Rejuvenation of the lithosphere by the Hawaiian plume

The volcanism responsible for creating the chain of the Hawaiian islands and seamounts is believed to mark the passage of the oceanic lithosphere over a mantle plume. In this picture hot material rises from great depth within a fixed narrow conduit to the surface, penetrating the moving lithosphere. Although a number of models describe possible plume-lithosphere interactions, seismic imaging techniques have not had sufficient resolution to distinguish between them. Here we apply the S-wave 'receiver function' technique to data of three permanent seismic broadband stations on the Hawaiian islands, to map the thickness of the underlying lithosphere. We find that under Big Island the lithosphere is 100-110 km thick, as expected for an oceanic plate 90-100 million years old that is not modified by a plume. But the lithosphere thins gradually along the island chain to about 50-60 km below Kauai. The width of the thinning is about 300 km. In this zone, well within the larger-scale topographic swell, we infer that the rejuvenation model (where the plume thins the lithosphere) is operative; however, the larger-scale topographic swell is probably supported dynamically.     

东海一菲律宾海剖面岩石层有效弹性厚度计算及分析

采用均衡响应函数法分段计算了自东海至东马里亚纳海盆的剖面岩石层有效弹性厚度,并利用海沟洋侧海底地形按端载加压弹性板弯曲模式对琉球海沟和马里亚纳海沟洋侧块体的弹性厚度进行了计算和对比,结合测线经过地区的地震地壳测深结果等地质、地球物理研究成果对分段计算结果进行了分析.结果表明,由均衡响应函数计算曲线多个区段可估计出2个弹性厚度值.取值大的弹性厚度,在不同区段其数值较为接近,为20~25 km,这种共性是现在热状态下海洋岩石层区域弹性特征的反映,值小的弹性厚度则是各区段内不同地质作用效果的个性反映.     

Global anisotropy and the thickness of continents

For decades there has been a vigorous debate about the depth extent of continental roots. The analysis of heat-flow, mantle-xenolith and electrical-conductivity data all indicate that the coherent, conductive part of continental roots (the 'tectosphere') is at most 200-250 km thick. Some global seismic tomographic models agree with this estimate, but others suggest that a much thicker zone of high velocities lies beneath continental shields, reaching a depth of at least 400 km. Here we show that this disagreement can be reconciled by taking into account seismic anisotropy. We show that significant radial anisotropy, with horizontally polarized shear waves travelling faster than those that are vertically polarized, is present under most cratons in the depth range 250-400 km--similar to that found under ocean basins at shallower depths of 80-250 km. We propose that, in both cases, the anisotropy is related to shear in a low-viscosity asthenospheric channel, located at different depths under continents and oceans. The seismically defined 'tectosphere' is then at most 200-250 km thick under old continents. The 'Lehmann discontinuity', observed mostly under continents at about 200-250 km, and the 'Gutenberg discontinuity', observed under oceans at depths of about 60-80 km, may both be associated with the bottom of the lithosphere, marking a transition to flow-induced asthenospheric anisotropy.     

Hafnium isotope evidence for a transition in the dynamics of continental growth 3.2 Gyr ago

Earth's lithosphere probably experienced an evolution towards the modern plate tectonic regime, owing to secular changes in mantle temperature. Radiogenic isotope variations are interpreted as evidence for the declining rates of continental crustal growth over time, with some estimates suggesting that over 70% of the present continental crustal reservoir was extracted by the end of the Archaean eon. Patterns of crustal growth and reworking in rocks younger than three billion years (Gyr) are thought to reflect the assembly and break-up of supercontinents by Wilson cycle processes and mark an important change in lithosphere dynamics. In southern West Greenland numerous studies have, however, argued for subduction settings and crust growth by arc accretion back to 3.8 Gyr ago, suggesting that modern-day tectonic regimes operated during the formation of the earliest crustal rock record. Here we report in situ uranium-lead, hafnium and oxygen isotope data from zircons of basement rocks in southern West Greenland across the critical time period during which modern-like tectonic regimes could have initiated. Our data show pronounced differences in the hafnium isotope-time patterns across this interval, requiring changes in the characteristics of the magmatic protolith. The observations suggest that 3.9-3.5-Gyr-old rocks differentiated from a >3.9-Gyr-old source reservoir with a chondritic to slightly depleted hafnium isotope composition. In contrast, rocks formed after 3.2 Gyr ago register the first additions of juvenile depleted material (that is, new mantle-derived crust) since 3.9 Gyr ago, and are characterized by striking shifts in hafnium isotope ratios similar to those shown by Phanerozoic subduction-related orogens. These data suggest a transitional period 3.5-3.2 Gyr ago from an ancient (3.9-3.5 Gyr old) crustal evolutionary regime unlike that of modern plate tectonics to a geodynamic setting after 3.2 Gyr ago that involved juvenile crust generation by plate tectonic processes.     

Extreme crustal oxygen isotope signatures preserved in coesite in diamond

The anomalously high and low oxygen isotope values observed in eclogite xenoliths from the upper mantle beneath cratons have been interpreted as indicating that the parent rock of the eclogites experienced alteration on the ancient sea floor. Recognition of this genetic lineage has provided the foundation for a model of the evolution of the continents whereby imbricated slabs of oceanic lithosphere underpin and promote stabilization of early cratons. Early crustal growth is thought to have been enhanced by the addition of slab-derived magmas, leaving an eclogite residuum in the upper mantle beneath the cratons. But the oxygen isotope anomalies observed in eclogite xenoliths are small relative to those in altered ocean-floor basalt and intermediate-stage subduction-zone eclogites, and this has hindered acceptance of the hypothesis that the eclogite xenoliths represent subducted and metamorphosed ocean-floor basalts. We present here the oxygen isotope composition of eclogitic mineral inclusions, analysed in situ in diamonds using an ion microprobe/secondary ion mass spectrometer. The oxygen isotope values of coesite (a polymorph of SiO2) inclusions are substantially higher than previously reported for xenoliths from the subcratonic mantle, but are typical of subduction-zone meta-basalts, and accordingly provide strong support for the link between altered ocean-floor basalts and mantle eclogite xenoliths.     

Study on crustal, lithospheric and asthenospheric thickness beneath the Qinghai-Tibet Plateau and its adjacent areas

Based on the results of pure dispersions of Rayleigh wave tomography in the Qinghai-Tlbet Plateau and its adjacent areas, tsklng S wave velocities from previous linear inversion as the initial model, using the simulated annealing algorithm, a nonlinear simultaneous inversion has been carried out for S wave velocity and thickness of different layers, including the crust, the lithosphere and the asthenosphere. The results indicate： The crustal thickness shows strong correlation with geology structures sketched by the sutures and major faults. The crust is very thick in the Qinghal-Tibet Plateau, varying from 60 km to 80 kin. The Ilthospherlc thickness in the Qinghai-Tibet Plateau Is thinner （130-160 kin） than Its adjacent areas. And two blocks can be recognized, divided by an NNE strike boundary running between 90°E-92°E inside the plateau. Its asthenosphere is relatively thick, varies from 150 km to 230 kin, and the thickest area is located in the western Qiangtsng. India has a thinner crust （32-38 kin）, a thicker lithosphere of 190 km and a rather thin asthenosphere of only 60 kin. Sichuan and Tarlm basins have the crust thickness less than 50 kin. Their Iithospheres are thicker than the Qinghai-Tibet Plateau, and their asthenospheres are thinner. A discussion has been made on the character and formation mechanism of the typical crust-mantle transition zone in the western Qiangtsng block.     

Deep origin and hot melting of an Archaean orogenic peridotite massif in Norway

The buoyancy and strength of sub-continental lithospheric mantle is thought to protect the oldest continental crust (cratons) from destruction by plate tectonic processes. The exact origin of the lithosphere below cratons is controversial, but seems clearly to be a residue remaining after the extraction of large amounts of melt. Models to explain highly melt-depleted but garnet-bearing rock compositions require multi-stage processes with garnet and clinopyroxene possibly of secondary origin. Here we report on orogenic peridotites (fragments of cratonic mantle incorporated into the crust during continent-continent plate collision) from Otr?y, western Norway. We show that the peridotites underwent extensive melting during upwelling from depths of 350 kilometres or more, forming a garnet-bearing cratonic root in a single melting event. These peridotites appear to be the residue after Archaean aluminium depleted komatiite magmatism.     

Anisotropy of thermal diffusivity in the upper mantle.

Heat transfer in the mantle is a key process controlling the Earth's dynamics. Upper-mantle mineral phases, especially olivine, have been shown to display highly anisotropic thermal diffusivity at ambient conditions, and seismic anisotropy data show that preferred orientations of olivine induced by deformation are coherent at large scales (>50 km) in the upper mantle. Thus heat transport in the upper mantle should be anisotropic. But the thermal anisotropy of mantle minerals at high temperature and its relationship with deformation have not been well constrained. Here we present petrophysical modelling and laboratory measurements of thermal diffusivity in deformed mantle rocks between temperatures of 290 and 1,250 K that demonstrate that deformation may induce a significant anisotropy of thermal diffusivity in the uppermost mantle. We found that heat transport parallel to the flow direction is up to 30 per cent faster than that normal to the flow plane. Such a strain-induced thermal anisotropy implies that the upper-mantle temperature distribution, rheology and, consequently, its dynamics, will depend on deformation history. In oceans, resistive drag flow would result in lower vertical diffusivities in both the lithosphere and asthenosphere and hence in less effective heat transfer from the convective mantle. In continents, olivine orientations frozen in the lithosphere may induce anisotropic heating above mantle plumes, favouring the reactivation of pre-existing structures.     

Continuing Colorado plateau uplift by delamination-style convective lithospheric downwelling

The Colorado plateau is a large, tectonically intact, physiographic province in the southwestern North American Cordillera that stands at ～1,800-2,000?m elevation and has long been thought to be in isostatic equilibrium. The origin of these high elevations is unclear because unlike the surrounding provinces, which have undergone significant Cretaceous-Palaeogene compressional deformation followed by Neogene extensional deformation, the Colorado plateau is largely internally undeformed. Here we combine new seismic tomography and receiver function images to resolve a vertical high-seismic-velocity anomaly beneath the west-central plateau that extends more than 200?km in depth. The upper surface of this anomaly is seismically defined by a dipping interface extending from the lower crust to depths of 70-90?km. The base of the continental crust above the anomaly has a similar shape, with an elevated Moho. We interpret these seismic structures as a continuing regional, delamination-style foundering of lower crust and continental lithosphere. This implies that Pliocene (2.6-5.3?Myr ago) uplift of the plateau and the magmatism on its margins are intimately tied to continuing deep lithospheric processes. Petrologic and geochemical observations indicate that late Cretaceous-Palaeogene (～90-40?Myr ago) low-angle subduction hydrated and probably weakened much of the Proterozoic tectospheric mantle beneath the Colorado plateau. We suggest that mid-Cenozoic (～35-25?Myr ago) to Recent magmatic infiltration subsequently imparted negative compositional buoyancy to the base and sides of the Colorado plateau upper mantle, triggering downwelling. The patterns of magmatic activity suggest that previous such events have progressively removed the Colorado plateau lithosphere inward from its margins, and have driven uplift. Using Grand Canyon incision rates and Pliocene basaltic volcanism patterns, we suggest that this particular event has been active over the past ～6?Myr.     

How thick is the lithosphere?

A rapid decrease in shear velocity in the suboceanic mantle is used to infer the thickness of the lithosphere. It is proposed that new and highly precise group velocity data constrain the solutions and imply a thickness near 70 km.     

Hot deformation behavior of a Cr-containing low carbon steel in the ferrite range

A low carbon steel with Cr addition of 0.46wt% combined with trace elements of Mn and Ti was studied. The apparent activation energy of deformation and the hot deformation equation of the steel in the ferritic range were determined by means of single hot compression tests. The hot-rolled strip of 3 mm in thickness rolled in the ferritic range was obtained using a laboratory hot rolling mill. The mechanical properties show that the values of yield strength and ultimate tensile strength are 230 and 330 MPa, respectively, and the elongation is 33%. The average r-value is 1.1. Large polygonal ferrite recrystallization grains with about 40 grn in size and the strong { 111 } recrystallization texture can be obtained in the hot-rolled strip.     

华南块体各向异性分区及上地幔动力学含义

利用SKS波分裂方法,对布设在华南地区的宽频带流动地震观测台阵数据进行分析。研究结果表明,华南块体(SCB)的SKS波分裂自西向东存在明显的变化。在华南块体西部克拉通岩石圈保留完整的四川盆地区域,SKS波分裂不明显,反映该区域岩石圈厚且缺乏大规模的一致性变形;在四川盆地东缘褶皱带区域,SKS波分裂快波方向主要为NNE向,分裂延迟时间可以达到1s左右,记录了该区域岩石圈地幔经历的一致的显著变形;华南块体东部的SKS波分裂快波方向主要为ENE向,分裂延迟时间为1s左右,该区域各向异性主要来自软流圈流动的贡献,与大地幔楔的流动方向契合;四川盆地东缘以东200km范围内,各向异性结果大部分显示为Null值,显示该区域在地质历史上可能发生过复杂的地球动力学过程。     

混凝土和钢管的力学性能和变形特点研究

对强度分别为54 MPa、83 MPa、116 MPa的混凝土和壁厚分别为1．0 mm、2．0 mm、4．7 mm的钢管力学性能和变形特点进行了研究。结果表明:混凝土强度越高,应力-应变关系线性段比例越高,横向变形越小,说明越接近均质材料。在受压条件下壁厚4．7 mm的钢管屈服后,荷载仍缓慢上升;壁厚2．0 mm钢管,达极限荷载后缓慢卸载,而壁厚1．0 mm的钢管在弹性阶段达极限荷载后突然卸载,表现为弹性失稳破坏。用澳大利亚标准AS4100-1900计算薄壁钢管的强度最为准确。     

Old EMI-type enriched mantle under the middle North China Craton as indicated by Sr and Nd isotopes of mantle xenoliths from Yangyuan, Hebei Province

Recent studies indicate that the Mesozoic litho- spheric thinning in North China was diachronous with that in west to the Taihangshan gravity lineament being later than in the eastern part of the North China Cra- ton[1―3]. During the Cenozoic, lithospher…     

Lithospheric thermal-rheological structures of the continental margin in the northern South China Sea

Thermal structures of three deep seismic profiles in the continental margin in the northern South China Sea are calculated, their "thermal" lithospheric thicknesses are evaluated based on the basalt dry solidus, and their rheological structures are evaluated with linear frictional failure criterion and power-law creep equation. "Thermal" lithosphere is about 90 km in thickness in shelf area, and thins toward the slope, lowers to 60-65 km in the lower slope, ocean crust and Xisha Trough. In the mid-west of the studied area, the lithospheric rheological structure in shelf area and Xisha Islands is of four layers: brittle, ductile, brittle and ductile. Because of uprising of heat mantle and thinning of crust and lithosphere in Xisha Trough, the bottom of the upper brittle layer is only buried at 16 km. In the eastern area, the bottom of the upper brittle layer in the north is buried at 20 km or so, while in lower slope and ocean crust, the rheological structure is of two layers of brittle and ductile, and crust and uppermost mantle form one whole brittle layer whose bottom is buried at 30-32 km. Analyses show that the characteristics of rheological structure accord with the seismic result observed. The character of rheological stratification implies that before the extension of the continent margin, there likely was a ductile layer in mid-lower crust. The influence of the existence of ductile layer to the evolution of the continent margin and the different extensions of ductile layer and brittle layer should not be overlooked. Its thickness, depth and extent in influencing continent margin's extension and evolution should be well evaluated in building a dynamic model for the area.     

高压下铌的强度和状态方程研究

室温下,以氦为传压介质的准静水压环境中加压到41GPa,在两柱全景金刚石对顶砧中加压到70GPa,研究了铌在高压下的强度和状态方程.准静水压下,X射线衍射数据拟合得到的体弹模量和其一阶导数分别为166(2)GPa和3.2(2).铌的差应力与剪切模量的比值(t/G)在超过6GPa后几乎为常数,表明由于塑性形变而发生屈服.结合高压下的剪切模量,发现铌在6GPa时由于塑性形变而发生宏观屈服时受到的差应力约为1.26GPa.差应力从2到6GPa可以表示为t=-0.557(94)+0.306(21)p,其中p是压力,单位是GPa.差应力在30GPa后再次增大,表明铌开始出现强化现象,此时对应的差应力约为1.67GPa.在70GPa时,铌受到的差应力最大,且约为3.96GPa.     

Continental collision slowing due to viscous mantle lithosphere rather than topography

Because the inertia of tectonic plates is negligible, plate velocities result from the balance of forces acting at plate margins and along their base. Observations of past plate motion derived from marine magnetic anomalies provide evidence of how continental deformation may contribute to plate driving forces. A decrease in convergence rate at the inception of continental collision is expected because of the greater buoyancy of continental than oceanic lithosphere, but post-collisional rates are less well understood. Slowing of convergence has generally been attributed to the development of high topography that further resists convergent motion; however, the role of deforming continental mantle lithosphere on plate motions has not previously been considered. Here I show that the rate of India's penetration into Eurasia has decreased exponentially since their collision. The exponential decrease in convergence rate suggests that contractional strain across Tibet has been constant throughout the collision at a rate of 7.03?×?10(-16)?s(-1), which matches the current rate. A constant bulk strain rate of the orogen suggests that convergent motion is resisted by constant average stress (constant force) applied to a relatively uniform layer or interface at depth. This finding follows new evidence that the mantle lithosphere beneath Tibet is intact, which supports the interpretation that the long-term strain history of Tibet reflects deformation of the mantle lithosphere. Under conditions of constant stress and strength, the deforming continental lithosphere creates a type of viscous resistance that affects plate motion irrespective of how topography evolved.     

The rapid drift of the Indian tectonic plate

The breakup of the supercontinent Gondwanaland into Africa, Antarctica, Australia and India about 140 million years ago, and consequently the opening of the Indian Ocean, is thought to have been caused by heating of the lithosphere from below by a large plume whose relicts are now the Marion, Kerguelen and Réunion plumes. Plate reconstructions based on palaeomagnetic data suggest that the Indian plate attained a very high speed (18-20 cm yr(-1) during the late Cretaceous period) subsequent to its breakup from Gondwanaland, and then slowed to approximately 5 cm yr(-1) after the continental collision with Asia approximately 50 Myr ago. The Australian and African plates moved comparatively less distance and at much lower speeds of 2-4 cm yr(-1) (refs 3-5). Antarctica remained almost stationary. This mobility makes India unique among the fragments of Gondwanaland. Here we propose that when the fragments of Gondwanaland were separated by the plume, the penetration of their lithospheric roots into the asthenosphere were important in determining their speed. We estimated the thickness of the lithospheric plates of the different fragments of Gondwanaland around the Indian Ocean by using the shear-wave receiver function technique. We found that the fragment of Gondwanaland with clearly the thinnest lithosphere is India. The lithospheric roots in South Africa, Australia and Antarctica are between 180 and 300 km deep, whereas the Indian lithosphere extends only about 100 km deep. We infer that the plume that partitioned Gondwanaland may have also melted the lower half of the Indian lithosphere, thus permitting faster motion due to ridge push or slab pull.     

某轻型载货车传动轴性能分析与优化

为了校核某轻型载货车传动轴的性能是否满足要求,基于有限元方法对其进行静强度分析,结果表明,低于其材料屈服强度,能满足强度要求。刚度分析结果表明,其刚度值高于试验要求值;对比分析结果表明随着轴管半径和厚度的增大,其扭转刚度也随之增大。扭转刚度实验表明,其仿真值与实验值基本一致。采用集成平台对轴管直径和厚度进行优化,优化之后其重量减轻5.8%。优化方案成功通过了整车道路耐久试验,因此分析与优化方法具有较高的可靠度和准确性。     

Hf isotopes of zircon megacrysts from the Cenozoic basalts in eastern China

Cenozoic basalts are widely distributed in eastern China, and some of them contain zircon megacrysts which are considered to be constituent mineral of the subcontinental lithospheric mantle （SCLM） and petrogenetically related to mantle metasomatism induced by addition of crustal materials. Using the Laser Ablation Multiple Collector Inductively Coupled Plasma Mass Spectrometry （LA-MC-ICPMS）, zircon megacrysts from the Cenozoic basalts at Changle in Shandong, Mingxi in Fujian, and Penglai in Hainan provinces have been used for Hf isotopic analyses. The data indicate that there is no significant deviation for the different zircon grains in each locale, except those from Penglai. The obtained ^176Hf /^177Hf ratios are 0.28302- 0.28308 for Changle, 0.28297-0.28300 for Mingxi, and 0.28288-0.28293 for Penglai, with corresponding ear values of 8.7-10.8, 7.0-7.9, and 3.9-5.7, respectively. These data display that there existed some regional heterogeneity, but the Hf model ages clustere in the Phanerozoic. Therefore, it is inferred that metasomatism of the lithospheric mantle beneath eastern China took place in the Phanerozoic, most probably in the Mesozoic-Cenozoic. However, the formation time of the iithospheric mantle is not clearly constrained based on the present Hf isotopic data.