Induced pluripotent stem cell (iPS) technology: promises and challenges

In 2006, an article published in Cell by Shinya Yamanaka took by surprise the stem cell research community. By performing systematic retroviral transduction of factors enriched in embryonic stem (ES) cells, the authors demonstrated the reprogramming of mouse fibroblasts into an ES cell-like state. These cells, baptized iPS (induced pluripotent stem) cells, were immediately recognized as a ground-breaking discovery. Subsequently, the same authors and other groups reported a similar achievement with human fibroblasts. Two years later, the number of top quality papers on iPS is astonishing, and interest in the scientific community has risen to a fever pitch. But although iPS has the potential to revolutionize Regenerative Medicine, important questions still remain unanswered. Work from multiple laboratories worldwide including ours is focused on deciphering the molecular mechanisms of iPS, and trying to improve the technique to make it suitable for the clinic. In this review article we briefly discuss the past, present and future of iPS, with emphasis on urgent issues to be solved. Supported by the National Nature Science Foundation of China (Grant Nos. 30725012, 30630039 and 90813033), Knowledge Innovation Project of Chinese Academy of Sciences (Grant No. KSCX2-YW-R-48), National Key Basic Research and Development Program of China (Grant Nos. 2006CB701504, 2006CB943600, 2007CB948002, 2007CB947804. 2007CB947900) and Guangzhou Science and Technology Development Funds (Grant No. 2008A1-E4011)     

Optical limiting of niobic tellurite glass induced by self-trapped exciton absorption of the AgCl nanocrystal dopant

Niobic tellurite glass doped by silver chloride nanocrystal was prepared with the melting-quenching and heat treatment method, and the self-trapped exciton absorption band of the silver chloride nanocrystal was observed at 532 nm in the UV-visible absorption spectrum. The glass structure characteristics were investigated by Raman spectroscopy, and the mechanism of self-trapped exciton was analyzed by Jahn-Teller model. Its optical limiting was measured with 532 nm picosecond laser pulses, and the corresponding nonlinear absorption coefficient was measured with open-aperture Z-scan. The experimental results showed that optical limiting at 532 nm was attributed to free carrier absorption between the self-trapped state and the continuum band. Supported by Shanghai Leading Academic Discipline Project (Grant No. B408), National Basic Research Program of China (Grant Nos. 2006CB806006, 2006CB921105), Program for Changjiang Scholars and Innovative Research Team in University, Doctoral Program of High Education (Grant No. 20050269011) and Project sponsored by Shanghai Science and Technology Committee (Grant Nos. 06DJ14008, 07dz22025, 06QH14003)     

Application of atomic force microscopy to living samples from cells to fresh tissues

Atomic force microscopy is a novel method for imaging and characterization in biomedicine. However, high-resolution imaging of living samples from cells to tissues still remains a challenge. In this paper, two types of AFM working mode （contact mode and tapping mode） which are utilized for the imaging of living cells and tissues are discussed. A new magnetic tapping mode （MAC mode）, which is more suitable for living samples, and a novel data collecting system named TREC, are also introduced.     

mRNA detection in living cell using phosphorothioate-modified molecular beacon

In this study, GFP mRNA in COS-7 cell and GFP-transfected COS-7 cell was detected in real time using phosphorothioate-modified molecular beacon based on living cell imaging method. Results showed that phosphorothioate-modified molecular beacon still kept the advantages of molecular beacon, such as, excellent selectivity, high sensitivity, and no separation detection. In addition, this modification could significantly increase the nuclease resistance of molecular beacon. Phosphorothioate-modified molecular beacon can efficiently reduce the false positive signal and improve the accuracy of living cell mRNA detection. Supported by the National Key Basic Research Program (Grant No. 2002CB513110), International Technologies Collaboration Program of China (Grant No. 2003DF000039), and National Natural Science Foundation of China (Grant Nos. 90606003 and 20620120107)     

Facile synthesis of gold nanoribbons by L-cysteine at room temperature

Highly crystalline gold nanoribbons have been synthesized via a simple method by L-cysteine reduction of aqueous chloroaurate ions at room temperature, without additional capping agent or surfactant. Based on transmission electron microscopy (TEM) and UV-vis absorption studies for the intermediate products, the formation of gold nanoribbons is regarded as a kind of oriented attachment growth. Supported by the National Natural Science Foundation of China (Grant Nos. 90406023 and 90406024), National Important Basic Research Program of China (Great Nos. 2006CB933206 and 2006CB705606) and Foundation for Top Doctoral Candidate of Southeast University.     

Decoration of C60 nanorods with nickel and their magnetic properties

We studied the coating of C60 nanorods with nickel by electroless plating method and investigated their magnetic properties. The morphology and structure of the nickel layer coated on C60 nanorods were characterized by transmission electron microscopy （TEM）, energy-dispersive X-ray spectroscopy （EDX）, X-ray diffraction （XRD） and Raman spectroscopy. The coated nickel is in the form of nano-sized crystals and becomes a continuous layer as reaction time increases. The hysteresis loop shows a super paramagnetic characteristic similar to that of nanometer-sized nickel particle. These results suggest that the average size of nickel particles on C60 rods is below 10 nm. Our study has shown that electroless plating is an efficient and simple method for coating C60 nanorods with nickel.     

The program structure designing and optimizing tests of GRAPES physics

According to the modularization and standardization of program structure in Global/Regional Assimilation and Prediction System （GRAPES）, the plug-compatible and transplantable regional meso-scale and global middle-range physics software package is established. The package＇s component integrality is comparative with the other advanced models physics. A three-level structure of connecting GRAPES physics and dynamic frame has been constructed. The friendly interface is designed for users to plug in their own physics packages. Phenomenon of grid-point storm rainfall in numerical prediction is analyzed with the numerical tests. The scheme of air vertical velocity calculation is improved. Opti- mizing tests of physics schemes are performed with the correlative parameters adjusting. The results show that the false grid-point storm rainfall is removed by precipitation scheme improving. Then the score of precipitation forecast is enhanced.     

IL-8-induced L-selectin shedding regulates its binding kinetics to PSGL-1

L-selectin plays a crucial role in inflammation cascade by initiating the tethering and rolling of leukocytes on endothelium wall. While many L-selectin molecules are rapidly shed from the cell surface upon activation, the remaining membrane-anchored L-selectin may still play an important role in regulating leukocyte rolling and adhesion with different binding kinetics. Here we developed an in vitro model to activate Jurkat cells via interlukin-8 （IL-8） and quantified the two-dimensional （2D） binding kinetics, using a micropipette aspiration assay, of membrane-anchored L-selectin to P-selectin glycoprotein ligand 1 （PSGL-1） ligand coupled onto human red blood cells （RBCs）. The data indicated that L-selectin shedding reduced the amount of membrane-anchored L-selectin and lowered both its reverse and forward rates. These results suggested that the rolling dynamics of activated leukocytes was determined by two opposite impacts： reducing the surface presentation would enhance the rolling but lowering the kinetic rates would decrease the rolling. This finding provides a new insight into understanding how L-selectin shedding regulates leukocyte rolling and adhesion.     

Photo-driven molecular switch based on the photochroism and solvatochromism of diarylethene dialdehyde

The two distinct characters of diarylethene dialdehyde derivative-photochromism and solvatochromism are displayed in particular circumstances. The fluorescence of phosphorus （Ⅲ） tetrabenzotriazacorrole can be reversibly regulated by the three kinds of status of the diarylethene dialdehyde, colorless ring-opened form, red ring-closed form, and blue ring-closed form, which is gated by visible light, ultraviolet light and ethanol individually or jointly. Based on this effect, a novel molecular INH logic switch is proposed.     

High pressure effects on the crystal structure and electric conductivity of perovskite like（Ca/Sr）2CuO2Cl2 compounds

The crystal structure stability as well as electric conductance of （Sr/Ca）2CuO2Cl2 compound with K2NiF4 structure was investigated up to 31 GPa using diamond anvil technique. It seems that （Sr/Ca）2CuO2Cl2 is quite stable under pressure but with obvious anisotropic compressibility. The equation of state （EOS） obtained shows relative large bulk modulus.     

Stamen specification and anther development in rice

Male reproductive development is a complex biological process which includes the formation of the stamen with differentiated anther tissues, in which microspores/pollens are generated, then anther dehiscence and subsequently pollination. Stamen specification and anther development involve a number of extraordinary events such as meristem transition, cell division and differentiation, cell to cell communication, etc., which need the cooperative interaction of sporophytic and gametophytic genes. The advent of various tools for rice functional gene identification, such as complete genome sequence, genome-wide microarrays, collections of mutants, has greatly facilitated our understanding of mechanisms of rice stamen specification and anther development. Male sterile lines are critical for hybrid rice breeding, therefore understanding these processes will not only contribute greatly to the basic knowledge of crop developmental biology, but also to the development of new varieties for hybrid rice breeding in the future.     

Detection of infrared photons with a superconductor

A superconductor single photon detector based on NbN nanowire was fabricated using electron beam lithography （EBL） and reactive ion etching （RIE） for infrared photon detection. When biased well below its critical current at 4.2 K, NbN nanowire is very sensitive to the incident photons. Typical telecommunication photons with a wavelength of 1550 nm were detected by this detector. Data analysis indicates the repeating rate of the device with 200 nm NbN nanowire may be up to 100 MHz, and the quantum efficiency is about 0,01% when biased at 0.95/c.     

Applications of radiotracer techniques for the pharmacology and toxicology studies of nanomaterials

With the rapid development of nanosciences and nanotechnology, a wide variety of manufactured nanomaterials are now used in commodities, pharmaceutics, cosmetics, biomedical products, and industries. While nanomaterials possess more novel and unique physicochemical properties than bulk materials, they also have an unpredictable impact on human health. In the pharmacology and toxicology studies of nanomaterials, it is essential to know the basic behavior in vivo, i.e. absorption, distribution, metabolism, and excretion (ADME) of these newly designed materials. Radiotracer techniques are especially well suited to such studies and have got the chance to demonstrate their enchantment. In this paper, radiolabeling methods for carbon nanomaterials, metallic and metal oxide nanoparticles, etc. are summarized and the applications of the radiolabeled nanomaterials in pharmacology and toxicology studies are outlined. Supported by the National Basic Research and Development Program of China (Grant Nos. 2006CB705605 and 2006CB932505), Chinese Academy of Sciences (Grant No. KJCX3.SYW.N3), and National Natural Science Foundation of China (Grant Nos. 10525524, 10505024 and 20707027)     

Structure modeling and spatial epitope analysis for HA protein of the novel H1N1 influenza virus

In recent months, a novel influenza virus H1N1 broke out around the world. With bioinformatics technology, the 3D structure of HA protein was obtained, and the epitope residues were predicted with the method developed in our group for this novel flu virus. 58 amino acids were identified as potential epitope residues, the majority of which clustered at the surface of the globular head of HA protein. Although it is located at the similar position, the epitope of HA protein for the novel H1N1 flu virus has obvious differences in the electrostatic potential compared to that of HA proteins from previous flu viruses.     

Crystal structures of catalytic and regulatory subunits of rat protein kinase CK2

Protein kinase CK2 consists of two catalytic subunits (CK2α) and two regulatory subunits (CK2β). Here, we report the crystal structures of rat CK2α mutant (rCK2α-△C, 1—335) and CK2β (rCK2β). The overall topology of rCK2α-△C and rCK2β are very similar to the human enzyme, although large structural differences could be observed in the N-terminal domain of rCK2α-△C. Our reported structure of rCK2α-△C is in the close conformation state while the counterpart hCK2α is in the open conformation state, indi- cating ...     

Superconductivity in Ba1−xSmxFFeAs and Eu1−xSmxFFeAs systems

We synthesized the samples Ba1-xSmxFFeAs and Eu1-xSmxFFeAs with ZrCuSiAs-type structure. These samples were characterized by resistivity and susceptibility. It is found that the substitution of rare earth metal for alkaline earth metal in the two systems suppresses the anomaly in resistivity and induces superconductivity. Superconductivity at 54 K in nominal composition Ba0.5Sm0.5FFeAs and at 51 K for Eu0.5Sm0.5FFeAs is realized, indicating that the superconducting transition temperatures in the iron arsenide fluorides is the same as that in oxypnictides with the same structure.     

C-H···Pd(II) interaction-driven homochiral M helix formation of neutral (R,R)-bis(pyrrol-2-ylmethyl- eneamino) cyclohexane palladium(II) complex

A chiral complex of (R,R)-Pd was prepared by reaction of optically pure (R,R)-bis(pyrrol-2-ylmethyl-eneamino) cyclohexane ligand with Pd(OAc)2·2H2O under the base condition at room temperature. The weak intermolecular C-H···Pd interaction was found to be responsible for the homochiral M helix for-mation of the neutral,chiral,mononuclear (R,R)-Pd in the crystal packing.     

Multistage evolution of continental collision orogen: A case study for western Dabie orogen

The foramtion and evolution of collisional orogen is a prominent feature along convergent plate margins, and is generally a complex process. This article presents an integrated study of zircon genesis, U-Pb age and Lu-Hf isotope composition as well as geological characteristics for the western Dabie orogen to constrain its multi-stage evolution history. The results suggest that the formation of oceanic crust in the Huwan area was constrained at ca. 400--430 Ma, which was slightly later than the collision of the northern Qinling with the North China Block. It formed in a marginal basin in the northern margin of the Yangtze Block. The peak metamorphism of eclogite in the Huwan area occurred at ca. 310 Ma, and the timing of the initial exhumation of oceanic eclogite was about 270 Ma. The high to ultrahigh pressure （HP-UHP） metamorphic rocks in the Xinxian and the Hong＇an metamorphic zones have the same ages and natures as those of the HP-UHP metamorphic rocks in the other Dabie-Sulu terrains, and also have experienced multi-stage exhumation, and thus can be taken as a coherent part of the Dabie-Sulu orogen. Therefore, the Qinling-Dabie-Sulu orogen is a typical multi-stage continental collision orogen, with an amalgamation process extending more than 200 Ma.     

Preparation of polypropylene/montmorillonite nanocomposites by intercalative polymerization： Effect of in situ polymer matrix functionalization on the stability of the nanocomposite structure

The copolymerization of propylene and 5-hexenyl-9-borabicyclo[3.3.1]nonane (5-hexenyl-9-BBN) has been conducted with an MgCl2/TiCl4 catalyst intercalated in an organically modified montmorillonite (OMMT) with triethylaluminum (AlEt3) cocatalyst and diphenyldimethoxysilane (DDS) external donor. This polymerization process simultaneously results in both the exfoliation of MMT layers to realize the preparation of polypropylene (PP)/MMT nanocomposites and the implantation of reactive borane groups in the formed PP matrix. The polymer-borne borane groups have been able to undergo an effi-cient hydrolysis process under very mild reaction conditions (40℃, 3 h, in THF), introducing hydroxy groups into PP without sacrificing the polymerization-formed nanocomposite structure (the exfoliation of MMT). The resultant hydroxyl-functionalized PP/MMT nanocomposites exhibit enhanced structural stability against processing compared with those based on unfunctionalized PP matrix.