Structure evolution of Y2O3 nanoparticle/Fe composite during mechanical milling and annealing

Fe-25 wt% Y2O3composite powders have been fabricated by mechanical milling(MM) Fe powders of 100 μm in diameter and Y2O3nanoparticles in an argon atmosphere for the milling periods of4,8,12,24,36,and 48 h,respectively.The features of these powders were characterized by using X-ray diffraction(XRD),scanning electron microscopy(SEM),electron probe micro analyzer(EPMA) and transmission electron microscopy(TEM).The experimental results showed that the mean particle size and crystalline size of MM powders decreased with the milling time increasing.All the elements distributed homogenously inside the powders after 48 h of MM.The lattice constant of the matrix α-Fe kept constant with the milling time,and no solid solution took place during MM process.After 8 h of MM,the α-Fe in each powder became nanocrystalline.After 48 h of MM,Y2O3changes from nanostructure into amorphous structure,and the crystalline size of α-Fe further decreased to 10 nm.The Y2O3in the powders mechanically milled for 48 h kept the amorphous structure after being annealed at 400 1C,and starts to crystallize when the powders are annealed at 600 1C.The amorphous Y2O3contains a small amount of Fe,and crystalline FeYO3appears at 800 1C.     

Competing crystallite size and zinc concentration in silica coated cobalt ferrite nanoparticles

Silica coated(30 wt%) cobalt zinc ferrite(Co1 xZnxFe2O4, x?0, 0.2, 0.3, 0.4, 0.5 and 1) nanoparticles were synthesized by using sol–gel method. Silica acts as a spacer among the nanoparticles to avoid the agglomeration. X-ray diffraction(XRD) reveals the cubic spinel ferrite structure of nanoparticles with crystallite size in the range 37–45 nm. Fourier transform infrared(FTIR) spectroscopy confirmed the formation of spinel ferrite and SiO2. Scanning electron microscopy(SEM) images show that the nanoparticles are nearly spherical and non-agglomerated due to presence of non-magnetic SiO2 surface coating. All these measurements signify that the structural and magnetic properties of Co1 xZnxFe2O4 ferrite nanoparticles strongly depend on Zn concentration and nanoparticle average crystallite size in different Zn concentration regimes.& 2014 Chinese Materials Research Society. Production and hosting by Elsevier B.V. All rights reserved.     

La2O3–Al2O3 –SiO2 glass-infiltrated 3Y-TZP all-ceramic composite for the dental restora tive application

The 3 mol% yttria stabilized tetragonal zirconia polycrystals (3Y-TZP) powder had three particle size distributions, while the fine one was lower than 100 nm. The 3Y-TZP compact was prepared by dry-pressing under pressures ranged from 10 to 30 MPa and then presintered at 1250°C for 2 h. The matrix dry-pressed under the pressure of 20 MPa had a porosity of 16.7% and could be easily processed by computer aided design and computer aided manufacturing (CAD/CAM), and which had been infiltrated by the La2O3–Al2O3–SiO2 glass at 1200°C for 4 h. The flexural strength and fracture toughness of the composite were 710.7 MPa and 6.51 MPa m^1/2, respectively. The low shrinkage (0.3%) of the composite can satisfy the net-shape fabrication standard. XRD results illustrated that zirconia in the La2O3–Al2O3–SiO2 glass-infiltrated 3Y-TZP all-ceramic composite was mainly in the tetragonal phase. SEM and EDS results indicated that the pores of the matrix were almost filled by the La2O3–Al2O3 –SiO2 glass     

Synthesis, structure, and optical properties of manganese phthalocyanine thin films and nanostructures

Manganese phthalocyanine(MnPc) nanostructures with different morphologies were prepared on porous anodic alumina oxide(AAO) at different substrate temperature(T_S=50 ℃,80 ℃,120 ℃,180 ℃,240 ℃) in an organic molecular beam deposition(OMBD) system.The nanostructures morphologies were studied using scanning electron microscopy(SEM) and the results showed that the nanostructures morphologies could be modulated by the control of T_S,as a result,the continuous film was obtained at 50 ℃,whereas the nanorods(NRs),nanoribbons(NBs),nanowires(NWs),nanosheets(NSs) and nanoparticles(NPs) were facilely generated as T_S increased.At the same time,the density and the uniformity of the nanostructures decreased.The results of X-ray diffraction(XRD) indicated that only the(3-phase polymorph formed throughout the growth process irrelevant to the T_S.Additionally,the ultraviolet visible(UV-Vis) absorption spectra demonstrated that the main absorption bands of MnPc nanostructures showed a remarkable band broadening as the T_S was increased.     

Phase stability and thermal conductivity of ytterbia and yttria co-doped zirconia

Rare earth oxides doping has been extensively investigated as one of the effective methods to lower thermal conductivity of 4.55 mol% Y2O3stabilized ZrO2(YSZ) thermal barrier coatings(TBCs).In the present work,5–6 mol% Yb2O3and Y2O3co-doped ZrO2ceramics were synthesized by solid reaction sintering at 1600 1C.The phase stability of the samples after heat treatment at 1500 1C was investigated.Yb2O3and Y2O3co-doped zirconia,especially when Yb2O3/Y2O3≥1,contained less monoclinic phase than single Yb2O3or Y2O3phase doped zirconia,indicating that co-doped zirconia was more stable at high temperature than YSZ.The thermal conductivity of the 3 mol% Yb2O3+3 mol% Y2O3co-doped ZrO2was 1.8 W m 1K 1at 1000 1C,which was more than 20% lower than that of YSZ.     

Fabrication of anode-supported zirconia thin film electrolyte based core–shell particle structure for intermediate temperature solid oxide fuel cells

With a view to produce intermediate temperature SOFCs,yttria and scandia doped zirconia with a core-shell structure was prepared,then an anode supported fuel cell was fabricated by a spray method.The influences of the scandia content in the electrolyte and atmosphere conditions used in the testing experiments on phase composition,microstructure and fuel cell performance were investigated.The electrolyte was composed of cubic and tetragonal phases and SEM pictures revealed very fine grain sizes and a smooth surface of the electrolyte film,though some defects were observed in samples with high Scandia content.Coating scandia on partially stabilized zirconium particles improves both ionic conductivity of the electrolyte and power density of the fuel cell distinctly below 750 1C.Anodes were pre-sintered at 1200 1C before co-sintering with the electrolyte film to ensure that the shrinkage percentage was close to that of the electrolyte during co-sintering,avoiding warping of cell.     

Self-assemb led array of rect angular single- crystal microtube s of perchlorina ted copper phthalocy anines

The rectangular microtubes array of perchlorinated copper phthalocyanines(G₁₆CuPc),were synthesized by physical vapor deposition technique without using any template or catalyst.The synthesis process of the tubular structure is very simple,easy to control,and a little raw material is used.The morphology and crystal structure of the obtained samples were analyzed by means of scanning and transmission electron microscopy（SEM and TEM）,X-ray diffraction（XRD）,Fourier transform infrared spectroscopy（FT-IR） and X-ray photoelectron spectroscopy（XPS）.The microtubes have an entire hollow interior,open ends with rectangular cross-section,a large interior of 1.4-1.8 urn width,and the thin walls of 80-100 nm.The obtained products exhibit excellent crystalline nature,high chemical and thermodynamic stability,excellent biocompatibility,as well as innocuity.It is believed that these well-defined microtubular structures of an organic material will be used as active materials for solar cells,nanodevices for field emission apparatus,microchannels for biochip and microvessel for drug delivery.     

Properties of garnet-type Li6La3ZrTaO12 solid electrolyte films fabricated by aerosol deposition method

The garnet-type Li_6La_3ZrTaO_(12)(LLZT) solid electrolyte films were fabricated by aerosol deposition(AD)method.Ball-milled LLZT powder with a cubic garnet structure and a particle size of 1-2 urn was used as raw material and deposited directly on a SUS316L or a glass substrate via impact consolidation.As-deposited LLZT film has a cubic garnet structure but contains Li_2CO_3 and La_2Zr_2O_7 phases.SEM observation revealed that the film consists of LLZT particles fractured into submicron size.The impurity phase formation during AD process was caused by the local heating by the collision between LLZT particles and deposition surface and reaction with CO_2.The Li~+ ion conductivity of LLZT film was estimated to be 0.24 × 10~(-5)S cm~(-1) at room temperature.Electronic conductivity of LLZT film was confirmed to be around 10~(-12) S cm~(-1),indicating the dominant Li~+ ion conduction of LLZT film.     

An in vitro evaluation of novel NHA/zircon plasma coating on 316L stainless steel dental implant

The surface characteristics of an implant that influence the speed and strength of osseointegration include crystal structure and bioactivity. The aim of this study was to evaluate the bioactivity of a novel natural hydroxyapatite/zircon(NHA/zircon) nanobiocomposite coating on 316L stainless steel(SS) dental implants soaking in simulated body fluid. A novel NHA/zircon nanobiocomposite was fabricated with 0(control),5, 10, and 15 wt% of zircon in NHA using ball mill for 1 h. The composite mixture was coated on SS implants using a plasma spray method.Scanning electron microscopy(SEM) was used to evaluate surface morphology, and X-ray diffraction(XRD) was used to analyze phase composition and crystallinity(Xc). Further, calcium ion release was measured to evaluate the coated nanobiocomposite samples. The prepared NHA/zircon coating had a nanoscale morphological structure with a mean crystallite size of 30–40 nm in diameter and a bone-like composition,which is similar to that of the biological apatite of a bone. For the prepared NHA powder, high bioactivity was observed owing to the formation of apatite crystals on its surface. Both minimum crystallinity(Xc=41.1%) and maximum bioactivity occurred in the sample containing 10 wt% of zircon because of minimum Xcand maximum biodegradation of the coating sample.     

Structure and properties of solid-state synthesiz ed poly (3,4-propylenedi oxythiophene) /nano-ZnO composite

Poly（3,4-propylenedioxythiophene）/nano-Zinic Oxide（PProDOT/ZnO） composites with the content of 3-7 wt%nano-ZnO were synthesized by the solid-state method with FeCl₃ as oxidant.The structure and morphology of the composites were characterized by Fourier transform infrared（FTIR）spectroscopy,ultraviolet-visible（UV-vis） absorption spectroscopy,X-ray diffraction（XRD） and transmission electron microscopy（TEM）.The electrochemical performances of the composites were investigated by galvanostatic charge-discharge,cyclic voltammetry and electrochemical impedance spectroscopy（EIS）.The photocatalytic activities of the composites were investigated by the degradation of methylene blue（MB） dyes in aqueous medium under UV light irradiation.The results from FTIR and UV-vis spectra showed that the PProDOT/ZnO composites were successfully synthesized by solid-state method,and nano-ZnO had great influences on the conjugation length and oxidation degree of the polymers.Furthermore,the PProDOT/5 wt%ZnO had the highest conjugation and oxidation degree among the composites.The results of XRD analysis indicated that there were some FeCl₄^- ions as doping agent in the PProDOT matrix,and the content of ZnO had no effect on diffraction pattern of PProDOT.Morphological studies revealed that the pure PProDOT and composites had similar morphological structure,and all the composites displayed an irregular sponge like morphology.The results of electrochemical tests showed that the PProDOT/5 wt%ZnO had a higher electrochemical activity with a specific capacitance value of 220 F g^-1 than others.The results from photocatalytic activities of the composites indicated that the PProDOT/5 wt%ZnO had better photocatalytic activity than other composites.     

Facile cathodic electrosynthesis and characterization of iron oxide nano-particles

Fe2O3 nano-particles have been synthesized by simple cathodic electrodeposition from the low-temperature nitrate bath.The morphology and crystal structure of the obtained oxide powder were analyzed by means of scanning and transmission microscopy(SEM and TEM),X-ray diffraction(XRD) and Fourier transform infrared(FTIR) spectroscopy.Thermal behavior and phase transformation during the heat treatment of as-deposited sample were investigated by differential scanning calorimetry(DSC) and thermogramimetric analysis(TGA).The results showed that the deposited Fe2O3 was composed of the nanoparticles with grain size of approximately 10-60 nm.A serious problem during cathodic electrodeposition of iron oxide was splashing of deposit into electrolyte due to its low adhesion.This problem was tackled by reducing the bath temperature and dielectric constant of solvent.     

Size tuning and oxygen plasma induced pore formation on silica nanoparticles

Silica nanoparticles have been prepared from tetraethylorthosilicate dissolved in ethanol followed by base-catalyzed condensation.Earlier works reported that at least four parameters,namely concentrati...     

Preparation and characterization of poly(vinylidene fluoride) composite membranes blended with nano-crystalline cellulose

Poly(vinylidene fluoride) (PVDF) composite membranes blended with nano-crystalline cellulose (NCC) for ultrafiltration were prepared by a Loeb-Sourirajan (L-S) phase inversion process.The effects of NC...     

Densification behavior of mechanically milled Cu–8 at% Cr alloy and its mechanical and electrical properties

Synthesis and consolidation behavior of Cu–8 at%Cr alloy powders made by mechanical alloying with elemental Cu and Cr powders,and subsequently,compressive and electrical properties of the consolidated alloys were studied.Solid solubility of Cr in Cu during milling,and subsequent phase transformations during sintering and heat treatment of sintered components were analyzed using X-ray diffraction,scanning electron microscopy and transmission electron microscopy.The milled powders were compacted applying three different pressures(200 MPa,400 MPa and 600 MPa)and sintered in H2atmosphere at 900 1C for 30 min and at 1000 1C for 1 h and 2 h.The maximum densification(92.8%)was achieved for the sample compacted at 600 MPa and sintered for 1000 1C for 2 h.Hardness and densification behavior further increased for the compacts sintered at 900 1C for 30 min after rolling and annealing process.TEM investigation of the sintered compacts revealed the bimodal distribution of Cu grains with nano-sized Cr and Cr2O3precipitation along the grain boundary as well as in grain interior.Pinning of grain boundaries by the precipitates stabilized the fine grain structure in bimodal distribution.     

Activated carbon derived from rice husk by NaOH activation and its application in supercapacitor

Four activated carbon(AC) samples prepared from rice husk under different activation temperatures have been characterized by N2adsorption–desorption isotherms, thermogravimetric analysis(TGA–DTA), Fourier transform infrared spectroscopy(FTIR) and scanning electron microscopy(SEM). The specific surface area of AC sample reached 2681 m2 g 1under activation temperature of 800 1C. The AC samples were then tested as electrode material; the specific capacitance of the as-prepared activated carbon electrode was found to be 172.3 F g 1using cyclic voltammetry at a scan rate of 5 mV s 1and 198.4 F g 1at current density 1000 mA g 1in the charge/discharge mode.& 2014 Chinese Materials Research Society. Production and hosting by Elsevier B.V. All rights reserved.     

Hot corrosion behavior of nanostructured Gd2O3 doped YSZ thermal barrier coating in presence of Na2SO4 + V 2O5 molten salts

Nickel-based superalloy DZ125 was first sprayed with a NiCrAlY bond coat and followed with a nanostructured 2 mol% Gd_2O_3-4.5 mol% Y_2 O_3-ZrO_2(2 GdYSZ) topcoat using air plasma spraying(APS). Hot corrosion behavior of the as-sprayed thermal barrier coatings(TBCs) were investigated in the presence of 50 wt%Na_2SO_4 + 50 wt% V_2O_5 as the corrosive molten salt at 900 ℃ for 100 h. The analysis results indicate that Gd doped YVO_4 and m-ZrO_2 crystals were formed as corrosion products due to the reaction of the corrosive salts with stabilizers(Y_2O_3, Gd_2O_3) of zirconia. Cross-section morphology shows that a thin layer called TGO was formed at the bond coat/topcoat interface. After hot corrosion test, the proportion of m-ZrO_2 phase in nanostructured 2GdYSZ coating is lower than that of nano-YSZ coating. The result reveals that nanostructured 2GdYSZ coating exhibits a better hot corrosion resistance than nano-YSZ coating.     

Photocatalytic enhancement of Mg-doped ZnO nanocrystals hybridized with reduced graphene oxide sheets

Hybridization of Mg-doped ZnO and reduced graphene oxide(MZO–RGO) were synthesized through one pot reaction process. Crystallization of MZO–RGO upon thermal decomposition of the stearate precursors was investigated by X-ray diffraction technique. XRD studies point toward the particles size with 10–15 nm,which was confirmed by transmittance electronic microscopy,and also indicates that graphene oxide has been directly reduced into its reduced state graphene during the synthesis. Graphene hybridized MZO photocatalyst showed enhanced catalytic activity for the degradation of methylene blue(MB). The degree of photocatalytic activity enhancement strongly depended both on the coverage of graphene on the surface of MZO nanoparticles and the Mg doping concentration. The sample of 2 wt% graphene hybridized 5 at% Mg-doped ZnO showed the highest photocatalytic activity,which remained good photocatalytic activity after nine cycling runs.     

Tubular pure copper grain refining by tube cyclic extrusion–compression (TCEC) as a severe plastic deformation technique

Tube Cyclic Extrusion–Compression(TCEC) method is a novel severe plastic deformation technique developed for grain refining of cylindrical tubes to ultrafine grained(UFG)/nanostructured ones. In this method, tubes are fully constrained and deformed between chamber and mandrel with a small neck zone. The principle of TCEC technique which was adopted to impose severe plastic strains to the tubular materials was explained. Also, the deformation and grain fragmentation mechanism during TCEC was analyzed. The material deformation characteristics during TCEC were numerically simulated by FE code of ABAQUS/Explicit. The FEM results demonstrated that TCEC technique was able to impose extremely high plastic strains. The TCEC method was successfully applied to a commercially pure copper(99.99%) and significant grain refinement was achieved. TEM observation demonstrated the refinement of grains from the initial size of 45 μm to 200–350 nm after four processing cycles of TCEC. Microhardness measurements were carried out across the thickness of the initial and processed tubes. The results show good homogeneity of hardness distribution and an increase to 102 Hv from initial value of 55 Hv after four TCEC cycles. Mechanical properties of the specimens were extracted from tensile tests. The obtained results documented notable increase in the yield and ultimate strengths, whereas the uniform and total elongations decreased. Fracture surfaces after tensile tests were investigated by scanning electron microscopy(SEM), and the observed morphology indicates ductile fracture mode after four cycles of TCEC.     

Effect of Graphene Nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method

In recent years, graphene has attracted considerable research interest in all fields of science due to its unique properties. Its excellent mechanical properties lead it to be used in nano-composites for strength enhancement. This paper reports an Aluminum–Graphene Nanoplatelets(Al/GNPs)composite using a semi-powder method followed by hot extrusion. The effect of GNP nano-particle integration on tensile, compressive and hardness response of Al is investigated in this paper. It is demonstrated that 0.3 wt% Graphene Nanoplatelets distributed homogeneously in the matrix aluminum act as an effective reinforcing filler to prevent deformation. Compared to monolithic aluminum(in tension), Al–0.3 wt% GNPs composite exhibited higher 0.2% yield strength(+14.7%), ultimate tensile strength(+11.1%) and lower failure strain( -40.6%). Surprisingly, compared to monolithic Al(in compression), Al–0.3 wt% GNPs composite exhibited same 0.2% compressive yield strength and lower ultimate compression strength(- 7.8%),and lower failure strain(- 20.2%). The Al–0.3 wt% GNPs composite exhibited higher Vickers hardness compared to monolithic aluminum(+11.8%).Scanning electron microscopy(SEM), Energy-Dispersive X-ray Spectroscopy(EDS) and X-ray diffraction(XRD) were used to investigate the surface morphology, elemental percentage composition, and phase analysis, respectively.     

Zr-pillared montmoril lonite supported cobalt nanoparticles for Fischer – Tropsch synthesis

In this article Fischer–Tropsch(FT) synthesis was studied over cobalt nanoparticles supported on modifed Montmorillonite(Zr-PILC).Co-loaded/Zr-PILC catalysts were synthesized by hydrothermal methods and were characterized by XRD,XRF,BET,H2-TPR,TGA and SEM techniques.FT reactions were carried out in fxed bed microreactor(T 225 1C,260 1C and 275 1C,P 1,5 and 10 bars).The FT-products obtained over Co-loaded/Zr-PILC catalysts showed increased selectivity of C2–C12hydrocarbons and decreased selectivity towards CH4and higher molecular weight hydrocarbons(C21) at a TOS of 2–30 h as compared to the Co-loaded/NaMMT catalysts.With increase in reaction temperature from225 1C to 275 1C,CO-conversion and CH4selectivity increases while that of C5+hydrocarbons decreases.Decrease in CH4selectivity while increase in C5+hydrocarbons and CO-conversion were observed on increasing the pressure of reaction.