经编灯箱布的生产工艺

柔性经编灯箱布产品具有机械强度好、透光适量均匀、印刷后色彩鲜艳夺目、使用方便、气候适应性强以及使用寿命长等特点,在广告媒体中已得到大量应用.文中从原料选用、整经要求、编织工艺直至后整理等对经编灯箱布产品的生产工艺流程进行了系统的论述,对后整理中涂层、贴合两种工艺与参数控制分别作了说明;并简要讨论了编织时布边衬纬纱易出现松弛、后整理贴合牢度不高的问题.     

基于几何模型的纬编提花织物结构计算机辅助设计

通过对构成纬编提花针织物的基本线圈单元进行几何结构分析,建立几何模型,开发了一套纬编提花针织物计算机辅助设计系统。利用该系统,通过输入花型信息及圈高、圈宽、纱线直径等参数,不仅能以图形方式直观地显示针织物的线圈结构形态,还能计算线圈长度等织物结构参数。     

经编针织运动服装的织物性能研究

从人体穿着舒适性能考虑,织物的热湿舒适性越来越成为人们重视的服用性能.本文针对功能性的针织运动服的原料选用和织物组织结构,分析其导湿性.     

The Mechanical Behaviour of Rubber Hose Reinforced with Warp Knitted Fabric

IntroductionBendable pipe is an indispensable non-metallic part ofautomobiles , which is used to transport cooling liquid,hotair and oil media . Auto radiator hose is a bendable rubberhose connecting the water tank ,radiator and engine ,andit is used to transport cooling liquid . Smooth surface ,easy assemblage , high inside pressure bearing capacity ,low radial direction expansion ratio are required. As far asthe mech-anical perfor mance of auto radiator hose isconcerned , ISO4081requires t…     

经编间隔织物缓压性能的探讨

为了比较和研究材料的缓解压力性能，对几种经编间隔针织物与聚氨酯泡沫材料、羊毛地毯进行了实验比较和分析。实验采用压力测量系统，测量使用不同材料时的压强大小和分布情况。通过比较发现，间隔织物缓解压力的效果最佳，并且还对间隔织物缓解压力的原因和影响因素进行了初步的分析和探讨。     

Characterization of Deformations of Multiaxial Warp Knitted Fabrics during Forming Process

The typical structure(with four inserting yarn systems) of multi-axial warp knitted fabrics shows unsatisfactory conformability according to hemisphere pressing experi-ments.The structure containing only two bias inserting yarn systems(TBMWK fabric),however,proves to possess good conformability.This paper characterized in detail the forming behavior of TBMWK fabric.It was found that the two bias inserting yarn systems tend to gather always along the weft direction,and the angles between them along this direction are basically linear to the perpendicular distances from the measured points to the longitudinal axis of the hemisphere.And the     

Research on Tearing Property of Reinforced Plastic Film with Bi - axial Warp Knitted Fabric Skeleton

The specification of laid-in and warp yams,thedensity of fabric and the specification of groundyam are of great importance when the bi-axialwarp knitted fabric being knitted.In this paper,the tearing property of the reinforced plastic filmwith bi-axial warp knitted fabric skeleton istested and analyzed.The resuits show thatamong the three factors,the specification of laid-in and warp yam has the greatest influence onthe tearing strength of the reinforced plastic film,while the rest of them has secondary and lesseffect respectively,and there is exponential re-lation between the tearing strength of the rein-forced plastic film and the number of yams in thedirection of force.     

利用电脑横机生产三维成形产业用针织物

研究了如何在电脑横机上编织三维成形产业用针织物,探讨了三种成形编织技术,介绍了多种三维成形产业用针织物的编织原理.     

以双轴向经编针织物为骨架的增强塑料布撕裂性能的研究

运用正交试验和单因子试验相结合的方法,对以双轴向经编针织物为骨架的增强塑料布的撕裂性能进行了测试分析。结果表明:对于增强塑料布的撕裂性能,衬经衬纬纱的品种影响最大,其次是织物疏密,编链纱品种影响较小;增强塑料布的撕裂性能与受力方向上的纱线根数呈指数相关。     

Computer-aided Pattern Design of Multi-bar Warp Knitted Fabrics

To meet the development trend of multi-bar warp knit-ting machine towards high-speed,advanced technologyand computer control and the requirements of variousproducts with small quantity,there are many researcheson the computer-aided pattern design of multi-barwarp knitted fabrics.In terms of the special propertiesof the computer-aided pattern design of multi-barwarp knitted fabrics,the Object Oriented Program(OOP)programming-Object Windows class Library(OWL)programming is selected.According to thecharacters of the OWL programming,various functionsare defined.Pattern design and technical parameters canbe output,which offers a great convenience for the fac-tory.     

单针床氨纶弹力经编毛圈织物的探讨

单针床氨纶弹力经编毛圈织物的编织，至少要使用三把梳栉。机后两把流栉为地梳栉，机前一把梳栉为毛圈梳栉，并且氨纶弹性纱线应穿在后梳栉上。地组织必须采用针后移针与毛圈沉降片横移同向的经平组织，毛圈组织应采用编链组织。     

多轴向经编增强复合材料拉伸性能的研究

对经编多轴向织物及层合板的拉伸性能进行了较详细的测试及研究,并与传统的机织物增强材料进行了比较,得出了一些结论,为今后经编多轴向增强材料的应用及发展提供了一定的理论基础。     

Tensile Property of Bi-axial Warp Knitted Structure

The tensile property of bi-axial warp knitted fabrics is tested and compared with that of the plain weave fabric. The results show that there are obvious differences between the tensile property of a bi-axial warp knitted fabric and that of a plain weave fabric. The former can give fuller play to the property of a high modulus yarn than the latter. The tensile strength of a bi-axial warp knitted fabric is linear with the number of yarns in the direction of force.     

双轴向经编结构拉伸特性的研究

对机织平纹及双轴向经编织物的拉伸性能进行了测试分析与比较，对双轴向经编织物的拉伸强力与受力方向上的衬经（或衬纬）纱密度的关系进行了回归分析，探讨了双轴向经编织的拉伸特性及优势。     

经编绒类产品的开发和应用

介绍了在单针床经编机和双针床经编机上的不同绒类织物，及在实际中的应用，并且给出了部分成熟工艺。     

无纺布成品表面污渍机器视觉检测系统的设计

无纺布成品表面污渍机器视觉检测系统在保证可靠性、易用性的同时,还要有较低的成本、较高的检测速度和精度.根据此需求,文中设计了一种嵌入式机器视觉检测系统,该系统集成了人机界面,能避免因依赖计算机而造成的易用性问题.文中介绍了该系统的硬件结构,设计了基于动态阈值的污渍判断方法,以保证图像运算的实时性与检测的精度,降低误判率,提高检测的可靠性.实际应用表明,该系统在线速度为300m/min的无纺布成品生产中,能够检测出1mm2的污渍.     

Effect of Run - in Ratios on the Mechanical Properties of Two - Guide Bars Warp - Knitted Fabrics

Warp knitting technology gets rapid development at present and becomes one of the most important parts of the textiles.But it is less known how the parameters of warp knitting technology affect the mechanical properties of warp-knitted fabrics.This paper presents discuss a research on the relationships between run-in ratio and mechanical properties of the two-bar warp-knittedfabrics through the measurement and analysis of the mechanical properties of various samples with different run-in ratios.The optimal run一in ratios for the reasonable mechanical properties are obtained from above dis-     

棉盖涤导湿针织面料的开发

导湿干爽面料是一种新型功能面料，能使人体的汗液导出并保持皮肤的干爽。本文就面料的开发提出一些思路，并对开发的面料的相关性能进行测试。通过对比分析认为棉盖涤面料经亲水性整理具有良好的导湿干爽功能。     

《大提花织物设计》计算机辅助教学软件开发

本课题以三维动画软件为基础。开发出《大提花织物设计》多媒体教掌软件．构件的空间结构和提花机构件各运动过程进行模拟显示．从而使《大提花织物设计》象、具体。该教掌软件能对提花机课堂教掌更为生动、形象、具体。     

针织面料压迫舒适性的评价回顾

介绍了针织面料压迫舒适性的研究现状，对舒适性的评价的内容和方法进行了回顾和总结。