Tricolor white emitting phosphor co-doped with Eu, Dy in SiO2 matrix

A Eu, Dy co-doped SiO2 matrix, white emitting phosphor was prepared by the sol-gel technique. Strong red, green and blue emissions located at 618 nm, 573 nm and 400-550 nm were observed under UV laser excitation at room temperature. Such techniques as FT-IR and TGA-DSC were used to measure the microstructure of the luminescent material. The influence of the preparation techniques on the luminescence property of the Eu, Dy co-doped SiO2 matrix, such as anneal temperature, anneal time, dried atmosphere and the components of the matrix, was systematically studied, and the luminescence mechanism was interpreted. The red emission is the strongest when annealed at 750℃. However, blue emission appears when annealed at 700℃ and is the intensest at 900℃. For the samples dried in vacuum, Eu^3＋ is more easily deoxidized to Eu^2＋ at lower temperatures, because the samples dried in the air compared with that dried in vacuum need higher temperature to form network structures. Only the SA and SAB matrix annealed at 850℃ had blue emission in the four matrices （SA, SAB, SB, S） xerogel and the emission in the SAB matrix was stronger than that in the SA matrix. This may be due to the eutectic phase formed by the oxide boron, alkaline oxide and alumina in the SAB matrix, which constructs network structures and stabilizes the emission center and enhances the blue emission.     

Preparation and luminescence characteristics of Sr3SiO5：Eu^2＋ phosphor for white LED

The Sr3SiO5：Eu^2＋ phosphor was synthesized by high temperature solid-state reaction. The emission spectrum of Sr3SiO5：Eu^2＋ shows two bands centered at 487 and 575 nm, which well agree with the theoretic values of emission spectrum. The excitation spectrum for 575 nm emission center has several excitation bands at 365, 418, 458 and 473 nm. And the results show that the emission spectrum of Sr3SiO5：Eu^2＋ is influenced by the Eu^2＋ concentration. The relative emission spectra of the white-emitting InGaN-based YAG：Ce^3＋ LED and Sr3SiO5：Eu^2＋ LED were investigated. The results show that the color development of InGaN-based Sr3SiO5：Eu^2＋ is better than that of InGaN-based YAG：Ce^3＋, and the CIE chromaticity of InGaN-based Sr3SiO5：Eu^2＋ is （x=0.348, y=0.326）.     

Multi-color long-lasting phosphorescence of rare earth ions in CdSiO<Subscript>3</Subscript> matrix

A series of rare earth ions doped CdSiO3:RE^3 (RE=Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho,Er, Tin, Yb, Lu) multi-color long-lasting phosphorescence phosphors are prepared by the conventional hightemperature solid-state method. The results of XRD measurement indicate that the products fired under 1050~C for 3h have a good crystallization without any detectable amount of impurity phase. Rare earth ions doped CdSiO3 phosphors possess excellent Inmiuescence properties. When rare earth ions such as Y^3 , La^3 , Gd^3 , Lu^3 , Ce^3 , Nd^3 , Ho^3 , Er^3 ,Tm^3 and Yb^3 are introduced into the CdSiO3 host, one broadband centered at about 420 nm resulting from traps can be observed. In the case of other earth ions such as Pr^3 ,Sm^3 , Eu^3 , Tb^3 and Dy^3 , their characteristic line emitting as well as the -420 nm broadband luminescence can be obtained. The mixture of their characteristic line emitting with the -420 nm broadband Inminescence results in various afterglow color.     

Structural investigation and luminescent properties of BaZr(BO<Subscript>3</Subscript>)2:Eu<Superscript>3+</Superscript> phosphors containing Si

Si⁴⁺-doped BaZr(BO₃)₂:Eu³⁺ phosphors are prepared by a conventional solid-state reaction. The influence of Si⁴⁺ addition on the charge transfer state of Eu³⁺-O^2– and photoluminescence (PL) properties of BaZr(BO₃)₂:Eu³⁺ are discussed. Room temperature PL spectra indicated that efficient emission is obtained by Si doping. Increased values for the peak-peak ratio (PPR) of BaZr(BO₃)₂:Eu³⁺ at higher Si doping concentrations implied that the Eu³⁺ ion is located in a more asymmetric environment in BaZr_0.8Si_0.2(BO₃)₂:Eu³⁺ than in the undoped samples. The Judd-Ofelt parameters Ω_λ (λ=2,4) were calculated from the PL data, giving results that were consistent with those from the PPR. The maximum radiative quantum efficiency was achieved at a Si doping concentration of 20 mol%.     

Photoluminescence and cathodoluminescence properties of CaLaGa<Subscript>3</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>3+</Superscript> phosphors

The CaLaGa₃O₇:Eu³⁺ phosphor was prepared by a chemical co-precipitation method. Field emission scanning electron microscopy (FE-SEM), laser particle size analysis, X-ray diffraction (XRD), photoluminescence (PL), and cathodoluminescence (CL) spectra were utilized to characterize the synthesized phosphor. The results revealed that the phosphor was composed of microspheres with a slight agglomerate phenomenon and was spherically shaped. The average grain size was about 1.0 μm. Eu³⁺ ions, as luminescent centers, substituted La³⁺ ions into the single crystal lattice of CaLaGa₃O₇ with the sites of C_s. Although the CL spectrum was greatly different from the PL spectrum, it had the strongest red emission corresponding to the ⁵D₀ →⁷F₂ transition of Eu³⁺. Under the excitation of UV light (287 nm) and electron beams (1.0–7.0 kV), the chromaticity coordinates of the phosphor were found to be in the nearly red and orange light regions, respectively.     

Up-conversion luminescence of Er^3＋ doped and Er^3＋/Yb^3＋ co-doped YTaO4

The synthesis and up-conversion luminescent properties of YTaO4：Er^3＋ and YTaO4：Er^3＋/Yb^3＋ are reported for the first time. According to the measurement results of up-conversion spectra, Yb^3＋ co-doping can remarkably enhance the green （^2H11/2/^4S3/2→^4I15/2） and red （^4F9/2→^4I15/2） emissions, but depress the infrared emission （^4I9/2→^4I15/2）. With the increase of the Yb^3＋ concentration, the intensity of green emission increases, after that, when the Yb^3＋ concentration increases continuously, the intensity of green emission decreases, while those of the red and infrared emissions increase and decrease alternately. In addition, the up-conversion mechanisms of Er^3＋ doped and Er^3＋/Yb^3＋ co-doped YTaO4 are also discussed. It is found that the transform of up-conversion mechanism from two-step energy transfer to cooperating sensitization takes place when Yb^3＋ concentration is increased up to 12 mol%. With the further increase of Yb^3＋ concentration, the energy-back-transfer gradually becomes the dominant up-conversion mechanism, which results in the quenching of the green emission and slight increasing of the red and infrared emissions.     

The luminescence properties of Sr3Gd(BO3)3: Tb3+ phosphors under vacuum ultraviolet excitation

Tb3+-activated Sr3Gd(BO3)3 green phosphors were prepared by conventional solid-state reaction. The vacuum ultraviolet (VUV) excitation, photoluminescence (PL) and decay properties of the phosphors in the visible range were investigated. The excitation spectrum showed a strong broad band from 160 to 200 nm with a maximum at 183 nm which was adjacent to the VUV excitation light source of 172 nm. Under excitation at 172 nm, the optimum co-doping concentration of Tb3+ was 10 mol%, and the emission intensity of Sr3Gd0.9(BO3)3:0.1Tb3+ was comparable to that of commercial Zn2SiO4:Mn2+. The strongest emission peak of Sr3Gd0.9(BO3)3:0.1Tb3+ was at 543 nm with chromaticity coordinates of (0.2626, 0.4922) and a lifetime of 2.32 ms. The optical properties of the green phosphor Sr3Gd(BO3)3:Tb3+ make it suitable for use in Hg-free fluorescent lamps and plasma display panels.     

Preparation and upconversion luminescence of YVO<Subscript>4</Subscript>:Er<Subscript>3+</Subscript>, Yb<Subscript>3+</Subscript>

YVO₄:Er³⁺, Yb³⁺ with varying Yb³⁺ concentrations were prepared by a precipitation method. The results of X-ray diffraction (XRD) show that all the samples have a tetragonal zircon structure; the calculated average crystallite sizes are in the range of 14–22 nm. The lattice constants and cell volume of the samples decrease slightly with the increase in Yb³⁺ concentration. The upconversion luminescence spectra of all the samples were studied under 980 nm laser excitation. The strong green emission is observed, which is attributed to the ²H_11/2 → ⁴I_15/2 and ⁴S_3/2→⁴I_15/2 transitions of Er³⁺, and the red emission peaks in 650–675 nm can be ignored. The emission intensity for the sample depends on the Yb³⁺ concentration. These results reveal that the upconversion processes of YVO₄:Er³⁺, Yb³⁺ are related to the structure and the doping Yb³⁺ concentration of the sample.     

Tb~(3+)掺杂β-Ga_2O_3纳米粉末的结构和光致发光性质的研究

采用溶胶-凝胶法制备Tb3+掺杂β-Ga2O3纳米粉末.用X-射线衍射(XRD)、拉曼(Raman)、光致发光激发谱(PLE)和发光谱(PL)对其进行了一系列的表征. XRD 和 Raman 的结果表明: Tb3+离子的掺入没有改变β-Ga2O3结构.用350 nm的激发光去激发Tb3+掺杂β-Ga2O3纳米粉末,样品的最强峰在543 nm (5D4-7F5)附近,对应着Tb3+离子的绿光发射.此外,还讨论了能量传递机制.     

Fabrication of visible-light responsive S-F-codoped TiO<Subscript>2</Subscript> nanotubes

Fabrication and S-F-codoping of TiO2 nanotubes were carried out by a one-step electrochemical anodization process to extend the photoresponse of TiO2 to the visible-light region. The prepared samples were annealed in air and detected by SEM, XRD, XPS and UV-vis DRS spectrophotometer. The results showed that the average tube diameter of the nanotubes was 150 nm and the average tube length was 400 nm. The doped TiO2 nanotubes exhibited strong absorption in visible-light region. Photoelectrocatalytic degradation efficiency of 4-CP over S-F-codoped TiO2 nanotubes was 39.7% higher than that of only-F-doped sample. Moreover, sulfur and fluorine codoped into substitutional sites of TiO2 had been proven to be indispensable for strong response and high photocatalytic activity under visible light, as assessed by XPS.     

The development of silicate matrix phosphors with broad excitation band for phosphor-convered white LED

This paper briefly reviews the recent progress in alkaline earth silicate host luminescent materials with broad excitation band for phosphor-convered white LED. Among them, the Sr-rich binary phases （Sr, Ba, Ca, Mg）2SiO4：Eu^2＋ and （Sr, Ba, Ca, Mg）3SiO5：Eu^2＋ are excellent phosphors for blue LED chip white LED. They have very broad excitation bands and exhibit strong absorption of blue radiation in the range of 450-480 nm. And they exhibit green and yellow-orange emission under the InGaN blue LED chip radiation, respectively. The luminous efficiency of InGaN-based （Sr, Ba, Ca, Mg）=SiO4： Eu^2＋ and （Sr, Ba, Ca, Mg）3SiO5：Eu^2＋ is about 70-80 lm/W, about 95 %-105% that of the InGaN-based YAG ：Ce, while the correlated color temperature is between 4600--11000 K. Trinary alkaline earth silicate host luminescent materials MO（M=Sr, Ca, Ba）-Mg（Zn）O-SiO2 show strong absorption of deep blue/near-ultraviolet radiation in the range of 370-440 nm. They can convert the deep blue/near-ultraviolet radiation into blue, green, and red emissions to generate white light. The realization of high-performance white-light LEDs by this approach presents excellent chromaticity and high color rendering index, and the application disadvantages caused by the mixture of various matrixes can be avoided. Moreover, the application prospects and the trends of research and development of alkaline earth silicate phosphors are also discussed.     

Energy transfer process between Eu3+ and wide-band-gap SnO2 nanocrystals in silica films studied by photoluminescence excitation and time-resolved photoluminescence techniques

Eu3+ions embedded in silica thin films codoped with SnO2 nanocrystals were fabricated by sol–gel and spin-coating methods.SnO2 nanocrystals with controllable sizes were synthesized through precisely controlling the Sn concentrations.The influences of doping and annealing conditions on the photoluminescence intensity from SnO2 nanocrystals are systematically investigated.The effective energy transfer from the defect states of SnO2nanocrystals to nearby Eu3+ions has revealed by the selective photoluminescence excitation spectra.The efficiency of the Forster resonance energy transfer is evaluated by the time-resolved photoluminescence measurements,which is about 29.1%based on the lifetime tests of the SnO2emission.     

Potential red-emitting phosphor GdNbO4:Eu3+,Bi3+ for near-UV white light emitting diodes

A red-emitting phosphor GdNbO₄:Eu³⁺,Bi³⁺ was prepared by a high temperature solid-state reaction technique. The phosphor was characterized by X-ray diffraction (XRD), particle size analyzer and fluorescence spectrometer. The single phase of GdNbO₄:Eu³⁺,Bi³⁺ was obtained at 1150°C and the average particle diameter was about 2.30 ??m. Excitation and emission spectra reveal that the phosphor can be efficiently excited by ultraviolet (UV) light (394 nm) and emit the strong red light of 612 nm due to the Eu³⁺ transition of ⁵D₀??⁷F₂. The optimum content of Eu³⁺ doped in the phosphor GdNbO₄:Eu³⁺ is 20mol%. The phosphor Gd_0.80NbO₄:0.20Eu³⁺,0.03Bi³⁺ shows much stronger photoluminescence intensity and better chromaticity coordinates (x=0.642, 0.352) than GdNbO₄:Eu³⁺. It is confirmed that Gd_0.80NbO₄:0.20Eu³⁺,0.03Bi³⁺ is a potential candidate for near-UV chip-based white light emitting diodes.     

Thermal degradation of BaAl2Si2O8：Eu2＋ phosphor excited by near ultraviolet light

Eu2+ doped BaAl2Si2O8 phosphor was synthesized by one-step calcination of precursors that were prepared by chemical co-precipitation.The thermal degradation properties of BaAl2Si2O8:Eu2+ were investigated by photoluminescence,lifetime and chromaticity coordinate measurements.BaAl2Si2O8:Eu2+ is efficiently excited by incident light of 250-400 nm,which matches the emission of near ultraviolet LED chips well.BaAl2Si2O8:Eu2+ exhibits broad blue emission at 470 nm because of the 4f65d1-4f7(8S7/2) transition of Eu2+ ions,and the emission band shows an unusual blue shift with bandwidth broadening and emission intensity decreasing as the annealing temperature is increased.The luminescence decay and CIE chromaticity coordinates of BaAl2Si2O8:Eu2+ were determined to investigate its application in white LEDs.     

Investigation of the electronic structure and photoluminescence properties of Eu3＋ in Sr2Mgl_xZnxSi207 （0 〈x 〈 1）

Undoped and Eu 3+-doped Sr 2 Mg 1-x Zn x Si 2 O 7 (0≤x≤1) powder crystals were obtained by conventional solid-state reaction.X-ray diffraction,inductively coupled plasma analysis,and Fourier transform infrared spectroscopy results implied that a complete solid-solution formed between Sr 2 MgSi 2 O 7 and Sr 2 ZnSi 2 O 7 as well as local structural adjustment.Excitation spectra exhibited O 2-Eu 3+ charge transfer (CT) bands centered at 250 nm for Sr 2 MgSi 2 O 7:Eu 3+ and 258 nm for Sr 2 ZnSi 2 O 7:Eu 3+.Emission spectra exhibited a major band around 616 nm,which showed the environment around Eu 3+ was non-centrosymmetric in both Sr 2 MgSi 2 O 7:Eu 3+ and Sr 2 ZnSi 2 O 7:Eu 3+.In addition,first principles calculations within the local density approximation (LDA) of density functional theory (DFT) were used to calculate the electronic structure of Sr 2 MgSi 2 O 7 and Sr 2 ZnSi 2 O 7.Calculated results were correlated with experimental UV-vis reflection spectra and the observed shift of the O 2-Eu 3+ CT band.     

Synthesis and luminescence properties of Eu3+, Sm3+ doped (YxGd1-x)2O3:Si4+, Mg2+ long-lasting phosphor

A novel red long-lasting phosphor, (Y_1−x Gd _x )₂O₃:Eu³⁺, Sm³⁺, Si⁴⁺, Mg²⁺, was synthesized by the co-precipitation method using oxalate precipitation as the precursor. X-ray diffraction (XRD), scanning electronic microscopy (SEM), integrated thermal analyzer (TG), and photoluminescence spectra (PL) as well as the ST-900PM weak light photometer were used to study the synthesis conditions, morphology, luminescence properties, and the decay time of the phosphor. The XRD results show that the products synthesized at 1400°C for 4 h have good crystallization without any detectable impurity phases. Based on the PL spectra, the optimal conditions are as the following. The molar ratios of Y³⁺ to Gd³⁺ and Eu³⁺ to Sm³⁺ are 2:8 and 3:1, respectively, and the contents of Mg²⁺ and SiO₂ are 5mol% and 3mol%, respectively. The decay time monitored by the ST-900PM weak light photometer is 7200 s, increasing 44% and 100%, respectively, compared with the Eu³⁺ and Sm³⁺ single-doped phosphors. The results indicate that the energy transfer is from Sm³⁺ to Eu³⁺ ion, and Sm³⁺ is a good sensitizer to Eu³⁺.     

Near-infrared to visible up-conversion emissions of Er^3＋ doped Al2O3 powders derived from the sol-gel method

The Er3 doped Al2O3 powders were prepared by the sol-gel method using the aluminium isopropoxide [Al(OC3H7)3]-derived Al2O3 sols with addition of the erbium nitrate [Er(NO3)3.5H2O]. The different phase structure, including three crystalline types of (Al,Er)2O3 phases, γ, θ, α, and two Er-Al-O phases, ErAlO3 and Al10Er6O24, was obtained with the 1 mol% Er3 doped Al2O3 powders at the different sintering temperatures of 600―1200℃. The green and red up-conversion emissions centered at about 523, 545 and 660 nm, corresponding respectively to the 2H11/2, 4S3/2→4I15/2 and 4F9/2→4I15/2 transitions of Er3 , were detected by a 978 nm semiconductor laser diodes excitation. The phase structure and OH content had evident influence on the up-conversion emissions intensity. The maximum intensities of both the green and red emissions were obtained respectively for the Er3 doped Al2O3 powders sintered at 1200 ℃, which was composed mainly of α-(Al,Er)2O3, less of ErAlO3 and Al10Er6O24 phases, and with the least OH content. The two-photon absorption up-conversion process was involved in the green and red up-conversion emissions of the Er3 doped Al2O3 powders.     

Preparation and characterization of three-dimensionally ordered macroporous polystyrene <Emphasis Type="Italic">via</Emphasis> atom-transfer radical polymerization

Three-dimensionally ordered macroporous polystyrene （3DOM PS） with pore size of 350 nm was fab- ricated using Cp2Co/Ethyl 2-bromoisobutyrate （EBiB） catalytic system by ATRP. The resulting polymers were detected by FT-IR, 1H-NMR, SEM, and GPC. The microstructure of 3DOM PS was confirmed by FT-IR and 1H-NMR. SEM micrographs show that both silica spheres within the templates and pores in the 3DOM polystyrene are arranged in highly ordered fashion, and the shrinkage of the pores in the 3DOM PS is 24%. GPC curves show that the 3DOM PS possesses slightly lower Mn and narrow MWD compared with bulk one. This result indicats that living polymerization is different from non-living polymerizationin in the confined space.     

Compression behavior and equation of state of Ni77P23 amorphous alloy

The compression behavior of Ni77P23 amorphous alloy is investigated at room temperature in a diamond-anvil cell instrument using insitu high pressure energy dispersive X-ray diffraction with a syn- chrotron radiation source. The equation of state is determined by fitting the experimental data accord- ing to Birch-Murnaghan equation: -ΔV/V0=0.08606P-3.2×10-4P2 5.7×10-6P3. It is found that the structure of Ni77P23 amorphous alloy is stable under pressures up to 30.5 GPa.     

Photoluminescence and cathodoluminescence properties of a novel CaLaGa307：Dy3＋ phosphor

A single host white emitting phosphor, CaLaGa3O7:Dy3+, was synthesized by chemical co-precipitation. Field emission scanning electron microscopy, X-ray diffraction, laser particle size analysis, and photoluminescence and cathodoluminescence spectra were used to investigate the structural and optical properties of the phosphor. The phosphor particles were composed of microspheres with a slight tendency to agglomerate, and an average diameter was of about 1.0 μm. The Dy3+ ions acted as luminescent centers, and substituted La3+ ions in the single crystal lattice of CaLaGa3O7 where they were located in Cs sites. Under excitation with ultraviolet light and a low voltage electron beam, the CaLaGa3O7:Dy3+ phosphor exhibited the characteristic emission of Dy3+ (4F9/2-6H15/2 and 4F9/2-6H13/2 transitions) with intense yellow emission at about 573 nm. The chromaticity coordinates for the phosphor were in the white region. The relevant luminescence mechanisms of the phosphor are investigated. This phosphor may be applied in both field emission displays and white light-emitting diodes.