国内金刚石绳锯

阐述了金刚石绳锯的基本组成、工作原理、金刚石串珠绳的结构以及金刚石串珠的类型，通过对我国几种主要金刚石绳锯的介绍，总结了国内金刚石绳锯和串珠制造形式的发展现状，分析了目前我国金刚石绳锯发展的不足，展望了其发展趋势以及广阔的应用前景。     

金刚石线锯超声振动切割SiC锯切力的实验研究

在建立金刚石线锯普通切割SiC各锯切参数与锯切力关系的基础上,研究了振动切割中各参数对锯切力的影响机理和锯丝磨损对SiC切割表面质量的影响,并采用单因素进行锯切参数对锯切力和SiC切割表面形貌的试验研究。结果表明:同等条件下,超声振动切割比普通锯切的平均主锯切力明显减小;相对于锯切速度和工件转速,工件进给速度对锯切力的影响更为明显;增大振幅直接扩大了介于工具-工件间的动态容屑空间,有利于排屑。正确选择锯切工艺参数尤其是进给速度和振幅,对锯切力和动态容屑空间的平衡至关重要。     

金刚石圆盘锯与砂锯的切割效率及成本对比分析

金刚石圆盘锯和砂锯都是石材切割的主要设备。本文主要是对这两种设备的特点、生产效率和生产成本进行对比分析。总结了这两种设备各自的使用条件和范围,为石材切割设备的合理选型提供了依据。     

圆锯片用金刚石受热强度损失试验分析

根据热压烧结理论,通过实验,系统分析研究了一定工艺条件下,金刚石受温度影响强度损失的情况,得出烧结温度对金刚石强度的影响大于焊接温度对金刚石强度的影响,为工具制造中合理选用金刚石的强度提供参考。     

Quantitative Analysis of the Loads Acting on the Abrasive Grits in the Diamond Sawing of Granites

An experimental study was carried out to quantitati ve ly evaluate the loads acting on the diamond grits during circular sawing of two kinds of typical granite with diamond segmented saw blade. Measurements were mad e of the horizontal and vertical force components and the consumed power in order to obtain the tangential and the normal force components. The temperatures at the diamond-granite contact zone were measured using a foil thermocouple. T he measurement, together with the net sawing power, was...     

金刚石锯片的激光焊接

研究了激光焊接工艺参数对金刚石锯片焊接质量和焊缝成分组织及性能的影响．结果表明,激光功率、焊速、离焦量等对焊接质量有影响．焊缝组织由ａ－Ｆｅ和γ-（Ｆｅ,Ｎｉ）涸溶相组成．     

金刚石圆锯片的激光焊接

研究了激光焊接金刚石圆锯片的试验装置,焊接参数,焊缝的金相组织和焊缝的结合强度。     

金刚石小锯片真空烧结技术

通过分析真空状态下金属的露点,得到真空烧结时比较理想的真空状态,并比较了真空烧结也保护气氛烧结后金刚石节块的综合性能。     

Finite Element Analysis of Diamond Saw Blades to Prevent Steel Base Wear

The FEM analysis of stress and deformation of steel base of the special diamond saw blades are carried out.The small carbide round segments are welded on the side of blades in order to increase the side wear re sistance of blade.Comparing with conventional saw blade,the maximum stress val ues of reasonable special saw blade are reduced respectively about 17 % 33%,and the maximum deformation values are reduced respectively about 26" D.7%in thetangential(X),radial(Y)and axial(Z)direction.The stress co...     

Research on a New Type of Diamond Saw Plate

With the developing of stone material, diamond saw pl ate is used widely, and in order to increase cutting efficiency and life-span o f diamond saw plate, there are a lot of research jobs of segment for diamond saw plate. Layered segment for diamond saw plate is to divide single segment into s everal cutting tools by its structure, then increases rock-cutting faces. For i mpregnated man-made diamond saw plate, the bonding strength of diamonds with ma trix material has great effect on its life and service....     

类摆线压缩机转子受力分析

介绍了一种新型的回转式压缩机——类摆线压缩机定子型线、转子型线的创成及工作原理；并对其关键部件--转子的受力进行了比较详细的分析，提出了转子惯性离心力S，容积腔气压差所产生的合力Fg及其作用于转子上的合力矩MFg的计算方法；提出了相位内齿轮所受中心外齿轮作用力上及其力矩Mfr偏心轴颈作用于偏心轴承的正压力Nf的计算方法；并提出了转子与定子的接触正压力Nl、N2和N3的计算方法；据此：对某厂正在研制的100，000cal／h(116．667kw)，制冷工质R22的样机的转子受力进行了计算，并根据Hooke线接触润滑状态图，计算出定转子间最小油膜厚度为0．745μm。     

计入摩擦力和惯性力的三叉式万向联轴器受力分析

针对工程实际,对同时计入摩擦力和惯性力作用下的三叉式万向联轴器的受力提出了一种分析模型.利用此模型建立了既简单又实用的三叉式联轴器的力学表达式,并结合实例对这种联轴器的受力进行了数值分析.力分析的结果可为轴承的设计提供理论依据和参考,其简化的计算公式为工程计算提供了方便.