首页 | 本学科首页   官方微博 | 高级检索  
     检索      

喷丸及退火处理对1Cr18Ni9Ti合金抗高温氧化性能的影响
引用本文:马静,何业东,胡建文,高颖.喷丸及退火处理对1Cr18Ni9Ti合金抗高温氧化性能的影响[J].河北科技大学学报,2005,26(2):130-132.
作者姓名:马静  何业东  胡建文  高颖
作者单位:河北科技大学材料科学与工程学院,河北,石家庄,050054;北京科技大学北京市腐蚀、磨蚀与表面技术重点实验室,北京 100083;北京科技大学北京市腐蚀、磨蚀与表面技术重点实验室,北京 100083;河北科技大学材料科学与工程学院,河北,石家庄,050054
基金项目:教育部博士点基金资助项目(2000000815)
摘    要:研究了经过喷丸处理及400℃退火处理的1Cr18Ni9Ti合金试样在900℃空气中的循环氧化性能。经SEM,EDS分析及氧化动力学研究发现:喷丸处理虽然促进了铬的选择性氧化,但却使合金表面的压应力增大,所形成的氧化膜的抗剥落性能也不好;退火处理不仅使喷丸试样表面的应力得以消除,并且起到了低温预氧化的作用。经过退火处理的合金表面形成了附着性良好的选择性氧化铬膜,其氧化增重与氧化膜剥落量下降,起到了很好的保护作用,提高了合金的抗高温氧化性能。

关 键 词:喷丸处理  退火处理  氧化性能
文章编号:1008-1542(2005)02-0130-03
修稿时间:2003年12月29

Effect of annealing on the oxidation behavior of peened 1Cr18Ni9Ti alloy
MA Jing,HE Ye-dong,HU Jian-wen,GAO Ying.Effect of annealing on the oxidation behavior of peened 1Cr18Ni9Ti alloy[J].Journal of Hebei University of Science and Technology,2005,26(2):130-132.
Authors:MA Jing  HE Ye-dong  HU Jian-wen  GAO Ying
Institution:MA Jing 1,2,HE Ye-dong2,HU Jian-wen1,GAO Ying1
Abstract:Annealing at 400 ℃ for 1h is applied to shot peened 1Cr18Ni9Ti alloy, and their high-temperature oxidation properties have been studied. The analysis of SEM, EDS and the result of study show that although shot peening promotes the forming of protective Cr_2O_3 scale, it increases the compressive stress in the scales and the adhension property is poor; annealing eliminates the stress in the surface layer generated during peening and has function of low temperature pre-oxidation. Therefore, the high-temperature oxidation resistance of peened alloy after annealing is improved greatly.
Keywords:shot peening  annealing  oxidation behavior
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号