Rh/Ti3C2Tx MXene催化剂用于氨硼烷催化产氢

二维过渡金属碳/氮化合物基（MXene）催化剂对于水解产氢反应具有优异的催化活性.以二维过渡金属碳化钛（Ti₃C₂T_x MXene）材料为载体,采用原位还原法,制备了超高分散度的二维Ti₃C₂T_x MXene材料担载的金属铑（Rh）催化剂（Rh/Ti₃C₂T_x MXene）.利用单层二维Ti₃C₂T_x MXene材料高度暴露的表面,实现了Rh亚纳米团簇的高度分散.在常压的温和条件下,将制得的Rh/Ti₃C₂T_x MXene催化剂用于氨硼烷的常温分解.在35℃,0.1 MPa的条件下,氨硼烷可以在3 min内完全实现氢气（H₂）的释放.催化剂的结构表征证明：Rh亚纳米团簇的平均尺寸约为0.66 nm.构效关系研究表明：二维Ti₃C₂T_x MXene载体表面高度暴露的碳钛键（C-Ti）结构可以起到锚定和高度分散Rh亚纳米团簇的作用.     

锰氧化物改性分子筛的制备及其在含酚废水处理中的应用

根据催化氧化原理,利用4A分子筛为载体,次氯酸钠（NaClO）为氧化剂,通过硫酸锰（MnSO₄）在其表面的原位氧化来制备对环境无害的锰氧化物（MnO_x）改性的分子筛（MnO_x@MS）材料.通过场发射扫描电镜（FE-SEM）和X射线衍射（XRD）对材料进行了表征.XRD分析表明：Mn元素是以MnO_x形式存在,在pH为7.2时,反应得到的MnO_x中Mn离子的价态最高.测试表明：Mn离子的价态越高对含酚废水的处理效果就越好.采用在最优条件下得到的MnO_x@MS材料作为催化剂,对过氧化氢（H₂O₂）氧化降解含酚废水进行研究,考察了不同体系、温度、pH值和H₂O₂用量对苯酚降解的影响.结果表明：在优化的降解条件下,120 min内,未改性分子筛对苯酚的去除率仅为35%,而MnO_x@MS改性材料对苯酚的去除率达到82%,说明通过MnO_x改性后的分子筛,对苯酚的氧化降解能力大大提高.     

带隙可调铌酸钾基铁电薄膜制备与物性研究

以钡镍元素共掺形成的铌酸钾-铌镍酸钡薄膜（1-x）KNbO₃-xBaNi_0.5Nb_0.5O_3-δ（KN-xBNNO）为主要研究对象，围绕其材料发展趋势：高质量铌酸钾-铌镍酸钡薄膜材料的关键制备技术、铌酸钾-铌镍酸钡薄膜的微结构、元素化合价和拉曼声子模式等内容进行了研究.     

NaBH4还原改性TiO2(B)及光催化性能研究

以TiCl₄为原料,在（CH₂OH）₂溶液中通过一步水热法制备单斜相二氧化钛[TiO₂(B)]。使用不同质量含量NaBH₄对TiO₂(B)进行还原改性,调控其内含Ti³⁺的浓度,合成了含Ti³⁺的TiO₂(B)-NaBH₄X样品。采用X射线衍射仪（X-ray diffraction,XRD）、拉曼光谱仪（Raman spectroscopy）、紫外-可见漫反射光谱仪（UV-visible diffuse reflectance spectroscopy,UV-DRS）、X射线光电子能谱仪(X-ray photoelectron spectroscopy,XPS）对材料进行表征。改性后TiO₂(B)-NaBH₄X样品保持其原有晶体结构,并未发生相变,仅有结晶度的改变。原始TiO₂(B)禁带宽度为3.15 eV,通过改性,Ti³⁺的存在改变了禁带宽度,成功地将禁带宽度降低到2.82 eV,将吸光区域扩展到可见光区域。通过可见光光催化分解水制氢与可见光降解甲基橙试验,确立了TiO₂(B)-NaBH₄3样品有最好的可见光光催化活性,产氢速率达到0.58 μmol·h^-1·g^-1,6 h降解率达到40%。     

模板法制备CexZr1-xO2及催化餐饮废油合成生物柴油

以松木为模板,使用模板法制备了不同铈锆含量的Ce_xZr_1-xO₂复合氧化物的催化剂,用于餐饮废油与甲醇进行酯交换反应合成生物柴油.采用BET、SEM对Ce_xZr_1-xO₂进行表征分析.研究不同制备方法、CeO₂的负载量和煅烧温度对催化剂活性的影响,以及不同的酯交换反应条件对生物柴油产率的影响.制备的Ce_xZr_1-xO₂具有松木的生物形态,并有助于催化剂形成多孔道结构.以Ce_xZr_1-xO₂为催化剂,考察甲醇和餐饮废油的酯交换反应.结果表明：当x=0.5,煅烧温度为600℃时,甲醇与餐饮废油物质的量比为60：1,催化剂用量（基于餐饮废油的质量）的质量分数为5%,反应温度为190℃,反应时间为6 h的反应条件下,酯交换反应的甲酯收率达到91.1%.     

模板法制备La2O3-CexZr1-xO2催化酯交换反应的研究

以松木屑为模版,制备了La₂O₃-Ce_xZr_1-xO₂复合氧化物,用于催化餐饮废弃油合成生物柴油的酯交换反应。采用BET比表面积分析仪、扫描电子显微镜（SEM）对La₂O₃-Ce_xZr_1-xO₂进行表征。研究不同制备方法对催化剂活性的影响,分析不同的反应条件对酯交换反应产率的影响。结果表明：当反应条件为x=0.5,催化剂量为餐饮废油质量的5%,甲醇与餐饮废油物质的量的比为54：1时,在165℃下反应4.5 h左右,酯交换反应获得生物柴油的产率为91.1%。     

二维材料MXene的制备及其在光催化产氢领域的研究进展

MXene是一种类石墨烯结构的新型二维材料,由MAX材料刻蚀掉A层后得到手风琴状MXene,然后经过插层步骤可以得到少层或单层的MXene薄片.MXene具有良好的物理化学性质,如高导电性、高比表面积、活性位点多和独特的形貌及结构,使其在储能、电池、超级电容器和光催化方面具有良好的发展前景.本文中列举新型二维材料MXene的几种主要制备方法,阐述MXene在光催化产氢领域展现出来的优异性能,并对其发展前景做出一定的展望.     

Ti3SiC2代替石墨金属基自润滑材料研究进展

Ti₃SiC₂是一种新型的金属陶瓷材料,该材料兼具金属与陶瓷材料的双重性能,具有良好的导电性、导热性、加工性、耐腐蚀性与高温抗氧化性,同时该材料还具有超低的摩擦因数.基于其独特性能,大量科研工作开始投入到使用Ti₃SiC₂代替石墨制备金属基自润滑复合材料中.介绍了近年来石墨及以Ti₃SiC₂作为固体润滑颗粒制备的金属基自润滑复合材料的研究现状及进展.探讨了石墨和Ti₃SiC₂与金属界面结合问题,并对比两种复合材料的力学性能和摩擦学性能.最后指出以Ti₃SiC₂代替石墨制备金属基自润滑材料的可行性以及未来的发展方向.     

二维NiFe-LDH/Mo(OS)x纳米片协同促进电催化析氧反应

过渡族金属基二维纳米材料作为电催化析氧反应（oxygen evolution reaction, OER）催化剂具有巨大的潜力。通过原位电沉积法,在泡沫镍基底表面制备了二维层状镍铁双氢氧化物（NiFe-LDH）和氧硫化钼Mo(OS)_x纳米片异质结构。NiFe LDH/Mo(OS)_x电极在1 M KOH溶液中表现出优异的OER性能和长效稳定性,在10 mA/cm²电流密度下过电势仅为220 mV。在100、500 mA/cm²的高电流密度下,也能达到253、304 mV的低过电势。研究结果表明,NiFe-LDH/Mo(OS)_x电极优异的OER性能归因于Mo(OS)_x和NiFe LDH的协同作用,极大地促进了Fe²⁺向Fe³⁺活性物质的转化,并促进了氧空位的形成。这种协同制备方法为合理构建和设计异质结构电催化剂,实现高效的水分解提供了帮助。     

GH105合金元素含量对析出相的影响

采用Thermo-Calc及JMatPro软件,对GH105合金在600～1 600℃的相图进行计算,并对C,Cr,Co,Mo,Zr,Ti,Al以及微量B对GH105合金主要析出相MC,M₂₃C₆,M₃B₂,μ,σ和γ''的影响进行探究。结果表明：C的增加提高了M₂₃C₆和MC相的析出量和M₂₃C₆相的析出温度,降低了σ相的析出量和析出温度,同时μ相的析出温度明显下降;Cr的增加显著提高了σ相的析出量和析出温度;Co的增加提高了μ相和σ相的析出量和析出温度,降低了M₂₃C₆相的析出量和析出温度;Mo的增加显著提高了μ相和σ相的析出量和析出温度;Zr的增加提高了σ相的析出量和析出温度,提高了MC相的析出量,降低了M₂₃C₆相的析出量和析出温度;B的增加显著提高了M₃B₂相的析出量;Al,Ti和m（Al）：m（Ti）的增加,提高了γ''相的析出量,其中Al和m（Al）：m（Ti）相的增加还提高了γ''相的析出温度。     

Magnetoelectric and converse magnetoelectric res ponses in TbxDy1-xFe2-y alloy ＆ Pb（Mg1/3Nb2/3）（1-x）TixO3 crystal laminated composites

Measured results of magnetoelectric （ME） and converse magnetoelectric （CME） effects of TbxDy1-xFe2-y/ Pb（Mg1/3Nb2/3）（1-x）TixO3/TbxDy1-xFe2-y （TD/PMNT/TD） and PMNT/TD/PMNT laminated composites are presented. ME effect was determined by measuring laminate voltage output under a Helmholtz-generated AC field biased by a DC field （0-1 kOe） （1Oe = 79.58 A/m）. The CME effect was measured by recording the voltage induced in a solenoid encompassing the ME sample while exposed to a DC bias field and PMNT layer driven by a 10 V AC source. The ME and CME responses in the two laminated structure are linear. The highest values of ME coefficients in TD/PMNT/TD and PMNT/TD/PMNT composites are 384 mV/Oe and 158 mV/Oe, respectively, while the highest values of CME coefficients in the two composites are 118 mG/V and 162 mG/V （1 G=10^-4 T）, respectively.     

(Nd1-xErx)3Fe27.31Ti1.69化合物的磁晶各向异性

用振动样品磁强计并结合X射线衍射准确判定了Nd_2.4Er_0.6Fe_27.31Ti_1.69化合物的磁晶各向异性方式, 研究结果发现, Nd_2.4Er_0.6Fe_27.31Ti_1.69化合物的磁晶各向异性从室温时的易面转变到低温时的易锥.     

尖晶石型Li4Ti5O12的合成及其性能

采用高温固相法、溶胶-凝胶法和热聚合法制备锂离子电池负极材料Li₄Ti₅O_12.通过X-射线衍射、扫描电镜显微镜、电化学阻抗和恒流充放电表征产物的结构、形貌及电化学性能.3种方法制备的Li₄Ti₅O₁₂均为尖晶石结构,用高温固相法所得的粉体颗粒较大,而用溶胶-凝胶法所得粉体颗粒最小,其平均粒度在200~350 nm范围内,表现出较好的电化学性能;溶胶-凝胶法制备的样品粉末在0.2 C倍率下首次放电容量为174.5 mAh/g,经过25次循环后容量衰减仅5.7%.     

Improvement in hydrogen storage performance of Mg by mechanical grinding with molten salt etching Ti3C2Clx

Mg-based materials are currently a hot research topic as hydrogen storage materials due to their considerable theoretical hydrogen storage capacity. However, the kinetic performance of hydrogen absorption and desorption of Mg is too slow and requires high temperature, which seriously hinders the application of this material. MXene is a new type of two-dimensional material with significant role in improving thermodynamics and kinetics. In this experiment, a two-dimensional layered MXene containing Cl functional group was prepared by molten salt etching using the Ti-containing MAX phase as the raw material. Then different ratios of Ti₃C₂Cl_x were uniformly dispersed onto the surface of Mg by high energy ball milling. The samples were characterized by hydrogen absorption and desorption kinetics, SEM, XRD, XPS, and DSC to investigate the effect of Ti₃C₂Cl_x on the hydrogen absorption and desorption performance of Mg. The onset hydrogen absorption temperature can be reduced to room temperature and the hydrogen release temperature is reduced by 200 ​°C by doping Ti₃C₂Cl_x. And there is also 5.4 ​wt% hydrogen storage in the isothermal hydrogen absorption test at 400 ​°C. The results of DSC demonstrate that the E_a of Mg+15 ​wt% Ti₃C₂Cl_x was reduced by 12.6% compared to pristine Mg. The ΔH is almost invariable. The results of XPS show that the presence of multivalent Ti promotes electron transfer and thus improves the conversion between Mg²⁺/Mg and H⁻/H. This study provides a guideline for further improving the hydrogen absorption and desorption performance of Mg-based hydrogen storage materials.     

氧化吸收法同步脱除燃烧烟气中SO2，NOx和CO2的化学热力学及其评价

湿化学法同步脱除烟气中气态污染物是燃烧源大气污染控制的重要方法之一,为探究采用不同氧化吸收策略同时脱除燃烧烟气中SO_2,NO_x和CO_2的可行性,基于化学热力学原理,分析了9种联合氧化吸收策略的性能,具体的氧化吸收策略包括:H_2O_2-NH_3·H_2O,H_2O_2-MDEA,H_2O_2-NaOH,O3-NH_3·H_2O,O3-MDEA,O3-NaOH,NaClO_2-NH_3·H_2O,NaClO_2-MDEA和NaClO_2-NaOH,并提出新的动态加权法对其性能进行综合评价。结果表明:上述所有策略均具有SO_2,NO_x和CO_2捕获的可行性。O3-NaOH,NaClO_2-MDEA和NaOH做吸收剂的氧化吸收溶液分别对单一脱硫、脱硝和脱碳效果最好。当综合考虑同步脱除SO_2,NO_x和CO_2时,NaClO_2-MDEA优于其他策略,其结果可为燃烧烟气中的气体污染物的联合脱除提供参考。     

Preparation of Fe3O4@Au nano-composites by self-assembly technique for immobilization of glucose oxidase

Superparamagnetism amination nanocrystals Fe₃O₄ with 3-aminopropyltriethyloxy silane (APTES) were prepared by modified co-precipitation method. Next, 4-5 nm gold nanoparticles, prepared by classical Frens procedure, were coated on the surface of the amination Fe₃O₄ by self-assembly technology. The prepared Fe₃O₄@Au nanocomposite particles were investigated by transmission electron microscopy (TEM), UV-vis, infrared spectrum (FT-IR), and vibrating sample magnetometer (VSM) in order to elucidate the morphology, optics and magnetic properties of the nanocomposites. Their uniform distribution of particle size, which is about 15 nm, and good magnetic responsiveness were observed. In view of the fact that Fe₃O₄ owns superparamagnetism and that nano-gold can readily combine with biological molecules, glucose oxidase (GO _x ) was chosen as a model to penetrate the condition of immobilizing enzyme, and enzymatic properties of resultant immobilized enzyme were studied as well. By systematic optimization, we established that at 28°C, and pH (5.5) and when mole ratio of Fe₃O₄:HAuCl₄ was 0.5:1, the immobilization provided the best results. Finally, we are glad to find that the immobilized enzyme exhibits excellent thermostability in addition to its better stability than free enzyme. Thus, herein described immobilized enzyme could be used repeatedly with the assistance of an external magnetic field. Supported by the Science Foundation of Sichuan Province, China (Grant No. 2005A033) and Science Foundation of Sichuan Agricultural University for Distinguished Young Teachers (Grant No. 007202)     

Chemical states of the atoms in magnetic multilayers Ta/NiO x /Ni81Fe19/Ta and Co/AlO x /Co

Ta/NiO _x /Ni₈₁Fe₁₉/Ta and Co/AlO _x /Co multilayers were prepared by rf reactive and dc magnetron sputtering. The exchange coupling field (H _ex) and the coercivity (H _c) of NiO _x /Ni₈₁Fe₁₉ as a function of the ratio of Ar to O₂ during the deposition process were studied. The composition and chemical states at the interface region of NiO _x /NiFe were also investigated using the X-ray photoelectron spectroscopy (XPS) and peak decomposition technique. The results show that when the ratio of Ar to O₂ is equal to 7 and the argon sputtering pressure is 0.57 Pa, the x value is approximately 1 and the valence of nickel is +2. At this point, NiO _x is antiferromagnetic NiO and the corresponding H_ex is the largest. As the ratio of Ar/O₂ deviates from 7, the H _ex will decrease due to the presence of magnetic impurities such as Ni⁺³ or metallic Ni at the interface region of NiO _x /NiFe, while the H _c will increase due to the metallic Ni. Al layers in Co/AlO _x /Co multilayers were also studied by angle-resolved XPS. Our finding is that the bottom Co could be completely covered by depositing an Al layer about 1.8 nm. The thickness of AlO _x was 1.2 nm.     

多主元FeNiMnCr0.75Alx高熵合金微观结构和力学性能的研究

研究了合金中Al含量的增加对铸态FeNiMnCr_0.75Al_x（x=0.25,0.5,0.75,原子分数）高熵合金晶体结构及力学性能的影响。采用X射线衍射仪（XRD）和透射电子显微镜（TEM）对合金的微观结构及形貌进行分析,采用维氏硬度计和MTS万能试验机测试合金的硬度和室温压缩性能。试验结果表明,铸态下,FeNiMnCr_0.75Al_x高熵合金均由bcc和fcc两种晶体结构的相构成。随着Al含量的增加,合金中bcc结构的相的相对含量逐渐增加,导致硬度和压缩屈服强度也随之升高,应变量降低;且Al含量的增加最终也促使合金中无序bcc结构的相逐渐转变为Ni：（Mn+Al）=1：1（原子分数比）型有序bcc结构的相。     

水热体系下二氧化钛与氧化石墨烯复合纳米晶的合成

 200 ℃下四方结构的二氧化钛(TiO2)与氧化石墨烯(GO)复合纳米晶在一个装有适量钛酸四丁酯、无水乙醇、氧化石墨烯和蒸馏水的密闭的水热釜中加热12 h后被制备。X射线粉末衍射仪（XRD)、扫描电子显微镜（SEM）、透射电子显微镜（TEM）等一系列分析仪器被运用来揭示二氧化钛与氧化石墨烯复合纳米晶是由粒径大约160 nm的四方结构的二氧化钛纳米晶与氧化石墨烯复合而成,通过紫外吸收对其光学性能进行了必要的测试。
     

TiO_2-SnO_2异质结纳米棒催化剂高效光降解甲基橙

采用水热法合成SnO_2-TiO_2异质结纳米棒光催化剂,该材料具有独特的纳米棒和异质结结构,可有效阻止光生电子和空穴的复合,通过光电流、X射线光电子能谱(XPS)、X射线衍射(XRD)、透射电子显微镜(TEM)等表征手段证明其异质结功效.该材料作为光催化剂,使用时能大幅提升紫外光降解甲基橙(MO)的效率.