Isothermal oxidation behavior and mechanism of a nickel-based superalloy at 1000℃

The oxidation behavior of a nickel-based superalloy at 1000℃ in air was investigated through X-ray diffraction, scanning electron microscopy, and energy-dispersive spectroscopy analysis. A series of oxides, including external oxide scales (Cr₂O₃, (TiO₂ + MnCr₂O₄)) and internal oxides (Al₂O₃,TiN), were formed on the surface or sub-surface of the substrate at 1000℃ in experimental still air. The oxidation resistance of the alloy was dependent on the stability of the surface oxide layer. The continuity and density of the protective Cr₂O₃ scale were affected by minor alloying elements such as Ti and Mn. The outermost oxide scale was composed of TiO₂ rutile and MnCr₂O₄ spinel, and the growth of TiO₂ particles was controlled by the outer diffusion of Ti ions through the pre-existing oxide layer. Severe internal oxidation occurred beneath the external oxide scale, consuming Al and Ti of the strength phase γ' (Ni₃(Al,Ti)) and thereby severely deteriorating the surface mechanical properties. The depth of the internal oxidation region was approximately 35 μm after exposure to experimental air at 1000℃ for 80 h.     

Isothermal oxidation behavior and mechanism of a nickel-based superalloy at 1000℃

The oxidation behavior of a nickel-based superalloy at 1000°C in air was investigated through X-ray diffraction, scanning electron microscopy, andenergy-dispersive spectroscopy analysis. A series of oxides, including external oxide scales (Cr2O3, (TiO2 + MnCr2O4)) and internal oxides (Al2O3,TiN), were formed on the surface or sub-surface of the substrate at 1000°C in experimental still air. The oxidation re-sistance of the alloy was dependent on the stability of the surface oxide layer. The continuity and density of the protective Cr2O3 scale were affected by minor alloying elements such as Ti and Mn. The outermost oxide scale was composed of TiO2 rutile and MnCr2O4 spinel, and the growth of TiO2particles was controlled by the outer diffusion of Ti ions through the pre-existing oxide layer. Severe internal oxidation oc-curred beneath the external oxide scale, consuming Al and Ti of the strength phaseγ′ (Ni3(Al,Ti)) and thereby severely deteriorating the sur-face mechanical properties. The depth of the internal oxidation region was approximately 35μm after exposure to experimental air at 1000°C for 80 h.     

Coarsening behavior of γ′ and γ″ phases in GH4169 superalloy by electric field treatment

The coarsening behaviors of γ′ and γ″ phases in GH4169 alloy aged at 1023 and 1073 K with electric field treatment (EFT) were investigated by transmission electron microscopy (TEM) and positron annihilation lifetime spectroscopy (PALS). It is demonstrated that precipitation coarsening occurs, and the growth activation energies of γ′ and γ″ phases can be decreased to 115.6 and 198.1 kJ·mol?1, respectively, by applying the electric field. The formation of a large number of vacancies in the matrix is induced by EFT. Due to the occurrence of vacancy migration, the diffusion coefficients of Al and Nb atoms are increased to be 1.6–5.0 times larger than those without EFT at 1023 or 1073 K. Furthermore, the formation of vacancy clusters is promoted by EFT, and the increase in strain energy for the coarsening of γ′ and γ″ phases can be counterbalanced by the formation of vacancy clusters.     

The microstructure evolution and phase transformation behavior of a β-solidifying γ-TiAl alloy during creep

The microstructural evolution and creep behavior of the Ti-43.5Al–4Nb–1Mo-0.1B alloy have been investigated by scanning electron microscope(SEM) and transmission electron microscope(TEM). The excellent creep property was obtained with a fully lamellar(FL) microstructure containing the least grain boundary β_o phase(GB-β_o).TEM results revealed that after creep testing the α₂→βophase transformation was observed in the FL microstructure. The formation βophase is asso...     

Investigation on the homogenization treatment and element segregation on the microstructure of a γ/γ'-cobalt-based superalloy

The aim of the present study was to investigate the effect of element segregation on the microstructure and γ' phase in a γ/γ' cobalt-based superalloy. Several samples were prepared from a cast alloy and homogenized at 1300℃ for different times, with a maximum of 24 h. A microstructural study of the cast alloy using wavelength-dispersive spectroscopic analysis revealed that elements such as Al, Ti, and Ni segregated mostly within interdendritic regions, whereas W atoms were segregated within dendrite cores. With an increase in homogenization time, segregation decreased and the initial dendritic structure was eliminated. Field-emission scanning electron microscopy micrographs showed that the γ' phases in the cores and interdendritic regions of the as-cast alloy were 392 and 124 nm, respectively. The size difference of γ' was found to be due to the different segregation behaviors of constituent elements during solidification. After homogenization, particularly after 16 h, segregation decreased; thus, the size, chemical composition, and hardness of the precipitated γ' phase was mostly uniform throughout the samples.     

Investigation on the homogenization treatment and element segregation on the microstructure of a γ/γ′-cobalt-based superalloy

The aim of the present study was to investigate the effect of element segregation on the microstructure and γ′ phase in a γ/γ′ cobalt-based superalloy. Several samples were prepared from a cast alloy and homogenized at 1300°C for different times, with a maximum of 24 h. A microstructural study of the cast alloy using wavelength-dispersive spectroscopic analysis revealed that elements such as Al, Ti, and Ni segregated mostly within interdendritic regions, whereas W atoms were segregated within dendrite cores. With an increase in homogenization time, segregation decreased and the initial dendritic structure was eliminated. Field-emission scanning electron microscopy micrographs showed that the γ′ phases in the cores and interdendritic regions of the as-cast alloy were 392 and 124 nm, respectively. The size difference of γ′ was found to be due to the different segregation behaviors of constituent elements during solidification. After homogenization, particularly after 16 h, segregation decreased; thus, the size, chemical composition, and hardness of the precipitated γ′ phase was mostly uniform throughout the samples.     

Inorganic chemical composition and source signature of PM2.5 in Beijing during ACE-Asia period

Aerosol samples for PM2.5 were collected in Beijing for 38 consecutive days from March to April 2001 using an IMPROVE Sampler. Concentrations of 20 elements in PM2.5 were determined using a PIXE method. Results show that the average mineral dust concentration of PM2.5 was 14.6 Ilg/m3 during the observation period. On the sand-dust event days of March 21 and April 10, dust PM2.5 mass concentrations were 62.4 and 54.1 μg/m^3, respectively.These demonstrate that fine particle pollution by dust event in Beijing was very severe. The enrichment factors of S and Cu reached minimums on the dusty days and were high on the non-dusty days. It is considered that enrichment factors of elements in PM2.5, which are associated with human activities, can probably provide an effective method to distinguish local sources from external sources of dust. Factor analysis on the chemical composition in PM2.5 shows that sources of crustal matters, anthropogenic emission, and oil combustion contributed to PM2.5 levels in air in the springtime of 2001 in Beijing.     

Influence of PrP 106―126 on expression of laminin and fibronectin in astrocyte

Astrogliosis is a hallmark of prion disease, but the metabolic alterations of astrocytes remain poorly documented. A synthetic peptide corresponding to amino acid 106―126 of the human prion protein (PrP) has been shown to be toxic to neurons. In this study, the effects of PrP 106―126 on astrocytes were investigated in vitro. The proliferation of astrocytes was significantly (P < 0.05) increased when grown in media conditioned with PrP 106―126 (80 μmol/L) from microglia. The expression of laminin (LN) and fibronectin (FN) was examined at both mRNA and protein levels. The results showed that ex- posure of astrocytes to PrP 106―126 enhanced the expression of LN and FN. The increase of FN in astrocyte cultures required cytokines previously released by activated microglia. This study reveals the expression of LN and FN affected by PrP106―126.     

Influence of PrP 106―126 on expression of laminin and fibronectin in astrocyte

Astrogliosis is a hallmark of prion disease, but the metabolic alterations of astrocytes remain poorly documented. A synthetic peptide corresponding to amino acid 106-126 of the human prion protein （PrP） has been shown to be toxic to neurons. In this study, the effects of PrP 106-126 on astrocytes were investigated in vitro. The proliferation of astrocytes was significantly （P 〈 0.05） increased when grown in media conditioned with PrP 106-126 （80 μmol/L） from microglia. The expression of laminin （LN） and fibronectin （FN） was examined at both mRNA and protein levels. The results showed that exposure of astrocytes to PrP 106-126 enhanced the expression of LN and FN. The increase of FN in astrocyte cultures required cytokines previously released by activated microglia. This study reveals the expression of LN and FN affected by PrP106-126.     

Influence of vegetations and snow cover on sand-dust events in the west of China

THE CLIMATE SYSTEM IS HIGHLY SENSITIVE TO THE CHANGE OF LAND SURFACE FEATURE INDUCED BY NATURE OR HUMAN ACTIVITY. THE TEMPORAL-SPATIAL CHANGES OF LAND SURFACE TYPES ARE ABLE TO CAUSE AN ANISOTROPIC DISTRIBUTION OF PHYSICAL CHARACTER AT LAND SURFACE, LEADI…     

Investigation on the dissolution of η phase in a cast Ni-based superalloy

The dissolution behavior of η phase has been investigated in a cast Ni-based superalloy. The results showed that the platelets and blocks of η phase were formed within the interdendritic regions of the microstructure. Applying standard solution annealing at 1150–1160℃ for a period of 4 h did not result in the complete dissolution of η phase. For the complete dissolution of η phase without residual incipient melting, a 2-step solution annealing has been recommended. After dissolution at high temperatures, the η phase transforms to two MC-type carbides: one is enriched in Ti, Nb, and Ta, and the other is of (Zr,Ti)C type.     

Influence of the Mode of Wavelength on the Infrared Reflectance and Transmittance in the Fabric

The study and the practical utilization of the infrared inthe textile field is analysed simply.The test method ofthe infrared transmittance(α_T)and the reflectance(α_R)in the fabric is introduced.The test results of aset of polyester/cotton plain fabrlcs show that the infra-red reflecting regulation can be expressed by quasi-co-sine function.The parameters affecting the α_T and α_Rare analysed, α_T decreases according to negative expo-nent function as the weight per square meter of the fab-ric increases,and α_R increases.Both α_T and α_R will in-crease when the mode of wavelength(λ_m) of the infra-red decreases.It can be deduced that the infrared ab-sorptance of the fabric will increase as λ_m increases inthe studied range.     

Influence of Flux and Sulfur on YAG Laser Welding

1　IntroductionYAGlaserweldingprocesscanbeconductedbyarobotusinganopticalfibertotransferthelaserenergyontoaworkpieceduetoitssmallwavelength (1.0 6mm ) .ThustheweldingautomationlevelcanbehighlyincreasedcomparedwithCO2 laserwelding .Therefore ,recentlyyears ,YAGlaserweldingprocesshasbeenquicklydevelopedandappliedformanufac turingofautomobileandchemicalvesselsetc .Gener ally ,thepowerofaCWYAGlaserisnotsohigh (sofarupto 10kW )duetoitslowefficiencyofenergyconversion .Whenweldingwithamiddleorl…     

Effect of solution cooling rate on the γ′ precipitation behaviors of a Ni-base P/M superalloy

The effect of cooling rate on the cooling γ' precipitation behaviors was investigated in a Ni-base powder/metallurgy (P/M) superalloy (FGH4096). The empirical equations were established between the cooling rate and the average sizes of secondary and tertiary γ' precipitates within grains and tertiary γ' precipitates at grain boundaries, as well as the apparent width of grain boundaries. The results show that the average sizes of secondary or tertiary γ' precipitates are inversely correlated with the cooling rate. The shape of secondary γ' precipitates within grains changes from butterfly-like to spherical with the increase of cooling rate, but all the tertiaryγ' precipitates formed are spherical in shape. It is also found that tertiary γ' may be precipitated in the latter part of the cooling cycle only if the cooling rate is not faster than 4.3℃/s, and the apparent width of grain boundaries decreases linearly with the increase of cooling rate.     

Effect of UPP on the expression of VEGF and its receptors in mouse uterus during peri-implantation

On day 3 of gestation ,one uterine horn of female pregnant mouse was injected intraluminally with 5 μL 0.1μg/mL lactacystin,a specific inhibitor of ubiquitin-pro-teasome pathway (UPP),while the contralateral horn served as control ,Animals were sacrificed by cervical dislocation on day 5,6,7 of gestation ,respectively,Then the number of implanted embryos in each uterine horn was calcuated,and the expression of VEGF and its receptors was examined,The data showed that the number of implanted embryos was decreased significantly after treatment with lactacystin ,The results of RT-PCR and Western blot indicated that expression of VEGF and its receptors at mRNA and protein levels was significantly decreased in the treated uterus,menawhile,the expression of HIF-1α(the α subunit of HIF ,a transcrip-tional factor of VEGF) was reduced at both mRNA and protein levels,These data suggested that the effect of UPP on VEGF expression was realized through regulating HIF-1α expression .In addition ,UPP is likely to take part in the modulation of VEGF receptors expression ,These changes may be one of the reasons for the reduction of implanted embryos.     

Effects of hot compression deformation temperature on the microstructure and properties of Al-Zr-La alloys

The main goal of this study is to investigate the microstructure and electrical properties of Al-Zr-La alloys under different hot compression deformation temperatures. In particular, a Gleeble 3500 thermal simulator was used to carry out multi-pass hot compression tests. For five-pass hot compression deformation, the last-pass deformation temperatures were 240, 260, 300, 340, 380, and 420℃, respectively, where the first-pass deformation temperature was 460℃. The experimental results indicated that increasing the hot compression deformation temperature with each pass resulted in improved electrical conductivity of the alloy. Consequently, the flow stress was reduced after deformation of the samples subjected to the same number of passes. In addition, the dislocation density gradually decreased and the grain size increased after hot compression deformation. Furthermore, the dynamic recrystallization behavior was effectively suppressed during the hot compression process because spherical Al₃Zr precipitates pinned the dislocation movement effectively and prevented grain boundary sliding.     

An experimental study on variation of thermal fields during the deformation of a compressive en echelon fault set

The temperature variations during deformation of a compressive en echelon fault set in a rock sample were measured by a surface measurement system with multi-point platinum resistance thermometers and an infrared thermal image system. The measurements obtained by the two systems were in agreement with each other, indicating a relationship between temporal-spatial variations of the thermal field and changes of stress and strain. At varied structural positions of the rock sample, the rising of the temperature was different, implying distinct stress distributions at these positions. In the experiment, the deformation process of the sample included three stages: elastic deformation, stick-slip, and rupture. Correspondingly, the variation process of temperature had also three stages, each of which had its own temperature rising profile. And the thermal radiation field showed a similar process. These phenomena mean that the dominant mechanisms of temperature rising in all stages of deformation are different. Experimental results provide a physical basis for the study of current fault activities by using data of satellite infrared images.