首页 | 本学科首页   官方微博 | 高级检索  
     检索      

液相线铸造铝合金2618显微组织
引用本文:刘丹,崔建忠,夏克农.液相线铸造铝合金2618显微组织[J].东北大学学报(自然科学版),1999,20(2):4-176.
作者姓名:刘丹  崔建忠  夏克农
作者单位:东北大学材料与冶金学院;澳大利亚墨尔本大学机械与制造工程系
摘    要:采用液相线铸造法即在液相线温度铸造变形铝合金2618获得了金属半固态加工要求的细小、等轴的“非枝晶”组织,同时考察了铸造温度、冷却速度及再加热温度和时间对该组织的影响·结果表明,在一定冷却速度条件下在液相线温度铸造能获得适合于半固态加工的细小球形晶粒,并且该组织在再加热回半固态仍能保持稳定·

关 键 词:铝合金  液相线铸造  冷却速度  铸造温度  再加热  显微组织

Microstructure of Liquidus Casting Aluminum Alloy 2618
Liu Dan,Cui Jianzhong,Xia Kenong.Microstructure of Liquidus Casting Aluminum Alloy 2618[J].Journal of Northeastern University(Natural Science),1999,20(2):4-176.
Authors:Liu Dan  Cui Jianzhong  Xia Kenong
Abstract:Fine equiaxed nondendritic grains of primary microstructure needed by semi solid metal forming were obtained by means of liquidus casting a wrought aluminum alloy 2618 method,i.e. cast from its liquidus temperature. The influence of casting temperature,cooling rates,reheating temperature and time on liquidus casting microstructure was investigated. The fine global grains can be obtained by liquidus casting at a cooling rate and this kind of microstructure can still keep stable when it was reheated to semi solid state.
Keywords:aluminum alloy  liquidus casting  cooling rates  casting temperature  reheating  microstructure  
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《东北大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《东北大学学报(自然科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号