Application of Grey Associative Analysis to the Assessment of Regional Water Security

The assessment of water security is an important content in the security management of water resources due to the fact that the state of water security directly affects both the sustainable development of regional economy and the improvement on the living quality of mankind．Grey associative analysis is introduced and applied to assessment of water security on the basis of grey characteristics of the assessment index system of water security．As a case study shows,grey associative analysis is used for evaluating water security of some provinces in China,and the satisfactory assessment results are obtained．The sequence of provinces in China with regard to water security from good to poor is obtained and,moreover,the water security level of each region is also confirmed．The results obtained accord with the actual state of each region．They are of practical significance and can be used to guide the management of regional water security and a sustainable development of the economy therein．At the same time,the results demonstrate that grey associative analysis provides a new method for assessing water security quantitatively but needs a further study．     

Development of Auto Sheets in Baosteel

The development trends of auto sheets in recent years are summarized with regard to the envirorunental regulations, market demands and strategy of the steel industry. The growth of domestic auto industry and demands for auto sheets are also briefed. The current status of development of Bake hardenable steel, Isotropic steel for outer panels and Transformation induced plasticity steel, dual phase steel for structural parts in Baosteel is introduced and the future of auto sheets in Baosteel is forecasted.     

Mobility and constant-orientation workspace analysis of 4UPS-UPU parallel mechanism

One of the key issues for parallel mechanism is the kinematic characteristics, especially the workspace which varies with configuration parameters. A kind of 4UPS-UPU parallel mechanism is designed and its workspace is studied in this paper. First, the mobility of the 4UPS-UPU parallel mechanism is analyzed based on the reciprocal screw theory, and the motion and constraint screw systems of the parallel mechanism are obtained. Then the inverse kinematics is derived by the closed-form kinematics chain. The boundary search method in the polar coordinate system is presented to analyze the constant-orientation workspace of the parallel mechanism. Finally, the influence factors relevant to the workspace, such as the structural parameters and kinematics parameters are analyzed in detail. The relationship between the workspace volume and different parameters are obtained. The conclusions can be used for parameters optimization and path planning of the parallel mechanism.     

Urban Transport and Sustainable Transport Strategies： A Case Study of Karachi, Pakistan

The uncontrolled growth in urbanization and motorization generally contributes to an urban land use and transportation system that is socially, economically, and environmentally unsustainable. This paper uses Karachi as a case study, which is the largest urban and economic centre of Pakistan, passing through an uncontrolled phase of rapid urbanization and motorization. The paper first reviews research related to sustainable transportation systems to comprehend the concept of sustainable development and transporta-tion. The paper then evaluates the existing transportation and infrastructure system, national transportation policies, and urban transportation projects to determine if the current paradigm is moving toward or away from sustainable transportation. Furthermore, the principles for sustainable urban transportation are devel-oped to see what significance national transportation policies have given to urban transportation from a sus-tainable transportation point of view. Finally some strategies are suggested, adoption of which may lead to a sustainable urban development and transportation system in Karachi.     

Materials and sustainable development

Sustainable development is a concept, which involves social, ecological and economic objectives, and requires to sustain the integrity of resources exploitation, the direction of investments, the orientation of technological development and institutional change. Although there is still much confusion and conflict about exact meaning of sustainable development, many agree that sustainable development is about satisfying social, environmenta l, and economic goals. While th e concept is generally accepted and relatively easy to comprehend, the difficulty arises in trying to apply the principles of sustai nable development in practice. One of the difficulties is need to measure the “level of sustainability”. The desirable characteristics for sustainability indicators have to include: simple to calculate, useful for decision making, and robust in indicating progress towa rd sustainability. The exergy analysis a pproach based on full life cycle assessment (LCA) of the materials and technologies is a useful metrics to evaluate mitigation of green house gas (GHG) emissions associated with industrial eco materials and technologies. The metrics is used for reducing dimensionality on the input side by combining material and energy streams and out put side reducing different characterisation factors to a single “unsustainability” indicator in a theoretically rigorous manner. The adopted approach has been illustrated on a few examples associated with Australian aluminium industry.     

Product model structure for generalized optimal design

The framework of the generalized optimization product model with the core of network- and tree-hierarchical structure is advanced to improve the characteristics of the generalized optimal design. Based on the proposed node-repetition technique, a network-hierarchical structure is united with the tree-hierarchical structure to facilitate the modeling of serialization and combination products. The criteria for product decomposition are investigated. Seven tree nodes are defined for the construction of a general product model, and their modeling properties are studied in detail. The developed product modeling system is applied and examined successfully in the modeling practice of the generalized optimal design for a hydraulic excavator.     

The study of slip line field and upper bound method based on associated flow and non associated flow rules

At present, associated flow rule of traditional plastic theory is adopted in the slip line field theory and upper bound method of geotechnical materials. So the stress characteristic line conforms to the velocity line. It is proved that geotechnical materials do not abide by the associated flow rule. It is impossible for the stress characteristic line to conform to the velocity line. Generalized plastic mechanics theoretically proved that plastic potential surface intersects the M-C yield surface with an angle, so that the velocity line must be studied by non-associated flow rule. According to limit analysis theory, the theory of slip line field is put forward in this paper, and then the ultimate bearing capacity of strip footing is obtained based on associated flow rule and the non-associated flow rule individually. These two results are identical since the ultimate bearing capacity is independent of flow rule. On the contrary, the velocity fields of associated and non-associated flow are different which shows the velocity field based on the associated flow rule is incorrect.     

Application of Grey Associative Analysis to the Assessment of Regional Water Security

The assessment of water security is an important content in the security management of water resources due to the fact that the state of water security directly affects both the sustainable development of regional economy and the improvement on the living quality of mankind. Grey associative analysis is introduced and applied to assessment of water security on the basis of grey characteristics of the assessment index system of water security. As a case study shows, grey associative analysis is used for evaluating water security of some provinces in China, and the satisfactory assessment results are obtained. The sequence of provinces in China with regard to water security from good to poor is obtained and, moreover, the water security level of each region is also confirmed. The results obtained accord with the actual state of each region. They are of practical significance and can be used to guide the management of regional water security and a sustainable development of the economy therein. At the same time, the results demonstrate that grey associative analysis provides a new method for assessing water security     

Missing Data Imputation for Traffic Flow Based on Improved Local Least Squares

Complete and reliable field traffic data is vital for the planning, design, and operation of urban traffic management systems. However, traffic data is often very incomplete in many traffic information systems, which hinders effective use of the data. Methods are needed for imputing missing traffic data to minimize the effect of incomplete data on the utilization. This paper presents an improved Local Least Squares (LLS) approach to impute the incomplete data. The LLS is an improved version of the K Nearest Neighbor (KNN) method. First, the missing traffic data is replaced by a row average of the known values. Then, the vector angle and Euclidean distance are used to select the nearest neighbors. Finally, a regression step is used to get weights of the nearest neighbors and the imputation results. Traffic flow volume collected in Beijing was analyzed to compare this approach with the Bayesian Principle Component Analysis (BPCA) imputation approach. Tests show that this approach provides slightly better performance than BPCA imputation to impute missing traffic data.     

The resettlement planning and practice of Three Gorges Project

Migrant resettlement is essential to the success of the Three Gorges Project (TGP),and the smooth implementation of resettlement is ensured by the resettlement planning and effective organization management.In the process of resettlement planning and implementation,systematic legislation and document support system is established;environmental capacity analysis and assets appraisal methods are introduced;resettlement sites are selected through in-depth analysis and comparison;the relationship between resettlement compensation and local development is correctly understood and considered,and reasonable resettlement schedules are well prepared.Through the establishment of efficient management system and capital management mode of "static control and dynamic management",as well as the timely adjustment of plan according to actual situations,the resettlement is accomplished smoothly.Thus,the social stability of the reservoir area is ensured;the economic development of reservoir area is promoted,and it has promoted successfully the improvement of legislation,regulations and techniques for land requisition and resettlement.The paper also discusses the theory and prospective work of resettlement.     

Markedness and its Interpretation in Language Use

Language markedness is a common phenomenon in languages, and is reflected from hearing, vision and sense, i.e. the variation in the three aspects such as phonology, morphology and semantics. This paper focuses on the interpretation of markedness in language use following the three perspectives, i.e. pragmatic interpretation, psychological interpretation and cognitive interpretation, with an aim to define the function of markedness.     

Lower Paleozoic oil relationships within Williston Basin, Canada

The Williston Basin is a significant petroleum province, containing oil production zones that include the Middle Cambrian to Lower Ordovician, Upper Ordovician, Middle Devonian, Upper Devonian and Mississippian and within the Jurassic and Cretaceous. The oils of the Williston Basin exhibit a wide range of geochemical characteristics defined as "oil families", although the geochemical signature of the Cambrian Deadwood Formation and Lower Ordovician Winnipeg reservoired oils does not match any "oil family". Despite their close stratigraphic proximity, it is evident that the oils of the Lower Palaeozoic within the Williston Basin are distinct. This suggests the presence of a new "oil family" within the Williston Basin. Diagnostic geochemical signatures occur in the gasoline range chromatograms, within saturate fraction gas chromatograms and biomarker fingerprints. However, some of the established criteria and cross-plots that are currently used to segregate oils into distinct genetic families within the basin do not always meet with success, particularly when applied to the Lower Palaeozoic oils of the Deadwood and Winnipeg Formation.     

An Analysis of Catherine＇s Character——Wuthering Heights

Wuthering Heights, Emily Bronte＇s only novel, was published in December of 1847 under the pseudonym Ellis Bell. The book did not gain immediate success, but it is now thought one of the finest novels in the English language. Catherine is the key character of this masterpiece, because everybody and everything center on her though she had a short life. We can understand this masterpiece better if we know Catherine well.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

Features of Women's language

Language is a means of verbal communication. People use language to communicate with each other. In the society, no two speakers are exactly alike in the way of speaking. Some differences are due to age, gender, statue and personality. Above all, gender is one of the obvious reasons. The writer of this paper tries to describe the features of women＇s language from these perspectives： pronunciation, intonation, diction, subjects, grammar and discourse. From the discussion of the features of women＇s language, more attention should be paid to language use in social context. What＇s more, the linguistic phenomena in a speaking community can be understood more thoroughly.     

Design and analysis of generic LBS application developing platform

Location based services is promising due to its novel working style and contents.A software platform is proposed to provide application programs of typical location based services and support new applications developing efficiently. The analysis shows that this scheme is easy implemented, low cost and adapt to all kinds of mobile nework system.     

橡胶颗粒沥青混合料低温抗裂性试验研究

以AC-13级配为基础,将橡胶颗粒代替部分集料掺入混合料中,以低温弯曲试验为评价方法对不同橡胶颗粒掺量下沥青混合料的低温抗裂性进行研究,并引入应变能密度值对混合料的低温抗裂性进行综合评价.试验结果表明:橡胶颗粒沥青混合料试件的破坏微应变均超过2 300,满足冬寒区的技术指标;无论是否掺加橡胶颗粒,随着温度的下降,沥青混合料破坏时的最大弯拉强度增大,弯拉应变降低,劲度模量增大;弯曲应变能密度在胶粒掺量为1%左右时具有较大的弯曲应变能密度值,此时橡胶颗粒沥青混合料具有较好的低温抗裂性.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

低渗透非均质砂岩油藏启动压力梯度研究

理论推导与室内实验相结合,建立了低渗透非均质砂岩油藏启动压力梯度确定方法。首先借助油藏流场与电场相似的原理,推导了非均质砂岩油藏启动压力梯度计算公式。其次基于稳定流实验方法,建立了非均质砂岩油藏启动压力梯度测试方法。结果表明:低渗透非均质砂岩油藏的启动压力梯度确定遵循两个等效原则。平面非均质油藏的启动压力梯度等于各级渗透率段的启动压力梯度关于长度的加权平均;纵向非均质油藏的启动压力梯度等于各渗透率层的启动压力梯度关于渗透率与渗流面积乘积的加权平均。研究成果可用于有效指导低渗透非均质砂岩油藏的合理井距确定,促进该类油藏的高效开发。     

Quantitative trait loci （QTLs） for quality traits related to protein and starch in wheat

Quality traits in wheat （Triticum aestirum L.） were studied by quantitative trait locus （QTL） analysis in a recombinant inbred line （RIL） population, a set of 131 lines derived from Chuan 35050 × Shannong 483 cross （ChSh）. Grains from RILs were assayed for 21 quality traits related to protein and starch. A total of 35 putative QTLs for 19 traits with a single QTL explaining 7.99-40.52% of phenotypic variations were detected on 10 chromosomes, 1D, 2A, 2D, 3B, 3D, 5A, 6A, 6B, 6D, and 7B. The additive effects of 30 QTLs were positive, contributed by Chuan 35050, the remaining 5 QTLs were negative with the additive effect contributed by Shannong 483. For protein traits, 15 QTLs were obtained and most of them were located on chromosomes 1 D, 3B and 6D, while 20 QTLs for starch traits were detected and most of them were located on chromosomes 3D, 6B and 7B. Only 7 QTLs for protein and starch traits were co-located in three regions on chromosomes 1D, 2A and 2D. These protein and starch trait QTLs showed a distinct distribution pattern in certain regions and chromosomes. Twenty-two QTLs were clustered in 6 regions of 5 chromosomes. Two QTL clusters for protein traits were located on chromosomes 1D and 3B, respectively, three clusters for starch traits on chromosomes 3D, 6B and 7B, and one cluster including protein and starch traits on chromosome 1D.