Hydrothermal synthesis and photoluminescence behavior of CeO_2 nanowires with the aid of surfactant PVP

<正>Well-crystalline CeO_2 nanowires were prepared via a surfactant-assisted hydrothermal process.Reaction temperature and reaction time were changed for the determination of optimal synthesis parameters.The as-obtained products were characterized by X-ray diffraction (XRD),high-resolution transmission electron microscopy(HRTEM),and field emission scanning electron microscopy(FESEM).The results show that single crystal CeO_2 nanowires with high yield and good uniformity can be obtained hydrothermally at 180℃for 12 h with the aid of 2.0 g surfactant(polyvinyl pyrrolidone,PVP).The role of PVP was then discussed and a possible growth mechanism was proposed. Moreover,room temperature photoluminescence(PL) spectra were obtained for these CeO_2 nanowires,which are believed to be related to the abundant defects in these nanostructures.     

Violet/blue photoluminescence from CeO_2 thin film

CeO2 is a rare-earth oxide which has a face centered cubic fluorite crystal structure. It has fine chemical stabil-ity and high dielectrics (e = 26). Its lattice constant has closely matched to silicon and the dismatch is about 0.35%. It is always investigated as insulator material in the silicon-on-insulator (SOI) structures, dielectric mate-rial and the buffer layer between the superconductor Yba2Cu3O7 and the Si substrate[1—6]. Recently, the PL of CeO2 was studied by many groups. The…     

Tribological properties of La2O3 and CeO2 doped CoCrW coatings deposited by supersonic plasma spraying

A novel supersonic plasma spraying was used to prepare rare earth oxides doped CoCrW coatings. X-ray diffractometer, contact surface profiler, hardness tester, micro-friction and -wear tester and en- vironmental scanning electron microscope equipped with energy dispersive X-ray spectroscopy were employed to investigate the phase structure, surface morphology, microhardness, friction and wear properties of the sprayed coatings. The results show that rare earth oxide doped coatings have high microhardness and excellent tribological properties. Furthermore, the friction and wear mechanisms of sprayed coatings are also discussed.     

Static synthesis of high-quality MCM-22 zeolite with high SiO2／Al2O3 ratio

We demonstrate a synthesis method to broaden the range of SiO2/Al2O3 ratio (30-100) of high-silica MCM-22 zeolites by prolonging the aging time of the gel before the crystallization. The synthesis conditions such as silica sources, chemical compositions of initial gel and aging time of gel were investigated in detail.High quality MCM-22 products with various morphologies have been synthesized by optimize their synthesis conditions.Our results show that increasing of the aging time can make the gel be homogenization and promote their nucleus formation,which may avoid the formation of impurity phase and thus broaden the range of SiO2/Al2O3 ratio.     

Selective formation of tetrahedral Pt nanocrystals from K2PtCl6／PVP

Tetrahedral platinum (Pt) nanocrystals (3-8 nm) are synthesized in high selectivity (ca. 80%) from hydrogen reduction of aqueous K2PtCI6 by using polyvinylpyr-rolidone (PVP: Mw≈360000) as a protector. Morphology (TEM) measurements of the metal colloids and UV-Vis absorption of the colloidal solution are employed to monitor the tetrahedron formation during the syntheses with varying K2PtCl6/PVP ratios. The results clearly show a two-stage process for the selective formation of tetrahedral nanocrystals. Rapid nucleation and crystal formation at the early stage result in round-like crystallites and the external facet evolution in thereafter slow crystal growth leads selectively to the formation of the tetrahedrons.     

Cathodic behavior of molten CaCl<Subscript>2</Subscript>-CaO and CaCl<Subscript>2</Subscript>-NaCl-CaO

The cathodic behavior of molten CaCl₂, CaCl₂-CaO and equimolar CaCl₂-NaCl-CaO was studied by cyclic voltammograms and constant potential polarization at temperatures of 1123 to 1173 K on molybdenum and titanium electrodes. The diffusion coefficient of Ca²⁺ (CaO) in molten CaCl₂-CaO was calculated from the linear relationship between the square root of scan rate and the peak current density. The deposition potentials and the potential temperature coefficient of CaO in molten CaCl₂-0.5mol%CaO and CaCl₂-NaCl-0.5mol%CaO were also obtained from their cyclic voltammograms. The result shows that CaO is more easily reduced than CaCl₂. The addition of NaCl in molten CaCl₂-CaO induces the underpotential electrodeposition of CaO.     

Preparation and radar-absorbing properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiO<Subscript>2</Subscript>/Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/Yb<Subscript>2</Subscript>O<Subscript>3</Subscript> composite powder

Al₂O₃/TiO₂/Fe₂O₃/Yb₂O₃ composite powder was synthesized via the sol-gel method. The structure, morphology, and radar-absorption properties of the composite powder were characterized by transmission electron microscopy, X-ray diffraction analysis and RF impedance analysis. The results show that two types of particles exist in the composite powder. One is irregular flakes (100-200 nm) and the other is spherical Al₂O₃ particles (smaller than 80 nm). Electromagnetic wave attenuation is mostly achieved by dielectric loss. The maximum value of the dissipation factor reaches 0.76 (at 15.68 GHz) in the frequency range of 2-18 GHz. The electromagnetic absorption of waves covers 2-18 GHz with the matching thicknesses of 1.5-4.5 mm. The absorption peak shifts to the lower-frequency area with increasing matching thickness. The effective absorption band covers the frequency range of 2.16-9.76 GHz, and the maximum absorption peak reaches -20.18 dB with a matching thickness of 3.5 mm at a frequency of 3.52 GHz.     

Intense laser induced field ionization of C<Subscript>2</Subscript>H<Subscript>2</Subscript>, C<Subscript>2</Subscript>H<Subscript>4</Subscript>, and C<Subscript>2</Subscript>H<Subscript>6</Subscript>

Using HOMO Field Ionization Model, the tunneling probabilities and the theoretical threshold intensities of the field ionizations of acetylene, ethylene, and ethane in intense laser field are calculated. C2H2, C2H4, and C2H6 were irradiated by 800 nm, 100 fs laser pulses with the intensity range of 10^13-10^14 W/cm^2. A TOF-mass spectrometer was coupled to the laser system and used to experimentally investigate the field ionization of these molecules. The experimental ionization threshold intensities are obtained. The calculating results of the three molecules agree well with the experimental results, indicating that HOMO Field Ionization Model is valid for the ionization of polyatomic molecules in intense laser field.     

Synthesis, Characterization and Calorimetry of Ni（C4H8N2O3）2Cl2

A coordination complex was synthesized from NiCl2 and dipeptide glycylglycine（GG）. It was characterized by element analysis, NMR and TG methods, and then was determined to be Ni（C4HsN2O3）2Cl2. Using an isoperibolic reaction calorimeter, the standard molar enthalpy of formation of Ni（GG）2Cl2（solid） has been determined to be -（1 674.66±2.02） kJ · mol^-1 at 298.15 K.     

Shear-thinning behavior of the CaO-SiO2-CaF2-Si3N4 system mold flux and its practical application

Satisfying the mold-flux performance requirements for high-speed continuous casting necessitates the development of a new non-Newtonian-fluid mold flux with shear-thinning behavior, i.e., a mold flux whose viscosity is relatively high under lower shear rates and relatively low under higher shear rates. In this work, a mold flux that exhibits shear-thinning behavior was developed by adding different amounts of Si₃N₄ to the CaO-SiO₂-CaF₂ mold flux. The shear-thinning behavior was investigated using a rotational viscometer. In addition, the microstructure of the newly prepared slags was studied by high-temperature Raman spectroscopy and X-ray photoelectron spectroscopy. The results showed that the mechanism of shear-thinning was attributable to a temporary viscosity loss caused by the one-way shear stress, whereas the corresponding magnitude of shear-thinning was closely related to the degree of polymerization (DP). Finally, the non-Newtonian fluid mold flux was used for laboratory casting tests, which revealed that the mold flux could reduce slag entrapment and positively affect the continuous casting optimization.     

Effect of the synthesis route on the structural and dielectric properties of SrBi<Subscript>1.8</Subscript>Y<Subscript>0.2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>9</Subscript> ceramics

This work is devoted to the synthesis and characterization of yttrium-doped SrBi₂Nb₂O₉ ceramics prepared by three methods: solid state reaction, co-precipitation, and hydrothermal. Multiple characterizations, specifically scanning electron microscopy (SEM), X-ray powder diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR), were used to validate the structural feature. The crystallite size was estimated by Scherrer’s formula and the Williamson–Hall plot. The effect of the process on the band intensities of the FTIR spectra was investigated. The crystallite size and microstructure of ceramics prepared from different synthesis processes were strongly influenced by the sinterability. SEM images revealed nanograin ceramics for materials prepared by co-precipitation and hydrothermal methods and micrograin ceramics prepared by the solid state method. The synthesized compounds underwent phase transitions at 480–465°C. The dielectric and electrical properties of these Y-doped SrBi₂Nb₂O₉ ceramics appear to be dependent on the grain size.     

Effect of Al2O3 and Y2O3 on the corrosion behavior of ZrO2-benzotriazole nanostructured coatings applied on AA2024 via a sol-gel method

zirconia-based nanostructured coatings were deposited on AA2024 to improve the corrosion resistance properties. Three different nanostructured coatings, namely, zirconia-benzotriazole, zirconia-alumina-benzotriazole, and zirconia-yttria-benzotriazole, were applied on AA2024 via a sol-gel method using the dip-coating technique. Next, the coatings were annealed at 150℃ after each dipping period. The phases and morphologies of the coatings were investigated using grazing incidence X-ray diffraction (GIXRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), and atomic force microscopy (AFM). The corrosion properties were evaluated using electrochemical methods, including polarization and electrochemical impedance techniques in 3.5wt% NaCl solution. The obtained results confirm the formation of homogeneous and crack free zirconia-benzotriazole-based nanostructured coatings. The average roughness values for zirconia-benzotriazole, zirconia-alumina-benzotriazole, and zirconia-yttria-benzotriazole nanostructured coatings were 30, 8, and 6 nm, respectively. The presence of alumina as a stabilizer on zirconia coating was found to have a beneficial impact on the stability of the corrosion resistance for different immersion times. In fact, the addition of alumina resulted in the dominance of the healing behavior in competition with the corrosion process of zirconia-benzotriazole nanostructured coating.     

Dissolution of Al<Subscript>2</Subscript>TiO<Subscript>5</Subscript> inclusions in CaO-SiO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> slags at 1823 K

Al-Ti-O inclusions always clog submerged nozzles in Ti-bearing Al-killed steel. A typical synthesized Al₂TiO₅ inclusion was immersed in a CaO-SiO₂-Al₂O₃ molten slag for different durations at 1823 K. The Al₂TiO₅ dissolution paths and mechanism were revealed by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Decreased amounts of Ti and Al and increased amounts of Si and Ca at the dissolution boundary prove that inclusion dissolution and slag penetration simultaneously occur. SiO₂ diffuses or penetrates the inclusion more quickly than CaO, as indicated by the w(CaO)/w(SiO₂) value in the reaction region. A liquid product (containing 0.7–1.2 w(CaO)/w(SiO₂), 15wt%–20wt% Al₂O₃, and 5wt%–15wt% TiO₂) forms on the inclusion surface when Al₂TiO₅ is dissolved in the slag. Al₂TiO₅ initially dissolves faster than the diffusion rate of the liquid product toward the bulk slag. With increasing reaction time, the boundary reaches its largest distance, the Al₂TiO₅ dissolution rate equals the liquid product diffusion rate, and the dissolution process remains stable until the inclusion is completely dissolved.     

Fabrication of porous alumina templates with a large-scale tunable interpore distance in a H<Subscript>2</Subscript>C<Subscript>2</Subscript>O<Subscript>4</Subscript>-C<Subscript>2</Subscript>H<Subscript>5</Subscript>OH-H<Subscript>2</Subscript>O solution

Highly ordered porous alumina templates with a large-scale tunable interpore distance （100-445 nm） have been successfully fabricated under an electric field of 40-180 V by modifying oxalic acid solution with adequate alcohol. The results under our experimental conditions show that the phenomena of burning and breakdown during the high-field anodization process can be avoided by adding a proper amount of alcohol to the oxalic acid solution. An excellent linear relationship between interpore distance and anodization voltage is obtained under 40-170 V, and the maximum anodization voltage that could be used to avoid burning and breakdown is 180 V.     

Mineral-phase evolution and sintering behavior of MO-SiO2-Al2O3-B2O3 (M=Ca,Ba) glass-ceramics by low-temperature liquid-phase sintering

In this work, network former SiO₂ and network intermediate Al₂O₃ were introduced into typical low-melting binary compositions CaO·B₂O₃, CaO·2B₂O₃, and BaO·B₂O₃ via an aqueous solid-state suspension milling route. Accordingly, multiple-phase aluminosilicate glass-ceramics were directly obtained via liquid-phase sintering at temperatures below 950℃. On the basis of liquid-phase sintering theory, mineral-phase evolutions and glass-phase formations were systematically investigated in a wide MO-SiO₂-Al₂O₃-B₂O₃ (M=Ca, Ba) composition range. The results indicate that major mineral phases of the aluminosilicate glass-ceramics are Al₂₀B₄O₃₆, CaAl₂Si₂O₈, and BaAl₂Si₂O₈ and that the glass-ceramic materials are characterized by dense microstructures and excellent dielectric properties.     

Chemical quenching and inhibition of positronium in Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

The pore structure of Cr2O3/Al2O3 catalysts and the surface chemical properties of these pores were characterized by positron lifetime and coincidence Doppler broadening (CDB) measurements. Four lifetime components could be resolved from the positron lifetime spectrum, with two long lifetime components and two short lifetime components. The two long lifetimes τ4 and τ3 are attributed to ortho-positronium (o-Ps) annihilation in large pores and microvoids, respectively. With increasing Cr2O3 content, both τ4 and its intensity I4 show sharp decrease, while τ3 and its intensity I3 keep nearly unchanged. The Doppler broadening S parameters also show sharp decrease with increasing Cr2O3 content. Detailed analysis of the CDB spectrum reveals that the parapositronium (p-Ps) intensity also decreases with increasing Cr2O3 content. This indicates that the change of o-Ps lifetime τ4 is due to the chemical quenching by Cr2O3 but not spin-conversion of positronium. The decrease of o-Ps intensity I4 indicates that Cr2O3 also inhibits positronium formation.     

Preparation of In<Subscript>2</Subscript>S<Subscript>3</Subscript> and Cu-Doped In<Subscript>2</Subscript>S<Subscript>3</Subscript> 2D Ultrathin Nanoflakes with Tunable Absorption and Intense Photocurrent Response

We reported an effective method to synthesize In₂S₃ and Cu-doped In₂S₃ two-dimensional ultrathin nanoflakes by the hydrothermal method through tuning the Cu/In molar ratio. The transmission electron microscope images showed that the products had ultrathin flake-like shape with wrinkling and rolling. The X-ray diffraction patterns indicated the crystal phase of nanoflakes was varied from β-In₂S₃ to tetragonal-CuInS₂ as the Cu/In molar ratio was increased. The In₂S₃ nanoflakes exhibited absorption band at 450 nm, while new absorption peaks in turn appeared at 550 nm and 670 nm as the Cu/In molar ratio was increased. In addition, the two-dimensional ultrathin nanoflakes exhibited intense photocurrent response.     

Phase transformation and crystal growth behavior of 8mol% (SmO<Subscript>1.5</Subscript>, GdO<Subscript>1.5</Subscript>, and YO<Subscript>1.5</Subscript>) stabilized ZrO<Subscript>2</Subscript> powders

Nanocrystalline powders of ZrO₂-8mol%SmO_1.5(8SmSZ), ZrO₂-8mol%GdO_1.5 (8GdSZ), and ZrO₂-8mol%YO_1.5(8YSZ) were prepared by a simple reverse-coprecipitation technique. Differential thermal analysis/thermogravimetry (DTA/TG), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Raman spectroscopy, and high-resolution transmission electron microscopy (HRTEM) were used to study the phase transformation and crystal growth behavior. The DTA results showed that the ZrO₂ freeze-dried precipitates crystallized at 529, 465, and 467℃ in the case of 8SmSZ, 8GdSZ, and 8YSZ, respectively. The XRD and Raman results confirmed the presence of tetragonal ZrO₂ when the dried precipitates were calcined in the temperature range from 600 to 1000℃ for 2 h. The crystallite size increased with increasing calcination temperature. The activation energies were calculated as 12.39, 12.45, and 16.59 kJ/mol for 8SmSZ, 8GdSZ, and 8YSZ respectively.     

Synthesis and Magnetic Properties of Spin-Liquid Tb2Ti2O7

Polycrystalline samples of a novel spin-liquid compound Tb2Ti2O7 were prepared by a standard solid-state reaction. X-ray diffraction at room temperature confirms that the synthesized compound of Tb2Ti2O7 is single phase with cubic unit cell constant a0 of 1.015 44 nm. Magnetic susceptibility measurements in the temperature range between 100 and 300 K give an effective moment of 9.44 μB and Curie-Weiss temperature of 12.68 K, respectively, indicating the dominance of antiferromagnetic interactions. However, below 50 K, the magnetic behavior of Tb2Ti2O7 deviates from Curie-Weiss law, whose origin remains suspicion.     

One-pot synthesis of PVP-coated Ni<Subscript>0.6</Subscript>Fe<Subscript>2.4</Subscript>O<Subscript>4</Subscript> nanocrystals

Novel poly(N-vinyl-2-pyrrolidone) (PVP)-coated nickel ferrite nanocrystals were prepared by simultaneously pyrolyzing nickel(II) acetylacetonate (Ni(acac)₂) and iron(III) acetylacetonate (Fe(acac)₃) in N-vinyl-2-pyrrolidone (NVP). The PVP coating was formed in situ through polymerization of NVP. The crystalline structure of the resultant nickel ferrite was analyzed by high-resolution transmission electron microscopy, electron diffraction patterns, and powder X-ray diffraction. In addition, the valence state of Ni and the metal contents of Ni and Fe in different valence states were analyzed by X-ray photoelectron spectroscopy (XPS), atomic absorption and the phenanthroline method. The surface coating layer of PVP and its binding states were characterized by Fourier transform infrared spectroscopy in combination with XPS. Colloidal stability experiments revealed that the nanocrystals could be dispersed well in both phosphate-buffered saline and Dulbecco’s Modified Eagle Medium.