| C型环环向应力与加载载荷的公式推导与验证 |
| |
| 引用本文： | 练章华,梁建坤,王裕海,张强,牟易升. C型环环向应力与加载载荷的公式推导与验证[J]. 西南石油大学学报(自然科学版), 2019, 41(5): 161-168. DOI: 10.11885/j.issn.1674-5086.2018.08.03.01 |
| |
| 作者姓名： | 练章华 梁建坤 王裕海 张强 牟易升 |
| |
| 作者单位： | 1. “油气藏地质及开发工程”国家重点实验室·西南石油大学, 四川 成都 610500;2. 中国石油塔里木油田分公司, 新疆 库尔勒 841000 |
| |
| 基金项目： | 国家自然科学基金（51574198） |
| |
| 摘 要： | 基于任意C型环试样结构尺寸及其力学关系，建立了C型环内任意截面的力学模型，根据材料力学基本理论，推导出了其外壁和内壁任意一点环向应力与C型环试样加载位移、加载载荷之间的理论计算公式。为了验证本文推导的理论公式的正确性，建立了C型环试样的有限元计算的力学模型，当某试验要求C型环试样最大环向拉应力为650 MPa，对油管外径88.9 mm的C型环试样，通过有限元法和本文推导的理论公式对该结构工况进行计算和对比分析，得出有限元法和理论公式计算出需要施加的载荷和位移的误差分别为-1.82%和1.25%，证明推导文中推导的理论公式的正确性，为C型环硫化物应力腐蚀开裂（SSCC）和应力腐蚀开裂（SCC）实验加载参数的确定提供了简便的计算方法。
|
| 关 键 词： | C型环试样 理论公式推导 加载应力计算 有限元 应力腐蚀开裂 |
| 收稿时间： | 2018-08-03 |
Equation Derivation and Verification for Hoop Stress and Load of C-ring |
| |
| LIAN Zhanghua,LIANG Jiankun,WANG Yuhai,ZHANG Qiang,MOU Yisheng. Equation Derivation and Verification for Hoop Stress and Load of C-ring[J]. Journal of Southwest Petroleum University(Seience & Technology Edition), 2019, 41(5): 161-168. DOI: 10.11885/j.issn.1674-5086.2018.08.03.01 |
| |
| Authors: | LIAN Zhanghua LIANG Jiankun WANG Yuhai ZHANG Qiang MOU Yisheng |
| |
| Affiliation: | 1. State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, Sichuan 610500, China;2. Tarim Oilfield Company, PetroChina, Korla, Xinjiang 841000, China |
| |
| Abstract: | Based on the structural dimensions and mechanical relation of an arbitrary C-ring specimen, a mechanical model for an arbitrary cross section within a C-ring was established. According to the fundamental theories of mechanics of materials, a theoretical equation was derived to describe the relation between the hoop stress at any point on the outer and inner walls and the loading displacement and load of a C-ring specimen. To verify the equation derived in this study, a mechanical model of C-ring specimen based on finite element method was established. The C-ring specimen test required the largest hoop tensile stress to be 650 MPa. The results of the finite element method and theoretical equation were compared for a C-ring specimen with tubing outer diameter of 88.9 mm. The error of load and displacement obtained by using the finite element method and the theoretical equation were -1.82% and 1.25%, respectively. The results verify the theoretical equation, which provides a simple calculation method for determining the experimental loading parameters of sulfide stress corrosion cracking and stress corrosion cracking tests on C-ring. |
| |
| Keywords: | C-ring specimen theoretical equation derivation loading stress calculation finite element stress corrosion cracking |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《西南石油大学学报(自然科学版)》浏览原始摘要信息 |
|
点击此处可从《西南石油大学学报(自然科学版)》下载全文 |
