LiF用作阴极注入层的有机发光二极管制备

使用真空热蒸发方法,制备了结构为ITO/TPD/Alq3/LiF/Al的有机发光二极管,其中LiF用作阴极注入层,LiF超薄层的加入,增强了电子注入,降低了启亮电压,提高了器件的发光效率和亮度. 实验结果表明:当加入LiF层的厚度为0.5 nm时,器件性能的改善最好,和不含LiF的器件相比,启亮电压由原来的9 V降低到5 V,效率由1.5 cd/A增加到3.3 cd/A,提高了近1倍,然而随着加入LiF层厚度的增加,器件性能的改善效果降低.     

The effect of multi-quantum barrier structure on light-emitting diodes performance by a non-isothermal model

A multi-quantum barrier structure is employed as the electron blocking layer of light-emitting diodes to enhance their performance.Using the non-isothermal multi-physics-field coupling model,the internal quantum efficiency,internal heat source characteristics,spectrum characteristics,and photoelectric conversion efficiency of light-emitting diodes are analyzed systematically.The simulation results show that:introducing multi-quantum barrier electron blocking layer structure significantly increases the internal quantum efficiency and photoelectric conversion efficiency of light-emitting diodes and the intensity of spectrum,and strongly ensures the thermal and light output stability of light-emitting diodes.These results are attributed to the modified energy band diagrams of the electron blocking layer which are responsible for the decreased electron leakage and enhanced carrier concentration in the active region.     

Spectroscopic study on the photophysical properties of chlorine substituted tetraphenylporphyrin-histidine and its zinc(Ⅱ)complexes

As the structural analogues of (bacterio)chlorophylls in photosynthetic organisms, porphyrins play an important role in building up artificial photosynthetic systems[13]. In natural photosynthetic pigment-protein complexes,certain amino acid residuals modulate the reactions ofcharge transfer and energy transfer via coordination andother types of interactions with chlorophyll molecules.For instance, in higher-plant photosynthetic reaction cen-ter PSⅡ, the oxidization-reduction system consistin…     

Calculation of non－mono chromatic reflectance of Co／Sb multilayer

It is well known that the structure defects, such as the interfacial roughness, interdiffusion and chemical reaction at interface, can degrade the optical properties for soft X-ray multilayer[1—5]. For example, the interfacial rough-ness can lead to a loss of spectral reflectance, which has been investigated for many years, and number theories for the scattering of electromagnetic radiation by interfacial roughness have been formulated[6,7]. In addition, the fluc-tuation of the period can als…     

Efficient polymer light-emitting diodes with violet blue emission based on blends of PSiF6-PPP and PSiFC6C6

Efficient polymer light-emitting diodes (PLEDs) with violet blue emission were fabricated using blends of copolymers of paraphenylene-co-silafluorene (PSiF6-PPP) and polymer of poly (9,9'-alkyl-3,6-silafluorene) (PSiFC6C6). The performances of the devices are sensitive to the blend ratio. When the mass ratio of PSiF6-PPP to PSiFC6C6 is 1 : 3, the highest external quantum efficiency is 1.96% at luminance of 105 cd.m2, its electroluminescent (EL) spectrum peaks at 398 nm and full width at half maximum is 67 nm. The improvements of the device performances were due to the energy transfer from PSiFC6C6 to PSiF6-PPP and the balanced injection of electrons and holes.     

Flexible organic light-emitting diodes with ITO／Ag／ITO multi-layers as anodes

The transparent ITO/Ag/ITO multi-layers are developed as anodes on flexible PET (poly(ethylene terephthalate)) substrates. The influence of these anodes on FOLED (Flexible Organic Light-emitting Diodes) is investigated. From the results of research, it can be seen that the multi-layer anode has optimum characteristics, whose sheetresistance is 11 Ω and optical transmittance is about 80%,when the thickness of Ag sandwiched by two ITO layers is in the range of 14--18 nm. It is demonstrated that the OLED devices with multi-layer anodes give better luminescence and higher efficiency compared with those with single ITO anodes.     

Stress corrosion cracking and its anisotropy of a PZT ferroelectric ceramics

It is known that some types of ceramics, like Al2O3 and ZrO2, undergo stress corrosion cracking (SCC) or static fatigue fracture under static loading, ever in a rela-tively mild environment, such as moist atmosphere or water at room temperature, which leads to a time-dependent fracture[1—4]. For a transmission electron microscopy specimen of YBa2Cu3O7-x ceramics superconductor, SCC induced by residual stress can occur in an atmosphere with low moisture content[5]. For a lead zirconate ti…     

Aligning DNA on Si surface and cutting off by tips of atomic force microscope

DNA is a kind of promising molecule as nano-lead to build or connect nano-devices due to its stable linear structure and certain conductivity. Many methods have been applied to constructing nano-patterns by using DNA molecule. In this report it is presented that λ-DNA was aligned on Si substrate by using the free-flowing method and then imaged by an atomic force microscope (AFM). After the second liquid flow, a catenary-like pattern and a crossed network of λ-DNA were formed. In addition, the aligned λ-DNA was successfully cut off by tips of AFM.     

Dating of sediment-hosted disseminated-type gold deposit by using ~(40)Ar/~(39)Ar laser probe: A case study of Changkeng large-scale gold deposit, China

Ore-forming age is one of the most important data in studying the genesis of mineral deposits. Dating of sedi-ment-hosted disseminated-type gold deposits, which areone of the most important types of gold deposits in theworld, is always a difficult task for ore geologists. Themajor reason is that most of the ores in this type deposit are of various siliceous and are composed of extremely fine-grained minerals, thus it will be very difficult to de-termine their ages by using conventional isotopi…