BT灌浆料在桥梁工程中的施工技术

义乌丹溪大桥是我国第一座斜靠式系杆拱桥,其拱管内部采用灌浆料进行灌浆,以提高拱桥的受力能力。BT灌浆料作为一种新型材料,在桥梁工程的施工中并不多见,通过对该桥灌浆过程的施工进行总结,为桥梁灌浆施工提供了参考。     

某特大桥箱梁架设施工控制技术

结合实体工程,详细阐述了特大桥箱梁运输和架设施工,施工检测和工后跟踪观测结果表明,该大桥箱梁架设是成功的,为桥梁架设施工积累了新的技术资料。     

架梁便桥搭设施工方案

0．概况达成扩能引入成都枢纽相关工程SDK0＋641．6西江河特大桥和SDK3＋201石家沟大桥下部工程已基本完成，两座大桥具备架梁施工条件。根据现场施工条件，西江河大桥、石家沟大桥均从石板滩向重庆方向架设。桥梁架设拟采用架桥机架设，梁车存放在石板滩大修段D1、D2道。拆除既有D5道安全线车档，将线路向左侧拨移，铺设架梁便线至西江河0#台尾．需在K20＋129．3框架左侧搭设架梁便桥。     

主缆架设过程中风载下索股与猫道横向变形分析

通过建立猫道和主缆索股空间模型,计算分析了舟山连岛工程西堠门大桥主缆架设过程中索股与猫道的横向变形.探讨了西堠门大桥主缆架设期间不同工况中索股在各级风载下的横向变形规律,结合猫道在不同级风载作用下的横向变形,通过索股和猫道相对横向变形量确定出猫道上可供主缆架设施工的风速.     

北盘江大桥悬索桥钢桁加劲梁施工技术

北盘江大桥为主跨636 m单跨双铰钢桁加劲梁悬索桥.介绍北盘江大桥钢桁加劲梁拼装、架设施工技术.     

固城大桥85m系杆拱桥设计与施工

固城大桥是123省道双牌石至狸桥段上的一座大桥,位于固城镇西,桥梁上部结构主桥为85m钢管混凝土系杆拱,引桥为装配式部分预应力混凝土连续箱梁。主要介绍主桥的设计特点和架设方案。     

广州珠江黄埔大桥北汊斜拉桥主跨过渡墩附近梁段架设技术

主要介绍了广州珠江黄埔大桥北汉斜拉桥主跨过渡墩附近梁段架设,解决了主跨过渡墩受到河滩潮位以及地形的限制的问题及为墩顶梁段架设提供新思路,该部分钢箱梁架设方法因地制宜,为同类型桥梁的施工提供了一个典型的范例,并取得了显著的经济效益。     

200t50m双导梁架桥机下坡架设小半径曲线桥施工技术

通过介绍保阜高速14标段圣水村大桥利用邯郸北恒工程机械有限公司生产的200t50m双导梁架桥机架设小半径曲线桥施工技术．为类似桥梁的过孔及架设提供参考。     

浅谈悬索桥主缆架设测量控制

以大桥悬索桥为例,论述了主缆架设测量的主要内容及技术控制措施,为今后类似工程提供实践参考数据及经验。     

孟加拉帕德玛大桥铁路连接线项目节段梁预制架设施工与线形控制

为分析研究短线法节段预制拼装箱梁施工技术和施工控制方法,本文依托帕德玛大桥铁路连接线项目,介绍了该项目节段预制施工和架设施工关键技术,计算并分析了预制架设施工关键过程结构的应力和变形情况。应力计算结果表明,结构在施工过程中安全可靠,位移计算结果可为预制阶段预拱度设置和梁长控制提供依据。后续架设阶段跨间接缝宽度偏差较小验证了节段预制过程中单个梁段及单跨总梁长控制计算方法的有效性,节段梁预制和架设控制结果表明：预制误差基本控制在±3 mm,架设完成后线形误差约为6 mm,控制精度较高,施工和控制经验可为同类桥梁施工提供借鉴和参考。     

卢浦大桥健康监测系统通信网络设计

以卢浦大桥健康监测为背景 ,阐明了大型桥梁监测系统的总体结构 ;设计了多种通信节点 ;探讨了局部控制网 (LONWORKS)总线网络服务 (LNS)的一些实际应用 ;解决了LNS环境下LONWORKS网络管理程序与其他应用分析软件的接口问题 .卢浦大桥现场使用结果表明 ,该系统完全满足桥梁健康监测的要求 ,并有很高的可靠性 .     

Construction and control technology of the main bridge superstructure of Sutong Bridge

The Sutong Yangtze River Bridge （short as Sut.ong Bridge） is now the largest span cable-stayed bridge in the world. The construction of the superstructure of the middle bridge covered several stages including erection of the big block girders for the side span, assistant span and tower area, erection of standard girders and closure of the middle span. The big block girders were hoisted by a floating crane, and the standard girders were hoisted by a double crane system on the deck. The pushing assistant method was adopted for the middle span closure construction. Furthermore, key technologies and innovative methods used in the processes of girder erection and cable assemblage in all stages were expatiated systematically. An all-stage self- adaptive geometry control method was used in the construction process. By accurately controlling the unstressed dimensions and shape of all structural components in each step, and realization that the control system and the controlled system adapt to each other, the goal was to make control of the final line shape and inner force of the bridge structure achievable. Two solutions, including GPS based and total station based dynamic geometry monitoring systems, were used to resolve the measure problem under the wide - range of wind-induced vibrations in the long cantilever state. Finally, research on the wind-induced vibration of the superstructure during the construction period was executed. Buffeting response analysis to the longest single and double cantilever states were carried out. The analysis and evaluation of wind resistance safety of the main girders under the longest single cantilever state was made, and corresponding wind resistance measures were suggested. The as-built geometric error and cable force error were controlled in a required design range, and this whole technological achievement can be a benchmark for construction of other large span cable-stayed bridges in the future.     

沪昆客专北盘江特大桥设计与施工方案

沪昆客专长沙至昆明段北盘江特大桥主跨采用世界最大跨度的445m劲性骨架钢筋混凝土拱桥结构,也是客运专线铁路中跨度最大的拱桥结构。由于高速铁路桥梁对刚度和线路平顺性的特殊要求,对设计与施工提出了极高的标准,系统介绍了该桥的设计和施工方案。     

预应力混凝土组合桁架拱桥主要参数分析

组合桁拱是桁架拱和桁架梁的继承和发展,它结合了桁架拱和桁架梁的优点,组合成一种新的组合桁拱体系,它既有桁架梁的受力特点,又发挥了桁架拱的优势,并利用预应力技术,使组合桁拱的杆件断面设计得既轻又美观,跨越能力更大,在大跨径桥梁结构中占有一席之地,目前最大跨径为３３０ｍ,为此以浙江省千岛湖石门大桥为工程背景,对影响组合桁拱结构受力性能的设计参数进行了分析,结合组合杵拱桥施工方法,提出了组合桁拱的设计参     

Closure technique for the hybrid girder cable stayed bridge of Edong Bridge

Based on Edong Yangtze River Bridge, which is the second longest hybrid girder cable stayed bridge with 926 m long main span, the influencing factors and crucial techniques of the main span closure method for long span hybrid girder cable stayed bridge are studied. After theoretical analysis, numerical evaluation and practical test, the loading assistant closure method is employed in Edong Yangtze River Bridge. The loading assistant closure method, with better thermal adaptability and less influence on bridge line and the forced status, can meet the requirements of the unstressed state control method. Based on the mentioned advantages, the loading assistant closure method is applicable to long span hybrid girder cable stayed bridges. The conclusion can provide a reference for the further design of the similar bridges.     

弘扬重商精神，培育多元文化

义乌是一座没有围墙的城市，190多个国家和地区的1万多名海外客商因为义乌国际商贸城的无穷’商机来到这里，因为这座城市的雍容大度而在此常住。多元文化的培育使很多外商乐于在这里生存、发展，多元文化的撞击也极大地推动和促进着义乌区域经济的快速、健康发展。可以说，对自古以来重商精神的弘扬以及对多元文化的精心培育成就了义乌这厘国际化的商贸城市。     

武夷山市公馆大桥静载试验分析

武夷山市公馆大桥为 3孔中承式钢筋砼拱桥 .大桥建成后通过汽车静载测试 ,对测试结果进行了整理 ,并与理论计算进行对比 ,从而判断武夷山市公馆大桥整体结构的安全承载能力和使用条件 .     

福州江心公园悬索桥的设计构思

福州江心公园悬索桥是一座主跨为１５０ｍ的钢筋混凝土加劲桁架悬索桥．本文就该桥的设计构思，总体布置，构造特点和制作安装进行分析研究，并探讨了混凝土桁架，边跨与主跨比，主缆线型的控制和锚锭基础等有关问题     

Research on the special lifting devices for steel box girders of Sutong Bridge

Sutong Bridge is a cable-stayed bridge with a steel box girder and a main span of 1 088 m. The steel box girder of main span includes five portions ： back span large unit, large block of pylon, standard girder, back span closure girder and middle span closure girder. Each back span large unit is fabricated by welding several deck segments together in factory, and is erected by floating crane. As navigational clearance of the main bridge is high, the traditional truss lifting device can＇ t satisfy the requirement of domestic lifting cranes for this kind of lifting height and weight. Hence, a kind of lighter lifting device for the erection of back span large units was accepted for this bridge. In this paper, the design and use of this lifting device is introduced. The upper structure used lifting gantry to install the standard girder segment by cantilever method. Because the bridge＇ s navigation clearance is high, and the girder segment is wide and heavy, the meteorology and hydrology condition of the bridge district is abominable, and the requirements of long cable girder side pull-in, structure and performance propose high request to the lifting gantry. In this paper, the design and use key point of long cable pull-in angle adjustment device integrate into lifting gantry, is introduced.     

牡丹江大桥水文计算与桥位设计

通过牡丹江大桥的水文计算 ,拟定出符合实际的桥梁孔径 ,并计算出桥面标高与冲刷深度