一种基于C-DGS的紧凑型三通带滤波器

利用矩形微带谐振腔与C型缺陷地共同形成高效耦合的原理,提出了一种基于C型缺陷地(defected ground structure,C-DGS)的紧凑型三通带滤波器。采用HFSS对三通带滤波器进行仿真优化。通过调节介质基板的厚度可以获得不同工作频率的通带,改变C型缺陷槽的尺寸可以调整滤波器的工作特性。在仿真的基础上进行实物加工,滤波器的尺寸为16 mm×12 mm×0.8 mm,测试结果与仿真结果良好吻合。滤波器三个通带中心频率分别为0.1 GHz、6.2 GHz、10.9 GHz;通带内插入损耗分别为-0.5 d B、-0.8 d B、-2.8 d B。     

基于倒置转换的二次通带抑制微带滤波器

基于Butterworth带通滤波器原型,应用饲置转换和Richards变换进行微带滤波器设计,得到的滤波器具有较强的二次通带抑制能力。对设计结果进行的仿真表明,滤波器3dB通带范围4．1～4．9GHz,对二次谐波处寄生通带的抑制大于50dB。本文的设计方法简单高效,具有通用性;得到的微帝滤波器结构小巧,易于实现。     

Development of high-temperature superconducting filters operating at temperatures above 90 K

This paper represents the development of a high temperature superconducting （HTS） filter, the highest operating temperature of which is up to 93 K. The filter is designed for S band with 4% fractional bandwidth and fabricated using thallium-barium-calcium-copper oxide （TI2Ba2CaCu2O8） thin films. At 93 K, the measurements of the filter show that the insertion loss in the passband is less than 0.22 dB, the return loss is better than 20 dB, and the out-of-band rejection is more than 80 dB. The analysis on the characteristics of the filter operating at different temperatures shows that the filter can work well at temperatures around 90 K. The temperature of 93 K is the highest among the previous reports for HTS filters. The result reported in this paper is significant for HTS filters to be used in the field of microwave communication requiring high sensitivity.     

基于分支线加载的紧凑微带双通带滤波器设计

提出了一种紧凑的零度馈电的具有分支线加载的具有3个传输零点的微带双带通滤波器。首先完成了中心频率2．4 GHz的微带单带通滤波器设计,再次完成了加载分支线的优化仿真设计,最终实现了2．4／3．5 GHz微带双通带滤波器,实测和仿真结果吻合较好,实测得到了的第一、二通带相对带宽大于5％,第一通带内插损小于1．5dB,第二通带内插损小于3 dB。提出的分支加载的微带双带通滤波器具有设计简单、结构紧凑、很好的选择性等优点,可以满足无线局域网（WLAN）系统和固定无线接入（FWA）通信需要。     

L波段微带线交叉耦合发夹带通滤波器设计

随着现代移动通信的迅速发展,无线电频谱越来越拥挤,这就使滤波器变得愈发的重要,对滤波器的要求也越来越严格。本文主要设计了一种以发夹滤波器与交叉耦合滤波器为理论基础的L波段微带带通滤波器,以增强滤波器带外抑制能力和降低寄生通带的影响,从而提高窄带滤波器的性能。利用ADS和HFSS,设计了L波段滤波器,并制作了滤波器实物,实测其通带频率范围7.8-8.7GHz,带内插损3.25dB,带外抑制性能均大于21.5dB,所设计的带通滤波器各项性能均优于设计指标。     

Space qualification mechanical tests of HTS filters for satellite application

High performance high-temperature superconducting （HTS） filters have been designed and constructed for satellite application. The filters are actually a superconducting integration of an 8-pole band-pass filter with an adjustable band-stop filter onto a single piece of LaAIO3 substrate （with dimension of 0.5x45x20 mm3）. Typical results of the filters, i.e., Filters A （made by YBCO） ＆ B （made by TBCCO） will be reported. The measured responses of Filter A showed excellent specifications, e.g., an insertion loss less than 0.1 dB, a return loss better than -22.5 dB in pass-band, band-edge steepness greater than 12 dB/MHz and out-of-band rejection at a certain band deeper than -110 dB. To satisfy the requirement of rocket launch and space operation, three filters of the above design have undergone mechanical environmental simulation tests for space qualification. Detailed analysis of the response curves of Filter B measured before and after the tests showed that no noticeable change in the performance can be found. All the filters passed the rigorous ground simulation tests, which is the first time in China for HTS devices and provided a solid foundation for satellite applications of high-temperature superconductors in the near future.     

UWB射频滤波器设计与分析

分析超宽带(UWB)无线通信技术特点,进而探讨UWB射频滤波器在该系统中的作用.采用半波长耦合微带线接联的方法及发夹型结构对UWB滤波器进行设计,并分析其特性,实验结果与计算机仿真基本一致,可为UWB带通滤波器的分析和设计提供进一步研究的依据.     

一种新型交叉耦合微带滤波器的设计

文章通过对当前一种先进微带滤波器进行等效电路分析,并进行多方位的仿真和拟合计算,最终设计出6阶高选择性微带滤波器,理论分析和全波仿真结果近似一致;该滤波器不仅尺寸小,而且通带性能好,带外抑制度高;可广泛应用于平面电路中,在MMIC、超导技术等先进电路中也有很高的使用价值。     

Parallel-coupled linear-phase superconducting filter

A novel double coupling planar structure （a single microstrip line coupled with two resonators coincidental） is presented for the first time. Based on this structure, a six-pole parallel-coupled high-temperature superconducting band-pass filter with both linear phase response and quasi-elliptic function response is designed. The filter has a 40 MHz pass-band with a center frequency of 2,000 MHz. Its dimension is 18.67 mm × 25.96 mm. At 77 K, minimum insertion loss is 0.26 dB in passband. The group delay variation is 〈3 ns over 70 % of the filter bandwidth.     

基于缺陷地波导结构的双模带通滤波器设计

提出了一种新型的基于缺陷地波导(DGW)结构的双模带通滤波器设计。该滤波器由一对双T型微带输入/输出馈线和一个方形DGW双模谐振器构成。通过在DGW谐振器对称面上引入容性微扰,使谐振器的两个简并模分离,从而产生良好的双模带通椭圆形响应特性。对新型DGW结构单元进行研究,分析了微扰结构的尺寸对滤波器传输特性的影响,设计并加工了一个DGW双模带通滤波器,仿真及测试结果吻合较好。     

悬置微带交指带通滤波器的CAD设计

本文采用直线法对悬置微带交指带违滤波器（ＳＭＩＢＰＦ）做准静态分析，得出了电路和几何尺寸与静态多数之间的关泰然后结合Ｐｏｗｅｌｌ优化，编制出设计ＳＭＩＢＰＦ的通用程序，并制作了一个Ｓ波段窄带带通法波器，获得了满意的测试结果。可作为小型化通信设备中的收、发双工滤波器。     

A 23 GHz high-temperature superconducting microstrip filter for radio astronomy

This paper reports a 6-pole high-temperature superconducting （HTS） microstrip bandpass filter for radio astronomy applications. The filter has a center frequency of 23 GHz and a bandwidth the 2 GHz. We have made many efforts, such as adopting 0.25-mm-thick substrate, carefully designing the housing box and filter layout, to solve the problems in realizing a K-band planar filter. A special straight-line half-wavelength resonator （center-widen resonator） was also designed to reduce the insertion loss of the filter. The measured results showed a midband insertion loss of 0.11 dB with a ripple of 0.4 dB, and a return loss better than 11.5 dB. Good agreement was obtained between simulated and measured results.     

Design of high temperature superconducting contiguous-band diplexer

A high temperature superconducting (HTS) contiguous-band diplexer was designed and fabricated. The HTS contiguous-band diplexer was made using 2-inch-diameter LaA1O₃ wafers coated with epitaxial thin film YBO on both sides, and was made up of two 4-pole singly-terminated low-pass prototype bandpass channel filters connected in parallel. Its operation frequency was centered at 3.25GHz and 3.75GHz with 500-MHz-wide channels. The HTS diplexer operated at 77 K shows excellent performance. The insertion loss in the pass-band is less than 0.8 dB and the rejection between per channel is greater than 30dB. In comparison with the conventional diplexer, the HTS diplexer offers more than 2dB improvement in insertion loss performance and 3/4 volume reduction. This design concept can be applied to the design of HTS multiplexer and the future HTS ESM channeliser systems.     

一种基于耦合矩阵的新型带通滤波器

提出一种新型的具有2个传输零点的微带带通滤波器(bandpass filter, BPF).该滤波器采用2个新型慢波谐振器,具有较宽的上阻带带宽.该滤波器设计简单,由于利用"N+2”耦合矩阵的方法而呈现出较高的频率选择性.测量结果表明,该滤波器具有良好的响应特性,在中心频率2.4 GHz处的插入损耗为1.66 dB,上阻带频率达到7.0 GHz.实测和仿真结果具有良好的一致性.     

一种用于UWB接收端的带通滤波器分析与设计

采用0.18 μm工艺设计1个用于UWB接收端的4阶切比雪夫有源RC带通滤波器.给出1种有损积分器直流增益补偿策略,从而减小滤波器对运算放大器直流增益的要求.同时,采用1种数控电阻的方式实现通带增益的调节.仿真结果表明:所设计的滤波器在通带增益为0dB时,通带纹波增益为0.112 dB,下-3 dB频率为156 kHz,上-3 dB频率为259 MHz,带宽为258.844 MHz;频率为500 MHz处的信号衰减为28.25 dB,频率为792MHz处的信号衰减为45.16dB,完全符合UWB接收端对带通滤波器的性能指标要求.     

一种基于耦合矩阵的微带线带通滤波器的设计方法

提出了一种微带线带通滤波器的分步式设计方法，首先根据电性能指标得出耦合矩阵，然后采用谐振器、电耦合以及磁耦合等不同结构实现耦合矩阵的各个单元．该方法可直接综合出对称特性、非对称特性类椭圆函数滤波器的耦合矩阵，不仅适用于微带类椭圆函数滤波器的设计，也可应用到同轴腔、圆柱腔等形式滤波器的设计中．设计并研制了一台S波段180MHz带宽的6阶微带类椭圆函数滤波器，带内损耗起伏小于2．5dB，1957MHz及2327MHz处的抑制大于55dB，测试结果与设计值吻合较好，证实方法简单有效．     

高温超导滤波器研制

设计并制作了中心频率为2 007.5MH z,带宽为15MH z的6阶T l2B a2C aCu2O8高温超导微带滤波器.采用在谐振器之间插入微带条来微调耦合间距的办法,提高了设计的精确度.实测结果表明滤波器的最小插入损耗为0.25 dB,带外抑制约60 dB,带内波纹为0.16 dB,中心频率、带宽以及边带陡峭度等都与仿真结果吻合较好,验证了设计与制作的一致性.     

A microwave ceramic band-pass filter for mobile communications with new coupling structure

A surface mounted device (SMD) microwave ceramic band-pass filter for mobile communication with a new coupling structure is reported in this paper. In this filter, the external and internal coupling structures are fabricated on an alumina substrate and both resonators and coupling structures are placed into a metal house to cut off its radiation. The relationship between the coupling structures and the performance of filter is analyzed by high frequency structure software (HFSS) and the filter with the center frequency of 836.5 MHz, the bandwith of 40.0 MHz, the pass-band ripple of 0.1 dB and the insertion loss of 1.5 dB has been successfully designed and fabricated. The measured results show a good agreement with the simulation results. Foundation item: Supported by Sino-British Excellent Youth Scholar Foundation (2005362) and the Natural Science Foundation of Hubei Province (2008CDB315)     

C波段三截面阶梯阻抗(SIR)滤波器的设计

SIR滤波器有尺寸小,成本低,易于集成和寄生通带可调节等特点,在微波电路中有着广泛的应用。文中根据项目的需求对SIR滤波器的小型化和寄生通带调节进行研究,通过HFSS仿真软件设计了一个三截面SIR滤波器,中心频率为7.0 GHz,带宽为6.5～7.5 GHz,带内插损优于1.5 dB,在4.0 GHz和9.0 GHz处抑制度大于55 dB。该滤波器结构充分利用空间,比经典发夹型缩小近20。调节寄生通带的变量增加,调节更加灵活,仿真显示在带宽的二倍谐波处抑制度优于35 dB。     

一种频带可调的RF MEMS开关微波滤波器设计

将RF MEMS技术应用于集总模型,设计了一个基于RF MEMS开关控制通频带的微波滤波器。该滤波器的通频带可在3.43 GHz—6.39 GHz和6.81 GHz—10.57 GHz之间切换,等效于一个滤波器实现了两个或者多个滤波器的功能,同时又可充当电路的开关。相对于传统带通滤波器,基于MEMS技术,该滤波器具备便携化、小型化和多功能化等特点,尤其是更易于系统集成。仿真结果还表明,在通频带内传输系数低于-0.5 dB,该滤波器可应用于超高频通讯系统。