| 用聚焦离子束气体辅助刻蚀在 LiNbO3上制备亚微米圆孔点阵 |
| |
| 引用本文： | 徐雪峰,颜莎,王克明,王雪林,薛建明,王宇钢. 用聚焦离子束气体辅助刻蚀在 LiNbO3上制备亚微米圆孔点阵[J]. 北京大学学报(自然科学版), 2009, 45(6): 937-940 |
| |
| 作者姓名： | 徐雪峰 颜莎 王克明 王雪林 薛建明 王宇钢 |
| |
| 作者单位： | 1. 北京大学重离子物理研究所, 核物理与核技术国家重点实验室, 北京100871; 2. 山东大学物理学院, 济南250100; |
| |
| 摘 要： | 使用聚焦粒子束(FIB) 在LiNbO3上刻蚀用于光子晶体的亚微米圆孔二维点阵, 研究了刻蚀束流、刻蚀时间和填充率等刻蚀参数对刻蚀结果造成的影响。为获得更好的刻蚀效果, 还采用了FIB的气体辅助刻蚀方法(gas-assisted etching , GAE) 。研究发现,与直接刻蚀结果相比,GAE 减小了反沉积效应, 得到了更好的孔形。禁带模拟计算表明, 与常规FIB 刻蚀出的锥形圆孔相比, 使用XeF2气体辅助刻蚀得到的这种侧壁更陡直的圆孔阵列构成的光子晶体禁带更趋近于理想光子晶体的禁带。
|
| 关 键 词： | 聚焦离子束 铌酸锂 气体辅助刻蚀 |
| 收稿时间： | 2009-04-14 |
Gas-Assisted Etching of Micro-Hole Lattice Array on Lithium Niobate with Focused Ion Beam |
| |
| XU Xuefeng,YAN Sha,WANG Keming,WANG Xuelin,XUE Jianming,WANG Yugang. Gas-Assisted Etching of Micro-Hole Lattice Array on Lithium Niobate with Focused Ion Beam[J]. Acta Scientiarum Naturalium Universitatis Pekinensis, 2009, 45(6): 937-940 |
| |
| Authors: | XU Xuefeng YAN Sha WANG Keming WANG Xuelin XUE Jianming WANG Yugang |
| |
| Affiliation: | 1. Institute of Heavy Ion Physics, State Key Laboratory of Nuclear Physics and Technology, Peking University, Beijing 100871;2. Department of Physics, Shandong University, Jinan 250100; |
| |
| Abstract: | Two-dimensional micro-hole lattice arrays with specified structure parameters were fabricated on LiNbO_3(LN) substrate by means of focused ion beam (FIB) etching, and the influence of etching parameters, such as spot current, etching time full rate, were investaged. In order to etch good quality holes, the authors used gas-assisted etching (GAE) with focused ion beam. The results show that GAE can reduce the effect of redeposition and obtain better hole profile compared with FIB etching. According to simulative calculation, the photonic bandgap of lattice array, etched by GAE with XeF_2, is more close to the ideal photonic bandgap. |
| |
| Keywords: | focused ion beam lithium niobate gas-assisted etching |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《北京大学学报(自然科学版)》浏览原始摘要信息 |
|
点击此处可从《北京大学学报(自然科学版)》下载全文 |
|
