Direct electrochemistry and electrocatalysis of horseradish peroxidase in MnO2 nanosheet film

A novel material MnO2 nanosheet has been used as the support matrix for the immobilization of horseradish peroxidase （HRP）. HRP entrapped in MnO2 nanosheet film exhibits facile direct electron transfer with the electron transfer rate constant of 6.86 s^-1. The HRP/MnO2 nanosheet film gives a reversible redox couple with the apparent formal peak potential （E^0＇） of -0.315 V （vs. Ag/AgCl） in pH 6.5 phosphate buffer solution （PBS）. The formal potential E^0＇ of HRP shifts linearly with pH with a slope of -53.75 mV.pH^-1, denoting that an electron transfer accompanies single-proton transportation. The immobilized HRP shows an electrocatslytic activity to the reduction of H2O2. The response time of the biosensor for H2O2 is less than 3 s, and the detection limit is 0.21 μmol · L^-1 based on signal/noise = 3.     

Kinetic studies of the decomposition reaction of adducts of dinuclear Fe(Ⅱ)/O2

Kinetic studies of the decomposition reaction of dinuclear Fe(Ⅱ) adducts [Fe₂(N-Et-HPTB){O₂P(OPh)₂}](Cl- O₄)₂ (1) and [Fe₂(N-Et-HPTB) {O₂P(Ph)₂}] (ClO₄)₂ (2) with O₂ have been carried out at low temperature using UV-vis spectra. The decomposition reaction of Fe(Ⅱ)/O₂ adducts was first-order in the experimental conditions, and the activation parameters were obtained. ?H^¹ = 85.62 kJ·mol^-1, ?S¹ = 19.43 J·mol^-1·K^-1 for compound (1) and ?H^¹ = 97.97 kJ·mol^-1, ?S^¹ = 55.68 J·mol^-1·K^-1 for compound (2). These results are similar to those of dioxygen adducts of other metals complexes and natural enzymes such as methane mono- oxygenase (MMOH).     

Synthesis of layered LiMnO2 by in situ oxidationintercalation and a study of the reaction mechanism and electrochemical performance

Lithium-ion batteries have become the main candi-date for rechargeable power sources in current electronicproducts because of their high open circuit voltage, highenergy density, longevity and absence of memory effect.Layered LiCoO2 has been used commerci…     

A novel Pd/silicalite-1 composite membrane for hydrogen separation

A novel Pd/silicalite-1 composite membrane supported on the macroporous tubular stainless steel substrate was successfully fabricated by electroless plating at 303 K. The structure, morphology and gaseous permeability of the membrane were detected by X-ray diffractiometry （XRD）, scanning electron microscopy （SEM） and single-gas permeation test, respectively. Results confirm the formation of a thin, smooth, and continuous Pd/silicalite-1 composite membrane. The obtained composite membrane shows a high H2 permeance of 1.15×10^-6 mol. m^-2. s^-1. Pa^-1 with moderate H2 selectivity of 250 for H2/N2 at 773 K, at 0.1 MPa pressure drop, suggesting the potential application for H2 separation.     

Trend, seasonal and diurnal variations of atmospheric CO2 in Beijing

The concentration of atmospheric CO₂ in Beijing increased rapidly at a mean growth rate of 3.7% · a⁻¹ from 1993 to 1995. After displaying a peak of (409.7±25.9) μmol · mol⁻¹ in 1995, it decreased slowly. Both the almost stable anthropogenic CO₂ source and increasing biotic CO₂ sink contribute to the drop of CO₂ concentration from 1995 to 2000. The seasonal variation of CO₂ concentration exhibits a clear cycle with a maximum in winter, averaging (426.8±20.6) μmol · mol⁻¹, and a minimum in summer, averaging (369.1±6.1) μmol·mol⁻¹. The seasonal variation of CO₂ concentration is mainly controlled by phenology. The mean diurnal variation of atmospheric CO₂ concentration for a year in Beijing is highly clear: daily maximum CO₂ concentration usually occurs at night, but daily minimum CO₂ concentration does in the daytime, with a mean diurnal difference more than 34.7 μmol·mol⁻¹. It has been revealed that the interannual variations of atmospheric CO₂ concentration in winter and autumn regulated the interannual trend of atmospheric CO₂, whereas the interannual variation of CO₂ concentration in summer affected the general tendency of atmospheric CO₂ in a less degree.     

Flow-injection microcolumn on-line preconcentration for the determination of chromium (VI)

A rapid and sensitive on-line preconcentration method for spectrophotometric determination of chromium (VI) in nature water is described. Preconcentration and determination are based on (i) the quantitative and fast adsorption of chromium (VI) on the high surface area nanometer-size TiO₂ (anatase) powders, which prepared by a sol-gel method from hydrolysis of TiCl₄ and (ii) the quantitative and reproducible elution of Cr (VI) by 2.0 mol·L⁻¹ HCl. A mini-column system for preconcentration is developed, Cr(VI) on the mini-column is eluted and merged with a stream water and DPCB (1,5-diphenylcarbazide) as the chromogenic reagent. The proposed system permits throughputs of 6 sample h⁻¹ (0.001 μg·mL⁻¹ Cr(VI)) or 20 sample h⁻¹ (0.1 μg·mL⁻¹ Cr(VI)). The preconcentration factor is 55. The detection limit is 0.8 ng · mL⁻¹ Cr(VI). The reproducibility is satisfactory with a relative standard deviation of less than 3.35% (0.01 μg·mL⁻¹ Cr(VI),n=5). Supported by the National Natural Science Foundation of China Ma Wanhong: born in 1961, Ph. D. Graduate student, Associate professor     

Investigation of the cross-reaction mechanism of C<Subscript>6</Subscript>H<Subscript>5</Subscript>F-HNO<Subscript>2</Subscript> aqueous solution irradiated at 355 nm by transient absorbance spectrum technique

The transient absorption spectrum technique was employed to investigate the cross-reaction mechanism of C6H5F-HNO2 aqueous solution irradiated at 355 nm. The characteristic and the kinetic parameters of transient species were also detected. Hydroxyl radical derived from the photolysis of HNO2 was added to monofluorobenzene with a second-order rate constant of （5.83±0.17）×10^9 L·mol^-1·s^-1 to form an adduct, C6H5F…OH, which was able to react with HNO2 as the main reaction pathway with a rate constant of （8.3±0.1）×10^7 L·mol^-1·s^-1. The C6F6…OH adduct can also be decayed by elimination of H2O to yield monofluorophenyl radical C6H4F-. By GC-MS technique, the final products were identified to be monofluorophenol, nitro-monofluorobenzene, nitro-monofluorophenol and para-fluorobiphenyl.     

Methane emissions from wetlands on the Qinghai-Tibet Plateau

The areal extent of cold freshwater wetlands on the Qinghai-Tibet Plateau (QTP) is estimated at 0.133 × 10⁶ km², suggesting a significant methane potential. Methane fluxes from wet alpine meadows, peatlands,Hippuris vulgaris mires and secondary marshes were 43.18, 12.96, −0.28 and 45.90 mg · m⁻² · d⁻¹, respectively based on the transect flux studies at the Huashixia Permafrost Station (HPS) from July to August 1996. Average CH₄ fluxes in the thaw season were extrapolated at 5.68 g · m⁻² according to the areal percentage of wetland areas in the Huashixia region. The CH₄ fluxes at four fixed sites, representative of similar ecosystems, ranged from −19.384–347.15 mg · m⁻² · d⁻¹, and the average CH₄ fluxes varied from 6.54 to 71.97 mg · m⁻² · d⁻¹ at each site during the observation period from April to September 1997. The CH₄ emissions at each site during the entire thaw season was estimated from 1.21 to 10.65 g · m⁻², displaying strong spatial variations. Seasonal variations of CH₄ fluxes also were observed at four sites: CH₄ outbursts occurred upon the spring thaw in May and June, CH₄ fluxes increased afterwards with rising soil temperatures. Episodic fluxes were observed in summer, which influenced the average CH₄ fluxes considerably. Annual CH₄ emissions from cold wetlands on the QTP were estimated at about 0.7–0.9 Tg based on the distribution of wetlands, representative CH₄ fluxes, and number of thaw days. The centers of CH₄ releasing were located in the sources of the Yangtze and Yellow rivers, and Zoigê Peatlands.     

石墨相氮化碳表面包覆改善锂离子电池正极材料LiCoO2电化学性能的研究

通过简单的固相法和液相法,分别制备出石墨相氮化碳（g-C₃N₄）表面改性的商品化LiCoO₂复合材料,采用扫描电子显微镜观察改性后的材料,发现g-C₃N₄都均匀地包裹在LiCoO₂表面。两种g-C₃N₄-LiCoO₂复合材料被用作锂离子电池的正极材料,电化学测试结果显示,固相法制得的g-C₃N₄-LiCoO₂复合材料在0.2 C的倍率下充放电测试,首次比容量达167 mA·h·g^-1,循环80次后,比容量仍达132 mA·h·g^-1,高于未经g-C₃N₄包裹的纯LiCoO₂（98 mA·h·g^-1）;液相法制得的Y-C₃N₄-LiCoO₂复合材料循环稳定性明显优于同类材料,循环80次后容量保持率均在95%以上。试验证实,g-C₃N₄表面改性的策略具有一定的实用价值,改性后,材料优异的电化学性能归因于g-C₃N₄的包裹处理,这不仅增强了固体电解质界面（SEI）的稳定性,也抑制了锂离子嵌入/脱出电极材料时引起LiCoO₂体积的变化。     

氮化碳自组装包裹对SnO2TiO2复合锂离子电池负极材料电化学性能的影响

通过简单的石墨相氮化碳(g-C₃N₄)纳米片自组装沉积法,制备了g-C₃N₄包裹的SnO₂-TiO₂纳米复合材料.扫描电子显微镜观察显示,g-C₃N₄均匀地包裹在SnO₂-TiO₂纳米颗粒上.SnO₂-TiO₂-C₃N₄纳米复合材料被用作锂离子电池的负极材料,在0.2C的倍率下循环20次后,比容量达到380.2 mA·h·g^-1,明显高于未经g-C₃N₄包裹的纯的SnO₂(51.6 mA·h·g^-1)和SnO₂-TiO₂纳米复合材料.在0.1~0.5C的倍率充放电测试中,SnO₂-TiO₂-C₃N₄纳米复合材料的比容量仅从490 mA·h·g^-1衰减到330 mA·h·g^-1,高倍率下抗衰减性能优于同类材料.材料优异的电化学性能归功于g-C₃N₄的包裹处理,这不仅增强了固体电解质界面(SEI)的稳定性,也抑制了锂离子嵌入-脱出时SnO₂和TiO₂纳米颗粒的体积变化.     

Fe2O3在锂离子电池负极材料中的研究进展

近年来,锂离子电池被广泛地应用于便携式电子设备和手机,并且对于诸如电动汽车等更高要求的应用而言具有巨大的潜力。作为锂离子电池负极材料,Fe₂O₃是最有可能替代石墨的过渡金属氧化物之一。因其具有高的理论比容量（1 007 mA·h·g^-1）、储量丰富、安全性能好、无毒、环境友好和成本低等一系列优点,被广泛应用于气体传感器、催化和锂离子电池电极材料等领域,是一种具有巨大潜力的电极材料。介绍了锂离子电池的基本结构组成和工作原理,综述了Fe₂O₃的储锂机制和制备方法,总结了近年来Fe₂O₃以及它的复合物作为锂离子电池负极材料的研究进展。     

Application of Nanometer-Size Titanium Dioxide in Extreme-Trace V（Ⅴ） Analysis

0Introduction Vanadiumplaysanimportantroleinmodernindustry,es peciallyinsteelandchemicalindustry.Forinstance,itscompoundsarewidelyappliedintheproceduresofvitrioland petroleumchemicalmanufactureascatalyzers[14].Vanadium hasseveralvalences,butgenerallyitslowvalencesturnintohighoneseasilyinenvironment[5].BecauseV(Ⅴ)isthemost stableandpoisonousone,weoftenlayemphasisonitinenvi ronmentalpollutioncontrol.Vanadiumexistsinenvironmentalwaterwithextremelylowconcentration.Inseawateritscontentislessthan…     

An explanation to the high efficiency ofm-THPC (temporfin) used in photodynamic therapy

Meso-tetrahydroxylphenyl chlorin (m-THPC) is one of the most efficient prospective sensitizers used in photodynamic therapy (PDT). ESR spectroscopy, fluorescence quenching experiments and cyclic voltammogram measurement were used to study its redox properties. The results showed that the ability of m-THPC generating superoxide radical anions was very strong, and the rate constant of m-THPC fluorescence quenching by oxygen k_q (O₂)=1.46×10¹⁰ mol^-1·s^-1. The values of fluorescence quen- ching rate constant of m-THPC by some other electron acceptors, such as methyl viologen (MV²⁺) and anthraquinone (An), were also measured. And they were k_q (MV²⁺)=5.51×10⁹ mol^-1·s^-1, k_q (An)=7.81×10⁹ mol^-1·s^-1. The oxidation potential of m-THPC was examined to be +0.62 V (vs. NHE) in acetonitrile. All these suggested that m-THPC should be a much stronger electron donor than photofrin, the currently used in clinical photodrug, and may react easily through electron transfer with biological matter to yield various radicals. So it seemed reasonable that the type Ⅰ reaction may play an important role in the high activity of m-THPC-PDT.     

Study on the reaction of carbon disulfide with hydroxyl radical in aqueous solution

Carbon disulfide is an important sulfur-containing compound in the environment, and its oxidation produces about 30% of the atmospheric COS[1]. In situ measure- ments show that CS2 is widespread in the sea surface wa- ters[2―4], and more recently, the continental water seems to be especially rich sources of CS2 due to industrial waste- water effluents. It is generally accepted that the ocean is an important source for atm. CS2, and Xie et al.[5] found that marine photochemical reaction of…     

Magnetoelectric and converse magnetoelectric res ponses in TbxDy1-xFe2-y alloy ＆ Pb（Mg1/3Nb2/3）（1-x）TixO3 crystal laminated composites

Measured results of magnetoelectric （ME） and converse magnetoelectric （CME） effects of TbxDy1-xFe2-y/ Pb（Mg1/3Nb2/3）（1-x）TixO3/TbxDy1-xFe2-y （TD/PMNT/TD） and PMNT/TD/PMNT laminated composites are presented. ME effect was determined by measuring laminate voltage output under a Helmholtz-generated AC field biased by a DC field （0-1 kOe） （1Oe = 79.58 A/m）. The CME effect was measured by recording the voltage induced in a solenoid encompassing the ME sample while exposed to a DC bias field and PMNT layer driven by a 10 V AC source. The ME and CME responses in the two laminated structure are linear. The highest values of ME coefficients in TD/PMNT/TD and PMNT/TD/PMNT composites are 384 mV/Oe and 158 mV/Oe, respectively, while the highest values of CME coefficients in the two composites are 118 mG/V and 162 mG/V （1 G=10^-4 T）, respectively.     

Microcalorimetric study on the antibiotic activity of clarithromycin and erythromycin

By using LKB-2277 Bioactivity Monitoring System, the heat effect changes in the process of inhibitory action of clarithromycin and erythromycin onEscherichia coli at 37°C were determined. Quantitative analysis showed that relationship between antibiotic concentrationc and rate contantk ofEscherichia coli growth, and half inhibitory ratio concentration IC₅₀: clarithromycin:k=0. 030 03–1. 1736×10⁻³ c, 8. 45 mg ·L⁻¹; erythromycin:k=0.031 08–8.4657×10⁻⁴ c, 14. 45 mg·L⁻¹. As a result of the microcalorimetry experiments, it not only indicated that antibacterial activity of clarithromycin was stronger than that of erythromycin, but also reported the changeable features of thermodynamics of the bacterial cell in biological, biochemical and metabolic process under different drug action. Foundation item: Supported by Natinal Natural Science Fundation of China (29973030), Natural Science Fundation of Hubei Province (98J052) and Post-doctoral Science Fundation of China Biography, SHEN Xue-song (1956-), Associate professor Research direction: biothermochemistry.     

钴掺杂Mn3O4作为模板制备锂离子电池正极LiMn2O4

以水热合成的钴掺杂Mn₃O₄作为模板,通过固相反应制备尖晶石LiMn₂O₄。XRD谱图和SEM照片显示制备的LiMn₂O₄具有岩石状结构并呈现良好的结晶性,同时Co的引入能够引起LiMn₂O₄晶格的收缩。作为锂离子电池正极材料,Co含量的增加能够提高循环稳定性但降低材料放电比容量,3% Co掺杂的LiMn₂O₄在0.5 C的电流密度下,经过100次循环后,剩余放电比容量达101.6 mAh·g^-1;在10 C的电流密度下,放电比容量可维持在81.0 mAh·g^-1,优于未掺杂的LiMn₂O₄。这是由于Co的引入能够稳定LiMn₂O₄晶体结构并抑制循环中的姜-泰勒扭曲。     

Synthesis, Characterization and Properties of LiFePO4/C Cathode Material

Lithium iron phosphate coated with carbon (LiFePO₄/C) was synthesized by improved solid-state reaction using comparatively lower temperature and fewer sintering time. The carbon came from citric acid, which acted as a new carbon source. It was characterized by thermogravimetry and differential thermal analysis (TG/DTA), X ray diffractometer (XRD), Element Analysis (EA) and Scanning electron microscope (SEM). We also studied the electrochemical properties of the material. The first discharge capacity of the LiFePO₄/C is 121 mAh·g⁻¹ at 10 mA·g⁻¹, at room temperature. When the current density increased to 100 mA·g⁻¹, the first discharge capacity decreased to 110 mAh·g⁻¹ and retained 95% of the initial capacity after 100 cycles. The LiFePO₄/C obtained shows a good electrochemical capacity and cycle ability at a large current density. Foundation item: Supported by the National Natural Science Foundation of China (20071026) Biography: ZHOU Xin-wen (1980-), male, Master, research direction: inorganic material chemistry.     

Degradation of 2, 4-D acid using Mn2+ as catalyst under UV irradiation

In this paper, the oxidative degradation of 2, 4-dichlorophenoxyacetic acid (2, 4-D) using Mn²⁺/H₂O₂ reagent under UV irradiation was studied. The results show that 2, 4-D was degraded more completely in Mn²⁺/H₂O₂ solution than traditional Fenton solutions. The effects of the concentration of Mn²⁺, H₂O₂ and pH were also investigated. And under the optimal condition of 1.48×10⁻⁴ mol/L, 8.99×10⁻⁵ mol/L and pH 3.38, the formation of ·OH was the most, both the decomposition rate of H₂O₂ and the degradation rate of 2, 4-D were the fastest. In addition, the photoreaction process was monitored using spin-trapping electron paramagnetic resonance (EPR), and the results indicated that the oxidative process was predominated mainly by the hydroxyl radical (·OH) gennerated in the system. Biography: HUANG Yingping (1964–), Professor, Ph. D., research direction: pollution ecology and water pollution control.     

Root and xylem ABA changes in response to soil drying in two woody plants

Two woody plants, Platycladus orientalise (tolerant to drought) and Acacia auriculi-formis (sensitive to drought), have been subjected to rapid and slow soil drying. ABA levels in their roots and xylem sap have been determined using radioimmunoassay (RIA, sensitivity is 0.4 pmol per assay vial) with a monoclonal antibody against ( + )-ABA. ABA contents of P. orientalise and A. auriculiformis growing in well watered soil are 0.3 and 2.5 nmol·gDW-1 in roots and 1.6 and 0.4 μmol in xylem saps, respectively. A rapid soil drying has been applied to these two plants with soil water content (SWC) being reduced to 0.02 and 0.06 g·gDW-1 respectively. Under such treatment, ABA was increased by 22 times and 2 times in roots and by 7 times and 34 times in xylem saps respectively for P. orientalise and A. auriculiformis. After rewatering for 6 d, ABA in roots and xylem sap of both species returned to control levels. When a slow soil drying was applied, SWC was reduced to 0.1 and 0.13 g·gDW-1 respectively for P. orientalise and A. auriculiformis. ABA was increased by 5 times and 1.6 times in roots and by 6 times and 19 times in xylem saps respectively for these two plants. ABA in roots and xylem saps decreased to near control levels 8 d after watering. Plant leaf water potentials of both plants hardly changed at times when root and xylem ABA showed substantial increase in response to soil drying. It is concluded that ABA levels in the roots and xylem saps of P. orientalise and A. auriculiformis are more sensitively regulated than leaf water potential in response to soil drying and can act as a chemical signal in root-shoot communications of the drought stress.