具有良好可再生性的新型二氧化硅磁性氧化石墨烯纳米复合材料

Graphene oxide (GO) wrapped Fe₃O₄ nanoparticles (NPs) were prepared by coating the Fe₃O₄ NPs with a SiO₂ layer, and then modifying by amino groups, which interact with the GO nanosheets to form covalent bonding. The SiO₂ coating layer plays a key role in integrating the magnetic nanoparticles with the GO nanosheets. The effect of the amount of SiO₂ on the morphology, structure, adsorption, and regenerability of the composites was studied in detail. An appropriate SiO₂ layer can effectively induce the GO nanosheets to completely wrap the Fe₃O₄ NPs, forming a core-shell Fe₃O₄@SiO₂@GO composite where Fe₃O₄@SiO₂ NPs are firmly encapsulated by GO nanosheets. The optimized Fe₃O₄@SiO₂@GO sample exhibits a high saturated adsorption capacity of 253 mg·g?1 Pb(II) cations from wastewater, and the adsorption process is well fitted by Langmuir adsorption model. Notably, the composite displays excellent regeneration, maintaining a ~90% adsorption capacity for five cycles, while other samples decrease their adsorption capacity rapidly. This work provides a theoretical guidance to improve the regeneration of the GO-based adsorbents.     

微波预处理对复杂铜矿磨矿及浮选动力学的影响

The effect of CaCO₃, Na₂CO₃, and CaF₂ on the reduction roasting and magnetic separation of high-phosphorus iron ore containing phosphorus in the form of Fe₃PO₇ and apatite was investigated. The results revealed that Na₂CO₃ had the most significant effect on iron recovery and dephosphorization, followed by CaCO₃, the effect of CaF₂ was negligible. The mechanisms of CaCO₃, Na₂CO₃, and CaF₂ were investigated using X-ray diffraction (XRD), scanning electron microscopy and energy dispersive spectrometry (SEM–EDS). Without additives, Fe₃PO₇ was reduced to elemental phosphorus and formed an iron–phosphorus alloy with metallic iron. The addition of CaCO₃ reacted with Fe₃PO₇ to generate an enormous amount of Ca₃(PO₄)₂ and promoted the reduction of iron oxides. However, the growth of iron particles was inhibited. With the addition of Na₂CO₃, the phosphorus in Fe₃PO₇ migrated to nepheline and Na₂CO₃ improved the reduction of iron oxides and growth of iron particles. Therefore, the recovery of iron and the separation of iron and phosphorus were the best. In contrast, CaF₂ reacted with Fe₃PO₇ to form fine Ca₃(PO₄)₂ particles scattered around the iron particles, making the separation of iron and phosphorus difficult.     

不同硅饱和系数水榴石的碳酸化分解动力学

Carbonated decomposition of hydrogarnet is one of the vital reactions of the calcification–carbonation method, which is designed to dispose of low-grade bauxite and Bayer red mud and is a novel eco-friendly method. In this study, the effect of the silica saturation coefficient (x) on the carbonation of hydrogarnet was investigated from the kinetic perspective. The results indicated that the carbonation of hydrogarnets with different x values (x = 0.27, 0.36, 0.70, and 0.73) underwent two stages with significantly different rates, and the kinetic mechanisms of the two stages can be described by the kinetic functions R3 and D3. The apparent activation energies at Stages 1 and 2 were 41.96–81.64 and 14.80–34.84 kJ/mol, respectively. Moreover, the corresponding limiting steps of the two stages were interfacial chemical reaction and diffusion.     

一种超重力燃烧合成制备高性能高熵合金的新方法

A new method of high-gravity combustion synthesis (HGCS) followed by post-treatment (PT) is reported for preparing high-performance high-entropy alloys (HEAs), Cr_0.9FeNi_2.5V_0.2Al_0.5 alloy, whereby cheap thermite powder is used as the raw material. In this process, the HEA melt and the ceramic melt are rapidly formed by a strong exothermic combustion synthesis reaction and completely separated under a high-gravity field. Then, the master alloy is obtained after cooling. Subsequently, the master alloy is sequentially subjected to conventional vacuum arc melting (VAM), homogenization treatment, cold rolling, and annealing treatment to realize a tensile strength, yield strength, and elongation of 1250 MPa, 1075 MPa, and 2.9%, respectively. The present method is increasingly attractive due to its low cost of raw materials and the intermediate product obtained without high-temperature heating. Based on the calculation of phase separation kinetics in the high-temperature melt, it is expected that the final alloys with high performance can be prepared directly across master alloys with higher high-gravity coefficients.     

利用皮秒激光烧蚀制备非球形铝纳米颗粒

We report the picosecond laser ablation of aluminum targets immersed in a polar organic liquid (chloroform, CHCl₃) with ~2 ps laser pulses at an input energy of ~350 μJ. The synthesized aluminum nanoparticles exhibited a surface plasmon resonance peak at ~340 nm. Scanning electron microscopy images of Al nanoparticles demonstrated the spherical morphology with an average size of (27 ± 3.6) nm. The formation of smaller spherical Al nanoparticles and the diminished growth could be from the formation of electric double layers on the Al nanoparticles. In addition to spherical aluminum nanoparticles, triangular/pentagonal/hexagonal nanoparticles were also observed in the colloidal solution. Field emission scanning electron microscopy images of ablated Al targets demonstrated laser induced periodic surface structures (LIPSSs), which were the high spatial frequency LIPSSs (HSF-LIPSSs) since their grating period was ~280 nm. Additionally, coarse structures with a period of ~700 nm were observed.     

窄板坯结晶器内连铸工艺参数对钢液流场的影响

Computational simulations and high-temperature measurements of velocities near the surface of a mold were carried out by using the rod deflection method to study the effects of various operating parameters on the flow field in slab continuous casting (CC) molds with narrow widths for the production of automobile exposed panels. Reasonable agreement between the calculated results and measured subsurface velocities of liquid steel was obtained under different operating parameters of the CC process. The simulation results reveal that the flow field in the horizontal plane located 50 mm from the meniscus can be used as the characteristic flow field to optimize the flow field of molten steel in the mold. Increases in casting speed can increase the subsurface velocity of molten steel and shift the position of the vortex core downward in the downward circulation zone. The flow field of liquid steel in a 1040 mm-wide slab CC mold can be improved by an Ar gas flow rate of 7 L·min?1 and casting speed of 1.7 m·min?1. Under the present experimental conditions, the double-roll flow pattern is generally stable at a submerged entry nozzle immersion depth of 170 mm.     

电渣重熔脱硫技术研究进展

Electroslag remelting (ESR) gives a combination of liquid metal refining and solidification structure control. One of the typical aspects of liquid metal refining during ESR for the advanced steel and alloy production is desulfurization. It involves two patterns, i.e., slag–metal reaction and gas–slag reaction (gasifying desulfurization). In this paper, the advances in desulfurization practices of ESR are reviewed. The effects of processing parameters, including the initial sulfur level of consumable electrode, remelting atmosphere, deoxidation schemes of ESR, slag composition, melting rate, and electrical parameters on the desulfurization in ESR are assessed. The interrelation between desulfurization and sulfide inclusion evolution during ESR is discussed, and advancements in the production of sulfur-bearing steel at a high-sulfur level during ESR are described. The remaining challenges for future work are also proposed.     

Mineral transition and formation mechanism of calcium aluminate compounds in CaO?Al2O3?Na2O system during high-temperature sintering

The mineral transition and formation mechanism of calcium aluminate compounds in CaO?Al₂O₃?Na₂O system during the high-temperature sintering process were systematically investigated using DSC?TG, XRD, SEM?EDS, FTIR, and Raman spectra, and the crystal structure of Na₄Ca₃(AlO₂)₁₀ was also simulated by Material Studio software. The results indicated that the minerals formed during the sintering process included Na₄Ca₃(AlO₂)₁₀, CaO·Al₂O₃, and 12CaO·7Al₂O₃, and the content of Na₄Ca₃(AlO₂)₁₀ could reach 92wt% when sintered at 1200°C for 30 min. The main formation stage of Na₄Ca₃(AlO₂)₁₀ occurred at temperatures from 970 to 1100°C, and the content could reach 82wt% when the reaction temperature increased to 1100°C. The crystal system of Na₄Ca₃(AlO₂)₁₀ was tetragonal, and the cells preferred to grow along crystal planes (110) and (210). The formation of Na₄Ca₃(AlO₂)₁₀ was an exothermic reaction that followed a secondary reaction model, and its activation energy was 223.97 kJ/mol.     

含细夹层的分矿充填层中流动特性的可视化

Ore particles, especially fine interlayers, commonly segregate in heap stacking, leading to undesirable flow paths and changeable flow velocity fields of packed beds. Computed tomography (CT), COMSOL Multiphysics, and MATLAB were utilized to quantify pore structures and visualize flow behavior inside packed beds with segregated fine interlayers. The formation of fine interlayers was accompanied with the segregation of particles in packed beds. Fine particles reached the upper position of the packed beds during stacking. CT revealed that the average porosity of fine interlayers (24.21%) was significantly lower than that of the heap packed by coarse ores (37.42%), which directly affected the formation of flow paths. Specifically, the potential flow paths in the internal regions of fine interlayers were undeveloped. Fluid flowed and bypassed the fine interlayers and along the sides of the packed beds. Flow velocity also indicated that the flow paths easily gathered in the pore throat where flow velocity (1.8 × 10?5 m/s) suddenly increased. Fluid stagnant regions with a flow velocity lower than 0.2 × 10?5 m/s appeared in flow paths with a large diameter.     

黎卡提方程可积的三个充分条件

本文对不能直接用初等积分法求解的黎卡提方程给出了可积的三个充分条件。     

一般二元二次丢番图方程的解法

给出了若干个关于二元二次丢番图方程 ax2 bxy cy2 dx ey f=0整数解的定理 ,系统地解决了二元二次丢番图方程的求解问题     

相对论关联动力问题三种解法的层次分析

相对论关联动力论有几种理论框架，它们的目标和条件是相同的，但解法并不相同，本文从力学和统计层次的角度出发，分析了三种主要解法的基本特征，并采用多系缩得出了推广的刘维尔方程和Ｋｉｍｏｎｔｏｖｉｃｈ方程。     

三维赫姆霍兹椭圆边值的新型积分方程

给出了两类新型积分方程．一类是以守恒积分为工具，推导出三维赫姆尼兹椭圆边值的新型积分方程，其类型与经典方程不同，关于未知势是第一类Ｆｒｅｄｈｏｌｍ积分方程，与经典方程互补．另一类是利用傅氏变换，分离变量及傅里叶级数给出了三种典型域上的泊松积分公式和正则积分方程     

二阶常微分与Riccati方程

给出了变系数二阶齐次线性常微分方程的一种积分形式解和几类变系数二阶齐线性常微分方程的普遍解。     

一类简单黎卡提方程的求解

有初等解法的微分方程是很有限的,形式上很简单的黎卡提方程对一般的P(x),Q(x),R(x)而言,就没有初等解法,该文讨论满足一定条件的黎卡提方程的初等解法.     

几类特殊的常微分方程

本文给出了几类特殊的常微分方程并提供了求解方法，推广了伯努利方程。     

组合KdV与MKdV方程Backlund变换及其一类精确解

利用齐次平衡法得到了组合KdV和MKdV方程的Backlund变换,不仅扩充了有关文献的求解结果,并且给出了求组合KdV与MKdV方程解的一般方法,并由此得到了一些精确解,通过对方程的特殊化,还可得到MKdV方程的Backlund变换及求解公式。     

利用克莱洛(Clairaut)方程求二次曲线

利用著名的克莱洛方程的几何意义求二次曲线方程,就是建立克莱洛方程的一般模型,进一步揭示出克莱洛方程的通解与奇解,从动直线与动点两个方面来认识曲线的结构.     

三类方程在微积分中若干典型应用

讨论以代数方程、微分方程、函数方法、差分方程为工具,解决微积分中的各类常见问题的典型方法,内容包括极限、定积分、重积分、变限积分、级数的展开与求和,辅助函数的构造等各方面的常见题型。在[1]中我们讨论了代数方程,微分方程的应用,在此我们将着重讨论函数方程,差分方程及微分方程在更广泛的问题中的典型应用。