Removal of phospho-head groups of membrane lipids immobilizes voltage sensors of K+ channels

A fundamental question about the gating mechanism of voltage-activated K+ (Kv) channels is how five positively charged voltage-sensing residues in the fourth transmembrane segment are energetically stabilized, because they operate in a low-dielectric cell membrane. The simplest solution would be to pair them with negative charges. However, too few negatively charged channel residues are positioned for such a role. Recent studies suggest that some of the channel's positively charged residues are exposed to cell membrane phospholipids and interact with their head groups. A key question nevertheless remains: is the phospho-head of membrane lipids necessary for the proper function of the voltage sensor itself? Here we show that a given type of Kv channel may interact with several species of phospholipid and that enzymatic removal of their phospho-head creates an insuperable energy barrier for the positively charged voltage sensor to move through the initial gating step(s), thus immobilizing it, and also raises the energy barrier for the downstream step(s).     

X-ray structure of a voltage-dependent K+ channel

Voltage-dependent K+ channels are members of the family of voltage-dependent cation (K+, Na+ and Ca2+) channels that open and allow ion conduction in response to changes in cell membrane voltage. This form of gating underlies the generation of nerve and muscle action potentials, among other processes. Here we present the structure of KvAP, a voltage-dependent K+ channel from Aeropyrum pernix. We have determined a crystal structure of the full-length channel at a resolution of 3.2 A, and of the isolated voltage-sensor domain at 1.9 A, both in complex with monoclonal Fab fragments. The channel contains a central ion-conduction pore surrounded by voltage sensors, which form what we call 'voltage-sensor paddles'-hydrophobic, cationic, helix-turn-helix structures on the channel's outer perimeter. Flexible hinges suggest that the voltage-sensor paddles move in response to membrane voltage changes, carrying their positive charge across the membrane.     

Voltage-sensing residues in the S4 region of a mammalian K+ channel

The ability of ion-channel proteins to respond to a change of the transmembrane voltage is one of the basic mechanisms underlying electrical excitability of nerve and muscle membranes. The voltage sensor has been postulated to be the fourth putative transmembrane segment (S4) of voltage-activated Na+, Ca2+ and K+ channels. Mutations of positively charged residues within S4 alter gating of Na and Shaker-type K+ channels, but quantitative correlations between the charge or a residue in S4 and the gating valence of the channel have not yet been established. Here, with improved resolution of the voltage dependence of steady-state activation, we present estimates of the equivalent gating valence with sufficient precision to allow quantitative examination of the contribution of individual charged residues to the gating valence of a mammalian non-inactivating K+ channel. We conclude that at least part of the gating charge associated with channel activation is indeed contributed by charged residues within the S4 segment.     

Atomic structure of a voltage-dependent K+ channel in a lipid membrane-like environment

Voltage-dependent K+ (Kv) channels repolarize the action potential in neurons and muscle. This type of channel is gated directly by membrane voltage through protein domains known as voltage sensors, which are molecular voltmeters that read the membrane voltage and regulate the pore. Here we describe the structure of a chimaeric voltage-dependent K+ channel, which we call the 'paddle-chimaera channel', in which the voltage-sensor paddle has been transferred from Kv2.1 to Kv1.2. Crystallized in complex with lipids, the complete structure at 2.4 ?ngstr?m resolution reveals the pore and voltage sensors embedded in a membrane-like arrangement of lipid molecules. The detailed structure, which can be compared directly to a large body of functional data, explains charge stabilization within the membrane and suggests a mechanism for voltage-sensor movements and pore gating.     

The principle of gating charge movement in a voltage-dependent K+ channel

The steep dependence of channel opening on membrane voltage allows voltage-dependent K+ channels to turn on almost like a switch. Opening is driven by the movement of gating charges that originate from arginine residues on helical S4 segments of the protein. Each S4 segment forms half of a 'voltage-sensor paddle' on the channel's outer perimeter. Here we show that the voltage-sensor paddles are positioned inside the membrane, near the intracellular surface, when the channel is closed, and that the paddles move a large distance across the membrane from inside to outside when the channel opens. KvAP channels were reconstituted into planar lipid membranes and studied using monoclonal Fab fragments, a voltage-sensor toxin, and avidin binding to tethered biotin. Our findings lead us to conclude that the voltage-sensor paddles operate somewhat like hydrophobic cations attached to levers, enabling the membrane electric field to open and close the pore.     

Small vertical movement of a K+ channel voltage sensor measured with luminescence energy transfer

Voltage-gated ion channels open and close in response to voltage changes across electrically excitable cell membranes. Voltage-gated potassium (Kv) channels are homotetramers with each subunit constructed from six transmembrane segments, S1-S6 (ref. 2). The voltage-sensing domain (segments S1-S4) contains charged arginine residues on S4 that move across the membrane electric field, modulating channel open probability. Understanding the physical movements of this voltage sensor is of fundamental importance and is the subject of controversy. Recently, the crystal structure of the KvAP channel motivated an unconventional 'paddle model' of S4 charge movement, indicating that the segments S3b and S4 might move as a unit through the lipid bilayer with a large (15-20-A) transmembrane displacement. Here we show that the voltage-sensor segments do not undergo significant transmembrane translation. We tested the movement of these segments in functional Shaker K+ channels by using luminescence resonance energy transfer to measure distances between the voltage sensors and a pore-bound scorpion toxin. Our results are consistent with a 2-A vertical displacement of S4, not the large excursion predicted by the paddle model. This small movement supports an alternative model in which the protein shapes the electric field profile, focusing it across a narrow region of S4 (ref. 6).     

Functional analysis of an archaebacterial voltage-dependent K+ channel

All living organisms use ion channels to regulate the transport of ions across cellular membranes. Certain ion channels are classed as voltage-dependent because they have a voltage-sensing structure that induces their pores to open in response to changes in the cell membrane voltage. Until recently, the voltage-dependent K+, Ca2+ and Na+ channels were regarded as a unique development of eukaryotic cells, adapted to accomplish specialized electrical signalling, as exemplified in neurons. Here we present the functional characterization of a voltage-dependent K+ (K(V)) channel from a hyperthermophilic archaebacterium from an oceanic thermal vent. This channel possesses all the functional attributes of classical neuronal K(V) channels. The conservation of function reflects structural conservation in the voltage sensor as revealed by specific, high-affinity interactions with tarantula venom toxins, which evolved to inhibit eukaryotic K(V) channels.     

A voltage-gated proton-selective channel lacking the pore domain

Voltage changes across the cell membrane control the gating of many cation-selective ion channels. Conserved from bacteria to humans, the voltage-gated-ligand superfamily of ion channels are encoded as polypeptide chains of six transmembrane-spanning segments (S1-S6). S1-S4 functions as a self-contained voltage-sensing domain (VSD), in essence a positively charged lever that moves in response to voltage changes. The VSD 'ligand' transmits force via a linker to the S5-S6 pore domain 'receptor', thereby opening or closing the channel. The ascidian VSD protein Ci-VSP gates a phosphatase activity rather than a channel pore, indicating that VSDs function independently of ion channels. Here we describe a mammalian VSD protein (H(V)1) that lacks a discernible pore domain but is sufficient for expression of a voltage-sensitive proton-selective ion channel activity. H(v)1 currents are activated at depolarizing voltages, sensitive to the transmembrane pH gradient, H+-selective, and Zn2+-sensitive. Mutagenesis of H(v)1 identified three arginine residues in S4 that regulate channel gating and two histidine residues that are required for extracellular inhibition of H(v)1 by Zn2+. H(v)1 is expressed in immune tissues and manifests the characteristic properties of native proton conductances (G(vH+)). In phagocytic leukocytes, G(vH+) are required to support the oxidative burst that underlies microbial killing by the innate immune system. The data presented here identify H(v)1 as a long-sought voltage-gated H+ channel and establish H(v)1 as the founding member of a family of mammalian VSD proteins.     

Electron microscopic analysis of KvAP voltage-dependent K+ channels in an open conformation

Voltage-dependent ion channels serve as field-effect transistors by opening a gate in response to membrane voltage changes. The gate's response to voltage is mediated by voltage sensors, which are arginine-containing structures that must move with respect to the membrane electric field. We have analysed by electron microscopy a voltage-dependent K(+) channel from Aeropyrum pernix (KvAP). Fab fragments were attached to 'voltage sensor paddles' and identified in the electron microscopy map at 10.5 A resolution. The extracellular surface location of the Fab fragments in the map is consistent with the membrane-depolarized, open conformation of the channel in electrophysiological experiments. Comparison of the map with a crystal structure demonstrates that the voltage sensor paddles are 'up' (that is, near the channel's extracellular surface) and situated at the protein-lipid interface. This finding supports the hypothesis that in response to changes in voltage the sensors move at the protein-lipid interface rather than in a gating pore surrounded by protein.     

Spectroscopic mapping of voltage sensor movement in the Shaker potassium channel

Voltage-gated ion channels underlie the generation of action potentials and trigger neurosecretion and muscle contraction. These channels consist of an inner pore-forming domain, which contains the ion permeation pathway and elements of its gates, together with four voltage-sensing domains, which regulate the gates. To understand the mechanism of voltage sensing it is necessary to define the structure and motion of the S4 segment, the portion of each voltage-sensing domain that moves charged residues across the membrane in response to voltage change. We have addressed this problem by using fluorescence resonance energy transfer as a spectroscopic ruler to determine distances between S4s in the Shaker K+ channel in different gating states. Here we provide evidence consistent with S4 being a tilted helix that twists during activation. We propose that helical twist contributes to the movement of charged side chains across the membrane electric field and that it is involved in coupling voltage sensing to gating.     

Putative receptor for the cytoplasmic inactivation gate in the Shaker K+ channel

Inactivation of ion channels is important in the control of membrane excitability. For example, delayed-rectifier K+ channels, which regulate action potential repolarization, are inactivated only slowly, whereas A-type K+ channels, which affect action potential duration and firing frequency, have both fast and slow inactivation. Fast inactivation of Na+ and K+ channels may result from the blocking of the permeation pathway by a positively charged cytoplasmic gate such as the one encoded by the first 20 amino acids of the Shaker B (ShB) K+ channel. We report here that mutation of five highly conserved residues between the proposed membrane-spanning segments S4 and S5 (also termed H4) of ShB affects the stability of the inactivated state and alters channel conductance. One such mutation stabilizes the inactivated state of ShB as well as the inactivated state induced in the delayed-rectifier type K+ channel drk1 by the cytoplasmic application of the ShB N-terminal peptide. The S4-S5 loop, therefore, probably forms part of a receptor for the inactivation gate and lies near the channel's permeation pathway.     

Atomic scale movement of the voltage-sensing region in a potassium channel measured via spectroscopy

Voltage-gated ion channels are transmembrane proteins that are essential for nerve impulses and regulate ion flow across cell membranes in response to changes in membrane potential. They are made up of four homologous domains or subunits, each of which contains six transmembrane segments. Studies of potassium channels have shown that the second (S2) and fourth (S4) segments contain several charged residues, which sense changes in voltage and form part of the voltage sensor. Although these regions clearly undergo conformational changes in response to voltage, little is known about the nature of these changes because voltage-dependent distance changes have not been measured. Here we use lanthanide-based resonance energy transfer to measure distances between Shaker potassium channel subunits at specific residues. Voltage-dependent distance changes of up to 3.2 A were measured at several sites near the S4 segment. These movements directly correlated with electrical measurements of the voltage sensor, establishing the link between physical changes and electrical charge movement. Measured distance changes suggest that the region associated with the S4 segment undergoes a rotation and possible tilt, rather than a large transmembrane movement, in response to voltage. These results demonstrate the first in situ measurement of atomic scale movement in a trans-membrane protein.     

Crystal structure of the CorA Mg2+ transporter

The magnesium ion, Mg2+, is essential for myriad biochemical processes and remains the only major biological ion whose transport mechanisms remain unknown. The CorA family of magnesium transporters is the primary Mg2+ uptake system of most prokaryotes and a functional homologue of the eukaryotic mitochondrial magnesium transporter. Here we determine crystal structures of the full-length Thermotoga maritima CorA in an apparent closed state and its isolated cytoplasmic domain at 3.9 A and 1.85 A resolution, respectively. The transporter is a funnel-shaped homopentamer with two transmembrane helices per monomer. The channel is formed by an inner group of five helices and putatively gated by bulky hydrophobic residues. The large cytoplasmic domain forms a funnel whose wide mouth points into the cell and whose walls are formed by five long helices that are extensions of the transmembrane helices. The cytoplasmic neck of the pore is surrounded, on the outside of the funnel, by a ring of highly conserved positively charged residues. Two negatively charged helices in the cytoplasmic domain extend back towards the membrane on the outside of the funnel and abut the ring of positive charge. An apparent Mg2+ ion was bound between monomers at a conserved site in the cytoplasmic domain, suggesting a mechanism to link gating of the pore to the intracellular concentration of Mg2+.     

Control of topology and mode of assembly of a polytopic membrane protein by positively charged residues

Positively charged amino acids have been shown to be important elements in targeting-peptides that direct proteins into mitochondria, nuclei, and the secretory pathways of both prokaryotic and eukaryotic cells. The 'positive-inside' rule, which observes that regions of polytopic (multi-spanning) membrane proteins facing the cytoplasm are generally enriched in arginyl and lysyl residues whereas translocated regions are largely devoid of these residues, implies that the distribution of positively charged amino acids may also be a major determinant of the transmembrane topology of integral membrane proteins. If this is indeed the case, it should be possible to predictably alter the topology of a polytopic protein by site-directed insertions and/or deletions of positively charged residues in critical locations. I now describe a derivative of Escherichia coli leader peptidase, a polytopic inner-membrane protein, that switches from sec-gene-dependent membrane insertion with a Nout-Cout transmembrane topology to sec-gene-independent insertion with a Nin-Cin topology in response to the addition of four positively charged lysines to its N terminus.     

Portability of paddle motif function and pharmacology in voltage sensors

Voltage-sensing domains enable membrane proteins to sense and react to changes in membrane voltage. Although identifiable S1-S4 voltage-sensing domains are found in an array of conventional ion channels and in other membrane proteins that lack pore domains, the extent to which their voltage-sensing mechanisms are conserved is unknown. Here we show that the voltage-sensor paddle, a motif composed of S3b and S4 helices, can drive channel opening with membrane depolarization when transplanted from an archaebacterial voltage-activated potassium channel (KvAP) or voltage-sensing domain proteins (Hv1 and Ci-VSP) into eukaryotic voltage-activated potassium channels. Tarantula toxins that partition into membranes can interact with these paddle motifs at the protein-lipid interface and similarly perturb voltage-sensor activation in both ion channels and proteins with a voltage-sensing domain. Our results show that paddle motifs are modular, that their functions are conserved in voltage sensors, and that they move in the relatively unconstrained environment of the lipid membrane. The widespread targeting of voltage-sensor paddles by toxins demonstrates that this modular structural motif is an important pharmacological target.     

A proton pore in a potassium channel voltage sensor reveals a focused electric field

Voltage-dependent potassium channels are essential for the generation of nerve impulses. Voltage sensitivity is conferred by charged residues located mainly in the fourth transmembrane segment (S4) of each of the four identical subunits that make up the channel. These charged segments relocate when the potential difference across the membrane changes, controlling the ability of the pore to conduct ions. In the crystal structure of the Aeropyrum pernix potassium channel KvAP, the S4 and part of the third (S3B) transmembrane alpha-helices are connected by a hairpin turn in an arrangement termed the 'voltage-sensor paddle'. This structure was proposed to move through the lipid bilayer during channel activation, transporting positive charges across a large fraction of the membrane. Here we show that replacing the first S4 arginine by histidine in the Shaker potassium channel creates a proton pore when the cell is hyperpolarized. Formation of this pore does not support the paddle model, as protons would not have access to a lipid-buried histidine. We conclude that, at hyperpolarized potentials, water and protons from the internal and external solutions must be separated by a narrow barrier in the channel protein that focuses the electric field to a small voltage-sensitive region.     

Stereospecific binding of a disordered peptide segment mediates BK channel inactivation

A number of functionally important actions of proteins are mediated by short, intrinsically disordered peptide segments, but the molecular interactions that allow disordered domains to mediate their effects remain a topic of active investigation. Many K+ channel proteins, after initial channel opening, show a time-dependent reduction in current flux, termed 'inactivation', which involves movement of mobile cytosolic peptide segments (approximately 20-30 residues) into a position that physically occludes ion permeation. Peptide segments that produce inactivation show little amino-acid identity and tolerate appreciable mutational substitutions without disrupting the inactivation process. Solution nuclear magnetic resonance of several isolated inactivation domains reveals substantial conformational heterogeneity with only minimal tendency to ordered structures. Channel inactivation mechanisms may therefore help us to decipher how intrinsically disordered regions mediate functional effects. Whereas many aspects of inactivation of voltage-dependent K+ channels (Kv) can be described by a simple one-step occlusion mechanism, inactivation of the voltage-dependent large-conductance Ca2+-gated K+ (BK) channel mediated by peptide segments of auxiliary β-subunits involves two distinguishable kinetic steps. Here we show that two-step inactivation mediated by an intrinsically disordered BK β-subunit peptide involves a stereospecific binding interaction that precedes blockade. In contrast, blocking mediated by a Shaker Kv inactivation peptide is consistent with direct, simple occlusion by a hydrophobic segment without substantial steric requirement. The results indicate that two distinct types of molecular interaction between disordered peptide segments and their binding sites produce qualitatively similar functions.     

Stabilization of charges on isolated ionic groups sequestered in proteins by polarized peptide units

Electrostatic interactions are of considerable importance in protein structure and function, and in a variety of cellular and biochemical processes. Here we report three similar findings from highly refined atomic structures of periplasmic binding proteins. Hydrogen bonds, acting primarily through backbone peptide units, are mainly responsible for the involvement of the positively charged arginine 151 residue in the ligand site of the arabinose-binding protein, for the association between teh sulphate-binding protein and the completely buried sulphate dianion, and for the formation of the complex of the leucine/isoleucine/valine-binding protein with the leucine zwitterion. We propose a general mechanism in which the isolated charges on the various buried, desolvated ionic groups are stabilized by the polarized peptide units. This mechanism also has broad application to processes requiring binding of uncompensated ions and charged ligands and stabilization of enzyme reaction charged intermediates, as well as activation of catalytic residues.     

Gating pore current in an inherited ion channelopathy

Ion channelopathies are inherited diseases in which alterations in control of ion conductance through the central pore of ion channels impair cell function, leading to periodic paralysis, cardiac arrhythmia, renal failure, epilepsy, migraine and ataxia. Here we show that, in contrast with this well-established paradigm, three mutations in gating-charge-carrying arginine residues in an S4 segment that cause hypokalaemic periodic paralysis induce a hyperpolarization-activated cationic leak through the voltage sensor of the skeletal muscle Na(V)1.4 channel. This 'gating pore current' is active at the resting membrane potential and closed by depolarizations that activate the voltage sensor. It has similar permeability to Na+, K+ and Cs+, but the organic monovalent cations tetraethylammonium and N-methyl-D-glucamine are much less permeant. The inorganic divalent cations Ba2+, Ca2+ and Zn2+ are not detectably permeant and block the gating pore at millimolar concentrations. Our results reveal gating pore current in naturally occurring disease mutations of an ion channel and show a clear correlation between mutations that cause gating pore current and hypokalaemic periodic paralysis. This gain-of-function gating pore current would contribute in an important way to the dominantly inherited membrane depolarization, action potential failure, flaccid paralysis and cytopathology that are characteristic of hypokalaemic periodic paralysis. A survey of other ion channelopathies reveals numerous examples of mutations that would be expected to cause gating pore current, raising the possibility of a broader impact of gating pore current in ion channelopathies.     

Structure of the C2 domain of human factor VIII at 1.5 A resolution

Human factor VIII is a plasma glycoprotein that has a critical role in blood coagulation. Factor VIII circulates as a complex with von Willebrand factor. After cleavage by thrombin, factor VIIIa associates with factor IXa at the surface of activated platelets or endothelial cells. This complex activates factor X (refs 6, 7), which in turn converts prothrombin to thrombin in the presence of factor Va (refs 8, 9). The carboxyl-terminal C2 domain of factor VIII contains sites that are essential for its binding to von Willebrand factor and to negatively charged phospholipid surfaces. Here we report the structure of human factor VIII C2 domain at 1.5 A resolution. The structure reveals a beta-sandwich core, from which two beta-turns and a loop display a group of solvent-exposed hydrophobic residues. Behind the hydrophobic surface lies a ring of positively charged residues. This motif suggests a mechanism for membrane binding involving both hydrophobic and electrostatic interactions. The structure explains, in part, mutations in the C2 region of factor VIII that lead to bleeding disorders in haemophilia A.