具有良好可再生性的新型二氧化硅磁性氧化石墨烯纳米复合材料

Graphene oxide (GO) wrapped Fe₃O₄ nanoparticles (NPs) were prepared by coating the Fe₃O₄ NPs with a SiO₂ layer, and then modifying by amino groups, which interact with the GO nanosheets to form covalent bonding. The SiO₂ coating layer plays a key role in integrating the magnetic nanoparticles with the GO nanosheets. The effect of the amount of SiO₂ on the morphology, structure, adsorption, and regenerability of the composites was studied in detail. An appropriate SiO₂ layer can effectively induce the GO nanosheets to completely wrap the Fe₃O₄ NPs, forming a core-shell Fe₃O₄@SiO₂@GO composite where Fe₃O₄@SiO₂ NPs are firmly encapsulated by GO nanosheets. The optimized Fe₃O₄@SiO₂@GO sample exhibits a high saturated adsorption capacity of 253 mg·g?1 Pb(II) cations from wastewater, and the adsorption process is well fitted by Langmuir adsorption model. Notably, the composite displays excellent regeneration, maintaining a ~90% adsorption capacity for five cycles, while other samples decrease their adsorption capacity rapidly. This work provides a theoretical guidance to improve the regeneration of the GO-based adsorbents.     

微波预处理对复杂铜矿磨矿及浮选动力学的影响

The effect of CaCO₃, Na₂CO₃, and CaF₂ on the reduction roasting and magnetic separation of high-phosphorus iron ore containing phosphorus in the form of Fe₃PO₇ and apatite was investigated. The results revealed that Na₂CO₃ had the most significant effect on iron recovery and dephosphorization, followed by CaCO₃, the effect of CaF₂ was negligible. The mechanisms of CaCO₃, Na₂CO₃, and CaF₂ were investigated using X-ray diffraction (XRD), scanning electron microscopy and energy dispersive spectrometry (SEM–EDS). Without additives, Fe₃PO₇ was reduced to elemental phosphorus and formed an iron–phosphorus alloy with metallic iron. The addition of CaCO₃ reacted with Fe₃PO₇ to generate an enormous amount of Ca₃(PO₄)₂ and promoted the reduction of iron oxides. However, the growth of iron particles was inhibited. With the addition of Na₂CO₃, the phosphorus in Fe₃PO₇ migrated to nepheline and Na₂CO₃ improved the reduction of iron oxides and growth of iron particles. Therefore, the recovery of iron and the separation of iron and phosphorus were the best. In contrast, CaF₂ reacted with Fe₃PO₇ to form fine Ca₃(PO₄)₂ particles scattered around the iron particles, making the separation of iron and phosphorus difficult.     

不同硅饱和系数水榴石的碳酸化分解动力学

Carbonated decomposition of hydrogarnet is one of the vital reactions of the calcification–carbonation method, which is designed to dispose of low-grade bauxite and Bayer red mud and is a novel eco-friendly method. In this study, the effect of the silica saturation coefficient (x) on the carbonation of hydrogarnet was investigated from the kinetic perspective. The results indicated that the carbonation of hydrogarnets with different x values (x = 0.27, 0.36, 0.70, and 0.73) underwent two stages with significantly different rates, and the kinetic mechanisms of the two stages can be described by the kinetic functions R3 and D3. The apparent activation energies at Stages 1 and 2 were 41.96–81.64 and 14.80–34.84 kJ/mol, respectively. Moreover, the corresponding limiting steps of the two stages were interfacial chemical reaction and diffusion.     

一种超重力燃烧合成制备高性能高熵合金的新方法

A new method of high-gravity combustion synthesis (HGCS) followed by post-treatment (PT) is reported for preparing high-performance high-entropy alloys (HEAs), Cr_0.9FeNi_2.5V_0.2Al_0.5 alloy, whereby cheap thermite powder is used as the raw material. In this process, the HEA melt and the ceramic melt are rapidly formed by a strong exothermic combustion synthesis reaction and completely separated under a high-gravity field. Then, the master alloy is obtained after cooling. Subsequently, the master alloy is sequentially subjected to conventional vacuum arc melting (VAM), homogenization treatment, cold rolling, and annealing treatment to realize a tensile strength, yield strength, and elongation of 1250 MPa, 1075 MPa, and 2.9%, respectively. The present method is increasingly attractive due to its low cost of raw materials and the intermediate product obtained without high-temperature heating. Based on the calculation of phase separation kinetics in the high-temperature melt, it is expected that the final alloys with high performance can be prepared directly across master alloys with higher high-gravity coefficients.     

利用皮秒激光烧蚀制备非球形铝纳米颗粒

We report the picosecond laser ablation of aluminum targets immersed in a polar organic liquid (chloroform, CHCl₃) with ~2 ps laser pulses at an input energy of ~350 μJ. The synthesized aluminum nanoparticles exhibited a surface plasmon resonance peak at ~340 nm. Scanning electron microscopy images of Al nanoparticles demonstrated the spherical morphology with an average size of (27 ± 3.6) nm. The formation of smaller spherical Al nanoparticles and the diminished growth could be from the formation of electric double layers on the Al nanoparticles. In addition to spherical aluminum nanoparticles, triangular/pentagonal/hexagonal nanoparticles were also observed in the colloidal solution. Field emission scanning electron microscopy images of ablated Al targets demonstrated laser induced periodic surface structures (LIPSSs), which were the high spatial frequency LIPSSs (HSF-LIPSSs) since their grating period was ~280 nm. Additionally, coarse structures with a period of ~700 nm were observed.     

窄板坯结晶器内连铸工艺参数对钢液流场的影响

Computational simulations and high-temperature measurements of velocities near the surface of a mold were carried out by using the rod deflection method to study the effects of various operating parameters on the flow field in slab continuous casting (CC) molds with narrow widths for the production of automobile exposed panels. Reasonable agreement between the calculated results and measured subsurface velocities of liquid steel was obtained under different operating parameters of the CC process. The simulation results reveal that the flow field in the horizontal plane located 50 mm from the meniscus can be used as the characteristic flow field to optimize the flow field of molten steel in the mold. Increases in casting speed can increase the subsurface velocity of molten steel and shift the position of the vortex core downward in the downward circulation zone. The flow field of liquid steel in a 1040 mm-wide slab CC mold can be improved by an Ar gas flow rate of 7 L·min?1 and casting speed of 1.7 m·min?1. Under the present experimental conditions, the double-roll flow pattern is generally stable at a submerged entry nozzle immersion depth of 170 mm.     

电渣重熔脱硫技术研究进展

Electroslag remelting (ESR) gives a combination of liquid metal refining and solidification structure control. One of the typical aspects of liquid metal refining during ESR for the advanced steel and alloy production is desulfurization. It involves two patterns, i.e., slag–metal reaction and gas–slag reaction (gasifying desulfurization). In this paper, the advances in desulfurization practices of ESR are reviewed. The effects of processing parameters, including the initial sulfur level of consumable electrode, remelting atmosphere, deoxidation schemes of ESR, slag composition, melting rate, and electrical parameters on the desulfurization in ESR are assessed. The interrelation between desulfurization and sulfide inclusion evolution during ESR is discussed, and advancements in the production of sulfur-bearing steel at a high-sulfur level during ESR are described. The remaining challenges for future work are also proposed.     

Mineral transition and formation mechanism of calcium aluminate compounds in CaO?Al2O3?Na2O system during high-temperature sintering

The mineral transition and formation mechanism of calcium aluminate compounds in CaO?Al₂O₃?Na₂O system during the high-temperature sintering process were systematically investigated using DSC?TG, XRD, SEM?EDS, FTIR, and Raman spectra, and the crystal structure of Na₄Ca₃(AlO₂)₁₀ was also simulated by Material Studio software. The results indicated that the minerals formed during the sintering process included Na₄Ca₃(AlO₂)₁₀, CaO·Al₂O₃, and 12CaO·7Al₂O₃, and the content of Na₄Ca₃(AlO₂)₁₀ could reach 92wt% when sintered at 1200°C for 30 min. The main formation stage of Na₄Ca₃(AlO₂)₁₀ occurred at temperatures from 970 to 1100°C, and the content could reach 82wt% when the reaction temperature increased to 1100°C. The crystal system of Na₄Ca₃(AlO₂)₁₀ was tetragonal, and the cells preferred to grow along crystal planes (110) and (210). The formation of Na₄Ca₃(AlO₂)₁₀ was an exothermic reaction that followed a secondary reaction model, and its activation energy was 223.97 kJ/mol.     

含细夹层的分矿充填层中流动特性的可视化

Ore particles, especially fine interlayers, commonly segregate in heap stacking, leading to undesirable flow paths and changeable flow velocity fields of packed beds. Computed tomography (CT), COMSOL Multiphysics, and MATLAB were utilized to quantify pore structures and visualize flow behavior inside packed beds with segregated fine interlayers. The formation of fine interlayers was accompanied with the segregation of particles in packed beds. Fine particles reached the upper position of the packed beds during stacking. CT revealed that the average porosity of fine interlayers (24.21%) was significantly lower than that of the heap packed by coarse ores (37.42%), which directly affected the formation of flow paths. Specifically, the potential flow paths in the internal regions of fine interlayers were undeveloped. Fluid flowed and bypassed the fine interlayers and along the sides of the packed beds. Flow velocity also indicated that the flow paths easily gathered in the pore throat where flow velocity (1.8 × 10?5 m/s) suddenly increased. Fluid stagnant regions with a flow velocity lower than 0.2 × 10?5 m/s appeared in flow paths with a large diameter.     

工科数学教学改革探讨

工科数学教学既要教思想、教方法，又要教做人；既面向全体学生、面向大多数，又要面向两头；要引导学生转变学习观念；同时应加强针对性，注重启发性，提高积极性等，以达到提高学生素质、培养学生能力的目的．     

萨特的《存在主义是一种人道主义》论析

"存在"就是人的存在;"本质"就是人的社会概念。存在主义认为"存在先于本质",也就是说人要成为人,成为一个全面完整的人,首先要从认识自我开始,认识社会,积极入世,担当责任,成为本质意义上的人。存在主义立意为人在一个恶劣的社会处境中指出为人之道和入世之道,教导人如何存在,如何为人。存在主义鼓励人乐观向上,自在自为,从存在出发,找到自己,积极入世,实现自我的价值,成为真正的人;从我做起,承担责任,超越自我,以人道主义精神为宗旨,创造社会,开创人类和谐的社会生活。     

浅谈如何上好新课

上好新课的关键是:一要敢于承担,乐于承担新课,增强对新开课程的兴趣;二要深入钻研教材,认真备好每一堂课,努力实现教学与德育的结合;三要向老教师学习,不断总结教学经验,提高教学艺术;四要重视课后辅导答疑这个环节,做到因材施教,补充课堂教学的不足     

高等师范教育类课程与教学改革研究

高师教育类课程与教学改革的主要构想与实践为：准确界定其性质和地位,加大其在高师整体课程中的比重,优化课程结构与体系,构建学科、活动、有机联系的课程体系;精选教学内容,合理安排开课顺序和分配教学时间;更新教学方法,增强课程吸引力。     

中职语文课程资源的开发与利用

中职学校语文课程资源的开发与利用，从语文课改的思路与设想有：通过对教材的修订，让更多的鲜活资源注入中职语文课堂；通过引入校园的文化建设，使语文教学更加丰富多彩；通过学生能动性课程资源的开发，提高学生的动手、动口能力；通过利用生活中的课程资源，实现快乐语文教学；通过影视与网络资源的结合，达到人本教育的目的。     

基于城市意象理论的广州大学城形象优化研究

通过意象调查,调查结果显示广州大学城形象有待完善.在凯文林奇的城市意象理论基础上,围绕大学城的七个意象要素,提出优化广州大学城形象的建议:发挥滨水岸线长的优势,突出岛的意象; 建环中心湖建筑群,强化城市中心形象,建入口标志雕塑,突显大学城精神; 创造丰富的节点,采用复合化功能分区; 加快资源的共享,将校区与保留村的建设结合起来,促进大学城的和谐发展; 创设有趣便捷的街道,增强大学城的可读性; 着力营造校园文化广场,保持地方文化的可持续性,创设文化大学城.     

《周易》道德修养思想研究

《周易》是最早论述道德修养的著作。从顽强进取，自强不息，谦虚谨慎，勤俭节约，关心民众，以民为本，任人为贤，识贤用贤几方面进行论述。     

关于我院辅导员队伍建设的实践与思考

做好高校辅导员队伍建设,就要充分了解辅导员的工作特点。做好辅导员队伍建设工作,要切实落实政策,积极营造优良工作环境;要进一步明确角色定位,让辅导员当好"人生导师";要推动专业化发展,打造一支高水平队伍;要大力构建长效机制,保持队伍发展活力;要鼓励辅导员参与学校管理;要鼓励辅导员结合自身工作实际开展教学、科研活动。     

以职业技能提升为目标规范优化高职实验实训项目

高等职业技术教育以培养生产一线的技术应用型人才为目标,必须对实验实训项目进行合理的规范和科学的优化,使之目的要求明确,内容合理实用,分组合理适度,方法步骤规范,考核的标准要求体现高职教育的价值取向,加强实践教学管理,提升职业技能。     

增强高校网络德育实效性的立体考察

提高高校网络德育的实效性是一项综合性工程,需要开设网络德育课、创新网站德育内容以充分吸引大学生的注意力、创新德育教育手段和途径、建立开放式的互联德育立体网络、加强网络德育队伍的建设、建立和完善网络文化建设,特别是校园网络文化建设的维护机制、引导和鼓励大学生参加实践和加强制度建设,最终形成促进网络德育生态发展的机制。