| 矿井提升机主轴的应力应变分析 |
| |
| 引用本文： | 李华伟,晋民杰,高杰,刘华伟,裴培.矿井提升机主轴的应力应变分析[J].太原科技大学学报,2011,32(4):296-300. |
| |
| 作者姓名： | 李华伟 晋民杰 高杰 刘华伟 裴培 |
| |
| 作者单位： | 太原科技大学机械电子工程学院,太原,030024 |
| |
| 基金项目： | 山西省科技攻关项目(20100321058-02); 太原科技大学博士科研启动基金(20102017) |
| |
| 摘 要： | 利用SolidWorks软件建立了双卷筒缠绕式提升机主轴的三维模型,利用ANSYS软件对其在六种工况下进行静力学分析。实现了主轴静强度和静刚度的校核,得到了主轴的应力应变分布规律,为双卷筒缠绕式提升机主轴结构的改进设计、寿命计算等提供了依据。
|
| 关 键 词： | 双卷筒缠绕式提升机 六种工况 主轴 ANSYS 有限元分析 |
Stress and Strain Analysis of Mine Elevator Shaft |
| |
| LI Hua-wei,JIN Min-jie,GAO Jie,LIU Hua-wei,PEI Pei.Stress and Strain Analysis of Mine Elevator Shaft[J].Journal of Taiyuan University of Science and Technology,2011,32(4):296-300. |
| |
| Authors: | LI Hua-wei JIN Min-jie GAO Jie LIU Hua-wei PEI Pei |
| |
| Institution: | LI Hua-wei,JIN Min-jie,GAO Jie,LIU Hua-wei,PEI Pei(School of Mechanical Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China) |
| |
| Abstract: | SolidWorks software was applied to establish a two-reel winding elevator shaft of the three-dimensional model,and ANSYS software was used for static analysis under six loadcases,and then the static strength and static stiffness of the spindle were achieved,thus the stress and strain distribution rules were obtained,which could provide the basis for the improved design and life calculation of the double-drum winding elevator shaft structure. |
| |
| Keywords: | two-reel winding of elevator six loadcases shaft ANSYS finite element analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
