application for polyurethane foam. Polymerization of propyleneoxide is conventionally carried out in anionic polymerization process. In anionic process α-cleavage of propyleneoxide occurs rather than β-cleavage. Then the terminal hydroxyl group of the resulting polypropyleneoxide is almost all the secondary alcohol (ca. 98%). We found that Tris(pentafuluorophenyl) boron has high activity as catalyst for polymerization of propyleneoxide. The polymerization of propyleneoxide under Tris(pentafuluorophenyl) boron catalyst is mainly controlled to be α-cleavage (c.a.70%) because of its bulky substituent shown in Fig. 1.  相似文献   

4.
1 Results Great progresses have been made in the field of transition metal-based complexes as catalytic precursors for olefin oligomerization and polymerization,in which the core subjects will remain as "know and how" to develop novel catalysts both in academic and industrial consideration.The key advantage of iron and cobalt catalyst for ethylene polymerization is to produce vinyl-type polyethylenes.Therefore following the pioneering works of bis(imino) pyridyl iron and cobalt catalyst by Brookhart[1] and Gibson[2] in 1998,there have been many contributions toward their derivatives' complexes for the investigation of their catalytic behaviors.However,there are few examples successful good activity catalysts based upon new designed ligands such as monoiminopyridines[3],2-imino-1,10-phenanthrolines[4],2-benzimidazolylpyridines[5],2-quinoxalinyl-6-imino pyridines[6] and bimetallic complex[7].Those catalysts performed good to high catalytic activities towards ethylene oligomerization and polymerization,meanwhile most of them were first contributed with our efforts inspired by bis(imino)pyridyl metal catalyst.Herein we will present our results with designing pathways,and academic and industrial considerations.  相似文献   

5.
Four lanthanum alkoxides stabilized by a carbon-bridged bis(phenolate) ligand were synthesized and their catalytic behavior for the ring-opening polymerization of L-lactide was explored. Reactions of [(MBMP)LaCp(THF) 2 ] (MBMP 2 = 2,2′-methylene-bis(6-tert-butyl-4-methyl phenoxo)) with HOCH 2 Ph, HOCH 2 CF 3 , HOCH(CH 3 ) 2 , and HOCH 2 CH 2 N(CH 3 ) 2 , respectively, in a 1:1 molar ratio in THF gave the dimeric lanthanum alkoxo complexes [(MBMP)Ln(μ-OR)(THF) 2 ] 2 (OR = OCH 2 Ph(1), OCH 2 CF 3 (2), OCH(CH 3 ) 2 (3), OCH 2 CH 2 N(CH 3 ) 2 (4)]. These complexes were well characterized, and the definitive molecular structure of complex 1 was determined. It was found that complexes 1 to 4 are efficient initiators for the ring-opening polymerization of L-lactide. The structure of the alkoxo groups has a significant effect on the catalytic behavior, and complex 2 can initiate L-lactide polymerization in a controlled manner.  相似文献   

6.
1 Results Despite rapid progress in the development of resistive-type humidity sensors, the detection of low humidity is still a problem[1, 2]. In this study, poly(4-vinylpyridine) was crosslinked and quaternized with 1,4-bromobutane to form a polyelectrolyte humidity sensitive film on interdigitated gold electrodes, which was further coated with a layer of polypyrrole by a facile method of vapor phase polymerization process. The composite so prepared was characterized by UV-vis spectroscopy and scanning electron microscopy. It was found that the impedance of the composite changed linearly with humidity in the range of 0~60%RH with good sensitivity. In addition, it exhibited a fast response (t90%: ≈33 s and ≈110 s for adsorption and desorption, respectively) and a relative small hysteresis (≈5%RH). The effect of concentration and ratio of oxidizing agent and dopingagent, temperature of vapor phase polymerization of pyrrole on the humidity sensitive properties of the composite have been investigated. The sensitive mechanism of the composite was also explored. The composite of conducting PPy and polyelectrolyte has great potential as a candidate sensitive material forlow humidity detection.  相似文献   

7.
The catalysts of copper oxide supported on cerium dioxide were prepared by different methods for methane catalytic combustion. The effects of copper content in the catalysts and calcination temperatures of the catalysts on the catalytic activity are investigated. Results show that the complex oxide catalyst exhibits high catalytic activity for methane combustion due to the synergistic effect of CuO and CeO2. The catalyst prepared by impregnation is more active than that prepared by controlled coprecipitation even if CuO content is the same. When W(CuO)<13%, the light-off temperature and full conversion temperature for the CH4 reaction decrease with the increasing of CuO content in the catalysts. However, when the copper content is above 13%, the excess CuO has a negative effect on the catalytic activity owing to the formation of bulk CuO particles. A proper calcinations temperature of 650 ℃ can lead to a high dispersion of CuO and accordingly can enhance the catalytic activity of the composites.  相似文献   

8.
Poly(2-diethylaminoethyl methacrylate) (PDEAEMA)-coated multiwalled carbon nanotubes (MWNT-PDEAEMA) were successfully prepared by MWNT-surface initiated atom transfer radical polymerization (ATRP). The obtained MWNT-PDEAEMA nanocylinders have a core of MWNT and a shell of PDEAEMA and this core-shell structure was confirmed by TEM observations. The UV-Vis and AFM measurements showed that the MWNT-PDEAEMA exhibited obvious pH sensitivity. The solubility of PDEAEMA-coated MWNT dramatically decreased when pH increased to ca. 7.0. Because of the giant molecular weight of the molecular hybrids and local high density of polymeric grafts linked onto MWNTs, the resulting MWNT-PDEAEMA nanocomposites are easier to aggregate, or more sensitive to pH, as compared with the neat PDEAEMA.  相似文献   

9.
A thiourea precursor was employed to synthesize mesoporous carbon nitride(C3 N4) by a thermal polycondensation process with high surface area SiO2 and nanosphere SiO2 as two types of hard templates. The resultant mesoporous C3 N4 samples have high surface areas(105–112 m2/g) and mesopores with narrow sizes distribution(9.3 nm). Photocatalytic performance was evaluated by removal of NO in air under visible light irradiation. The results showed that mesoporous C3 N4 samples exhibited significantly improved photocatalytic activity in comparison with bulk C3 N4, which also exceeded that of N-doped TiO2 and C-doped TiO2. The activity enhancement can be ascribed to the synergistic effects of large surface area and pore volume, enhanced light-harvesting ability, increased redox potential, and reduced recombination of charge carriers. In addition to the high activity, the mesoporous C3 N4 samples also showed high photochemical stability. The mesoporous C3 N4 photocatalysts with enhanced and durable activity could provide a new efficient material for environmental pollution control.  相似文献   

10.
The synthesis and characterization of a novel trinuclear diphosphinoamine ligand 2 are reported. The ligand combined with Cr(III), activated with methylaluminoxane, lead to highly active and long-lifetime catalytic systems for the tetramerization of ethylene to form 1-octene. The effects of reaction temperature, reaction pressure, molar ratio of Al/Cr and bis(diphenylphosphino)amine/Cr on the catalytic activity and product selectivity were studied. Compared with its mononuclear analogue 1, ligand 2 showed a higher catalytic activity and longer lifetime for ethylene tetramerization in the presence of methylaluminoxane as cocatalyst. High molecular weight polyethylene was generated as a by-product with extremely broad molecular weight distributions.  相似文献   

11.
(R)- and(S)-2-Allyl-1,3,2-dinaphtho (α,β) [d.f] dioxaborepin ((R)-2 and(S)-2) have been first prepared by the reaction of(R)-(+)- or(S)-(−)-1, 1′-bi-2-naphthol and triallylborane in THF at room temperature, respectively.(S)-2 and(R)-2 are sensitive to moisture and oxygen in air and disproportionate easily to triallylborane and 1,1′-bi-2 naphthyl bis (1,1′-bi-2-naphtholborate) at ambient temperature. However, THF is a stabilizer for them. The reactions of(R)-2 or(S)-2 and some aliphetic or aromatic aldehydes in CH2Cl2 at −78°C for several hours afforded β-alkylenyl alcohols in up to 84.8%ee. Among them, optically active 1-(3, 5-dichlorophenyl)-3-butenol and 1-(2-methoxyphenyl)-3-butenol were first prepared Foundation item: Supported by the National Natural Science Foundation of China (29972033) Biography: Liu Dejun (1973), male, Ph. D, research direction: asymmetric synthesis  相似文献   

12.
1 Introduction In recent years, studies on biological effects of thenanoscale materials have become the cornerstone of rapidly developed nanomedical and nanobiological technologies. Moreover, studies on the bio-effects when the different kinds of nanoscal…  相似文献   

13.
The bis(β-diketonato) Zr complexes CpZr(acac)2Cl (acac = acetylacetonato) (1) and Cp*Zr(acac)2Cl (2) can be synthesized by the reac-tion of Cp′ZrCl3(Cp′ = Cp or Cp*) with 2 equiv of lith-ium acetylacetonate. CpZr(acac)2Cl (1) can be quan-titatively prepared by treatment of Cp2ZrCl2 with ex-cess acetylacetone. The tris(β-diketonato) Zr com-plex CpZr(tfac)3 (tfac = trisfluoroacetylacetonato) (3) has been prepared by treatment of CpZrCl3 with so-dium trisfluoroacetylacetonate. The replacement of both chlorine atoms and one Cp group from zir-conocene dichloride by nonfluorinated diketone,acetylacetone,readily occurs at room temperature in triethylamine medium,offering the tris(β-diketonato) Zr complex CpZr(acac)3 (4). The complexes were characterized by 1H NMR spectroscopic methods. In addition,the molecular structures of complexes 3 and 4 have been determined by X-ray diffraction methods. When activated by excess methylaluminoxane (MAO),these complexes were active for ethylene polymerization,offering polyethylenes with high mo-lecular weights and narrow molecular weight distribu-tions. Complex 4 showed a very high ethylene po-lymerization activity of up to 7100 kg PE/mol Zr·h at 5 atm. Complexes 1 and 2 were also active for ethyl-ene/1-hexene copolymerization.  相似文献   

14.
A new kind of polymethyl methacrylate (PMMA)-TiO2 nanocomposite was synthesized through polymerization. The thermal and photic stability of this PMMA TiO2 nanocomposites were investigated. The as prepared samples were characterized by scanning electron microscopy (SEM), UV-Vis spectroscopy, differential thermal analysis (DTA) and the photo-induced weight loss, The results show that the photostability of the PMMA-TiO2 nanocomposite is higher than that of the pure PMMA under UV-light irradiation, The weight loss of the pure PMMA reaches 30 % after 300 h UVirradiation, while the composite only 0.3% under the identical experimental condition. The glass transition temperature (TR) of pure PMMA is only 80℃, while the Tg of the composite reaches 258℃. Compared with pure PMMA, the thermal stability of the composite is greatly enhanced.  相似文献   

15.
实验探究了二硫化钼(MoS2)作为一种新型材料与贵金属纳米粒子金(Au)、铂(Pt)的复合基底对于过氧化氢(H2O2)的还原性检测,采用氧化铟锡导电玻璃(ITO)作为电极,制备出了基于Pt-Au-MoS2-ITO的生物传感器,为H2O2还原性检测的便携性操作打下了基础.实验采用电化学沉积的方法制备材料,同时使用循环伏安(CV)法、计时电流法等传统电化学手段表征了传感器电化学性能,采用场发射扫描电子显微镜(FE-SEM)来表征传感器表面形貌.建立了用于H2O2还原检测的、具有高检测限、高灵敏度和宽检测范围的传感器.  相似文献   

16.
Oxidationisaubiquitousphenomenonofnature.Theeconomiclossduetooxidationisverylargeeveryyear.Theinvestigationoftheadsorptionofoxygenonthesur-facesofmetalsisofgreatimportanceforbetterunder-standingoftheoxidationmechanismbecauseitistheverybeginningstageofoxidationofmetals.Itisgenerallybe-lievedthattheprocessofO2adsorptiononmetalsisinanorderofO2?O?O-?O2-,andthefollowingstagesareoxidenucleation,growthandtheoxidefilmformation.Astheprocessofadsorptionistooquicktobeobservedbyexperiments,atheoreticals…  相似文献   

17.
Early transition metal catalysts containing twophenoxy-imine ligands, called FI catalysts which havevery high potential to become a new generation of olefinpolymerization catalysts, are new-type catalysts whichhave attracted much attention in recent years[1—3]. Many ofthem display activities comparable to those of the metal-locene catalysts and, in some cases, behave as living po-lymerization catalysts of α-olefins. Brookhart and Gibsonet al.[4,5] recently reported separately series of Schi…  相似文献   

18.
The light-oxidation degradation processes of Zn(dmid)(phen)2(dmid = 4, 5-dimercapto-1,3-dithiole-2 one, phen = 1,10-phenanthroaline) in pyridine solvent has been monitored, h has been found under the light, dmid^2- of Zn(dmid)(phen)2 in pyridine solution could generate NCS^- and NCS^-replaces dmid^2- to form Zn(NCS)2 (phen)2 simultaneously. The crystal structure of Zn(NCS)2 (phen)2 has been determined. In the crystal of Zn(NCS)2 (phen)2. two NCS^- ligands are arranged in syn-configuration, and there is strong π-π interaction between the two adjacent parallel phen.  相似文献   

19.
The synthesis and characterization of dimeric rare-earth amides stabilized by a dianionic N-aryloxo functionalized ,8-ketoiminate ligand are described. Reactions of 4-(2-hydroxy-5-methyl-phenyl) imino-2-pentanone (LH2) with Ln[N(SiMe3)2]3(μ-Cl)Li(THF)3 in a 1:1 molar ratio in THF gave the dimeric rare-earth amido complexes [LLn{N(SiMe3)2}(THF)]2 [Ln = Nd (1), Sm (2), Yb (3), Y (4)]. These complexes were well characterized, and the definitive molecular structures of complexes 3 and 4 were determined. It was found that complexes 1-4 can initiate the ring-opening polymerization of ε-caprolactone, and the ionic radii of the central metals have significant effect on the catalytic activity.  相似文献   

20.
以无水乙醇和冰乙酸为溶剂,Co(NO3)2·6H2O,(1,3 二(4-吡啶基)丙烷(bpp)和(NH4)6[Mo7O24]·4H2O为反应物,在150℃下进行溶剂热反应,合成了新的无机-有机杂化材料Mo8O26(H2bpp)2。采用单晶X-射线衍射法测定晶体结构,通过紫外-可见-近红外反射光谱表征了晶体性能。研究表明,合成产物属单斜晶系,空间群P21/c,晶胞参数a=10.938(2),b=9.7351(19),c=19.649(4),β=101.74(3)° ,V=2048.5(7)A° 3;晶体结构由无机的[Mo8O264-n链和有机的(H2bpp)2+离子靠静电力和氢键堆积而成;此无机-有机杂化材料对紫外光具有较强的吸收,且有一定的质子导电能力。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号