首页 | 本学科首页   官方微博 | 高级检索  
     检索      

1700板坯中间包温度场的数值模拟及其优化
引用本文:吴雨晨,闫小林,李俊国,曾亚南,李守章.1700板坯中间包温度场的数值模拟及其优化[J].河北理工大学学报(自然科学版),2009,31(3):34-38,44.
作者姓名:吴雨晨  闫小林  李俊国  曾亚南  李守章
作者单位:河北理工大学,冶金与能源学院,河北,唐山,063009
摘    要:以1700板坯中间包为研究对象,应用FLUENT软件计算了中间包的温度场.结果表明:原型中间包内钢液温度分布不合理,两个水口出口温度不一致,且温降较大.优化后中间包内钢液温度分布更加合理,尤其是坝体高度555 mm,并设导流孔的方案3为最优方案,此时中间包内钢液最低温度为1820.6 K,最大温差为5 K左右,进出口温差为1.9 K.

关 键 词:中间包  温度场  数值模拟  结构优化

Numerical Simulation and Optimization of Temperature Field in 1700 Slab Tundish
WU Yu-chen,YAN Xiao-lin,LI Jun-guo,ZENG Ya-nan,LI Shou-zhang.Numerical Simulation and Optimization of Temperature Field in 1700 Slab Tundish[J].Journal of Hebei Institute of Technology(Natural Science Edition),2009,31(3):34-38,44.
Authors:WU Yu-chen  YAN Xiao-lin  LI Jun-guo  ZENG Ya-nan  LI Shou-zhang
Abstract:The temperature field distribution in a tundish applied to 1700 cast slab was simulated by Fluent Software.The result shows that the distribution of molten steel temperature field in original tundish is unreasonable.It suggests that the temperature of effluent from one gap was different from the other,and the different value between the temperature of effluent and influent was quite large.The temperature field distributions of molten steel in the optimizing tunish were reasonable.When the dam in tunish was 555 mm high and there were weep hole on the dam,the lowest temperature of molten steel was 1820.6K.In the optimizing tunish,the difference value of the molten steel temperature in tunish was about 5K,and the difference value between effluent and influent was 1.9K.
Keywords:tundish  temperature field  numerical simulation  configuration optimization
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号