具有良好可再生性的新型二氧化硅磁性氧化石墨烯纳米复合材料

Graphene oxide (GO) wrapped Fe₃O₄ nanoparticles (NPs) were prepared by coating the Fe₃O₄ NPs with a SiO₂ layer, and then modifying by amino groups, which interact with the GO nanosheets to form covalent bonding. The SiO₂ coating layer plays a key role in integrating the magnetic nanoparticles with the GO nanosheets. The effect of the amount of SiO₂ on the morphology, structure, adsorption, and regenerability of the composites was studied in detail. An appropriate SiO₂ layer can effectively induce the GO nanosheets to completely wrap the Fe₃O₄ NPs, forming a core-shell Fe₃O₄@SiO₂@GO composite where Fe₃O₄@SiO₂ NPs are firmly encapsulated by GO nanosheets. The optimized Fe₃O₄@SiO₂@GO sample exhibits a high saturated adsorption capacity of 253 mg·g?1 Pb(II) cations from wastewater, and the adsorption process is well fitted by Langmuir adsorption model. Notably, the composite displays excellent regeneration, maintaining a ~90% adsorption capacity for five cycles, while other samples decrease their adsorption capacity rapidly. This work provides a theoretical guidance to improve the regeneration of the GO-based adsorbents.     

微波预处理对复杂铜矿磨矿及浮选动力学的影响

The effect of CaCO₃, Na₂CO₃, and CaF₂ on the reduction roasting and magnetic separation of high-phosphorus iron ore containing phosphorus in the form of Fe₃PO₇ and apatite was investigated. The results revealed that Na₂CO₃ had the most significant effect on iron recovery and dephosphorization, followed by CaCO₃, the effect of CaF₂ was negligible. The mechanisms of CaCO₃, Na₂CO₃, and CaF₂ were investigated using X-ray diffraction (XRD), scanning electron microscopy and energy dispersive spectrometry (SEM–EDS). Without additives, Fe₃PO₇ was reduced to elemental phosphorus and formed an iron–phosphorus alloy with metallic iron. The addition of CaCO₃ reacted with Fe₃PO₇ to generate an enormous amount of Ca₃(PO₄)₂ and promoted the reduction of iron oxides. However, the growth of iron particles was inhibited. With the addition of Na₂CO₃, the phosphorus in Fe₃PO₇ migrated to nepheline and Na₂CO₃ improved the reduction of iron oxides and growth of iron particles. Therefore, the recovery of iron and the separation of iron and phosphorus were the best. In contrast, CaF₂ reacted with Fe₃PO₇ to form fine Ca₃(PO₄)₂ particles scattered around the iron particles, making the separation of iron and phosphorus difficult.     

不同硅饱和系数水榴石的碳酸化分解动力学

Carbonated decomposition of hydrogarnet is one of the vital reactions of the calcification–carbonation method, which is designed to dispose of low-grade bauxite and Bayer red mud and is a novel eco-friendly method. In this study, the effect of the silica saturation coefficient (x) on the carbonation of hydrogarnet was investigated from the kinetic perspective. The results indicated that the carbonation of hydrogarnets with different x values (x = 0.27, 0.36, 0.70, and 0.73) underwent two stages with significantly different rates, and the kinetic mechanisms of the two stages can be described by the kinetic functions R3 and D3. The apparent activation energies at Stages 1 and 2 were 41.96–81.64 and 14.80–34.84 kJ/mol, respectively. Moreover, the corresponding limiting steps of the two stages were interfacial chemical reaction and diffusion.     

一种超重力燃烧合成制备高性能高熵合金的新方法

A new method of high-gravity combustion synthesis (HGCS) followed by post-treatment (PT) is reported for preparing high-performance high-entropy alloys (HEAs), Cr_0.9FeNi_2.5V_0.2Al_0.5 alloy, whereby cheap thermite powder is used as the raw material. In this process, the HEA melt and the ceramic melt are rapidly formed by a strong exothermic combustion synthesis reaction and completely separated under a high-gravity field. Then, the master alloy is obtained after cooling. Subsequently, the master alloy is sequentially subjected to conventional vacuum arc melting (VAM), homogenization treatment, cold rolling, and annealing treatment to realize a tensile strength, yield strength, and elongation of 1250 MPa, 1075 MPa, and 2.9%, respectively. The present method is increasingly attractive due to its low cost of raw materials and the intermediate product obtained without high-temperature heating. Based on the calculation of phase separation kinetics in the high-temperature melt, it is expected that the final alloys with high performance can be prepared directly across master alloys with higher high-gravity coefficients.     

窄板坯结晶器内连铸工艺参数对钢液流场的影响

Computational simulations and high-temperature measurements of velocities near the surface of a mold were carried out by using the rod deflection method to study the effects of various operating parameters on the flow field in slab continuous casting (CC) molds with narrow widths for the production of automobile exposed panels. Reasonable agreement between the calculated results and measured subsurface velocities of liquid steel was obtained under different operating parameters of the CC process. The simulation results reveal that the flow field in the horizontal plane located 50 mm from the meniscus can be used as the characteristic flow field to optimize the flow field of molten steel in the mold. Increases in casting speed can increase the subsurface velocity of molten steel and shift the position of the vortex core downward in the downward circulation zone. The flow field of liquid steel in a 1040 mm-wide slab CC mold can be improved by an Ar gas flow rate of 7 L·min?1 and casting speed of 1.7 m·min?1. Under the present experimental conditions, the double-roll flow pattern is generally stable at a submerged entry nozzle immersion depth of 170 mm.     

电渣重熔脱硫技术研究进展

Electroslag remelting (ESR) gives a combination of liquid metal refining and solidification structure control. One of the typical aspects of liquid metal refining during ESR for the advanced steel and alloy production is desulfurization. It involves two patterns, i.e., slag–metal reaction and gas–slag reaction (gasifying desulfurization). In this paper, the advances in desulfurization practices of ESR are reviewed. The effects of processing parameters, including the initial sulfur level of consumable electrode, remelting atmosphere, deoxidation schemes of ESR, slag composition, melting rate, and electrical parameters on the desulfurization in ESR are assessed. The interrelation between desulfurization and sulfide inclusion evolution during ESR is discussed, and advancements in the production of sulfur-bearing steel at a high-sulfur level during ESR are described. The remaining challenges for future work are also proposed.     

利用皮秒激光烧蚀制备非球形铝纳米颗粒

We report the picosecond laser ablation of aluminum targets immersed in a polar organic liquid (chloroform, CHCl₃) with ~2 ps laser pulses at an input energy of ~350 μJ. The synthesized aluminum nanoparticles exhibited a surface plasmon resonance peak at ~340 nm. Scanning electron microscopy images of Al nanoparticles demonstrated the spherical morphology with an average size of (27 ± 3.6) nm. The formation of smaller spherical Al nanoparticles and the diminished growth could be from the formation of electric double layers on the Al nanoparticles. In addition to spherical aluminum nanoparticles, triangular/pentagonal/hexagonal nanoparticles were also observed in the colloidal solution. Field emission scanning electron microscopy images of ablated Al targets demonstrated laser induced periodic surface structures (LIPSSs), which were the high spatial frequency LIPSSs (HSF-LIPSSs) since their grating period was ~280 nm. Additionally, coarse structures with a period of ~700 nm were observed.     

Mineral transition and formation mechanism of calcium aluminate compounds in CaO?Al2O3?Na2O system during high-temperature sintering

The mineral transition and formation mechanism of calcium aluminate compounds in CaO?Al₂O₃?Na₂O system during the high-temperature sintering process were systematically investigated using DSC?TG, XRD, SEM?EDS, FTIR, and Raman spectra, and the crystal structure of Na₄Ca₃(AlO₂)₁₀ was also simulated by Material Studio software. The results indicated that the minerals formed during the sintering process included Na₄Ca₃(AlO₂)₁₀, CaO·Al₂O₃, and 12CaO·7Al₂O₃, and the content of Na₄Ca₃(AlO₂)₁₀ could reach 92wt% when sintered at 1200°C for 30 min. The main formation stage of Na₄Ca₃(AlO₂)₁₀ occurred at temperatures from 970 to 1100°C, and the content could reach 82wt% when the reaction temperature increased to 1100°C. The crystal system of Na₄Ca₃(AlO₂)₁₀ was tetragonal, and the cells preferred to grow along crystal planes (110) and (210). The formation of Na₄Ca₃(AlO₂)₁₀ was an exothermic reaction that followed a secondary reaction model, and its activation energy was 223.97 kJ/mol.     

含细夹层的分矿充填层中流动特性的可视化

Ore particles, especially fine interlayers, commonly segregate in heap stacking, leading to undesirable flow paths and changeable flow velocity fields of packed beds. Computed tomography (CT), COMSOL Multiphysics, and MATLAB were utilized to quantify pore structures and visualize flow behavior inside packed beds with segregated fine interlayers. The formation of fine interlayers was accompanied with the segregation of particles in packed beds. Fine particles reached the upper position of the packed beds during stacking. CT revealed that the average porosity of fine interlayers (24.21%) was significantly lower than that of the heap packed by coarse ores (37.42%), which directly affected the formation of flow paths. Specifically, the potential flow paths in the internal regions of fine interlayers were undeveloped. Fluid flowed and bypassed the fine interlayers and along the sides of the packed beds. Flow velocity also indicated that the flow paths easily gathered in the pore throat where flow velocity (1.8 × 10?5 m/s) suddenly increased. Fluid stagnant regions with a flow velocity lower than 0.2 × 10?5 m/s appeared in flow paths with a large diameter.     

Parallel adaptive radiations in two major clades of placental mammals

Higher level relationships among placental mammals, as well as the historical biogeography and morphological diversification of this group, remain unclear. Here we analyse independent molecular data sets, having aligned lengths of DNA of 5,708 and 2,947 base pairs, respectively, for all orders of placental mammals. Phylogenetic analyses resolve placental orders into four groups: Xenarthra, Afrotheria, Laurasiatheria, and Euarchonta plus Glires. The first three groups are consistently monophyletic with different methods of analysis. Euarchonta plus Glires is monophyletic or paraphyletic depending on the phylogenetic method. A unique nine-base-pair deletion in exon 11 of the BRCA1 gene provides additional support for the monophyly of Afrotheria, which includes proboscideans, sirenians, hyracoids, tubulidentates, macroscelideans, chrysochlorids and tenrecids. Laurasiatheria contains cetartiodactyls, perissodactyls, carnivores, pangolins, bats and eulipotyphlan insectivores. Parallel adaptive radiations have occurred within Laurasiatheria and Afrotheria. In each group, there are aquatic, ungulate and insectivore-like forms.     

壳菜果亚科(金缕梅科)与相关亚科的核糖体DNAITS区序列分析及系统发育关系(英文)

测定和分析了金缕梅科（Ｈａｍａｍｅｌｉｄａｃｅａｅ）壳菜果亚科等各亚科代表属的核糖体ＤＮＡＩＴＳ区和５８Ｓ编码区序列．应用最大简约法构建的分子系统树表明：壳菜果亚科（Ｍｙｔｉｌａｒｉｏｉｄｅａｅ）植物形成１个单系类群［含壳菜果属（Ｍｙｔｉｌａｒｉａ）和山桐材属（Ｃｈｕｎｉａ）］,支持壳菜果亚科作为１个独立的亚科．本研究所得到的ＩＴＳ数据表明马蹄荷亚科（Ｅｘｂｕｃｋｌａｎｄｉｏｉｄｅａｅ）与红花荷亚科（Ｒｈｏｄｏｌｅｉｏｉｄｅａｅ）,金缕梅亚科（Ｈａｍａｍｅｌｉｄｉｏｉｄｅａｅ）与双花木亚科（Ｄｉｓａｎｔｈｏｉｄｅａｅ）分别为姐妹群关系（其自展数据支持率各为９５％和５８％）．分子系统树还表明,测得的所有金缕梅科植物形成一单系类群（其自展数据支持率为９９％）,枫香亚科（Ｌｉｑｕｉｄａｍｂａｒｏｉｄｅａｅ）为该科最基础的１个分支．这结果与１９９７年所得到的结论相一致．     

五倍子蚜与寄主植物DNA序列系统发育关系及其协同进化

五倍子蚜特指寄生在漆树科盐肤木属几种植物上形成五倍子虫瘿的一类蚜虫.本研究采用PCR直接测序方法测定了五倍子蚜10个种共19个样本的mtDNA COI基因部分DNA序列(660 bp),从GenBank下载瘿绵蚜科Pemphigidae瘿绵蚜属Pemphigus、卷叶绵蚜属Prociphilus和棉蚜属Eriosoma及纩蚜科Mindaridae纩蚜属Min-darus种相应基因序列为外类群,构建五倍子蚜种之间的MP和ML分子系统发育关系,两种方法得到一致的结果.五倍子蚜10个种共形成3个大的聚类簇,圆角倍蚜属的红倍花蚜和倍花蚜、铁倍蚜属的4个种(亚种)分别以很高的置信度聚为一支,铁倍花蚜属的铁倍花蚜、小铁枣蚜属的红小铁枣蚜与倍蚜属的角倍蚜和倍蛋蚜聚为一支,但是其置信度较低.同时,采用生物信息学方法从GenBank下载五倍子蚜第一寄主盐肤木属Rhus植物cpDNATrnL-F区序列(980 bp),建立寄主植物种之间的MP和ML系统发育关系,与角倍蚜系统发育关系进行比较分析,结果显示二者之间明显的协同进化关系,但是五倍子蚜的聚类并没有完全和寄主植物之间形成一对一的平行对应关系.     

Phylogeny of fireflies (Coleoptera: Lampyridae) inferred from mitochondrial 16S ribosomal DNA，with references to morphological and ethological traits

We sequenced partial mitochondrial 16S ribosomal DNA (16S rDNA) of 18 firefly species from Southwest of China. Combined with homologous sequences previously reported, phylogenetic trees including Japanese, Korean and Chinese species were reconstructed by neighbor-joining, maximum parsimony and Bayesian methods. All reconstructions agree on most nodes of the trees. Monophyly of Lampyridae is not supported because Rhagophthalmus ohbai in Rhagophthalmidae is included within it. Lamprigera, a genus placed unreliably in Lampyrinae, shows a close relationship to Amydetinae. Monophyly of Luciolinae is not supported because Pristolycus sagulatus (Lampyrinae) is included within it. In the Luciolinae, monophyly of Curtos and Hotaria is well established, respectively, but both morphological and molecular data continue to indicate that Luciola is not monophyletic and its subdivision is indeed necessary. Within the Lampyrinae, both Pyrocoelia and Diaphanes are not monophyletic, but monophyly of Pyrocoelia+Diaphanes is well supported. Phylogeny of Diaphanes is discussed for the first time. Generic placement of a newly discovered species (Diaphanes pectinealis Li et Liang) sharing some characters of Pyrocoelia and Diaphanes challenges the delimitation of these two similar genera. With references to the firefly mating systems, we suggest that more emphases should be placed on those sexually selected characters such as antennal structure in taxonomy of Lampyridae.     

基于16S rRNA和POMC基因序列的中国北方林蛙属动物系统发生关系

基于16S rRNA和POMC基因部分序列研究了中国北方林蛙属动物的系统发生关系.利用ClustalX软件对序列进行对位排列后,长度为1148bp,内群变异位点259,简约位点110.利用MP法、ML法和BI法构建系统进化树,结果显示林蛙属物种构成单系群,其中东北种群聚为一支,中国林蛙聚为一支,支持东北林蛙为有效物种.桓仁林蛙和核型为2n=26的林蛙属物种聚为一支,因此不支持核型为2n=24的林蛙形成单系群.桓仁林蛙、昆嵛林蛙、黑龙江林蛙单独聚为一支,表明三者之间的亲缘关系较近.     

Phylogeny of higher taxa of hexapoda according to 12sRNA sequences

The phylogenetic relationship of Hexapoda has been debated for a long time, which will be resolved mainly depending on the settlement of monophyly, affinities and interrelationships among Protura, Collembola and Diplura. Mitochondrial 12sRNA gene about 355 bp fragments from one proturan species, two collembolan species, two dipluran species and one oribatid species were sequenced. The Kimura 2-parameter distances were calculated and a series of molecular phylogenetic trees were reconstructed by using the N-J method, from which the following points were drawn: (ⅰ) Protura and Collembola compose a monophyletic group representing absent-cerci; (ⅱ) Diplura is not a monophyletic group, in which Campodeoid with filiform cerci belongs to a clade and Japygoid with pincer cerci and Ectognatha compose another clade, that is, Insecta s. str. stemmed from Japygoid. So it would be suggested that the phylogenetic relationship of Hexapoda is [Parainsecta (Collembola + Protura) +Campodeoid +Insecta (Japygoid + Ectognatha)].     

Phylogenetic position of Schnabelia, a genus endemic to China： Evidence from sequences of cpDNA matK gene and nrDNA ITS regions

The chloroplast gene matK and the internal transcribed spacers (ITS) of the nuclear ribosomal DNA from Schnabelia, a genus endemic to China, and 6 genera of Verbenaceae and 13 genera of Lamiaceae were sequenced. The phylogenetic signal and validity outgroups were measured and evaluated by means of the relatively apparent synapomorphy analysis (RASA). Independent and combined phylogenetic analyses for the matK and ITS sequences were performed using the maximum parsimony (MP), neighbor-joining (NJ) and maximum likelihood (ML) methods, indicating that Schnabelia oligophylla and Caryopteris terniflora form a sister-group relationship. The Caryopteris complex is not shown to be a monophyly because Trichostema, C. paniculata and C. forrestii are paraphyletic to the clade containing the remaining members of the complex. A monophyly of Ajugoideae proposed by Cantino et al., including 8 genera in this study, is strongly supported and the closest relatives of Schnabelia are in the Ajugoideae (Lamiaceae), especially near Caryopteris terniflora. The polygenetic analyses also showed that the genera of Lamiaceae and Verbenaceae sampled in this tudy are phylogenetically mixed and the genus Avicennia is distant to other genera of Verbenaceae. RASA and combined analysis can be used as effective approaches to determining the relationships among phylogenetically complex groups.     

Bayesian mixed models and divergence time estimation of Chinese cavefishes (Cyprinidae: Sinocyclocheilus)

The genus Sinocyclocheilus is distributed in Yun-Gui Plateau and its surrounding region only, within more than 10 cave species showing different degrees of degeneration of eyes and pigmentation with wonderful adaptations. To present, published morphological and molecular phylogenetic hypotheses of Sinocyclocheilus from prior works are very different and the relationships within the genus are still far from clear. We obtained the sequences of cytochrome b (cyt b) and NADH dehydrogenase subunit 4 (ND4) of 34 species within Sinocyclocheilus, which represent the most dense taxon sampling to date. We performed Bayesian mixed models analyses with this data set. Under this phylogenetic framework, we estimated the divergence times of recovered clades using different methods under relaxed mo-lecular clock. Our phyloegentic results supported the monophyly of Sinocyclocheilus and showed that this genus could be subdivided into 6 major clades. In addition, an earlier finding demonstrating the polyphyletic of cave species and the most basal position of S. jii was corroborated. Relaxed diver-gence-time estimation suggested that Sinocyclocheilus originated at the late Miocene, about 11 million years ago (Ma), which is older than what have been assumed.     

基于18S rDNA的全变态类昆虫系统发育分析

 为了揭示全变态类昆虫的系统发育关系,选择准新翅群3目3种昆虫作为外群,基于18S rDNA序列对全变态类11个目21科21种昆虫的系统发育关系进行研究。通过对18S rDNA序列进行多重序列比对,用似然比检验进行碱基替代模型的选择,分别利用ML法和贝叶斯法构建系统发育树。结果表明,全变态类昆虫聚为3个分支：双翅目+捻翅目、鞘翅目+(广翅目+(蛇蛉目+脉翅目))和膜翅目+(蚤目+长翅目)+(鳞翅目+毛翅目)。长翅类的单系性未得到支持。     

基于18S rDNA序列研究腺介虫亚目系统5发育关系

基于1720 bp 的18S rRNA 基因序列以 Darwinula sp．和 Cytherelloidea．munechikai 为外群,采用最大简约法(MP 法)和邻接法(NJ 法)对腺介虫亚目(Cypridocopina)3总科5科9种动物的系统发育关系进行了分析．结果表明：1)现生腺介虫亚目动物为单系群；2)两种营海水生活的介形类—海介虫总科(Pontocypridoidea)和大介虫总科(Macrocypridoidea)间的亲缘关系较近；3)现生腺介虫总科(Cypridoidea)也为单系群,但该总科内各科间关系较复杂,主要分为两支,其中腺介虫科的 Dolerocypris sp．与萤光介虫科的 Candona holzkanpfi 聚成一支；而萤光介虫科的 Cypria crenulata 和泥介虫科的 Ilyocypris．angulata 同时与腺介虫科其它动物聚为一支．