共查询到20条相似文献,搜索用时 35 毫秒
1.
《矿物冶金与材料学报》2021,28(12):2001-2007
Graphene oxide (GO) wrapped Fe3O4 nanoparticles (NPs) were prepared by coating the Fe3O4 NPs with a SiO2 layer, and then modifying by amino groups, which interact with the GO nanosheets to form covalent bonding. The SiO2 coating layer plays a key role in integrating the magnetic nanoparticles with the GO nanosheets. The effect of the amount of SiO2 on the morphology, structure, adsorption, and regenerability of the composites was studied in detail. An appropriate SiO2 layer can effectively induce the GO nanosheets to completely wrap the Fe3O4 NPs, forming a core-shell Fe3O4@SiO2@GO composite where Fe3O4@SiO2 NPs are firmly encapsulated by GO nanosheets. The optimized Fe3O4@SiO2@GO sample exhibits a high saturated adsorption capacity of 253 mg·g?1 Pb(II) cations from wastewater, and the adsorption process is well fitted by Langmuir adsorption model. Notably, the composite displays excellent regeneration, maintaining a ~90% adsorption capacity for five cycles, while other samples decrease their adsorption capacity rapidly. This work provides a theoretical guidance to improve the regeneration of the GO-based adsorbents. 相似文献
2.
《矿物冶金与材料学报》2021,28(12):1908-1916
The effect of CaCO3, Na2CO3, and CaF2 on the reduction roasting and magnetic separation of high-phosphorus iron ore containing phosphorus in the form of Fe3PO7 and apatite was investigated. The results revealed that Na2CO3 had the most significant effect on iron recovery and dephosphorization, followed by CaCO3, the effect of CaF2 was negligible. The mechanisms of CaCO3, Na2CO3, and CaF2 were investigated using X-ray diffraction (XRD), scanning electron microscopy and energy dispersive spectrometry (SEM–EDS). Without additives, Fe3PO7 was reduced to elemental phosphorus and formed an iron–phosphorus alloy with metallic iron. The addition of CaCO3 reacted with Fe3PO7 to generate an enormous amount of Ca3(PO4)2 and promoted the reduction of iron oxides. However, the growth of iron particles was inhibited. With the addition of Na2CO3, the phosphorus in Fe3PO7 migrated to nepheline and Na2CO3 improved the reduction of iron oxides and growth of iron particles. Therefore, the recovery of iron and the separation of iron and phosphorus were the best. In contrast, CaF2 reacted with Fe3PO7 to form fine Ca3(PO4)2 particles scattered around the iron particles, making the separation of iron and phosphorus difficult. 相似文献
3.
4.
《矿物冶金与材料学报》2020,27(4):472-482
Carbonated decomposition of hydrogarnet is one of the vital reactions of the calcification–carbonation method, which is designed to dispose of low-grade bauxite and Bayer red mud and is a novel eco-friendly method. In this study, the effect of the silica saturation coefficient (x) on the carbonation of hydrogarnet was investigated from the kinetic perspective. The results indicated that the carbonation of hydrogarnets with different x values (x = 0.27, 0.36, 0.70, and 0.73) underwent two stages with significantly different rates, and the kinetic mechanisms of the two stages can be described by the kinetic functions R3 and D3. The apparent activation energies at Stages 1 and 2 were 41.96–81.64 and 14.80–34.84 kJ/mol, respectively. Moreover, the corresponding limiting steps of the two stages were interfacial chemical reaction and diffusion. 相似文献
5.
《矿物冶金与材料学报》2020,27(10):1347-1352
A new method of high-gravity combustion synthesis (HGCS) followed by post-treatment (PT) is reported for preparing high-performance high-entropy alloys (HEAs), Cr0.9FeNi2.5V0.2Al0.5 alloy, whereby cheap thermite powder is used as the raw material. In this process, the HEA melt and the ceramic melt are rapidly formed by a strong exothermic combustion synthesis reaction and completely separated under a high-gravity field. Then, the master alloy is obtained after cooling. Subsequently, the master alloy is sequentially subjected to conventional vacuum arc melting (VAM), homogenization treatment, cold rolling, and annealing treatment to realize a tensile strength, yield strength, and elongation of 1250 MPa, 1075 MPa, and 2.9%, respectively. The present method is increasingly attractive due to its low cost of raw materials and the intermediate product obtained without high-temperature heating. Based on the calculation of phase separation kinetics in the high-temperature melt, it is expected that the final alloys with high performance can be prepared directly across master alloys with higher high-gravity coefficients. 相似文献
6.
《矿物冶金与材料学报》2020,27(7):980-986
We report the picosecond laser ablation of aluminum targets immersed in a polar organic liquid (chloroform, CHCl3) with ~2 ps laser pulses at an input energy of ~350 μJ. The synthesized aluminum nanoparticles exhibited a surface plasmon resonance peak at ~340 nm. Scanning electron microscopy images of Al nanoparticles demonstrated the spherical morphology with an average size of (27 ± 3.6) nm. The formation of smaller spherical Al nanoparticles and the diminished growth could be from the formation of electric double layers on the Al nanoparticles. In addition to spherical aluminum nanoparticles, triangular/pentagonal/hexagonal nanoparticles were also observed in the colloidal solution. Field emission scanning electron microscopy images of ablated Al targets demonstrated laser induced periodic surface structures (LIPSSs), which were the high spatial frequency LIPSSs (HSF-LIPSSs) since their grating period was ~280 nm. Additionally, coarse structures with a period of ~700 nm were observed. 相似文献
7.
Computational simulations and high-temperature measurements of velocities near the surface of a mold were carried out by using the rod deflection method to study the effects of various operating parameters on the flow field in slab continuous casting (CC) molds with narrow widths for the production of automobile exposed panels. Reasonable agreement between the calculated results and measured subsurface velocities of liquid steel was obtained under different operating parameters of the CC process. The simulation results reveal that the flow field in the horizontal plane located 50 mm from the meniscus can be used as the characteristic flow field to optimize the flow field of molten steel in the mold. Increases in casting speed can increase the subsurface velocity of molten steel and shift the position of the vortex core downward in the downward circulation zone. The flow field of liquid steel in a 1040 mm-wide slab CC mold can be improved by an Ar gas flow rate of 7 L·min?1 and casting speed of 1.7 m·min?1. Under the present experimental conditions, the double-roll flow pattern is generally stable at a submerged entry nozzle immersion depth of 170 mm. 相似文献
8.
Electroslag remelting (ESR) gives a combination of liquid metal refining and solidification structure control. One of the typical aspects of liquid metal refining during ESR for the advanced steel and alloy production is desulfurization. It involves two patterns, i.e., slag–metal reaction and gas–slag reaction (gasifying desulfurization). In this paper, the advances in desulfurization practices of ESR are reviewed. The effects of processing parameters, including the initial sulfur level of consumable electrode, remelting atmosphere, deoxidation schemes of ESR, slag composition, melting rate, and electrical parameters on the desulfurization in ESR are assessed. The interrelation between desulfurization and sulfide inclusion evolution during ESR is discussed, and advancements in the production of sulfur-bearing steel at a high-sulfur level during ESR are described. The remaining challenges for future work are also proposed. 相似文献
9.
Mineral transition and formation mechanism of calcium aluminate compounds in CaO?Al2O3?Na2O system during high-temperature sintering
下载免费PDF全文
![点击此处可从《矿物冶金与材料学报》网站下载免费的PDF全文](/ch/ext_images/free.gif)
《矿物冶金与材料学报》2020,27(7):924-932
The mineral transition and formation mechanism of calcium aluminate compounds in CaO?Al2O3?Na2O system during the high-temperature sintering process were systematically investigated using DSC?TG, XRD, SEM?EDS, FTIR, and Raman spectra, and the crystal structure of Na4Ca3(AlO2)10 was also simulated by Material Studio software. The results indicated that the minerals formed during the sintering process included Na4Ca3(AlO2)10, CaO·Al2O3, and 12CaO·7Al2O3, and the content of Na4Ca3(AlO2)10 could reach 92wt% when sintered at 1200°C for 30 min. The main formation stage of Na4Ca3(AlO2)10 occurred at temperatures from 970 to 1100°C, and the content could reach 82wt% when the reaction temperature increased to 1100°C. The crystal system of Na4Ca3(AlO2)10 was tetragonal, and the cells preferred to grow along crystal planes (110) and (210). The formation of Na4Ca3(AlO2)10 was an exothermic reaction that followed a secondary reaction model, and its activation energy was 223.97 kJ/mol. 相似文献
10.
《矿物冶金与材料学报》2020,27(7):900-909
Ore particles, especially fine interlayers, commonly segregate in heap stacking, leading to undesirable flow paths and changeable flow velocity fields of packed beds. Computed tomography (CT), COMSOL Multiphysics, and MATLAB were utilized to quantify pore structures and visualize flow behavior inside packed beds with segregated fine interlayers. The formation of fine interlayers was accompanied with the segregation of particles in packed beds. Fine particles reached the upper position of the packed beds during stacking. CT revealed that the average porosity of fine interlayers (24.21%) was significantly lower than that of the heap packed by coarse ores (37.42%), which directly affected the formation of flow paths. Specifically, the potential flow paths in the internal regions of fine interlayers were undeveloped. Fluid flowed and bypassed the fine interlayers and along the sides of the packed beds. Flow velocity also indicated that the flow paths easily gathered in the pore throat where flow velocity (1.8 × 10?5 m/s) suddenly increased. Fluid stagnant regions with a flow velocity lower than 0.2 × 10?5 m/s appeared in flow paths with a large diameter. 相似文献
11.
We report the electrochemical performance of Ni(OH)2 on a gas diffusion layer (GDL). The Ni(OH)2 working electrode was successfully prepared via a simple method, and its electrochemical performance in 1 M NaOH electrolyte was investigated. The electrochemical results showed that the Ni(OH)2/GDL provided the maximum specific capacitance value (418.11 F·g?1) at 1 A·g?1. Furthermore, the Ni(OH)2 electrode delivered a high specific energy of 17.25 Wh·kg?1 at a specific power of 272.5 W·kg?1 and retained about 81% of the capacitance after 1000 cycles of galvanostatic charge–discharge (GCD) measurements. The results of scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS) revealed the occurrence of sodium deposition after long-time cycling, which caused the reduction in the specific capacitance. This study results suggest that the light-weight GDL, which can help overcome the problem of the oxide layer on metal–foam substrates, is a promising current collector to be used with Ni-based electroactive materials for energy storage applications. 相似文献
12.
《矿物冶金与材料学报》2020,27(9):1191-1202
High-density tailings, small cementitious materials, and additives are used for backfill materials with poor early compressive strength (ECS), which may greatly affect the mining and backfill cycle, to prepare paste backfill materials (PBMs) with a high ECS. The effects and mechanisms of different early strength agents on the property of PBM are investigated. The action mechanism of additives on the properties of PBM is also analyzed through X-ray diffraction, scanning electron microscope, and energy dispersive spectrometry. Results show that the effects of single-component additives 1, 3, and 6 are better than those of the other additives, and their optimal dosages are 3wt%, 1wt%, and 3wt%, respectively. The optimum multicomponent combinations are 1wt% of additive 1 and 1.5wt% of additive 6. The ECS of the paste with additive 10 increases to a greater extent than that of the other pastes because of the synergistic action of additive 1 with additive 6. The hydration product of Ca(OH)2 is consumed, and more C–S–H gels are generated with the addition of additives to paste. Tailings particles, ettringite crystals, and gels intertwined with one another form a dense net-like structure that fills the pores. This structure can significantly improve the ECS of PBM. 相似文献
13.
Ni–48.5at%Ti thin films were irradiated in the austenite phase by different energy-level protons at a dose rate of 1.85 × 1012 p/(cm2·s), and the total dose was 2.0 × 1016 p/cm2. The microstructures of the thin films before and after irradiation were evaluated by transmission electron microscopy (TEM) and grazing-incidence X-ray diffraction (GIXRD), which showed that the volume fraction of Ti3Ni4 phase elevated with proton energy level. The influence of proton irradiation on the transformation behavior of the TiNi thin films was investigated by differential scanning calorimetry (DSC). Compared with the unirradiation film, the reverse transformation start temperatures (As) decreased by about 3°C after 120 keV proton-irradiation. The proton irradiation also had a significant effect on the mechanical properties of the TiNi thin films. After 120 keV energy proton-irradiation, the fracture strength increased by 8.44%, and the critical stress increased by 21.1%. In addition, the nanoindenter measurement image showed that the hardness of the thin films increased with the increase of proton-irradiation energy. This may be due to the defects caused by irradiation, which strengthen the matrix. 相似文献
14.
《矿物冶金与材料学报》2020,27(2):173-180
Based on a current coherent jet, this study proposes a supersonic combustion (SC) coherent jet in which the main oxygen jet is surrounded by a supersonic fuel gas. The characteristics of the proposed coherent jet are analyzed using experimental methods and numerical simulations in the high-temperature environment of electric arc furnace (EAF) steelmaking. The SC coherent jet achieved stable combustion in the EAF steelmaking environment. The simulated combustion temperature of the supersonic shrouding methane gas was 2930 K, slightly below the theoretical combustion temperature of methane–oxygen gas. The high speed and temperature of the supersonic flame effectively weakened the interaction between the main oxygen jet and the external ambient gas, inhibiting the radial expansion of the main oxygen jet and maintaining its high speed and low turbulence over a long distance. These features improved the impact capacity of the coherent jet and strengthened the stirring intensity in the EAF bath. 相似文献
15.
The wear resistance of iron (Fe)-matrix materials could be improved through the in situ formation of vanadium carbide particles (VCp) with high hardness. However, brittleness and low impact toughness limit their application in several industries due to addition of higher carbon content. Carbon-partitioning treatment plays an important role in tuning the microstructure and mechanical properties of in situ VCp-reinforced Fe-matrix composite. In this study, the influences of carbon-partitioning temperatures and times on the microstructure, mechanical properties, and wear resistance of in situ VCp-reinforced Fe-matrix composite were investigated. The experimental results indicated that a certain amount of retained austenite could be stabilized at room temperature through the carbon-partitioning treatment. Microhardness of in situ VCp-reinforced Fe-matrix composite under carbon-partitioning treatment could be decreased, but impact toughness was improved accordingly when wear resistance was enhanced. In addition, the enhancement of wear resistance could be attributed to transformation-induced plasticity (TRIP) effect, and phase transformation was caused from γ-Fe (face-centered cubic structure, fcc) to α-Fe (body-centered cubic structure, bcc) under a certain load. 相似文献
16.
《矿物冶金与材料学报》2020,27(3):301-309
Effects of calcium compounds on the carbothermic reduction of vanadium titanomagnetite concentrate (VTC) were investigated. It was found that calcium compounds had great effects on the metallization rate of the reduction product, the order of the metallization rate of reduction product being CaCO3 > no additive > CaSO4 > CaCl2, which indicated that the addition of CaCO3 was more conducive to promoting the reduction of iron than other calcium compounds. Gas analysis showed that there were mainly two processes in the carbothermic reduction of VTC, a solid–solid and a solid–gas reaction. The concentrations of CO and CO2 were highest when CaCO3 was added, while that in a roasting system decreased the most when CaCl2 was added. X-ray diffraction (XRD) analysis showed that calcium compounds could change the reduction process of ilmenite in VTC. The phase compositions of the reduction products were changed from metallic iron (Fe) and anosovite (FeTi2O5) to metallic iron (Fe) and perovekite (CaTiO3) when calcium compounds were added. Additionally, CaSO4 and CaCl2 could significantly promote the growth of metallic iron particles, though the existence of Fe-bearing Mg2TiO4 in reduction products was not conducive to the reduction of iron. The formation of FeS would further hinder the reduction of iron after adding CaSO4. 相似文献
17.
《矿物冶金与材料学报》2020,27(7):954-961
Duplex stainless steels (DSSs) used in subsea structures and desalination industries require high corrosion and erosion resistance as well as excellent mechanical properties. The newly introduced cast duplex grade ASTM A890 7A has a unique composition and is expected to have a much better resistance to corrosion and erosion compared with the super-duplex grades 5A and 6A. This work is a comparative study of the mechanical properties, corrosion, and erosion?corrosion resistance of super-duplex grades 5A and 6A and the hyper-duplex grade 7A. The three DSSs exhibited equiaxial austenite islands in the ferrite matrix and balanced phase ratios. The hardness of the grade 7A was nearly 15% higher than those of the super-duplex grades, which is attributed to the effect of the higher contents of W and Mn in 7A. The impact toughness of grade 7A was found to be lower than those of the super-duplex grades due to the carbide precipitation resulting from the partial substitution of Mo with W. The oxide layer strengthening effect of rare earth elements and the higher pitting resistance equivalent number (PREN) of grade 7A resulted in higher corrosion resistance. The harder and more passive grade 7A showed a 35% lower material loss during erosion?corrosion. 相似文献
18.
《矿物冶金与材料学报》2020,27(1):83-90
The effect of single overload on the fatigue crack growth in 2024-T3 and 7075-T6 Al alloys was analyzed. Fatigue tests under constant-amplitude loading with overload peak were carried out on V-notched specimens. Fractographic analysis was used as a principal approach to explain the crack growth retardation due to the overload. Scanning electron microscopy (SEM) analyses were conducted on the fractured surface of failed specimens to study the retardation effect. The obtained results show that the overload application generates a plastic zone in both aluminum alloys. The generated plastic zone is three times larger in the case of 2024-T3 compared to 7075-T6, and thus, a significant crack retardation was induced for 2024-T3. The retardation effect due to the overload for 2024-T3 and 7075-T6 lasted for about 10 mm and 1 mm, respectively, from the point of overload application. 相似文献
19.
The properties of γ-ray-reduced graphene oxide samples (GRGOs) were compared with those of hydrazine hydrate-reduced graphene oxide (HRGO). Fourier transform infrared spectroscopy, X-ray diffractometry, Raman spectroscopy, Brunauer–Emmett–Teller surface area analysis, thermogravimetric analysis, electrometry, and cyclic voltammetry were carried out to verify the reduction process, structural changes, and defects of the samples, as well as to measure their thermal, electrical, and electrochemical properties. Irradiation with γ-rays distorted the structure of GRGOs and generated massive defects through the extensive formation of new smaller sp2-hybridized domains compared with those of HRGO. The thermal stability of GRGOs was higher than that of HRGO, indicating the highly efficient removal of thermally-labile oxygen species by γ-rays. RRGO prepared at 80 kGy showed a pseudocapacitive behavior comparable with the electrical double-layer capacitance behavior of HRGO. Interestingly, the specific capacitance of GRGO was enhanced by nearly three times compared with that of HRGO. These results reflect the advantages of radiation reduction in energy storage applications. 相似文献
20.
《矿物冶金与材料学报》2020,27(1):10-17
Along with slurry concentration and particle density, particle size distribution (PSD) of tailings also exerts a significant influence on the yield stress of cemented paste, a non-Newtonian fluid. In this work, a paste stability coefficient (PSC) was proposed to characterize paste gradation and better reveal its connection to yield stress. This coefficient was proved beneficial to the construction of a unified rheological model, applicable to different materials in different mines, so as to promote the application of rheology in the pipeline transportation of paste. From the results, yield stress showed an exponential growth with increasing PSC, which reflected the proportion of solid particle concentration to the packing density of granular media in a unit volume of slurry, and could represent the properties of both slurry and granular media. It was found that slurry of low PSC contained extensive pores, generally around 20 μm, encouraging free flow of water, constituting a relatively low yield stress. In contrast, slurry of high PSC had a compact and quite stable honeycomb structure, with pore sizes generally < 5 μm, causing the paste to overcome a higher yield stress to flow. 相似文献