Molecular mechanisms of kinetochore capture by spindle microtubules

For high-fidelity chromosome segregation, kinetochores must be properly captured by spindle microtubules, but the mechanisms underlying initial kinetochore capture have remained elusive. Here we visualized individual kinetochore-microtubule interactions in Saccharomyces cerevisiae by regulating the activity of a centromere. Kinetochores are captured by the side of microtubules extending from spindle poles, and are subsequently transported poleward along them. The microtubule extension from spindle poles requires microtubule plus-end-tracking proteins and the Ran GDP/GTP exchange factor. Distinct kinetochore components are used for kinetochore capture by microtubules and for ensuring subsequent sister kinetochore bi-orientation on the spindle. Kar3, a kinesin-14 family member, is one of the regulators that promote transport of captured kinetochores along microtubules. During such transport, kinetochores ensure that they do not slide off their associated microtubules by facilitating the conversion of microtubule dynamics from shrinkage to growth at the plus ends. This conversion is promoted by the transport of Stu2 from the captured kinetochores to the plus ends of microtubules.     

The Dam1 kinetochore ring complex moves processively on depolymerizing microtubule ends

Chromosomes interact through their kinetochores with microtubule plus ends and they are segregated to the spindle poles as the kinetochore microtubules shorten during anaphase A of mitosis. The molecular natures and identities of coupling proteins that allow microtubule depolymerization to pull chromosomes to poles during anaphase have long remained elusive. In budding yeast, the ten-protein Dam1 complex is a critical microtubule-binding component of the kinetochore that oligomerizes into a 50-nm ring around a microtubule in vitro. Here we show, with the use of a real-time, two-colour fluorescence microscopy assay, that the ring complex moves processively for several micrometres at the ends of depolymerizing microtubules without detaching from the lattice. Electron microscopic analysis of 'end-on views' revealed a 16-fold symmetry of the kinetochore rings. This out-of-register arrangement with respect to the 13-fold microtubule symmetry is consistent with a sliding mechanism based on an electrostatically coupled ring-microtubule interface. The Dam1 ring complex is a molecular device that can translate the force generated by microtubule depolymerization into movement along the lattice to facilitate chromosome segregation.     

The bipolar mitotic kinesin Eg5 moves on both microtubules that it crosslinks

During cell division, mitotic spindles are assembled by microtubule-based motor proteins. The bipolar organization of spindles is essential for proper segregation of chromosomes, and requires plus-end-directed homotetrameric motor proteins of the widely conserved kinesin-5 (BimC) family. Hypotheses for bipolar spindle formation include the 'push-pull mitotic muscle' model, in which kinesin-5 and opposing motor proteins act between overlapping microtubules. However, the precise roles of kinesin-5 during this process are unknown. Here we show that the vertebrate kinesin-5 Eg5 drives the sliding of microtubules depending on their relative orientation. We found in controlled in vitro assays that Eg5 has the remarkable capability of simultaneously moving at approximately 20 nm s(-1) towards the plus-ends of each of the two microtubules it crosslinks. For anti-parallel microtubules, this results in relative sliding at approximately 40 nm s(-1), comparable to spindle pole separation rates in vivo. Furthermore, we found that Eg5 can tether microtubule plus-ends, suggesting an additional microtubule-binding mode for Eg5. Our results demonstrate how members of the kinesin-5 family are likely to function in mitosis, pushing apart interpolar microtubules as well as recruiting microtubules into bundles that are subsequently polarized by relative sliding.     

Dynamics and mechanics of the microtubule plus end

An important function of microtubules is to move cellular structures such as chromosomes, mitotic spindles and other organelles around inside cells. This is achieved by attaching the ends of microtubules to cellular structures; as the microtubules grow and shrink, the structures are pushed or pulled around the cell. How do the ends of microtubules couple to cellular structures, and how does this coupling regulate the stability and distribution of the microtubules? It is now clear that there are at least three properties of a microtubule end: it has alternate structures; it has a biochemical transition defined by GTP hydrolysis; and it forms a distinct target for the binding of specific proteins. These different properties can be unified by thinking of the microtubule as a molecular machine, which switches between growing and shrinking modes. Each mode is associated with a specific end structure on which end-binding proteins can assemble to modulate dynamics and couple the dynamic properties of microtubules to the movement of cellular structures.     

Visualization of the dynamic instability of individual microtubules by dark-field microscopy

It has previously been shown that two populations of microtubules coexist in a dynamically unstable manner in vitro: those in one population elongate while those in the other shorten and finally disappear. This conclusion was based on changes in the number and length distribution of microtubules after dilution of the microtubule solution. Here, we demonstrate directly that growing and shortening populations coexist in steady-state conditions, by visualization of the dynamic behaviour of individual microtubules in vitro by dark-field microscopy. Real-time video recording reveals that both ends of a microtubule exist in either the growing or the shortening phase and alternate quite frequently between the two phases in a stochastic manner. Moreover, growing and shortening ends can coexist on a single microtubule, one end continuing to grow simultaneously with shortening at the other end. We find no correlation in the phase conversion either among individual microtubules or between the two ends of a single microtubule. The two ends of any given microtubule have remarkably different characteristics; the active end grows faster, alternates in phase more frequently and fluctuates in length to a greater extent than the inactive end. Microtubule-associated proteins (MAPs) suppress the phase conversion and stabilize microtubules in the growing phase.     

Reconstitution of a microtubule plus-end tracking system in vitro

The microtubule cytoskeleton is essential to cell morphogenesis. Growing microtubule plus ends have emerged as dynamic regulatory sites in which specialized proteins, called plus-end-binding proteins (+TIPs), bind and regulate the proper functioning of microtubules. However, the molecular mechanism of plus-end association by +TIPs and their ability to track the growing end are not well understood. Here we report the in vitro reconstitution of a minimal plus-end tracking system consisting of the three fission yeast proteins Mal3, Tip1 and the kinesin Tea2. Using time-lapse total internal reflection fluorescence microscopy, we show that the EB1 homologue Mal3 has an enhanced affinity for growing microtubule end structures as opposed to the microtubule lattice. This allows it to track growing microtubule ends autonomously by an end recognition mechanism. In addition, Mal3 acts as a factor that mediates loading of the processive motor Tea2 and its cargo, the Clip170 homologue Tip1, onto the microtubule lattice. The interaction of all three proteins is required for the selective tracking of growing microtubule plus ends by both Tea2 and Tip1. Our results dissect the collective interactions of the constituents of this plus-end tracking system and show how these interactions lead to the emergence of its dynamic behaviour. We expect that such in vitro reconstitutions will also be essential for the mechanistic dissection of other plus-end tracking systems.     

MOR1 is essential for organizing cortical microtubules in plants

Microtubules orchestrate cell division and morphogenesis, but how they disassemble and reappear at different subcellular locations is unknown. Microtubule organizing centres are thought to have an important role, but in higher plants microtubules assemble in ordered configurations even though microtubule organizing centres are inconspicuous or absent. Plant cells generate highly organized microtubule arrays that coordinate mitosis, cytokinesis and expansion. Inhibiting microtubule assembly prevents chromosome separation, blocks cell division and impairs growth polarity. Microtubules are essential for the formation of cell walls, through an array of plasma-membrane-associated cortical microtubules whose control mechanisms are unknown. Using a genetic strategy to identify microtubule organizing factors in Arabidopsis thaliana, we isolated temperature-sensitive mutant alleles of the MICROTUBULE ORGANIZATION 1 (MOR1) gene. Here we show that MOR1 is the plant version of an ancient family of microtubule-associated proteins. Point mutations that substitute single amino-acid residues in an amino-terminal HEAT repeat impart reversible temperature-dependent cortical microtubule disruption, showing that MOR1 is essential for cortical microtubule organization.     

Polewards chromosome movement driven by microtubule depolymerization in vitro

We constructed complexes between isolated chromosomes and microtubules made from purified tubulin to study the movement of chromosomes towards the 'minus' end of microtubules in vitro, a process analogous to the movement of chromosomes towards the pole of the spindle at anaphase of mitosis. Our results show that the energy for this movement is derived solely from microtubule depolymerization, and indicate that anaphase movement of chromosomes is both powered and regulated by microtubule depolymerization at the kinetochore.     

Assembly of microtubules at the tip of growing axons

The growth of axons in the developing nervous system depends on the elongation of the microtubules that form their principal longitudinal structural element. It is not known whether individual microtubules in the axon elongate at their proximal ends, close to the cell body, and then move forward into the lengthening axon, or whether tubulin subunits are transported to the tip of the axon and assembled there onto the free ends of microtubules. The former possibility is supported by studies of slow axonal transport in mature nerves from which it has been deduced that microtubule assembly occurs principally at the neuronal cell body. By contrast, the polarity of microtubules in axons, which have their 'plus' or 'fast-growing' ends distal to the cell body, suggests that assembly occurs at the growing tip, or growth cone, of the axon. We have addressed this question by topically applying Colcemid (N-desacetyl-N-methylcolchicine), and other drugs which alter microtubule stability, to different regions of isolated nerve cells growing in tissue culture. We find that the sensitivity to these drugs is greatest at the growth cone by at least two orders of magnitude, suggesting that this is a major site of microtubule assembly during axonal growth.     

Two mitotic kinesins cooperate to drive sister chromatid separation during anaphase

During anaphase identical sister chromatids separate and move towards opposite poles of the mitotic spindle. In the spindle, kinetochore microtubules have their plus ends embedded in the kinetochore and their minus ends at the spindle pole. Two models have been proposed to account for the movement of chromatids during anaphase. In the 'Pac-Man' model, kinetochores induce the depolymerization of kinetochore microtubules at their plus ends, which allows chromatids to move towards the pole by 'chewing up' microtubule tracks. In the 'poleward flux' model, kinetochores anchor kinetochore microtubules and chromatids are pulled towards the poles through the depolymerization of kinetochore microtubules at the minus ends. Here, we show that two functionally distinct microtubule-destabilizing KinI kinesin enzymes (so named because they possess a kinesin-like ATPase domain positioned internally within the polypeptide) are responsible for normal chromatid-to-pole motion in Drosophila. One of them, KLP59C, is required to depolymerize kinetochore microtubules at their kinetochore-associated plus ends, thereby contributing to chromatid motility through a Pac-Man-based mechanism. The other, KLP10A, is required to depolymerize microtubules at their pole-associated minus ends, thereby moving chromatids by means of poleward flux.     

Assembly dynamics of microtubules at molecular resolution

Microtubules are highly dynamic protein polymers that form a crucial part of the cytoskeleton in all eukaryotic cells. Although microtubules are known to self-assemble from tubulin dimers, information on the assembly dynamics of microtubules has been limited, both in vitro and in vivo, to measurements of average growth and shrinkage rates over several thousands of tubulin subunits. As a result there is a lack of information on the sequence of molecular events that leads to the growth and shrinkage of microtubule ends. Here we use optical tweezers to observe the assembly dynamics of individual microtubules at molecular resolution. We find that microtubules can increase their overall length almost instantaneously by amounts exceeding the size of individual dimers (8 nm). When the microtubule-associated protein XMAP215 (ref. 6) is added, this effect is markedly enhanced and fast increases in length of about 40-60 nm are observed. These observations suggest that small tubulin oligomers are able to add directly to growing microtubules and that XMAP215 speeds up microtubule growth by facilitating the addition of long oligomers. The achievement of molecular resolution on the microtubule assembly process opens the way to direct studies of the molecular mechanism by which the many recently discovered microtubule end-binding proteins regulate microtubule dynamics in living cells.     

Insight into tubulin regulation from a complex with colchicine and a stathmin-like domain

Microtubules are cytoskeletal polymers of tubulin involved in many cellular functions. Their dynamic instability is controlled by numerous compounds and proteins, including colchicine and stathmin family proteins. The way in which microtubule instability is regulated at the molecular level has remained elusive, mainly because of the lack of appropriate structural data. Here, we present the structure, at 3.5 A resolution, of tubulin in complex with colchicine and with the stathmin-like domain (SLD) of RB3. It shows the interaction of RB3-SLD with two tubulin heterodimers in a curved complex capped by the SLD amino-terminal domain, which prevents the incorporation of the complexed tubulin into microtubules. A comparison with the structure of tubulin in protofilaments shows changes in the subunits of tubulin as it switches from its straight conformation to a curved one. These changes correlate with the loss of lateral contacts and provide a rationale for the rapid microtubule depolymerization characteristic of dynamic instability. Moreover, the tubulin-colchicine complex sheds light on the mechanism of colchicine's activity: we show that colchicine binds at a location where it prevents curved tubulin from adopting a straight structure, which inhibits assembly.     

Gamma-tubulin is a centrosomal protein required for cell cycle-dependent microtubule nucleation.

gamma-Tubulin is a newly identified member of the tubulin family whose sequence is highly conserved from yeast to man. This minor microtubule protein is localized to the microtubule organizing centres and a mutation in the gene encoding it produces a microtubuleless mitotic arrest in the filamentous fungus Aspergillus nidulans. Here we investigate the in vivo function of gamma-tubulin in mammalian cells using a synthetic peptide to generate a polyclonal antibody that binds to a highly conserved segment of gamma-tubulin. After microinjection into cultured mammalian cells, immunofluorescence localization revealed that this antibody binds to native centrosomes at all phases of the cell cycle. In the presence of the gamma-tubulin antibody, microtubules fail to regrow into cytoplasmic arrays after depolymerization induced by nocodazole or cold. Furthermore, cells injected immediately before or during mitosis fail to assemble a functional spindle. Thus in vivo gamma-tubulin is required for microtubule nucleation throughout the mammalian cell cycle.     

热处理对HeLa细胞微管影响的研究

目的:用HeLa细胞作模型,研究热处理对肿瘤细胞微管的影响.方法:用不同温度(37°C、、40°C43°C和45°C)经不同时间(1h和2h)水浴处理培养的HeLa细胞后,分别即时用SABC法显示其微管.结果:与37°C相比,40°C处理后的HeLa细胞微管变化不大,43°C处理后,微管开始解聚,并随着作用时间的延长而加剧,45°C处理2h,微管组织中心消失.结论:高温能引起HeLa细胞微管呈现渐进式的解聚变化,微管组织中心具有较强的保护作用.     

Fission yeast mod5p regulates polarized growth through anchoring of tea1p at cell tips

Microtubules have a central role in eukaryotic cell polarity, in part through interactions between microtubule end-binding proteins and the cell cortex. In the fission yeast Schizosaccharomyces pombe, microtubules and the polarity modulator tea1p maintain cylindrical cell shape and strictly antipodal cell growth. The tea1p protein is transported to cell tips by association with growing microtubule plus ends; once at cell tips, tea1p releases from microtubule ends and associates with the cell cortex, where it coordinates polarized growth. Here we describe a cortical protein, mod5p, that regulates the dynamic behaviour of tea1p. In mod5Delta cells, tea1p is efficiently transported on microtubules to cell tips but fails to anchor properly at the cortex and thus fails to accumulate to normal levels. mod5p contains a signal for carboxy-terminal prenylation and in wild-type cells is associated with the plasma membrane at cell tips. However, in tea1Delta cells, although mod5p remains localized to the plasma membrane, mod5p is no longer restricted to the cell tips. We propose that tea1p and mod5p act in a positive-feedback loop in the microtubule-mediated regulation of cell polarity.     

Tension directly stabilizes reconstituted kinetochore-microtubule attachments

Kinetochores are macromolecular machines that couple chromosomes to dynamic microtubule tips during cell division, thereby generating force to segregate the chromosomes. Accurate segregation depends on selective stabilization of correct 'bi-oriented' kinetochore-microtubule attachments, which come under tension as the result of opposing forces exerted by microtubules. Tension is thought to stabilize these bi-oriented attachments indirectly, by suppressing the destabilizing activity of a kinase, Aurora B. However, a complete mechanistic understanding of the role of tension requires reconstitution of kinetochore-microtubule attachments for biochemical and biophysical analyses in vitro. Here we show that native kinetochore particles retaining the majority of kinetochore proteins can be purified from budding yeast and used to reconstitute dynamic microtubule attachments. Individual kinetochore particles maintain load-bearing associations with assembling and disassembling ends of single microtubules for >30?min, providing a close match to the persistent coupling seen in vivo between budding yeast kinetochores and single microtubules. Moreover, tension increases the lifetimes of the reconstituted attachments directly, through a catch bond-like mechanism that does not require Aurora B. On the basis of these findings, we propose that tension selectively stabilizes proper kinetochore-microtubule attachments in vivo through a combination of direct mechanical stabilization and tension-dependent phosphoregulation.     

Fibrillarin redistributes to the spindle poles and partially colocalizes with NuMA during mitosis

Fibrillarin, a major protein in the nucleolus, is known to redistribute during mitosis from the nucleolus to the cytosol, and is related to the dynamics of post-mitotic reassembly of the nucleolus. To better understand the dynamic behavior and the relationship with other cytoplasmic structures, we have now expressed fibrillarin-pDsRed1 fusion protein in HeLa cells. The results showed that a part of fibrillarin was associated with mitotic spindle poles in the mitotic cells. Nocodazole-induced microtubule depolymerization resulted in fibrillarin redistribution throughout the cytoplasm, and removal of nocodazole resulted in relocalization of fibrillarin at the polar region during the mitotic spindles reassembly. In a mitotic cell free system, fibrillarin was found in the center of taxol-induced microtubule asters. Moreover, fibrillarin was found to colocalize with the nuclear mitotic apparatus protein (NuMA) at the poles of mitotic cells. Therefore, it is postulated that the polar redistribution of fibrillarin is mediated by microtubules.     

Microtubules with more than 13 protofilaments in the dividing nuclei of ciliates

Microtubules are largely composed of proteins called tubulins. These are stacked in linear arrays called protofilaments (p). Most microtubules have precisely 13p (ref. 1). The 'incomplete' B and C microtubules (10 or 11p) of cilia, flagella, basal bodies and centrioles are widespread exceptions. Very few examples of 'complete' microtubules with more, or less, than 13p have been found. However, the 'ciliate cell' includes a larger number of highly differentiated types of microtubule arrays than most other cell types. The present study was undertaken to ascertain whether there is variation in p number in two ciliates. In both, all complete cytoplasmic microtubules examined have 13p but microtubules with 13-16p are present in the nucleoplasm of dividing nuclei. These features are probably common to ciliates in general because the free-living hymenostone Paramecium tetraurelia and the parasitic heterotrich Nycotherus ovalis are not closely related in terms of taxonomic criteria or life-style.     

Roles for microtubule and microfilament cytoskeletons in animal cell cytokinesis

Microtubule and microfilament cytoskeletons play key roles in the whole process of cytokinesis. Although a number of hypotheses have been proposed to elucidate the mechanism of cytokinesis by microtubule and actin flament cytoskeletons, many reports are conflicting. In our study,combining the cytoskeletons drug treatments with the time-lapse video technology, we retested the key roles of microtubule and actin filament in cytokinesis. The results showed that depolymerization of microtubules by Nocodazole after the initiation of furrowing would not inhibit the furrow ingression, but obviously decrease the stiffness of daughter cells. Depolymerizing actin filaments by Cytochalasin B before metaphase would inhibit the initiation of furrowing but not chromosome segregation, resulting in the formation of binucleate cells; however, depolymerizing actin fillaments during anaphase would prevent furrowing and lead to the regress of established furrow, also resulting in the formation of binucleate cells. Further, depolymerizing microtubules and actin filaments simultaneously after metaphase would cause the quick regress of the furrow and the formation of binudeate cells. From these results we propose that a successful cytokinesis requires functions and coordination of both the microtubule and actin filament cytoskeletons.Microtubule cytoskeleton may function in the positioning and initiation of cleavage furrow, and the actin filament cytoskeleton may play key roles in the initiation and ingression of the furrow.     

How kinesin waits between steps

Kinesin-1 (conventional kinesin) is a dimeric motor protein that carries cellular cargoes along microtubules by hydrolysing ATP and moving processively in 8-nm steps. The mechanism of processive motility involves the hand-over-hand motion of the two motor domains ('heads'), a process driven by a conformational change in the neck-linker domain of kinesin. However, the 'waiting conformation' of kinesin between steps remains controversial-some models propose that kinesin adopts a one-head-bound intermediate, whereas others suggest that both the kinesin heads are bound to adjacent tubulin subunits. Addressing this question has proved challenging, in part because of a lack of tools to measure structural states of the kinesin dimer as it moves along a microtubule. Here we develop two different single-molecule fluorescence resonance energy transfer (smFRET) sensors to detect whether kinesin is bound to its microtubule track by one or two heads. Our FRET results indicate that, while moving in the presence of saturating ATP, kinesin spends most of its time bound to the microtubule with both heads. However, when nucleotide binding becomes rate-limiting at low ATP concentrations, kinesin waits for ATP in a one-head-bound state and makes brief transitions to a two-head-bound intermediate as it walks along the microtubule. On the basis of these results, we suggest a model for how transitions in the ATPase cycle position the two kinesin heads and drive their hand-over-hand motion.