Synthesis,structure and catalytic behavior of yttrium complexes bearing a diaminobis（phenolate） ligand

Yttrium complexes stabilized by a diaminobis（phenolate） ligand were synthesized and their catalytic behavior was explored. Reaction of YCI3 with 1 equiv of LNa2 [L= Me2NCH2CH2N{CH2-（2-O-C6H2-^1Bu2-3,5）}2] gave the yttrium chloride LYCI（THF） （1） in 92% yield. Complex I can be used as starting material to prepare the yttrium amido derivative. Complex 1 reacted with 1 equiv of LiNPh2 in THF to afford the expected yttrium amido complex LYNPh2 （2） in high yield. Both of complexes 1 and 2 have been well detected by elemental analysis, NMR spectra and single-crystal X-ray analysis. It was found that complex 2 can efficiently initiate the ring-opening polymerization of L-lactide and ε-caprolactone, and a controlled manner is observed in the former case.     

Synthesis of monosubstituted N-arylamidines by divalent diaminobisphenolate ytterbium complex catalyzed addition of amines to nitriles

Divalent ytterbium complex YbL^（ONNO）（THF）2 （L^（ONNO）= Me2NCH2CH2N（CH2-2-O-3,5-C6H2（^1Bu）2）2） （1） has first been found to serve as a catalyst for addition of amines to nitriles to give monosubstituted N-arylamidine in moderate to good yields. The aromatic amines and nitriles showed better activity. The outcome of the addition reaction was greatly affected by the structure of divalent ytterbium complexes. The reaction mechanism was proposed and the benzonitrile-coordinated divalent ytterbium phenoxide Yb（OAr）2（C6H5CN）（THF）2 （Ar = 2,6-di^tBu-4-MeC6H3） was isolated as one of the intermediates.     

Synthesis,characterization of amine-bridged bis（phenolate） yttrium alkyl complex and its catalytic behavior for the Tishchenko reaction

Reaction of homoleptic yttrium tris-alkyl complex YR3 （R=CH2C6H4NMe2-o） with 1 equivalent of amine bis（phenol）s LH2 （L=Me2NCH2CH2N（CH2-（2-O-C6H2-Bu^t 2-3,5））2） afforded the solvent-free yttrium alkyl complex LYR （1）, which has been characterized with elemental analysis, 1H NMR and IR spectra, and structural determination. The coordination geometry around the center metal atom can be best described as a distorted octahedron. It was found that complex 1 can be used as an efficient catalyst for the Tishchenko reaction.     

Synthesis and properties of a Pr（Ⅲ） complex with 2-acetylbenzimidazoledehyde-glycine Schiff-base ligand

Abstract The 2-acetyl-benzimidazoledehyde-glycine Schiff-base ligand and the corresponding Pr（Ⅲ） complex Pr2L3（NO3）3· 2CH3OH （L=C11H10N3O2） were synthesized in methanol and characterized by a series of methods, including chemical analysis, elemental analysis, TOF-MS, ^1H NMR, UV-, IR-, Raman spectra, thermal analysis, and the three-dimension fluorescence excitation and emission spectra. The Pr（Ⅲ） complex exhibits extraordinary water-solubility and the Pr（Ⅲ） hydroxide appears at pH≥13. The complex also possesses specific fluorescent properties. Thus, at the excitation wavelengths 200.0-280.0 and 260-350 nm the fluorescence bands were observed at 290.0 and 400.0 nm, respectively.     

Three new zinc（Ⅱ） coordination polymers： Modulation of extended structures driven by assistant ligands

Three new complexes, [Zn（dtb）（4,4′-bipy）]·5H2O （1）, [Zn（dtb）（bpp）]·H2O （2） and [Zn（dtb）（phen）2]·CH3- CH2OH·H2O （3） （dtb = 5,5′-dithiobis（2-nitrobenzoic acid）, 4,4′-bipy = 4,4′-bipyridine, bpp = 1,3-bi（4-pyridyl） propane, phen = 1,10-phenanthroline）, have been constructed by dtb ligand and zinc salt in the presence of different assistant N-containing ligands under hydrothermal conditions. The structures of the complexes were established by single-crystal X-ray diffraction analysis. Although compounds 1 and 2 are both 2D networks, the cavities＇ forms and pitch of helix are different. The structure of compound 3 shows a 1D helical chain, and is extended by the supermolecule interactions into a 2D framework. These neutral polymeric complexes exhibit structural and dimensional diversity due to the different coordination modes of the flexible dtb ligand and the effect of assistant ligands.     

Investigation of adsorption of surfactant at the air-water interface with quantum chemistry method

Density functional theory （DFT） of quantum chemistry was used to optimize the configuration of the anionic surfactant complexes CH3（CH2）7OSO3^- （H2O）n （n=0-6） and calculate their molecular frequencies at the B3LYP/6-311＋G^＊ level. The interaction of CH3（CH2）7OSO3^- with 1 to 6 water molecules was investigated at the air-water interface with DFT. The results revealed that the hydration shell was formed in the form of H-bond between the hydrophilic group of CH3（CH2）7OSO3^- and 6 waters. The strength of H-bonds belongs to medium. Binding free energy revealed that the hydration shell was stable. The increase of the number of water molecules will cause increases of the total charge of hydrophilic group and S10-O9-C8 bond angle, but decreases of the alkyl chain length and the bond lengths of S10-O11, S10-O12 as well as S10-O13, respectively.     

Structural diversity and reactivity of d^10 metal- （4-pyridylthio）acetate system

The hydrothermal synthesis and crystal structures of four coordination polymers, namely, 2D [Zn（μ3-ta）（pytaH）]n （1）, 2D [Zn（μ3-pyta）Cl]n （2）, 1D [Cd（μ-pyta）2（H2O）]n （3）, and 3D [Cd（μ3-pyta）（μ-Cl）]n （4） （pyta = （4-pyridylthio）acetate, ta = thioglycolate）, are reported. They are based on （4-pyridylthio）acetate and its derived ligand. The ta^2- ligand present in 1 was generated from an in situ C（sp^2）-S bond cleavage of the pyta ligand. In these compounds, versatile intermolecular interactions, such as close S…S interactions and strong （O-H…O/N/S） or weak （C-H…O/S, C-H…Cl） hydrogen bonding interactions, play an important role in the formation of three-dimensional supramolecular networks in the solid state.     

Development of a new method for analyzing free aluminum ions （Al3＋） in seafood using HPLC-ICP-MS

This paper presents a novel method for simultaneous online examination of free aluminum ions （Al3＋） in seafood, using solid- phase extraction and high-performance liquid chromatography online with inductively coupled plasma mass spectrometry （SPE- HPLC-ICP-MS）, without post-column reaction. The optimum conditions for chromatographic separation of Al3＋ were achieved using an IonPac CS5A analytical column with an IonPac CG5A guard column. The mobile phase consisted of 0.040 mol/L LiOH, 0.0060 mol/L 2,6-pyridinedicarboxylic acid, and 0.090 mol/L CH3COOH （pH 4.7）. The free Al3＋ ions in seafood were extracted by shaking with the mobile phase at 70℃ for 2 h. SPE was conducted using an Oasis MCX, 3cc/60 mg, 30 μm column, which was activated and equilibrated with 2 mL of methanol and 4 mL of deionized water before use. HCl （0.075 mol/L, 2 mL） was used to wash inorganic Al from the SPE column. The standard recoveries of Al3＋ were all above 89% and the relative standard deviations were all below 5%. The proposed method was successfully used for the examination of Al3＋ in seafood samples, and the results were similar to those obtained using the static equilibrium method.     

Lithium bond structures of HnY （n=2, 3; Y=O,S, N）…LiNH2 and the abnormal blue shift of N-Li bond

The optimized geometries of the complexes between HnY （n=2, 3; Y=O, S, N） and LiNH2 have been calculated at the B3LYP/6-311＋＋G^＊＊ and MP2/6-311＋＋G^＊＊ levels. Three stable complexes were obtained. Frequency analysis showed that the enlarged 2N-4Li presents the abnormal blue shift in three complexes. The calculated binding energy with basis set super-position error （BSSE） and zero-point vibrational energy （ZPE） corrections of complex Ⅰ-Ⅲ is -58.65, -31.66 and -69.59 kJ·mol^-1 （MP2）, respectively. Natural bond orbital theory （NBO） analysis has been performed, and the results revealed that the H2O…LiNH2 （complex I） and H3N…LiNH2 （complex Ⅲ） are formed with coexisting σ-s and n-s type lithium bond interactions, complex Ⅱ is formed with ττ-s type lithium bond interaction between HnY （n=2,3; Y=O, N） and LiNH2, and H2S…LiNH2 （complex Ⅱ） is formed with n-s type lithium bond interaction between H2S and LiNH2. Natural resonance theory （NRT） and atom in molecule （AIM） theory have also been studied to investigate the bond order and topological properties of the lithium bond structures.     

Effects of nitrogen sources and glucose on the consumption of ethylene and methane by temperate volcanic forest surface soils

There is limited knowledge with regard to the consumption of ethylene (C2H4) and methane (CH4) in volcanic forest soils containing low microbial carbon-to-organic carbon ratio, and to the responses of both consumptions to nitrogen and carbon additions. Temperate volcanic forest surface soils under three forest stands (e.g. Pinus sylvestris L., Cryptomeria japonica and Quercus serrata) were used to compare CH4 and C2H4 consumption by forest soils, and to study the effects of nitrogen sources and glucose on both consumptions. There was a good parallel between CH4 and C2H4 consumption by for- est soils, but mineralization reduced CH4 consumption rather than C2H4 consumption in forest soils, particularly in a Pinus forest soil. The stimulatory effect of glucose addition on both CH4 and C2H4 consumption by forest soils was increased by increasing the pre-incubation period after glucose addi- tion, and a largest stimulation occurred in the Pinus forest soil. The addition of KNO3-N at the rate of 100 μg·g1 significantly reduced the consumptions of both C2H4 and CH4 by forest soils (P≤0.05). In the presence of urea plus dicyandiamide, the consumption rates of C2H4 and CH4 by forest soils were higher than those in the KNO3-N and urea-N treated soils at the same N rate (P≤0.05), but were similar to those of the control. Hence, under experimental conditions, there was a strong inhibitory effect of NO3 rather than NH4 addition on the CH4 and C2H4 consumption in these forest soils. When amount of the added NO3-N increased up to more than 2―3 times the soil initial NO3-N concentrations, both C2H4 and CH4 consumption rates were reduced to 10%―20% of the rates in soils without nitrate addition. By comparing the three forest stands, it was shown that there was a smallest effective concentration of the added nitrate that could inhibit C2H4 and CH4 consumption in the Pinus forest soil, which indicated that C2H4 and CH4 consumption of the soil was more sensitive to NO3-N addition.     

4-Formyl-2-（2H-benzotriazol-2-yl）-phenol： an ESIPT chromophore

In the present work, excited state intramolecular proton transfer （ESIPT） emission properties of a new benzotriazole derivative 4-formyl-2-（2H-benzotriazol-2-yl）- phenol （C1） were studied. 4-Formyl-2-（2H-benzotriazol-2- yl）-methoxy-benzene （C2）, 4-formyl-2-（2H-benzotriazol-2- yl）-phenyl acetate （C3） and 4-methyl-2-（2H-benzotriazol- 2-yl）-phenol （C4） were used as the reference molecules. ^1H NMR chemical shift of hydroxy group in C1 was located at more down field than that of C4 or p-hydroxy-benzaldehyde （C5）, respectively. C1 showed two absorption bands in the range of 260-400 nm zones in various solvents, while C2 and C3 exhibited single absorption band. The equal molar mixtures of C2/C5 or C3/C5 showed single absorption band. C2 and C3 displayed single fluorescence emission band in various solvents, while C1 exhibited dual emission bands in some strong polar solvents. Furthermore, the second emission band in these strong polar solvents showed the large Stokes shift. The results show that the second emission band of C1 was produced by ESIPT. C2 and C3 could not undergo ESIPT due to no hydroxy group. The geometry optimization calculation of enol and keto forms in the ground and excited states of C1 provided tough theoretical evidences of ESIPT.     

Synthesis and characterization of carbon-bridged bis(phenolate) lanthanum alkoxides and their catalytic behavior for the polymerization of L-lactide

Four lanthanum alkoxides stabilized by a carbon-bridged bis(phenolate) ligand were synthesized and their catalytic behavior for the ring-opening polymerization of L-lactide was explored. Reactions of [(MBMP)LaCp(THF) 2 ] (MBMP 2 = 2,2′-methylene-bis(6-tert-butyl-4-methyl phenoxo)) with HOCH 2 Ph, HOCH 2 CF 3 , HOCH(CH 3 ) 2 , and HOCH 2 CH 2 N(CH 3 ) 2 , respectively, in a 1:1 molar ratio in THF gave the dimeric lanthanum alkoxo complexes [(MBMP)Ln(μ-OR)(THF) 2 ] 2 (OR = OCH 2 Ph(1), OCH 2 CF 3 (2), OCH(CH 3 ) 2 (3), OCH 2 CH 2 N(CH 3 ) 2 (4)]. These complexes were well characterized, and the definitive molecular structure of complex 1 was determined. It was found that complexes 1 to 4 are efficient initiators for the ring-opening polymerization of L-lactide. The structure of the alkoxo groups has a significant effect on the catalytic behavior, and complex 2 can initiate L-lactide polymerization in a controlled manner.     

Synthesis, structure of iron(III)-containing imidazolium salts and their catalytic activity in the alkylation of aryl Grignard reagents

A series of iron(III)-containing imidazolium salts of the general formula [DRim][FeX₄] (R = 2,6-diisopropylphenyl, IPr, X = Cl, 1; R = IPr, X = Br, 2; R = tertbutyl, ^t Bu, X = Cl, 3; R = isopropyl, ⁱ Pr, X = Cl, 4; R = benzyl, Bn, X = Cl, 5; R = Bn, X = Br, 6) have been prepared in high yields via reactions of anhydrous ferric halides with equivalent of the corresponding N,N-dihydrocarby-limidazolium halides, where 2–6 are novel ones. All of the complexes were characterized by elemental analysis, Raman spectroscopy, electrospray ionization mass spectroscopy, and X-ray crystallography for 1 and 2. All of them were non-hygroscopic and air-stable, with four of them existing as solids (1–4) and two as liquids (5 and 6) at room temperature. A preliminary catalytic study on the coupling of 4-tolylmagnesium bromide with cyclohexyl bromide revealed that 1 and 3 possessed the highest activity. In comparison, 2, 4 and 5 exhibited moderate activity and the least active complex was 6.     

Development of Fe(III)-containing ether-functionalized imidazolium ionic liquids for aryl Grignard cross-coupling of alkyl halides

A series of Fe(Ⅲ)-containing imidazolium-based ionic liquids containing ether substituents,including[C3OMim][FeCl4](1,[C3OMim]=1-(2-methoxyethyl)-3-methylimidazolium),[C3OiPim][FeCl4](2,[C3OiPim]=1-isopropyl-3-(2-methoxyethyl)imidazolium),[C3OBim][FeCl4](3,[C3OBim]=1-butyl-3-(2-methoxyethyl)imidazolium),[(C3O)2im][FeCl4](4,[(C3O)2im]=1,3-bis(2-methoxyethyl)imidazolium),[C3OMim][FeBr4](5)and[(C3O)2im][FeBr4](6),were prepared and characterized by elemental analysis,Raman spectroscopy and electrospray ionization mass spectrometry.The catalytic performances of 1–6 and related Fe(III)-based catalysts in the cross-coupling of aryl Grignard reagents with alkyl halides bearing-hydrogens were studied,revealing that mono(ether)functionality improves the catalytic activity and that bis(ether)functionality improves the reusability.After simply decanting the product contained in the ethereal layer,complex 4,which containing bis(ether)-functionalized imidazolium cation,could be successfully recycled seven times.     

Synthesis, spectra, structure and quantum chemistry study on two novel oxovanadium complexes with hydrotris （pyrazolyl） borate ligands

Vanadium is a trace element in lives. Though vana- dium was investigated in life science from 1876, the importance of vanadium in lives was not recognized until 1971[1,2]. Since bromoperoxidase and nitrogenase were found and proved that vanadium plays an …     

Synthesis, structure, optoelectronic properties of novel zinc Schiff-base complexes

Two novel zinc Schiff-base complexes, bis-(N-(2-hydroxybenzidene)-p-aminodimethylaniline)zinc(II) (2) and bis-(N-(2-hydroxy-1-naphthidene)-p-aminodimethylaniline)zinc(II) (4) were designed and synthesized. Both the complexes exhibit good solubility in organic solvents and excellent thermal stabilities. A single crystal of 2 was grown and its crystalline structure was determined from X-ray diffraction data. Analysis of the electronic structures of both the zinc complexes calculated by density functional theory reveals a localization of orbital. The UV-Vis absorption and photoluminescence profiles of 4 in thin film are similar to those of 2, but the emission for 4 is red-shifted compared to 2. Three-layered devices with a configuration of ITO/NPB/2/Alq 3 /LiF/Al and ITO/NPB/4/Alq 3 /LiF/Al show a yellow and red emission, respectively.     

New terpenoids from the roots of Jatropha curcas

Two new sesquiterpenoids,(1S,2R)-dihydroxycycloax-4(15)-ene(1),14-dehydroxyl daucucarotol(2),and one new rhamnofalane diterpenoid,2-hydroxy-3-dehydroxycaniojane(3),together with two known compounds,curcusone D(4) and curcusone C(5),were isolated from the roots of Jatropha curcas.The chemical structures of these compounds were established by chemical methods and extensive 1D-and 2D-NMR spectroscopic data analyses.     

Synthesis and self-assembly of two 1,3-alternate thiacalix[4]arenes derivatives bearing amide groups

Two 1,3-alternate thiacalix[4]arene derivatives bearing amide groups, 1,3-alternate p-tert-butylthiacalix[4]arene tetraamide (4), and 1,3-alternate p-H-thiacalix[4]arene tetraamide (6) were prepared, and their crystal structures were determined by single-crystal X-ray diffraction method. The steric hindrances posed by tert-butyl groups play an important part in the synthesis and the self-assembly of the two compounds. Compound 6 was synthesized from the corresponding ester, which was obtained by the reaction of acid chloride with ammonia. In the crystal structure, compound 4 presents a highly symmetric molecular structure, while for compound 6, because of absence of tert-butyl groups, it presents a more flexible molecular structure.     

An operator on ascent sequences

We solve two problems about ascent sequences: how to get the ascent sequence of the reflection of A with respect to its antidiagonal for a matrix A∈ Intn and its ascent sequences, and how to determine the ascent sequence of A+B for k×k matrices A∈ Intn and B∈ Intm. We give the other definition of ascent sequence and get M-sequence. For the first question, we define M-sequence of A and rewrite the ascent sequences as another form.We build the bijection between M-sequences and ascent sequences and prove that our bijection is well-defined. For the second question, we define an operation on M-sequences. On the basis of the operation and the bijections, we get the ascent sequences of the sum of two matrices.     

A practical process for the synthesis of translocator protein 18kDa imidazopyridine ligand

In this article, an effective feasible method to synthesize translocator protein 18kDa （TSPO） imidazopyridine ligand 7 is discussed. A new procedure for the synthesis of the key intermediate 17 has been developed in four steps （condensation, diazo reaction, hydrolysis, amidation） from 2-aminopyridine 18. The overall yield was increased from 18% to 31.6%. One of the key steps is using activated copper powder as a catalyst in several cycles. Finally, reduction of 17 with Zn dust completed the synthesis of TSPO imidazopyridine ligand 7 in 86% yield.