| 铝合金轮圈压铸充型凝固过程模拟分析 |
| |
| 引用本文： | 杨勇,陈晓泽,葛晓宏.铝合金轮圈压铸充型凝固过程模拟分析[J].厦门理工学院学报,2011,19(2):11-13. |
| |
| 作者姓名： | 杨勇 陈晓泽 葛晓宏 |
| |
| 作者单位： | 厦门理工学院机械工程系,福建厦门,361024 |
| |
| 基金项目： | 厦门市科技计划指导性项目 |
| |
| 摘 要： | 针对铝合金的压铸工艺特点和充型凝固过程的不透明性,采用华铸CAE软件对铸件进行模流分析,预测铝合金轮圈压铸缺陷位置,优化模具结构设计.模拟结果显示,采用双流道充型平稳,温度场分布均匀,具有较少的气体夹杂和冷隔等倾向,压铸件整体质量较高.
|
| 关 键 词： | 压铸 华铸CAE 充型 凝固 铝合金轮圈 |
Simulation of Filling and Solidification of an Aluminum Alloy Rim in Pressure Die Casting |
| |
| YANG Yong,CHEN Xiao-ze,GE Xiao-hong.Simulation of Filling and Solidification of an Aluminum Alloy Rim in Pressure Die Casting[J].Journal of Xiamen University of Technology,2011,19(2):11-13. |
| |
| Authors: | YANG Yong CHEN Xiao-ze GE Xiao-hong |
| |
| Institution: | (Faculty of Mechanical Engineering,Xiamen University of Technology,Xiamen 361024,China) |
| |
| Abstract: | In this paper,the filling and solidification of an aluminum alloy rim in pressure die casting was simulated by HuaZhu CAE software,which can forecast the position of the defects during the casting process of the aluminum,and optimize the process of die mould design that is good for the die casting process characteristic of aluminum alloy and the opacity of mould filling process.The simulated results show that a smooth filling,uniform temperature distribution,less gas inclusion and cool shut,and better quality of die casting parts can be obtained by using double vane die casting system. |
| |
| Keywords: | pressure die casting numerical simulation filling solidification aluminum alloy rim |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
