Biological aspects on the cultures of the entomophthoralean fungus<Emphasis Type="Italic">Pandora delphacis</Emphasis> grown on broomcorn millets

Among entomopathogenic fungi the Entomophthor- ales plays an important role in natural control of insect pests through induction of epizootics in insect popula-tions[1—3]. Since most species of the fungal group are 4 - characteristic with their special capability of actively dis-charging conidia to favor infection and dissemination in host populations, they are ideal targets for epizootiologi-cal study, being considered as important microbial control agents. Currently, 66 species …     

中国富硒谷子产业现状及发展方向

为明确中国富硒地区、谷子主产区以及富硒谷子产品的现状,采用数据统计、文献资料、网络资源、专家访谈、实地调研等方式取得数据资料,对中国富硒地区、谷子主产区、富硒谷子产品等资料进行整理、分析,筛选出适合不同区域生产的富硒谷子品种,指出了富硒谷子产业的发展方向,为提高中国富硒谷子产业化水平提供借鉴。     

不同摄入量小米对小鼠肠道菌群和短链脂肪酸的影响

摄入一定量杂粮可降低一些慢性代谢疾病的发病率,但目前杂粮摄入量没有统一的标准,尚不清楚杂粮摄入过多是否会对健康产生不良影响。以小米添加量为20%、40%、60%、80%的饲料喂养3周龄C57BL/6J小鼠,持续12周,采用自动血生化分析仪、16S rRNA高通量基因测序、气相色谱-质谱联用仪分析了不同摄入量小米对小鼠血脂水平、肠道菌群和粪便短链脂肪酸的影响。结果发现,80%摄入量的小米显著增加了小鼠血清的总胆固醇、高密度脂蛋白胆固醇和低密度脂蛋白胆固醇的水平,同时增加了肠道丙酸、丁酸、异丁酸和戊酸的含量。肠道菌群分析结果表明,所有小米干预组的拟杆菌门(Bacteroidota)、Muribaculaceae的丰度上升,厚壁菌门(Firmicutes)、放线菌门(Actinobacteriota)、乳杆菌科(Lactobacillaceae)、双歧杆菌属 (Bifidobacterium)的丰度下降。摄入不同添加量小米的小鼠肠道菌群组成具有较大差异,其中20%小米摄入量组的小鼠菌群中显著富集了另枝菌属(Alistipes)、副拟杆菌属(Parabacteroides)、肠杆菌属(Enterorhabdus),而80%摄入量小米显著降低了小鼠菌群中的粪杆菌属(Faecalibaculum)、布劳特氏菌属(Blautia)和罗氏菌属(Roseburia)的丰度。研究结果表明,20%摄入量的小米就能有效调节小鼠肠道菌群,而过高摄入量(80%)的小米使小鼠血脂水平升高,降低了肠道菌群的多样性和均匀度以及有益菌的丰度,所以要理性看待杂粮的营养价值,避免过量摄入。     

小米蛋白的营养消化性研究

采用体外模拟消化法分别对小米乳、小米醇提蛋白、小米分离蛋白进行营养消化性分析.研究发现,与对照大豆乳相比,小米乳中的蛋白质表现出较低的消化率,仅为35.2％.其中,小米蛋白主要成分之一醇溶蛋白是导致小蛋白消化率较低的主要原因.醇溶蛋白本身形成的二硫键以及其强烈的疏水性是导致其不被消化的关键因素.     

Plant crop remains from the outer burial pit of the Han Yangling Mausoleum and their significance to Early Western Han agriculture

A large amount of carbonized plant remains were discovered in one of the outer burial pits of the Han Yangling Mausoleum, which was built more than 2000 years ago for the Jing Emperor, Liu, Qi (188―141 cal a BC), the fourth emperor of the Western Han Dynasty. The remains are identified by phytolith analysis and macrofossil morphological features. Seeds from foxtail millet (Setaria italica), broomcorn millet (Panicum miliaceum), rice (Oryza sativa) and chenopod (possible Chenopodium giganteum) are identified...     

基于非对称场流分离技术研究直链/支链比值对小米淀粉退化行为的影响

退化是淀粉糊化后分子链重排的过程,为了探究直链/支链比值对淀粉退化的影响,本文采用碱性甘油超声提取小米淀粉中直链淀粉,通过非对称场流分离技术、差示扫描量热法、傅里叶变换红外光谱、扫描电子显微镜、X线衍射法,对3种不同直链/支链比值的小米淀粉的颗粒形貌、晶体结构、结晶度、糊化特性、退化行为进行了表征.实验结果表明,碱性甘...     

Plant microremains provide direct evidence for the functions of stone knives from the Lajia site,northwestern China

A large number of stone knives have been recovered from Neolithic archaeological sites in East Asia. However, direct evidence regarding the functions of the stone knives has been scarce, and hence, their functions have remained controversial. In this study, we recovered and analysed ancient starch grains and phytoliths from residues adhering to stone knives excavated from the Lajia site, Qinghai Province, northwest China, thus providing direct evidence for the functions of the knives. Our anal- yses were based on the following： （1） an assemblage of 278 identifiable starch grains, representing grains from the stems of foxtail millet （Setaria italica） and broomcorn millet （Panicum miliaceum） （65.1% of the total） and the stems of Hordeum and Triticum species （3.6 % of the total）, and （2） an assemblage of 361 identifiable phytoliths, the majority of which were from the stems and leaves of plants such as Panicoideae and related taxa （96 % of the total）. Our study demonstrates that one of the functions of the stone knives was the harvesting crops. In addition, a few starch grains from food legumes and roots （3.4 % of the total） indicate that the stone knives were also likely used to process, peel and cut some foods.     

Starch grain evidence reveals early pottery function cooking plant foods in North China

Early pottery sherds excavated in northern China date back to more than 11,000 cal a BP, and are presumed to have been used as cooking vessels. There has been, however, no direct evidence to demonstrate this function. Here we report ancient starch grains recovered from carbonized residues adhering to the bases of flat- bottomed vessels excavated from the Zhuannian site dating more than 10,000 cal a BP in the North China Plain. This evidence demonstrates that early pottery was being used to cook cereal grains, particularly millets, and acorns. Because millets were in the process of domestication at thistime, we propose that pottery invention in northern China may have been related to early farming activities.     

小米原味茶加工过程中营养成分的分析测定

基于小米原味茶在加工过程中营养成分发生多种变化的现象,设计了小米原味茶的加工方法,并利用气质联用技术分析该过程中营养成分的变化,得到了良好的分析结果.     

Effect of sintering temperature on phase evolution of Al_(86)Ni_6Y_(4.5)Co_2La_(1.5) bulk amorphous composites synthesized via mechanical alloying and spark plasma sintering

Al_(86)Ni_6Y_(4.5)Co_2La_(1.5) amorphous powders were synthesized by mechanical alloying for 200 h. Subsequent consolidation was performed via spark plasma sintering in the temperature range of 250 ℃ to 500 ℃ at the pressure of 500 MPa. The role of viscous flow on densification was investigated by studying the viscosity change of the amorphous phase at different consolidation temperatures. The decrease in viscosity at higher sintering temperatures resulted in better particle bonding and densification of consolidated samples. The formation of only FCC Al was observed in the consolidated samples at sintering temperatures ≤ 300 ℃ and the intermetallic phases formed at temperatures ≥ 400 ℃. The mechanical properties of the bulk samples were measured by Vickers microhardness and nanoindentation tests. The testing results showed that the average values of microhardness, nanohardness and elastic modulus of the sample consolidated at 500 ℃ were 3.06 ± 0.14 GPa,4.85 ± 1.14 GPa and 89.53 ± 9.25 GPa, respectively. The increase in hardness and elastic modulus of the higher temperature consolidated samples is attributed to the improvement in particle bonding, densification and distribution of various hard intermetallic phases in the amorphous matrix.     

Carbon sequestration within millet phytoliths from dry-farming of crops in China

Phytoliths are noncrystalline minerals that form inside cells and cell walls of different parts of plants. Organic carbon in living cells can be occluded in phytoliths during plant growth. It has been documented that the occluded carbon within phytoliths is an important long-term terrestrial carbon reservoir that has a major role in the global carbon cycle. Common millet and foxtail millet have become typical dry-farming crops in China since the Neolithic Age. The study of carbon conservation within phytoliths in these crops could provide insights into anthropogenic influences on the carbon cycle. In this study, we analyzed the carbon content in phytoliths of common millet and foxtail millet. The results indicated that (1) common millet and foxtail millet contained 0.136% ± 0.070% and 0.129% ± 0.085% phytolith-occluded carbon (PhytOC) on a dry mass basis, respectively; (2) based on the mean annual production of common millet and foxtail millet in the last 10 years, the phytolith occluded carbon accumulation rate of common millet and foxtail millet was approximately 0.023 ± 0.015 and 0.020 ± 0.010 t CO 2 ha 1 a 1 , respectively; (3) assuming a similar phytolith occluded carbon accumulation rate as for common millet (the highest accumulation rate was 0.038 t CO 2 ha 1 a 1 ), this could result in the sequestration of 2.37 × 10 6 t CO 2 per year for the 62.4 × 10 6 ha dry-farming crops in China. Although there was a decline in the annual production rate and planting area of foxtail millet during 1949 to 2008, the total phytolith carbon sequestration rate was 7×10 6 t CO 2 within the 60-year period. However, phytolith occluded carbon has not yet been fully considered as a global carbon sink. Also, this carbon fraction is probably one of the best candidates for the missing carbon sink.     

Modulation structure stability of heat-treated Co/C and CoN/CN soft X-ray multilayers

Modulation structure stability of Co/C and CoN/CN soft X ray multilayers has been investigated by X ray diffraction and Raman spectroscopy. The graphitization of the amorphous carbon layers in Co/C multilayers causes a period expansion of 12% at annealing temperatures below 400℃. An enormous period expansion (～40%) induced by the crystallization and agglomeration of Co layers has been observed at 500℃. While the period expansion of CoN/CN multilayers is only 4% at 400℃. The interface pattern of the CoN/CN multilayers still exists even if they were annealed at 700℃. The relatively good thermal stability of CoN/CN multilayers can be attributed to the suppression of the formation of the sp 3 bonding and, at annealing temperatures higher than the phase transition temperature of 420℃ (from hcp to fcc), the coexistence of hcp and fcc Co structures through doping nitrogen.     

Chronic stress induced proliferation and activation of mast cells of gastric antrum in rats

To explore chronic eration and activation of mast heterotypic stressors induced prolifcells in gastric antrum mucosa by ultrastructure alterations of mast cells, chronic unpredictable heterotypic stressors were used as a study model. The mean immunofluorescence magnitude of mast cell protease 1 （MCP-1） taken from chronic stress rats were 37.4±7.7, significantly higher （p〈0.05） than the value of normal control group （24.8±5.6）. Chronic unpredictable haterotypic stressors appeared also to induce ultrastructure alterations of mast cells. It indicated that mast cells were proliferated and activated, while mast cell granules were hyperplasiaed. Most granules had obvious intragranular changes with loss of electron-dense material. The morphologic evidence showed that macrophages and leukocytes infiltrated in chronic stress rats. Some granules of leukocytes adhered to the surface of mast cell, and formed a bridge. Macrophages phagocytized the mast cell granules.     

淀粉多晶体系的亚微晶结构研究

通过对淀凝胶,预糊化淀粉以及不同状态的玉米原淀粉颗粒的广角X射线衍射研究,提出了在淀多晶体系中存在大量的介于微晶和非晶之间的亚微晶结构,同时明确了这三种结构在X射线衍射曲线中的对应区域,从而进一步揭示了[人颗粒结构的实质。     

Early agricultural development and environmental effects in the Neolithic Longdong basin （eastern Gansu）

Neolithic agricultural development and environmental effects in the Longdong area were reconstructed using a synthetic approach, investigating pollen, charcoal, and seed remains for two cultural layer sections and five flotation sites. Results show that Neolithic agriculture in the Longdong area had a simple organization and was dominated by the production of common millet, especially in the early and middle Yangshao age. After the late Yangshao age, Neolithic agriculture developed into a more complex structure, dominated by both common and foxtail millet and the cultivation of rice and soybeans. The production of foxtail millet gradually increased through the Neolithic period, reaching its highest point during the Qijia culture. Soybeans were first cultivated during the late Yangshao culture, approximately 5000 cal a BP. Rice production began no later than 4800 cal a BP, and continued to exist in the Qijia culture, approximately 4000 cal a BP. Agricultural production in Neolithic Longdong, specifically in the “Yuan” area of the loess plateau, developed as a shrub and grass dominated landscape. Vegetation in the river valleys was partly covered with Picea, Tusga, and Quercus coniferous and broadleaf mixed forests. Agricultural activity during the Neolithic period caused an increase in farmland on the loess tableland and a decrease in the abundance of shrub and grassland in the Longdong area. When farmlands were abandoned, vegetation recovered with Hippophae-, Rosaceae-, Ephedra-, and Leguminosae-dominated shrublands and Artemisia-dominated grasslands.     

Correlation between structure and hardness of magnetron sputtering deposited CNx films

Carbon nitride films are deposited on Si (001) substrates by reactive dc magnetron sputtering graphite in a pure N2 discharge. The structure of carbon nitride films has been probed using Fourier transformation infrared, near edge X-ray absorption fine structure (NEXAFS) and high resolution electron microscopy (HREM), and the hardness has been evaluated in nanoin-dentation experiments. FTIR spectra show that N atoms are bound to sp1, sp2, and sp3 hybridized C atoms. C1s NEXAFS spectra show that the intensity of π* resonance is the lowest for the film grown at substrate temperature TS = 350℃, with a turbostratic-like structure and high hardness, while it is the highest for the film grown at TS = 100℃, with an amorphous structure and low hardness. The correlation between the structure and hardness of carbon nitride films has been discussed.     

Specific structural features of LnZrOx (Ln: La, Sm) mixed oxides prepared by different methods

LnZrOx(Ln: La, Sm) mixed oxides of Ln: Zr = 1 were prepared by different methods(complex polymerized method, sorption of cations on starch from aqueous salt solution and conventional co-precipitation with additional redispersion of precipitate by ultra sound) and calcined at 700–1300 °C. Their specific structural features and changes were studied and discussed. Various characterization methods were used such as X-ray diffraction,Electron microscopy, Fourier-transform infrared and Raman spectroscopy, UV–Vis spectroscopy, X-Ray absorption fine structure and X-ray photoelectron spectroscopy.The formation of pyrochlore structure occurred at 1100–1300 °C from fluorite-like pseudocubic phase ZrO_2 regardless the method of preparation. This phase had a block-like structure consisting of ZrO_2 nanocrystals stabilized by Ln cations and residual anions such as hydroxyls and carbonates. The desorption of such anions with heating already started at 900 °C and lead to local changes of Zr cations coordination to octahedral and to the formation of pyrochlore nanodomains inclusions within fluorite-like phase. The increased cation mobility and further elimination of anions caused by further heating was accompanied by the formation of bulk pyrochlore phase at 1100–1300 °C. Even after calcination at 1300 °C the local microheterogeneity as well as defects were identified at domains boundaries or sintered microstructure. These specific features of the formed pyrochlores depend on the method of preparation.     

中国鹅掌楸柱头毛发育的超微结构和物质分泌

<正>作者观察了中国鹅掌楸(Liriodendrom chinense(Hemsl.)Sarg.)柱头毛发育中超微结构的变化并对其分泌物作了定性测定。中国鹅掌楸柱头属湿型柱头,柱头毛由柱头近轴面表皮细胞伸长生长而形成,大多数为单细胞,少数为单列二细胞。柱头毛在发育中细胞器的变化与物质分泌存在相关性。早期,片层状分泌物与粗糙内质网有关,嗜锇小颗粒的出现与线粒体密切相关,而此时,质体尚未发育完善。中、后期的脂类分泌与光滑内质网形成、质体内淀粉消解有关。通过定性测定,早期胞外分泌物的糖类、蛋白和脂类都为负反应,而此后仅脂类显示出强烈正反应。     

Effects of annealing temperature on the microstructure and hardness of TiAlSiN hard coatings

TiAlSiN hard coatings were synthesized on high-speed steel using an arc ion enhanced magnetic sputtering hybrid system.The microstructure and hardness of the coatings at different annealing temperatures were explored by means of XRD,TEM,EDAX and Vickers indentation.The as-deposited TiAlSiN coatings were confirmed to be amorphous due to high depositing rate and low deposition temperature during the film growth.The transformation from amorphous to nanocomposites of nano-crystallites and amorphousness were observed after the annealing treatment,the microstructure of TiAlSiN coatings annealed at 800°C and 1000°C were consisted of crystalline hcp-AlN,fcc-TiN and amorphous phase,however,the coatings were only consisted of fcc-TiN and amorphous phase when annealing at 1100°C and 1200°C.Meanwhile,the formation of Al2O3 was detected on the coating surface after annealing at 1200°C and it indicated the excellent oxidation resistance of the TiAlSiN coatings under the present experimental conditions.Furthermore,the average grain size of the TiAlSiN coatings after high temperature annealing even at 1200°C was less than 30 nm and the size increased with the increasing temperature.However,the hardness of the so-deposited coatings with HV0.2N=3300 dramatically decreased with the increase of temperature and reached nearly to the hardness of TiN coatings with HV0.2N=2300.     

Annealing crystallization and catalytic activity of ultrafine NiB amorphous alloy

Annealing crystallization of ultrafine NiB amorphous alloy prepared by the chemical reduction method was studied by DTA, XRD and XAFS techniques. The XRD and XAFS results have revealed that the crystallization process of ultrafine NiB amorphous alloy proceeds in two steps. First, ultrafine NiB amorphous alloy is crystallized to form metastable nanocrystalline Ni₃B at an annealing temperature of 325℃. Second, the nanocrystalline Ni₃B is further decomposed into crystalline Ni at 380℃ or higher tempera ture, the local structure around Ni atoms in resultant product is similar to that in Ni foil. It was found that the catalytic activity of nanocrystalline Ni₃B for benzene hydrogenation is much higher than that of ultrafine NiB amorphous alloy or crystalline Ni. The result indicates that the active sites of nanocrystalline Ni₃B for benzene hydrogenation are composed of both Ni and B with proper geometry configuration.