首页 | 本学科首页   官方微博 | 高级检索  
     检索      

9Cr5MoV钢的磁性分析与深冷处理
引用本文:孙世清,梁文瑞,张楠.9Cr5MoV钢的磁性分析与深冷处理[J].河北科技大学学报,2013,34(1):75-78.
作者姓名:孙世清  梁文瑞  张楠
作者单位:河北科技大学材料科学与工程学院
基金项目:河北省科技支撑计划项目(07212119D-2)
摘    要:采用SLX-80深冷处理系统对9Cr5MoV钢进行冷处理,采用综合物理测试系统的振动样品磁强计选件(PPMS-VSM)测试样品的室温磁性。钢在930℃淬火态、-80℃和-120℃冷处理态,样品中残余奥氏体含量分别为13.5%,11.7%和10.1%,深冷处理(-120℃)较冷处理(-80℃)能更有效地减少钢中残余奥氏体。950℃淬火态钢测得最大硬度值(65HRC),淬火后-120℃深冷处理可使钢的硬度值提高至66HRC。950℃淬火再140℃低温回火后,-120℃深冷处理可使钢的硬度提高约1HRC。

关 键 词:冷轧辊  深冷处理  残余奥氏体  磁性  硬度
收稿时间:2012/7/19 0:00:00
修稿时间:2012/11/27 0:00:00

Magnetic analysis and deep cryogenic treatment of 9Cr5MoV steel
SUN Shiqing,LIANG Wenrui and ZHANG Nan.Magnetic analysis and deep cryogenic treatment of 9Cr5MoV steel[J].Journal of Hebei University of Science and Technology,2013,34(1):75-78.
Authors:SUN Shiqing  LIANG Wenrui and ZHANG Nan
Institution:(School of Materials Science and Engineering,Hebei University of Science and Technology,Shijiazhuang Hebei 050018,China)
Abstract:SLX-80 cryogenic treatment system is used for cryogenic treatment of 9Cr5MoV steel,and room temperature magnetization of samples is performed in vibrating sample magnetometer option of physics property measurement system(PPMS-VSM).The contents of retained austenite in the samples quenched at 930 ℃,then cryogenic treated at-80 ℃ and-120 ℃ are respectively 13.5%,11.7% and 10.1%.Compared with cryogenic treatment at-80 ℃,deep cryogenic treatment at-120 ℃ is more effective to reduce the retained austenite in the steel.The maximum hardness of the steel quenched at 950 ℃ is measured to be 65 HRC,while further deep cryogenic treatment at-120 ℃ improves the hardness of steel to 66 HRC.After quenching at 950 ℃ and tempering at 140 ℃,the deep cryogenic treatment at-120 ℃ may enhance the hardness of steel approximately by 1 HRC.
Keywords:cold roller  deep cryogenic treatment  retained austenite  magnetization  hardness
本文献已被 CNKI 等数据库收录!
点击此处可从《河北科技大学学报》浏览原始摘要信息
点击此处可从《河北科技大学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号