| Cr21节约型双相不锈钢的高温塑性 |
| |
| 引用本文： | 方轶琉,刘振宇,王国栋.Cr21节约型双相不锈钢的高温塑性[J].东北大学学报(自然科学版),2009,30(10):1429-1432. |
| |
| 作者姓名： | 方轶琉 刘振宇 王国栋 |
| |
| 作者单位： | 东北大学,轧制技术及连轧自动化国家重点实验室,辽宁,沈阳,110004 |
| |
| 摘 要： | 通过高温拉伸和高温压缩试验研究了两种Cr21节约型双相不锈钢在950～1150℃温度范围内的高温塑性,结果表明两种材料的高温塑性差异很大.通过温度、应变速率、相比例和显微组织4个方面的分析发现,适当增加稳定铁素体相元素和升高变形温度有利于提高Cr21节约型双相不锈钢的高温塑性.在较低温度较高应变速率热变形时,裂纹容易在被拉长的奥氏体和铁素体相界处形核并沿着相界在铁素体内进行扩展.
|
| 关 键 词： | 节约型双相不锈钢 高温压缩和高温拉伸试验 高温塑性 裂纹 |
Hot Ductility of Cr21 Lean Duplex Stainless Steels |
| |
| FANG Yi-liu,LIU Zhen-yu,WANG Guo-dong.Hot Ductility of Cr21 Lean Duplex Stainless Steels[J].Journal of Northeastern University(Natural Science),2009,30(10):1429-1432. |
| |
| Authors: | FANG Yi-liu LIU Zhen-yu WANG Guo-dong |
| |
| Institution: | (1) The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China |
| |
| Abstract: | Hot ductility of two kinds of Cr21 lean duplex stainless steels was investigated by high-temperature compression/tension tests in the range from 950 to 1150°C, and the results showed the obvious difference between them in hot ductility. The effects of temperature, strain rate, ratio of phases and microstructure on the hot ductility of the two kinds of stainless steels were discussed, and it was found that increasing of stabilized ferritic elements and deformation temperature are beneficial to the improvement of hot ductility. While deformation at comparatively low temperature and high strain rate, cracks tend to nucleate at the interface of elongated austenite and ferrite and propagate in ferrite along the interface. |
| |
| Keywords: | |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《东北大学学报(自然科学版)》浏览原始摘要信息 |
| 点击此处可从《东北大学学报(自然科学版)》下载免费的PDF全文 |
|
