PPY@Fe_3O_4的制备及其磁共振成像和光热性能

通过合理转化残余铁(Fe)在聚吡咯(PPY)纳米粒子原位生产了磁性四氧化三铁(Fe_3O_4)晶体,从而合成PPY@Fe_3O_4纳米粒子.得到的PPY@Fe_3O_4纳米粒子具有突出的横向弛豫时间(T_2)加权磁共振成像(MRI)效果和良好的光热性能,在肿瘤的诊断和治疗中具有良好的应用前景.     

A hybrid hydrogel/textile composite as flame-resistant dress

Currently, the functional and cost-effective flame-resistant textiles(FRTs) are on high demand. However, such FRTs based on general polymer fabrics are always expensive, readily decompose, and their temperatures quickly rise once exposed to thermal environments. Inspired by the large specific heat of water and high decomposition temperature of inorganic substances like SiO_2, this study establishes a simple casting strategy for preparing flameresistant gel/textiles(FR-GTs). The findings showed that active diffusion of aqueous AAM/SiO_2 pre-gel solution into the textile structure enabled the formation of a tough interfacial adhesion between the hydrogel and textiles.The interfacial toughness reached ～272 J/m~2 because the PAAM/SiO_2 nanocomposite hydrogel was filled into textile to form the semi-interpenetrating structure at the interface. The presence of chemical crosslinker(PEGDA)and physical crosslinker(SiO_2) limited the volume expansion of the hydrogel upon swelling. In addition, the PAAM/SiO_2 nanocomposite hydrogel layer prevented burning in high temperature environments(over 100℃),due to the heat dissipation of water during evaporation. This simple strategy provides a guidance towards the fabrication of hybrid hydrogel/textile composites for the applications like household fire resistant materials such as flame-resistant gloves.     

Novel enzymatically crosslinked chitosan hydrogels with free-radical-scavenging property and promoted cellular behaviors under hyperglycemia

The impairment of regenerative processes induced by high blood-glucose level (hyperglycemia) and excessive reactive oxygen species (ROS) contributes to the diabetic complication progression and development. In this study, an injectable, in situ crosslinkable chitosan hydrogel with ROS-scavenging capability was developed by conjugating gallic acid onto the chitosan backbone (CGA). We hypothesized that gallic acid serves as both antioxidant and crosslinking moieties to form hydrogel in situ by means of enzymatic crosslinking with horseradish peroxidase (HRP). The rapid gelation (from 30 s) was observed by vial tilting. The mechanical properties and microstructures of CGA hydrogels can be well controlled by varying the concentrations of H₂O₂. The ROS-scavenging ability of these CGA hydrogels was demonstrated against DPPH radical, hydroxyl radical, and total reducing power. Notably, in an in vitro hyperglycemia environment, CGA hydrogels significantly improved the proliferation and migration of human dermal fibroblast cells, which are closely related to diabetic wound healing. These results suggest that CGA hydrogels have potential as advanced materials for the treatment of diabetes-related diseases via attenuating the excessive ROS production and improving cellular behaviors.     

Rapid and highly effective bacteria-killing by polydopamine/IR780@MnO2–Ti using near-infrared light

Bacterial infections are becoming a serious public health challenge because the abuse of antibiotics worldwide has caused bacterial resistance and the occurrence of superbugs. In this work, a new near-infrared (NIR) photoresponsive coating was constructed on Ti implant material, which was composed of MnO₂, IR780 photosensitizer and polydopamine (PDA). Under the irradiation of 808 nm NIR light, the component of MnO₂ in the coating exhibited high photothermal performance, and IR780 could be stimulated to generate ROS as a photosensitizer. The addition of PDA not only improved the cytocompatibility of the composite coating but also strengthened the light absorption ability of the system. Under the irradiation of 808 nm NIR light for 15 min, the composite coating killed 99.94% Staphylococcus aureus and 99.89% Escherichia coli on Ti plates. This rapid and highly effective bactericidal rate was ascribed to the synergistic effects of photothermal performance and photodynamic effect of the coatings excited by NIR light. Cell culture tests showed that PDA/IR780@MnO₂–Ti had good cytocompatibility due to the excellent biocompatibility of PDA and nanostructured surface. Therefore, this surface system will be a very promising plateform to safely and effectively kill bacteria on biomedical devices and implants in a short time.     

The influence of the nonmagnetic metal spacer Bi, Ag and Cu on the properties of the multilayer films

When a ferromagnetic (FM)/antiferromagnetic (AFM) bilayer is field-cooled below the Neel temperature (TN) of the AF layer, a unidirectional anisotropy is induced in the FM. Exchange bias is one of the phenomena as- sociated with the exchange anisotorpy cr…     

Sprayed Pickering emulsion with high antibacterial activity for wound healing

Effective treatment of wound injuries can prevent infections and promote healing. In this work, a sprayed Pickering emulsion composed of chitosan nanoparticles, tea tree oil and curcumin was formulated. The shear thinning behaviour allowed this Pickering emulsion to spray even with a high viscosity provided by the aqueous phase containing chitosan nanoparticles. Moreover, the Pickering emulsion could recover to the high viscosity after spraying onto the wounds, leading to the long residence time and intimate contact. In addition, the Pickering emulsion provided a carrier to encapsulate the tea tree oil, which caused sustained-release effects and further strengthened tea tree oil's antibacterial activity towards the Gram-negative Escherichia coli (E. coli), Gram-positive Staphylococcus aureus (S. aureus) and Gram-positive methicillin-resistant Staphylococcus aureus (MRSA). Besides, this multi-phase system offered a platform to load with hydrophobic curcumin, leading to better synergistic healing effects. Meanwhile, the Pickering emulsion avoided the irritation and toxicity related to surfactants, which was far safer than the classical emulsion especially when used in the defective skin. All these excellent properties endowed this sprayed Pickering emulsion with promising prospects for wound healing.     

Study on antireflection SiO2 coatings fabricated by layer-by-layer deposition

Multifunctional (poly(diallyldimethyl ammonium chloride)/ sodium poly(4-styrene sulfonate)) _n ((PDDA/PSS) _n ) thin films were fabricated by layer-by-layer assembled on the glass substrate. The monolayer silica nanoparticles were prepared on the (PDDA/PSS) _n films. The SiO₂-polyelectrolyte coatings exhibit antireflection properties with low refractive index (as low as 1.22). Interestingly, wavelengths of maximum transmittance could be well tailored by simply changing the particle size of SiO₂. A maximum transmittance of 97.03% in the visible spectral range is achieved for the particle size of 100 nm SiO₂ films. The coatings also show excellent mechanical stability and good adhesion to substrates. The easy availability of the raw materials and simplicity of the fabrication method for such films might make them be potentially useful for various applications.     

Effect of Fe metal on the growth of silicon oxide nanowires

Silicon oxide (SiO_x) nanowires are generally grown on Si substrate under the catalysis of Au in N₂ atmosphere at elevated temperatures. Because the price of Au metal is quite high, Fe metal is then used to replace a part of Au for catalyzing the growth of SiO_x nanowires. The results show that the Fe film can be used as the diffusion barrier of Au. SiO_x nanowires are grown on Au/Fe/Si substrate at 1030℃. Under the catalysis of Fe/Au, the efficiency for the growth of SiO_x nanowires is promoted.     

SiO2/PSt纳米复合微球的制备

用Stober方法合成了SiO₂/PSt纳米微球, 并对其进行表面改性. 以SiO₂纳米微球为核, 采用乳液聚合法, 合成了SiO₂/PSt纳米复合微球. 该复合微球粒径均匀、 单分散性好. 通过控制反应条件, 可以合成不同大小的复合微球. 对两种微球的形貌、 尺寸、 所携带官能团及表面元素变化情况进行了表征, 讨论了SiO₂纳米微球用量、 乳化剂用量与反应介质配比等因素对SiO₂/PSt纳米复合微球粒径的影响.     

LF精炼过程中SAE8620钢所含MgO复合夹杂物分析

采用非水溶液电解的方法,萃取分离出SAE8620齿轮钢中含MgO复合夹杂物,利用扫描电镜、能谱分析仪对夹杂物的组成、类型和形貌特征进行分析。结果表明,SAE8620齿轮钢在LF精炼过程中,含MgO复合夹杂物中MgO、CaO含量逐渐增加,SiO2含量逐渐减少,Al2O3含量呈先上升后下降的趋势;夹杂物的形貌多不规则,呈块状且棱角分明;夹杂物类型主要为SiO2-Al2O3-MgO、SiO2-MgO、SiO2-Al2O3-CaO-MgO等,此类夹杂物的尺寸较大、熔点较高,直接影响钢材的质量和使用性能。     

Influence of deposition time on the morphology and optical properties of SiO<Subscript>2</Subscript>-ZnO composite photonic crystals

SiO2 photonic crystal were successfully prepared by vertical deposition and then used as a template to fabricate SiO2-ZnO composite photonic crystals on ITO substrates by electrodeposition and subsequent calcination. A number of different deposition times were used. The morphologies of the silica opals and SiO2-ZnO composite photonic crystals were investigated by scanning electron microscopy. It was found that ZnO particles grew randomly on the surfaces of the silica spheres when the deposition time was short. As the deposition time was increased, the ZnO particles grew evenly on the surfaces of the silica spheres so that the interstitial space of the silica template was filled with ZnO particles. Reflectance spectra of the SiO2-ZnO composite crystals revealed that all of the fabricated photonic crystals exhibit a photonic band gap in the normal direction.     

Synthesis of γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/SiO<Subscript>2</Subscript>/Au magnetic composites for immobilization of bovine serum albumin

A method for the two-step synthesis of magnetic composites with a γ-Fe₂O₃ core, silica inner layer and numerous gold nanoparticles supported on the surface of the silica (γ-Fe₂O₃/SiO₂/Au) is described. First, thiol-functionalized γ-Fe₂O₃/SiO₂ composites and gold colloids are prepared by modifying γ-Fe₂O₃/SiO₂ composites with mercaptosilane and reduction of Au³⁺ to Au⁰ with citrate, respectively. Gold nanoparticles are then assembled on the surface of the thiol-functionalized γ-Fe₂O₃/SiO₂ composites to form γFe₂O₃/SiO₂/Au composites. The structure of the composite particles is confirmed by transmission electronic microscopy and powder X-ray diffraction. Immobilization studies with bovine serum albumin (BSA) demonstrate that the γ-Fe₂O₃/SiO₂/Au composites can be used to immobilize BSA, making them useful for biomedical and biological applications.     

Composite polymer electrolyte membranes supported by non-woven fabrics for lithium-ion polymer batteries

Since marketing in 1999, lithium-ion polymer batteryhas attracted great attention with its various merits such aslight weight, high energy density and good safety. Poly-mer electrolyte membrane, the key material for lith-ium-ion polymer battery, greatly influences the electro-chemical performances, and it is always among the fo-cuses of the lithium-ion polymer battery research field toprepare polymer gel electrolyte membranes of high ionicconductivity and good electrochemical stability[1]. …     

Microstructure and oxidation behavior of carbon fiber reinforced SiC composite (Cf/SiC) with Mo–57Si–10B oxidation protection coating

Mo–57Si–10B (at.%) coating was prepared by the spark plasma sintering (SPS) technique on a 2D woven C_f/SiC composite, and the oxidation behavior of the bare and the coated C_f/SiC samples at 1300 ?°C were investigated. The coating was composed of a fine MoSi₂/MoB/SiO₂/Mo₂B₅ out layer and the inner SiO₂ interface layer. The mass gain percentage was approximately 0.25% after oxidation at 1300 ?°C for 100 ?h. The coated C_f/SiC substrate was effectively protected, owing to the rapid formation of the dense and protective borosilicate layer on the coating, the excellent microstructure stability of the coating and the inner SiO₂ interface layer.     

Synthesis and luminescence properties of Ca2SiO4-based red phosphors with Sm3+ doping for white LEDs

Sm³⁺-activated Ca₂SiO₄ red phosphors were prepared by the conventional high-temperature solid-state reaction method, and the effects of sodium (Na⁺) and samarium (Sm³⁺) ions doping concentrations on their crystal structure and luminescent properties were investigated by X-ray diffraction (XRD) and fluorescent spectrofluorometer. XRD patterns demonstrate that a well-crystalline structure forms in the phosphors when they are treated by calcination at 1200°C for 4 h, and the excitation spectra exhibit good absorption in the range between 350 and 420 nm. Under the irradiation of 405 nm near-ultraviolet (NUV) light, the spectra of the phosphors show a main emission peak at 601 nm attributed to the ⁴G_5/2??⁶H_7/2 transition of Sm³⁺ ions, and its intensity is greatly influenced by the concentrations of Sm³⁺ and Na₂CO₃. When the concentrations of Sm³⁺ ions and Na₂CO₃ are 2mol% and 6mol%, respectively, the optimal emission intensity can be obtained. From strong absorption in the near ultraviolet zone, the Na_0.06Sm_0.02Ca_1.92SiO₄ phosphor is a promising red-emitting phosphor for white light emitting diodes (W-LEDs).     

甘草酸二钾护理液皮肤修复作用的研究

目的研究甘草酸二钾护理液及含甘草酸二钾卫生巾对擦伤皮肤的修复作用。方法用SD大鼠,制造皮肤擦伤模型,将动物随机分为阳性对照组、阴性对照组、甘草酸二钾护理液高、中、低剂量组、甘草酸二钾卫生巾组,一定时间后,检测创面愈合率,通过HE染色观察损伤皮肤组织病理学变化。结果造模后第7 d和第14 d护理液高、中剂量组和卫生巾组大鼠的皮肤愈合率和组织学评分与阴性组比较具有统计学意义(P 0.05)。结论甘草酸二钾护理液及含甘草酸二钾卫生巾具有促进皮肤修复的作用。     

La2O3–Al2O3 –SiO2 glass-infiltrated 3Y-TZP all-ceramic composite for the dental restora tive application

The 3 mol% yttria stabilized tetragonal zirconia polycrystals (3Y-TZP) powder had three particle size distributions, while the fine one was lower than 100 nm. The 3Y-TZP compact was prepared by dry-pressing under pressures ranged from 10 to 30 MPa and then presintered at 1250°C for 2 h. The matrix dry-pressed under the pressure of 20 MPa had a porosity of 16.7% and could be easily processed by computer aided design and computer aided manufacturing (CAD/CAM), and which had been infiltrated by the La2O3–Al2O3–SiO2 glass at 1200°C for 4 h. The flexural strength and fracture toughness of the composite were 710.7 MPa and 6.51 MPa m^1/2, respectively. The low shrinkage (0.3%) of the composite can satisfy the net-shape fabrication standard. XRD results illustrated that zirconia in the La2O3–Al2O3–SiO2 glass-infiltrated 3Y-TZP all-ceramic composite was mainly in the tetragonal phase. SEM and EDS results indicated that the pores of the matrix were almost filled by the La2O3–Al2O3 –SiO2 glass     

Competing crystallite size and zinc concentration in silica coated cobalt ferrite nanoparticles

Silica coated(30 wt%) cobalt zinc ferrite(Co1 xZnxFe2O4, x?0, 0.2, 0.3, 0.4, 0.5 and 1) nanoparticles were synthesized by using sol–gel method. Silica acts as a spacer among the nanoparticles to avoid the agglomeration. X-ray diffraction(XRD) reveals the cubic spinel ferrite structure of nanoparticles with crystallite size in the range 37–45 nm. Fourier transform infrared(FTIR) spectroscopy confirmed the formation of spinel ferrite and SiO2. Scanning electron microscopy(SEM) images show that the nanoparticles are nearly spherical and non-agglomerated due to presence of non-magnetic SiO2 surface coating. All these measurements signify that the structural and magnetic properties of Co1 xZnxFe2O4 ferrite nanoparticles strongly depend on Zn concentration and nanoparticle average crystallite size in different Zn concentration regimes.& 2014 Chinese Materials Research Society. Production and hosting by Elsevier B.V. All rights reserved.     

Thermodynamics and phase transformations in the recovery of zinc from willemite

Willemite is a common component of zinc and lead metallurgical slags that, in the absence of effective utilization methods, cause serious environmental problems. To solve this problem and increase zinc recovery, we proposed a novel extraction method of zinc from willemite by calcified roasting followed by leaching in NH₄Cl-NH₃·H₂O solution. The thermodynamics and phase conversion of Zn₂SiO₄ to zinc oxide (ZnO) during calcified roasting with CaO were investigated. The mechanism of mineralogical phase conversion and the effects of the CaO-to-Zn₂SiO₄ mole ratio (n(CaO)/n(Zn₂SiO₄)), roasting temperature, and the roasting time on zinc-bearing phase conversion were experimentally investigated. The results show that Zn₂SiO₄ was first converted to Ca₂ZnSi₂O₇ and then to ZnO. The critical step in extracting zinc from willemite is the conversion of Zn₂SiO₄ to ZnO. The zinc percent leached in the ammonia leaching system rapidly increased because of the gradual complete phase conversion from willemite to ZnO via the calcified roasting process.     

Tricolor white emitting phosphor co-doped with Eu, Dy in SiO2 matrix

A Eu, Dy co-doped SiO2 matrix, white emitting phosphor was prepared by the sol-gel technique. Strong red, green and blue emissions located at 618 nm, 573 nm and 400-550 nm were observed under UV laser excitation at room temperature. Such techniques as FT-IR and TGA-DSC were used to measure the microstructure of the luminescent material. The influence of the preparation techniques on the luminescence property of the Eu, Dy co-doped SiO2 matrix, such as anneal temperature, anneal time, dried atmosphere and the components of the matrix, was systematically studied, and the luminescence mechanism was interpreted. The red emission is the strongest when annealed at 750℃. However, blue emission appears when annealed at 700℃ and is the intensest at 900℃. For the samples dried in vacuum, Eu^3＋ is more easily deoxidized to Eu^2＋ at lower temperatures, because the samples dried in the air compared with that dried in vacuum need higher temperature to form network structures. Only the SA and SAB matrix annealed at 850℃ had blue emission in the four matrices （SA, SAB, SB, S） xerogel and the emission in the SAB matrix was stronger than that in the SA matrix. This may be due to the eutectic phase formed by the oxide boron, alkaline oxide and alumina in the SAB matrix, which constructs network structures and stabilizes the emission center and enhances the blue emission.