TiO2/CB-NiCo2O4修饰玻碳电极的制备及其对葡萄糖的电化学测定

利用低温下的水化学生长法合成了镍钴氧化物（NiCo₂O₄）纳米针,因其自组装而表现出立方晶相,再用二氧化钛/炭黑（TiO₂/CB）对NiCo₂O₄表面进行了改性,合成了TiO₂/CB-NiCo₂O₄复合纳米材料.用X射线光电子能谱仪（XPS）、扫描电子显微镜（SEM）、能量色散X射线光谱仪（EDX）图谱对材料的形貌进行了表征,运用循环伏安法（CV）、时间-电流（i-t）曲线法考察了TiO₂/CB-NiCo₂O₄修饰玻碳电极的电化学行为.实验发现：TiO₂/CB-NiCo₂O₄修饰电极对葡萄糖的氧化有良好的电催化性能,其线性范围为0.001~1.780 mmol·L^-1,检测限为0.53 μmol·L^-1（信噪比S/N=3）.将该法用于实际样品中葡萄糖的测定,结果令人满意.     

二维NiFe-LDH/Mo(OS)x纳米片协同促进电催化析氧反应

过渡族金属基二维纳米材料作为电催化析氧反应（oxygen evolution reaction, OER）催化剂具有巨大的潜力。通过原位电沉积法,在泡沫镍基底表面制备了二维层状镍铁双氢氧化物（NiFe-LDH）和氧硫化钼Mo(OS)_x纳米片异质结构。NiFe LDH/Mo(OS)_x电极在1 M KOH溶液中表现出优异的OER性能和长效稳定性,在10 mA/cm²电流密度下过电势仅为220 mV。在100、500 mA/cm²的高电流密度下,也能达到253、304 mV的低过电势。研究结果表明,NiFe-LDH/Mo(OS)_x电极优异的OER性能归因于Mo(OS)_x和NiFe LDH的协同作用,极大地促进了Fe²⁺向Fe³⁺活性物质的转化,并促进了氧空位的形成。这种协同制备方法为合理构建和设计异质结构电催化剂,实现高效的水分解提供了帮助。     

CH2(X3B1)分子的结构与解析势能函数

 运用密度泛函理论(DFT)的B3LYP方法在6-311++G^**水平上,对基态CH₂分子的结构进行了优化计算,得到CH₂分子的稳定结构为C_2v构型,电子态为X³B₁,平衡核间距R_CH=0.1072nm、离解能D_e=8.034eV,用多体项展式理论推导了基态CH₂分子的解析势能函数,其等值势能图准确再现了基态CH₂分子的结构特征及其势阱深度与位置.     

三核铜配合物[Cu3(TBSSB)2(BSA)2(bipy)2]·H2O的合成、晶体结构及性质研究

以牛磺酸缩5-溴水杨醛席夫碱（TBSSB）、5-溴水杨醛（BSA）、2,2''-联吡啶（bipy）为混合配体,合成了三核铜配合物[Cu₃（TBSSB）₂（BSA）₂（bipy）₂]·H₂O （1）,并对该化合物进行了元素分析、红外光谱、X-射线单晶衍射、光致发光光谱、固体漫反射光谱及分子轨道分析等表征。晶体结构分析表明,该化合物结晶属三斜晶系,Pī空间群,晶胞参数为a=10.031（2）Å,b=11.480（2）Å,c=12.913（3）Å,α=73.13（3）°,β=78.58（3）°,γ=75.24（3）°,V=1363.6（5）ų,Z=1,M_r=1533.30,Dc=1.867 g/cm³,F（000）=759,μ=4.236 mm^-1,S=0.921,R₁=0.0488,wR₂=0.0471（I > 2σ（I））,R₁=0.1812,wR₂=0.0546。Cu （2）离子与来自于两个TBSSB配体的两个氮原子和两个氧原子配位,形成正方形配位构型。Cu （1）离子与来自于一个2,2''-bipy的两个氮原子,TBSSB配体的一个氧原子,以及BSA的两个氧原子配位,形成四方锥形配位构型。该化合物分子通过O-H…Br分子内氢键和C-H…O分子间氢键相互连接形成三维超分子结构。研究发现该化合物能够发出蓝色荧光,它的带隙为2.19 eV。     

磁控溅射表面镀膜对Nd2Fe14B稀土永磁体抗腐蚀性能的影响

在Nd₂Fe₁₄B稀土永磁体基体表面,采用磁控溅射（直流+射频）技术制备了Ti/Ni,Ti/Al和Al/Ni等二元合金薄膜和Ti/Al/Ni三元合金薄膜。并通过中性盐雾试验、腐蚀失重计算、电化学腐蚀试验、金相观察等方式,对比研究了不同表面处理对Nd₂Fe₁₄B稀土永磁体基体抗腐蚀性能的影响,并构建了腐蚀模型。研究发现：Ti/Ni,Ti/Al和Al/Ni等二元合金薄膜和Ti/Al/Ni三元合金薄膜均有效地提高了Nd₂Fe₁₄B稀土永磁体基体耐中性盐雾腐蚀和电化学腐蚀的能力;Ti/Al/Ni三元合金薄膜较Ti/Ni,Ti/Al和Al/Ni等二元合金薄膜有更优良的综合耐腐蚀性能,其磁控溅射工艺参数为：Ar流量60 sccm,基片温度常温,Ni,Al,Ti的溅射功率都为250 W,基片转速20 r·min^-1,镀膜均速0.3 nm·s^-1,总计溅射时间1 h。     

一种含5-硝基间苯二甲酸和菲咯啉配体的铜（II）配合物的制备、表征及电化学性能

采用水热法合成了含混合配体的铜配合物[CuLPhen]n（HL=5-硝基间苯二甲酸,Phen=1,10-菲咯啉）,其结构由单晶X射线晶体学确定。标题化合物在单斜空间群P2₁/c中结晶。标题化合物的晶体数据：C₂₀H₁₁N₃CuO₆,Mr=106.57,a =10.6619（3）,b =12.5760（4）,c =13.0550（3）Å,α =90,β=95.463（3）,γ =90°,V =1742.50（9）ų,Z =4,T=293（2）K,Dc =1.726 g/cm³,μ（MoKα）=0.301 mm^-1,F（000）=51.0,R =0.0380,wR =0.07,GOF =1.026。当用作超级电容器电极材料时,所制备的配合物具有高比电容、良好的循环稳定性和优良的倍率性能。具体来说,在1 mol/L KOH溶液中,最大比电容可达到225 F/g。在5 a/g电流密度下,5000次循环后比电容保持率为67.31%。     

N,N′-双水杨醛缩二氨基乙醚的合成和晶体结构

合成了一种新的西佛碱配体N,N''双水杨醛缩二氨基乙醚,并采用x射线单晶衍射法测定了它的晶体结构。该晶体属正交晶系空间群P_bcn,a=5.667(2)Å,b=9.192(3)Å,c=31.829(11)Å,v=1658.2(7)ų,分子式为C₁₈H₂₀N₂O₃,Mr=312.36,Z=4,D_C=1.251g·cm^-3,晶体结构测定和UV,IR谱均表明分子内形成氢键。在甲醇溶液中有一个荧光发射带,λ_max=443nm。     

CoFe2O4-Al2O3复合材料的制备及其在含日落黄废水处理中的应用

制备了铁酸钴-氧化铝（CoFe₂O₄-Al₂O₃）复合材料,并采用扫描电子显微镜（SEM）、X射线衍射（XRD）、比表面积和孔径分析仪对多孔CoFe₂O₄-Al₂O₃复合材料的物相和形貌进行了分析. 利用制备的CoFe₂O₄-Al₂O₃复合材料活化过硫酸氢钾（PMS）来降解废水溶液中的日落黄（SY）,通过研究CoFe₂O₄-Al₂O₃材料制备过程中Co²⁺,Fe³⁺和Al³⁺的物质的量之比、煅烧温度和时长对材料催化性能的影响,发现Co²⁺,Fe³⁺和Al³⁺的最佳物质的量之比为1:2:12,最佳煅烧温度为400 ℃和最佳煅烧时长为3 h. 对采用在最优条件下制得的CoFe₂O₄-Al₂O₃复合材料作为催化剂,PMS氧化降解含日落黄废水进行研究,考察了pH值、温度、不同体系、PMS用量、CoFe₂O₄-Al₂O₃材料用量和一些阴离子对日落黄降解的影响. 结果表明：在pH=7,温度为55 ℃条件下,用0.1 g催化剂和0.125 g PMS能使100 mL质量浓度为0.6 g·L^-1的日落黄溶液在30 min内降解率达到99.5%. 同时,碳酸氢根负离子（HCO₃^-）和硝酸根负离子（NO₃^-）的加入抑制了日落黄的降解,而Cl^-则能促进日落黄的降解. 此外,在进行4次循环使用后,CoFe₂O₄-Al₂O₃仍表现出很好的催化性能,日落黄去除效果仍能达到90%以上.     

铁镍磷化物电极材料的制备及电催化析氢性能

为了解决电解水析氢过程中所用贵金属材料的高昂成本问题,采用水热-低温磷化法制备了一种低廉、环保、高效的析氢催化剂Fe_xNi_1-x-P。与传统制备方法比较,该方法在水热合成前驱体过程中,利用镍盐和铁盐与无水乙醇发生氧化还原反应,生成的OH^-可以沉淀金属离子,随后前驱体与NaH₂PO₂低温磷化制得Fe_xNi_1-x-P。通过研究发现,Fe_0.5Ni_0.5-P电极材料表现出优异的催化活性。在1.0 mol·L^-1 KOH溶液中,电流密度为10 mA·cm^-2时,电极Fe_0.5Ni_0.5-P需要的过电位仅为113 mV,1 000圈循环伏安测试后,极化曲线无明显衰减。提供了一种制备Fe_xNi_1-x-P的简便方法,为开发清洁能源系统的环境友好型催化剂提供了新思路。     

Al2O3/WO3/ZrO2催化剂的制备及在酯交换反应中的研究

以松木为模板,采用模板法将不同含量的Al₂O₃添加到WO₃/ZrO₂复合氧化物中,采用X射线衍射、BET比表面积分析、拉曼光谱和NH₃等温吸附测试等手段对其进行表征,以评估其改进结果。将Al₂O₃/WO₃/ZrO₂催化剂应用到甲醇与乌桕油（非食用油）的酯交换反应中,在其他反应条件相同,Al₂O₃质量分数为3%时,生物柴油最高产率达到83.1%。结果表明：添加Al₂O₃稳定了ZrO₂的四方相结构,使得催化剂比表面积更大、孔数量增加;模板法制备的催化剂孔径分布均匀,WO₃呈高度分散无定型状态;引入Al₂O₃增加了WO₃/ZrO₂催化剂的中强酸性,对弱酸性和强酸性无明显改变。     

Properties of a new type Al/Pb-0.3%Ag alloy composite anode for zinc electrowinning

An Al/Pb-0.3%Ag alloy composite anode was produced via composite casting. Its electrocatalytic activity for the oxygen evolution reaction and corrosion resistance was evaluated by anodic polarization curves and accelerated corrosion test, respectively. The microscopic morphologies of the anode section and anodic oxidation layer during accelerated corrosion test were obtained by scanning electron microscopy. It is found that the composite anode (hard anodizing) displays a more compact interfacial combination and a better adhesive strength than plating tin. Compared with industrial Pb-0.3%Ag anodes, the oxygen evolution overpotentials of Al/Pb-0.3%Ag alloy (hard anodizing) and Al/Pb-0.3%Ag alloy (plating tin) at 500 A·m?2 were lower by 57 and 14 mV, respectively. Furthermore, the corrosion rates of Pb-0.3%Ag alloy, Al/Pb-0.3%Ag alloy (hard anodizing), and Al/Pb-0.3%Ag alloy (plating tin) were 13.977, 9.487, and 11.824 g·m?2·h?1, respectively, in accelerated corrosion test for 8 h at 2000 A·m?2. The anodic oxidation layer of Al/Pb-0.3%Ag alloy (hard anodizing) is more compact than Pb-0.3%Ag alloy and Al/Pb-0.3%Ag alloy (plating tin) after the test.     

Electroless copper-phosphorus coatings with the addition of silicon carbide (SiC) particles

Cu-P-silicon carbide (SiC) composite coatings were deposited by means of electroless plating. The effects of pH values, temperature, and different concentrations of sodium hypophosphite (NaH₂PO₂·H₂O), nickel sulfate (NiSO₄·6H₂O), sodium citrate (C₆H₅Na₃O₇·2H₂O) and SiC on the deposition rate and coating compositions were evaluated, and the bath formulation for Cu-P-SiC composite coatings was optimised. The coating compositions were determined using energy-dispersive X-ray analysis (EDX). The corresponding optimal operating parameters for depositing Cu-P-SiC are as follows: pH 9; temperature, 90℃; NaH₂PO₂·H₂O concentration, 125 g/L; NiSO₄·6H₂O concentration, 3.125 g/L; SiC concentration, 5 g/L; and C₆H₅Na₃O₇·2H₂O concentration, 50 g/L. The surface morphology of the coatings analysed by scanning electron microscopy (SEM) shows that Cu particles are uniformly distributed. The hardness and wear resistance of Cu-P composite coatings are improved with the addition of SiC particles and increase with the increase of SiC content.     

NiCo/纳米SiO2复合镀层的耐腐蚀及其摩擦学性能研究

采用电沉积法在铜基底上沉积了NiCo/纳米SiO2复合镀层和NiCo合金镀层,用扫描电子显微镜、CHI660A电化学工作站及UMT-2M摩擦磨损测试机考查了镀层的表面形貌、磨损形貌、耐腐蚀性能及摩擦学性能.结果表明,纳米SiO2颗粒的加入抑制了NiCo晶体的增长,使得镀层中NiCo颗粒明显得到细化,镀层更加均匀致密;在相同的腐蚀和摩擦条件下,纳米复合镀层的耐蚀性、耐磨性能明显高于NiCo合金镀层;随着镀液中纳米颗粒悬浮量的增加,复合镀层的摩擦系数先降低后增大,当镀液中SiO2纳米颗粒含量为5 g/L时复合镀层的摩擦系数最小.     

Degradation of the antibiotic sulfamonomethoxine sodium in aqueous solution by photo-Fenton oxidation

In this study, photo-Fenton oxidation was applied to degradation of sulfamonomethoxine sodium (SMMS) in aqueous solution. The operation parameters of pH, temperature, and concentrations of H2O2, Fe2+ and SMMS were investigated. The optimum conditions for the photo-Fenton process were determined as follows: [SMMS]=4.53 mg/L, pH 4.0, [H2O2]=0.49 mmol/L, [Fe2+]= 19.51 μmol/L and T=25°C. Under these conditions 98.5% of the SMMS degraded. The kinetics were also studied, and degradation of SMMS by the photo-Fenton process could be described by first-order kinetics. The apparent activation energy was calculated as 23.95 kJ/mol. Mineralization of the process was investigated by measuring the chemical oxygen demand (COD), and the COD decreased by 99% after 120 min. This process could be used as a pretreatment method for wastewater containing sulfamonomethoxine sodium.     

Ni-Fe-P/Al_2O_3复合电沉积工艺对Al_2O_3复合量的影响

研究了Ｎｉ－Ｆｅ－Ｐ／Ａｌ２Ｏ３复合电沉积的工艺参数对沉积层中Ａｌ２Ｏ３硬质微粒复合量的影响．结果表明，复合电沉积层中Ａｌ２Ｏ３微粒复合量随镀液中Ａｌ２Ｏ３含量、温度、阴极电流密度以及ＮａＨ２ＰＯ２含量的改变表现出不同的变化趋势．在实验工艺条件下，可获得Ａｌ２Ｏ３硬质微粒均匀弥散分布的复合电沉积层，其中Ａｌ２Ｏ３的最大复合量可达１３．４８％（体积）．     

不锈钢1Cr18Ni9Ti最佳镀液配方与施镀条件的优选

为获得外观光洁,镀层均匀且致密的不锈钢1Cr18Ni9Ti,本文通过正交试验在充分考虑镀液稳定性、镀速、镀层质量等因素后,择优筛选出1Cr18Ni9Ti镀液配方及施镀条件：硫酸镍（25g/L）,次亚磷酸钠（35g/L）,乙酸钠（20g/L）,柠檬酸（5g/L）,乳酸（10g/L）,硫脲（1mg/L）;温度为88℃,pH值4.8。经检测,镀液稳定性好;镀层外观光亮,厚度均匀、致密;施镀后试样耐蚀性明显优于不锈钢1Cr18Ni9Ti的耐蚀性。     

超声波搅拌时间对原位自生Mg2Si/Al基复合材料凝固组织和力学性能的影响

为了研究铝基复合材料的凝固组织和力学性能,采用超声波搅拌的方法制备了原位自生Mg₂Si/Al基复合材料.利用X射线衍射仪(XRD)、金相显微镜(OM)和扫描电子显微镜(SEM)分析其微观形貌,并通过硬度检测和拉伸试验测试其力学性能.结果表明:超声波搅拌不但能够细化初生Mg₂Si颗粒,改变凝固组织形貌,而且具有除气除杂功能,二者共同提高了Mg₂Si/Al基复合材料的力学性能;经过超声波搅拌的Mg₂Si/Al基复合材料与未经过超声波搅拌的Mg₂Si/Al基复合材料相比,抗拉强度与伸长率总体呈上升趋势,其断口形貌均为准解理面.在超声时间为40 s时,抗拉强度和伸长率达到最大值,分别为201 MPa和5.63%,相比未超声处理的Mg₂Si/Al基复合材料的抗拉强度和伸长率,分别增长了139.29%和178.71%;复合材料的硬度先升高后降低,超声作用时间为30 s时硬度最佳,为116.96(HB).     

Character and fabrication of Al/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/Al tunnel junctions for qubit application

The superconductive Josephson junction is the key device for superconducting quantum computation. We have fabricated Al/Al2O3/Al tunnel junctions using a double angle evaporation method based on a suspended shadow mask. The Al2O3 junction barrier has been formed by introducing pure oxygen into the chamber during the fabrication process. We have adjusted exposure conditions by changing either the oxygen pressure or the oxidizing time during the formation of tunnel barriers to control the critical current density Jc and the junction specific resistance Rc. Measurements of the leakage in Al/Al2O3/Al tunnel junctions show that the devices are suitable for qubit applications.     

ZrO_2-supported α-MnO_2:Improving low-temperature activity and stability for catalytic oxidation of methane

The single phaseα-Mn O_2and in-situ supportedα-Mn O_2/Zr O_2with different ratios of Mn/Zr were synthesized by one-pot hydrothermal method.They showed superior activity for catalytic oxidation of methane and even better than that of 1%Pt/Al_2O_3.The T_(50)of Mn O_2/Zr O_2catalysts with different ratios of Mn/Zr were located in the range of 315–335°C at a WHSV of 90 L g~(-1)h~(-1),whereas that of Pt/Al_2O_3was 380°C.After sulfur ageing,the Mn O_2/Zr O_2catalysts with Mn/Zr ratio of 2:1(2Mn O_2/1Zr O_2)and 1:1(1Mn O_2/1Zr O_2)exhibited satisfying sulfur resistance in comparison to the pure Mn O_2.The 2Mn O_2/1Zr O_2catalyst also showed acceptable catalytic stability,and the addition of 10 vol%CO_2had no obvious negative effect on its stability,whereas the addition of2.6 vol%H_2O caused slight but reversible decreasing methane oxidative activity.