帕珠沙星分子印迹聚合物结合特性

采用甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了具有高选择性的L-帕珠沙星分子印迹聚合物.印迹聚合物对模板分子的结合量明显高于空白聚合物.通过Scatchard分析研究了聚合物的选择结合性能,结果表明:分子印迹聚合物在识别帕珠沙星分子的过程中存在两类结合位点;用多点结合模型进行计算得到高亲和力的结合位点的离解常数Kd,1和最大表观结合常数Qmax,1分别为23.08 μmol/L和3.65 μmol/g,低亲和力的结合位点的离解常数Kd,2和最大表观结合常数Qmax,2分别为0.43 mmol/L和27.28 μmol/g.实验表明,分子印迹聚合物对模板分子的结合量高于其他类似物,呈现出空白聚合物没有的高选择性.     

(S)-萘普生分子印迹聚合物结合特性及制备中复合物的性能研究

以丙烯酰胺为功能单体，合成了对(S)-萘普生具有高手性选择性的分子印迹聚合物．通过紫外光谱分析了聚合物制备过程中(S)-萘普生与功能单体丙烯酰胺形成的复合物，并用Hyperchem软件模拟其结构．分子印迹聚合物对模板分子的结合量高于其对映异构体，手性分离因子α达1．87．Scatchard分析表明分子印迹聚合物在识别(S)-萘普生分子过程中存在2类结合位点，计算得到高亲和力的结合位点的离解常数Kd．1和最大表观结合常数Qmax.1分别为28．0μmol／L和52．94μmol／g，低亲和力的结合位点的离解常数Kd．2和最大表观结合常数Qmax,2分别为0．489mmol／l和0．122mmol／g．     

利福平分子印迹聚合物微球的制备及性能研究

以聚乙烯醇1735为分散剂、利福平为模板分子、甲基丙烯酸为功能单体、乙二醇二甲基丙烯酸酯为交联剂,用水溶液微悬浮聚合法制备了利福平分子印迹聚合物微球;在水溶液中,利用静态平衡结合法和Scatchard分析法研究了印迹聚合物的结合能力和选择性.结果表明,利福平溶液的浓度范围在5×10-5~1×10-4mol/L内,所制得的印迹聚合物内存在两类不等价的结合位点,根据实验数据计算得到高亲和力结合位点的离解常数和最大表观结合量分别为Kd1=1.08×10-2mg/mL和Qmax1=14.40 mg/g;低亲和力结合位点的离解常数和最大表观结合量分别为Kd2=7.18×10-3mg/mL和Qmax2=12.51 mg/g.结合底物的实验结果表明,利福平分子印迹聚合物微球对利福平呈现出了较高的吸附性能和选择识别特性,能较简便地用于利福平的分离和富集.     

美托洛尔分子印迹聚合物识别性能的研究

采用紫外光引发的分子印迹技术,以美托洛尔为模板,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,成功制备了以美托洛尔(Metoprolol)为模板的分子印迹聚合物.结合底物的实验表明,该聚合物对美托洛尔具有优良的吸附选择性.并通过Scatchard方程研究了印迹聚合物对模板分子的结合特性,结果表明,功能单体甲基丙烯酸与模板分子在自组装过程中通过氢键和离子键形成了2类非等价的结合位点,并计算出2类不同结合位点的离解常数分别为Kd1=2.398×10-4mol/L,Kd2=6.364×10-4mol/L;最大表观结合量Qmax1=58.57μmol/g;Qmax2=86.13 μmol/g;分别为理论吸附量的50.53%和74.31%.     

SBA-15表面S-naproxen分子印迹聚合物微球的合成与分子识别特性

以手性药物左旋萘普生(S-naproxen)为模板分子,四乙烯基吡啶(4-VPy)为功能单体,采用表面印迹法,以介孔材料SBA-15为载体合成了能选择性识别S-naproxen的分子印迹聚合物微球.扫描电镜及孔结构分析结果表明,所合成的分子印迹聚合物微球具有粒径均匀、孔径分布窄、比表面积大等特点;同时扫描电镜、X射线衍射和红外光谱分析结果表明载体表面形成了分子印迹聚合物层,Scatchard分析表明分子印迹聚合物在自组装过程中存在两类结合位点,聚合物高亲和力和低亲和力结合位点的最大表观结合容量分别为Qmax1=2.504μmol/g,Qmax2=16.680μtmol/g;分子印迹聚合物的热力学研究表明,吸附过程可以自发进行.     

三唑醇分子烙印聚合物的吸附特性

实验采用分子烙印技术合成了对农药三唑醇有特异性作用的分子烙印聚合物(molecularly im-printed polymer,MIP).通过平衡吸附实验,评价了其对三唑醇的亲和力和选择性.与非烙印聚合物相比,分子烙印聚合物对三唑醇表现了较强的亲和力;Scatchard分析表明,以甲基丙烯酸为功能单体,以三唑醇为模板的分子烙印聚合物,通过离子作用和氢键作用可形成两类结合位点.用多点结合模型计算两类不同结合位点的离解常数为Kd1=2.80×10-4mol/L,Kd2=9.71×10-3 mol/L.实验表明,该聚合物对三唑醇有高亲和力和选择性,为在生物样品中选择富集三唑醇提供了可能性.     

微球形磺胺嘧啶分子印迹聚合物合成及识别特性

以磺胺嘧啶为模板分子,运用分子印迹技术制备微球形分子印迹聚合物,通过Scatchard模型.求得分子印迹聚合物结合位点的离解常数为8.6μmol/L,最大表观结合量为185.7,μmol/g.分子印迹聚合物的等温吸附线方程符合Longmuir方程.分子印迹聚合物的选择性吸附随着溶剂极性的增加而减小,表明非极性共价键在分子识别中起重要作用.     

二溴荧光黄分子印迹聚合物的合成与性能

以二溴荧光黄为印迹分子,丙烯酰胺为功能单体,季戊四醇三丙烯酸酯为交联剂,制备对二溴荧光黄有较好选择性的印迹聚合物.利用静态平衡结合法和Scatchard分析法研究此印迹聚合物的结合能力和选择性.结果表明,以丙烯酰胺为功能单体的印迹聚合物中形成两类不同的结合位点,计算离解常数分别为6.18×10-4mol/L和Kd2=5.73×10-3mol/L.对比二碘荧光黄和荧光素的结合特性,该印迹聚合物呈现较好的选择性.研究二溴荧光黄在溶液中和聚合物中荧光光谱的变化.     

阿特拉津分子印迹聚合物微球的制备及表征

以阿特拉津（Atrazine）为模板分子,甲基丙烯酸（MAA）为功能单体,乙二醇二甲基丙烯酸酯（EDMA）为交联剂,采用沉淀聚合法制备了粒径约210nm的阿特拉津纳米分子印迹聚合物（MIPs）微球.采用紫外分光光度法确定了模板分子与功能单体的最佳物质的量比为1:4.Scatchard分析表明,分子印迹聚合物纳米微球存在两种不同的结合位点,最大表观吸附量(Q_max)和平衡离解常数（K_d）分别为Q_max1=38.08μg/g,K_d1=0.2489μg/L,Q_max2=310.33μg/g,K_d2=6.6269μg/L.此方法制备的分子印迹聚合物对阿特拉津具有良好的选择性吸附能力.     

复合功能单体法合成氧氟沙星分子印迹材料

以氧氟沙星为模板分子,甲基丙烯酸和2-乙烯基吡啶为复合功能单体,二甲基丙烯酸乙二醇酯为交联剂合成了复合功能单体的印迹聚合物材料.通过静态吸附实验和Scatchard模型分析研究印迹材料对模板分子的吸附容量、特异性和选择性.结果表明:与单一功能单体制备的MIP材料相比,复合单体MIP材料对模板分子及其类似物都存在着较高的吸附容量和更好的选择性.而Scatchard模型证明在MIP复合印迹材料表面存在两种结合方式:一种是呈高选择性亲和力,另一种为弱选择性亲和力.其相应的最大吸附容量分别为48,240μmol/g,在含有20μg/mL氧氟沙星溶液时,复合单体的印迹材料与对应的非印迹材料相比,印迹因子可达到3.20.随后将该材料作为特异性吸附剂结合高效液相色谱对牛奶中痕量的氟喹诺酮进行吸附和检测,取得了理想的重现性(RSD 5.0%)和加标回收率(93.72%～102.14%).     

Markedness and its Interpretation in Language Use

Language markedness is a common phenomenon in languages, and is reflected from hearing, vision and sense, i.e. the variation in the three aspects such as phonology, morphology and semantics. This paper focuses on the interpretation of markedness in language use following the three perspectives, i.e. pragmatic interpretation, psychological interpretation and cognitive interpretation, with an aim to define the function of markedness.     

Lower Paleozoic oil relationships within Williston Basin, Canada

The Williston Basin is a significant petroleum province, containing oil production zones that include the Middle Cambrian to Lower Ordovician, Upper Ordovician, Middle Devonian, Upper Devonian and Mississippian and within the Jurassic and Cretaceous. The oils of the Williston Basin exhibit a wide range of geochemical characteristics defined as "oil families", although the geochemical signature of the Cambrian Deadwood Formation and Lower Ordovician Winnipeg reservoired oils does not match any "oil family". Despite their close stratigraphic proximity, it is evident that the oils of the Lower Palaeozoic within the Williston Basin are distinct. This suggests the presence of a new "oil family" within the Williston Basin. Diagnostic geochemical signatures occur in the gasoline range chromatograms, within saturate fraction gas chromatograms and biomarker fingerprints. However, some of the established criteria and cross-plots that are currently used to segregate oils into distinct genetic families within the basin do not always meet with success, particularly when applied to the Lower Palaeozoic oils of the Deadwood and Winnipeg Formation.     

An Analysis of Catherine＇s Character——Wuthering Heights

Wuthering Heights, Emily Bronte＇s only novel, was published in December of 1847 under the pseudonym Ellis Bell. The book did not gain immediate success, but it is now thought one of the finest novels in the English language. Catherine is the key character of this masterpiece, because everybody and everything center on her though she had a short life. We can understand this masterpiece better if we know Catherine well.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

Features of Women's language

Language is a means of verbal communication. People use language to communicate with each other. In the society, no two speakers are exactly alike in the way of speaking. Some differences are due to age, gender, statue and personality. Above all, gender is one of the obvious reasons. The writer of this paper tries to describe the features of women＇s language from these perspectives： pronunciation, intonation, diction, subjects, grammar and discourse. From the discussion of the features of women＇s language, more attention should be paid to language use in social context. What＇s more, the linguistic phenomena in a speaking community can be understood more thoroughly.     

Design and analysis of generic LBS application developing platform

Location based services is promising due to its novel working style and contents.A software platform is proposed to provide application programs of typical location based services and support new applications developing efficiently. The analysis shows that this scheme is easy implemented, low cost and adapt to all kinds of mobile nework system.     

橡胶颗粒沥青混合料低温抗裂性试验研究

以AC-13级配为基础,将橡胶颗粒代替部分集料掺入混合料中,以低温弯曲试验为评价方法对不同橡胶颗粒掺量下沥青混合料的低温抗裂性进行研究,并引入应变能密度值对混合料的低温抗裂性进行综合评价.试验结果表明:橡胶颗粒沥青混合料试件的破坏微应变均超过2 300,满足冬寒区的技术指标;无论是否掺加橡胶颗粒,随着温度的下降,沥青混合料破坏时的最大弯拉强度增大,弯拉应变降低,劲度模量增大;弯曲应变能密度在胶粒掺量为1%左右时具有较大的弯曲应变能密度值,此时橡胶颗粒沥青混合料具有较好的低温抗裂性.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

低渗透非均质砂岩油藏启动压力梯度研究

理论推导与室内实验相结合,建立了低渗透非均质砂岩油藏启动压力梯度确定方法。首先借助油藏流场与电场相似的原理,推导了非均质砂岩油藏启动压力梯度计算公式。其次基于稳定流实验方法,建立了非均质砂岩油藏启动压力梯度测试方法。结果表明:低渗透非均质砂岩油藏的启动压力梯度确定遵循两个等效原则。平面非均质油藏的启动压力梯度等于各级渗透率段的启动压力梯度关于长度的加权平均;纵向非均质油藏的启动压力梯度等于各渗透率层的启动压力梯度关于渗透率与渗流面积乘积的加权平均。研究成果可用于有效指导低渗透非均质砂岩油藏的合理井距确定,促进该类油藏的高效开发。     

Quantitative trait loci （QTLs） for quality traits related to protein and starch in wheat

Quality traits in wheat （Triticum aestirum L.） were studied by quantitative trait locus （QTL） analysis in a recombinant inbred line （RIL） population, a set of 131 lines derived from Chuan 35050 × Shannong 483 cross （ChSh）. Grains from RILs were assayed for 21 quality traits related to protein and starch. A total of 35 putative QTLs for 19 traits with a single QTL explaining 7.99-40.52% of phenotypic variations were detected on 10 chromosomes, 1D, 2A, 2D, 3B, 3D, 5A, 6A, 6B, 6D, and 7B. The additive effects of 30 QTLs were positive, contributed by Chuan 35050, the remaining 5 QTLs were negative with the additive effect contributed by Shannong 483. For protein traits, 15 QTLs were obtained and most of them were located on chromosomes 1 D, 3B and 6D, while 20 QTLs for starch traits were detected and most of them were located on chromosomes 3D, 6B and 7B. Only 7 QTLs for protein and starch traits were co-located in three regions on chromosomes 1D, 2A and 2D. These protein and starch trait QTLs showed a distinct distribution pattern in certain regions and chromosomes. Twenty-two QTLs were clustered in 6 regions of 5 chromosomes. Two QTL clusters for protein traits were located on chromosomes 1D and 3B, respectively, three clusters for starch traits on chromosomes 3D, 6B and 7B, and one cluster including protein and starch traits on chromosome 1D.