首页 | 本学科首页   官方微博 | 高级检索  
     

适用于柴油基钻井液的洗油型冲洗液研究
引用本文:郭小阳,欧红娟,李明,辜涛,柳洪华. 适用于柴油基钻井液的洗油型冲洗液研究[J]. 西南石油大学学报(自然科学版), 2017, 39(1): 155-160. DOI: 10.11885/j.issn.1674-5086.2015.06.27.02
作者姓名:郭小阳  欧红娟  李明  辜涛  柳洪华
作者单位:1. "油气藏地质及开发工程"国家重点实验室·西南石油大学, 四川 成都 610500;2. 陕西中咨土木工程技术研究院有限公司, 陕西 西安 713702;3. 陕西长兴石油科技有限公司, 陕西 西安 710016
基金项目:国家重点基础研究发展计划(973计划)(2013CB228003)。
摘    要:针对柴油基钻井液易残留井壁和套管壁表面,影响水泥环胶结质量这一问题,进行了FYJ洗油型冲洗液研究:(1)建立表面活性剂的优选方法;(2)优选高效表面活性剂;(3)以清洗效率、润湿反转性能及其与柴油基钻井液和水泥浆的相容性为评价指标,获得综合性能良好的FYJ洗油型冲洗液。实验结果表明:(1)适用于洗油型冲洗液用表面活性剂应选用HLB值在12~15的阴离子型、非离子型或两者复配的表面活性剂体系,且加入表面活性剂的溶液表面张力(γ)接近或小于钻井液的临界表面张力(γc≈23~27 mN/m),而较优加量至少大于临界胶束浓度(CMC值);(2)FYJ洗油型冲洗液对不同种类的柴油基钻井液的清洗效率皆达到82%以上,有较好的抗温抗盐性;(3)该洗油型冲洗液与柴油基钻井液和水泥浆的相容性良好。

关 键 词:柴油基钻井液  表面活性剂  洗油型冲洗液  清洗效率  润湿反转  相容性  
收稿时间:2015-06-27

Flushing Fluid for Diesel-based Drilling Fluid Cleaning
GUO Xiaoyang,OU Hongjuan,LI Ming,GU Tao,LIU Honghua. Flushing Fluid for Diesel-based Drilling Fluid Cleaning[J]. Journal of Southwest Petroleum University(Seience & Technology Edition), 2017, 39(1): 155-160. DOI: 10.11885/j.issn.1674-5086.2015.06.27.02
Authors:GUO Xiaoyang  OU Hongjuan  LI Ming  GU Tao  LIU Honghua
Affiliation:1. State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, Sichuan 610500, China;2. Shaanxi China-Consulting Civil Engineering Technology Academy Co. Ltd., Xi'an, Shaanxi 713702, China;3. Shaanxi Changxing Petroleum Technology Co, Ltd., Xi'an, Shaanxi 710016, China
Abstract:A diesel-based drilling fluid (DBDF) is wildly applied in complex deep wells. However, its strong adhesion to the casing and the well would severely affect the cementing quality. To solve this problem, a study on the preflush system FYJ was conducted: (1) established an optimized method of a surfactant; (2) optimized the efficient surfactants; (3) evaluated indexes referring to the fluid flushing efficiency, the properties of wetting reverse, and compatibility with drilling mud, and we obtained a flushing fluid FYJ having a good comprehensive property. The results showed that (1) Anionic/non-ionic or mixed surfactants with HLB values of 12-15 should be used in preflush systems, the minimum surface tension of the surfactant solution ((γmin) should be close to or less than that of soaking surfaces of DBDF (γc≈23-27 mN/m), and the optimum addition amount of the surfactant should be greater than the critical micelle concentration (CMC value). (2) The preflush system FYJ can remove 82% of the DBDF attached to the well and casing walls, which have a strong temperature and salt resistance. (3) The preflush system FYJ provides good compatibility with DBDF and slurry, and it can effectively dilute the DBDF and slurry.
Keywords:diesel-based drilling fluid  surfactant  flushing fluid  cleaning efficiency  wettability reversal  compatibility  
本文献已被 CNKI 等数据库收录!
点击此处可从《西南石油大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《西南石油大学学报(自然科学版)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号